Nvidia Quadro 2000: DisplayPort not working

Hello,
I have a brand new S30 with a Nvidia Quadro 2000 card (latest drivers from Nvidia installed). Output to one display (LT2452p) through the DVI port is ok, but the display stays blank when connected via any of the the DisplayPort outputs. Since I want to attach 2 displays, I need to use the DisplayPort connectors...
Any hint on how I could check whether the graphic card itself is faulty?
Thanks in advance!
--Pierre
Solved!
Go to Solution.

Hello pierrech,
Can you use another Display Port cable and another Monitor with a Display Port input to make sure it's not the monitor or the cable? If that doesn't work, the graphics card (possibly the system board if the graphics card is welded onto it), will need to be replaced. I hope that helps.
A+ Certified

Similar Messages

Nvidia Quadro 2000

Is the PNY Nvidia Quadro 2000 a sufficient card to handle HD footage with Premiere Pro CS5 with Windows 7? If not, what is the lowest model Nvidia card that will work?

Have you used the Fermi 460 with Premiere Pro CS5 and HD footage? Does it handle the encoding and rendering well?

When I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

when I am open file with adobe Pro and reader the resolution in my computer failing, change the resolution from 1920x1200 to 800x600. my video card is nvidia quadro 2000. w7 & 32 bits

Hi fabiangs,
I'm not sure that I follow. Are you saying that when you open a PDF file in Acrobat or Reader, that the display resolution changes automatically on your system?
What version of Acrobat/Reader are you using? Do you see this same issue in other files/applications?
I look forward to hearing back from you.
Best,
Sara

Strange: NVidia Quadro 2000 freezes after the 6th video mode switching

Asus P8P67 with NVidia Quadro 2000 and some 24" Asus monitor (SVGA/DVI/HDMI; DVI being used) and the most strange behavior:
1. if starting with display manager: after 6th sequence: Ctrl-Alt-F1, Ctr-Alt-F7 or 6th logout from my DE,
2. if starting with no display manager: after 6th `startx' and logout
my monitor and keyboard freeze (the monitor gets dark gray or black, sometimes with `no DVI signal' message). If I connect remotely and kill all GUI applications it unfreezes but I'm unable to start GUI once again. The most strange thing is that there are absolutely no error messages in logs.
Tried 295.53 and 295.49 drivers,
tried `vga=normal' boot option
tried `acpi_osi=Linux' boot option
tried changing USB ports and the keyboard
tried removing any `*hdmi*' modules
tried...
I have no idea how to deal with this problem. Seems like some video resource exhaustion but ...
*any* help welcome!

Solved by https://wiki.archlinux.org/index.php/Nv … s.22_issue
A new file: /etc/X11/xorg.conf.d/20-nvidia.conf :
Section "Device"
Identifier "Device0"
Option "ModeValidation" "NoTotalSizeCheck"
EndSection
fixed it.
Last edited by quayasil (2012-09-03 14:07:36)

GPU/CPU Nvidia Quadro 2000

Hi community ! i recently bought an Nvidia Quadro 2000K. Ruining CS6 on windows 64 bits. I can´t access the CUDA options and certainly can not select GPU raytracer.
I found a tut to put manually the card name in a txt raytracer_supported_cards but didn´t work...
I do not care about the raytracer (i don´t use it) but my question is
by not being able to see/display the Cuda cores, etc... is after effects really using all the "power" in the graphics card ? the 2 gb ram, and all the cuda cores ?
Suggestions, advice, help is more than welcome ! Thanks Marcos.

The GPU is only really used in AE for acceleration of the ray-traced renderer. If you're not using it (and most people don't these days), I wouldn't worry about your GPU at all. (Unless you have a third-party plugin like Element 3d that uses the GPU.)
More info here.

HP 2000 Notebook Screen not working.... Still

I have an HP 2000 Notebook that is running windows 8 64 bit and the screen on the laptop will not work. When I turn on my computer, the screen won't show but the fans and everything els will work as normal. The capslock button does blink in a 2 blink series, which according to HP means bios error, but I believe that is not the proublem. I have tried to fix this proublem by all of the following:
- Holding the winsows key and b, then pressing the power button (for one second) which should direct me to my bios update but it doesn't becuase i still can't see anything
- Switching the ram into different slots, I have 2 sticks of 4 gigs, I have also tried just one stick
- Taking out the battery and unplugging it and holding the power for 60 secconds and plugging it back in... multiple times (Getting rid of extra charge)
- Checked if the black light was dead but it wasn't becuase normaly if you take a flashlight to the screen you can still see it slightly but I can't see it at all
The weird thing is, is that I can plug it into an external monitor and it will work. Also every now and then the screen will work for about a day but then the next day it won't work again. I even tried calling HP, but for them to talk me through it and try to fix it, it cost $75.

Hello, @jiddy30
Welcome to the HP Forums.
I understand that you're having issues with a black screen on your notebook. I will try to assist you with this.
As you're troubleshooting led to trying an external monitor and that is working, the issue is more then likely with the actual notebook display itself. I would guess with it working at times, it could be a loose wire in the display. It could also be the display.
If you're comfortable you can check this yourself, Maintenance and Service Guide - this has visuals and instructions on replacing components. It also works as a guide when it comes to opening a notebook to just check wires and components.
I hope this can help some.
Thank you for posting on the HP forums.
I worked on behalf of HP.

Caution, nVIDIA Quadro FX cards may not support DirextX 11

Anyone thinking or acquiring any of these cards be careful if DirectX 11 is something you will need in the future.
During September when researching the Quadro FX cards one of my criteria was that it supports DirectX 11.
At that time their latest driver version indicated it does support DirectX 11. Only recently when running a program that requires it did I find out the card does not support DirectX 11 !
So now I've got to look at something else to replace this card. Anyone here want it?
Not so cheerful,
Michael

The card in question is the Quadro FX 3800.
However, my colleague has the Quadro FX 4800 and will run into the same problem.
Regarding running the DirectX update from Microsoft, the answer is yes I did.
The NVIDA Customer Care representative's response was as follows (I really wish one could copy and paste this):
"I apologize for the inconvenience. I must add though that the 259.81 Driver Package is generic to a lot of devices. The idea behind this is to streamline the process of driver packaging. Whilst the 259.81 drivers support DX 11 it requires a card to support DX 11 to work successfully."
Checking NVIDIA's product lineup this means only the 5000 series and up support DirectX 11.
What disturbes me, that there is no mention in the driver's web site description indicating this card is excluded. To the contrary it is listed as being included!
As well the fact that this "customer care" representative alludes to my incompitence in not checking the specifications...
Cheers
Michael

Microsoft Comfort Keyboard 2000 "n" key not working

First off any n
that I type is copy pasted.
I bought the Comfort Keyboard 2000 less than
5 days ago and already the n key
has stopped working.
I am using Windows
7 64 bit and all other keys on the keyboard
work perfectly fine. All I could find
help for were the non-character keys.
This is very disappointing to me because
of the short amount of time it took for this product to stop functioning.
Thank you if you can
help.

Hi,
I suggest
removing and reinstalling the device driver.
http://www.microsoft.com/hardware/en-us/d/comfort-curve-keyboard-2000
If the issue persists, it is recommending contacting Microsoft Hardware support and let them examine the hardware.
http://www.microsoft.com/hardware/en-us/support
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Nvidia GeForce FX Go5200 drivers not working with my New HD display HELP

Are there any updates for the nvidia GeForce FX Go5200 or generic drivers so i can use my brand new, beautiful, Samsung 226bw HD Lcd??
please help me.. i've searched the internet high and low for support, even called apple care, and i can't find help anywhere..
please help!!
does anyone know how to modify drivers? many pc users have been able to do it, but i don't know anything about code so please help me
I love my powerbook and don't want to replace it, but this new display may make me do that, i need the 22"'s for designing work and don't want to go back to my 17" display.

I'm having the same exact problem, only I've got the Samsung 225BW. I've spent all day on the phone with Samsung tech support to no avail, and could not reach anyone at Nvidia. Tried all the usual steps to adjust the resolution, but it will NOT reset, neither manually nor automatically, to the "optimum mode" of 1680x1050.
Have you had any luck yet? I've only had my display for a few days, and it will work on 1600x1024 and below, nothing higher.
There is no option in the menu for the 1680x1050! Making me crazy, because somehow it auto-set to the 1680x1050 when I first plugged it into my Powerbook G4, but now will not revert back to that.
Also, I searched for the driver downloads, and the only ones I found were for Windows.

[Solved] AUR: Nvidia legacy drivers for MX4000 not working?

Hi.
I'm attempting to turn an old Dell machine I've acquired into a 720p HTPC. I've already tested XBMC out on this machine via WinXP, and considering I've always gotten better video playback through Linux, I thought I'd try out a minimal Arch XBMC install.
Problem is that this card, the Geforce 4 MX 4000 (128MB AGP x4), is no longer supported in the current Nvidia packaging.
After reading the wiki, I configured my makepkg with the native parameter, built, and installed the AUR's 173xx Nvidia package.
When attempting to load X after configuring, I noticed in the output that it recognized the card, but notified me that I was only supported under the lagacy 96xx packaging. I then installed the nvidia-96xx, and nvidia-96xx-utils, packages from the aur.
After attempting either a non-configured X, or with one, I'm getting the message that my card isn't recognized. This is despite the fact that the vesa, and nouveau, drivers see it just fine. FYI - I boot the kernel with the 'vga=792' parameter in case that makes a difference.
The messages received when Xorg fails were something like the following.
WARNING
This server has a video driver ABI version of 12.0 that is not supported by this driver
AND
Fatal server error:
no screens found
I'm posting this from Windows, and I can't give you any net feedback while in Arch.
Last edited by *nixer (2012-06-29 23:23:27)

Well... after doing a more thorough web search, I found the Catalyst unofficial Arch repos here.
- http://catalyst.apocalypsus.net/
I tried first to add them to my pacman.conf and install them, but Arch's new security measures said no-no-no. I have no clue how to add new repos as trusted after the initial pacman-key --init, so I manually downloaded the xorg packages needed.
As I had truly done a minimal net install followed by a 'pacman -S xorg-server xorg-server-utils xorg-xinit xterm', the only incompatibility messages I received were for the xf86-video-vesa and xf86-input-edev packages.
This was what was involved in getting this to work.
- Do core net install of Arch system, and reboot.
- Install minimal xorg from current repos through pacman via...
pacman -S xorg-server xorg-server-utils xorg-xinit
- Manual download, and downgrade to, xorg-server-1.10.4-1, xf86-input-evdev-2.6.0-3, or any other required xorg packages from the Catalyst repo.
- Install nvidia-96xx, and nvidia-96xx-utils, packages from AUR.
- Running 'X -configure' reported missing file error. Do a search for the missing file name minus the '.0' extension, and create a softlink with the extension included.
- Rerun 'X -configure', move xorg.conf.new file to /etc/X11/xorg.conf, run 'nvidia-xconfig'.
BTW - the command line browser 'links' will help a lot before you have a GUI setup. In my case XBMC.
Last edited by *nixer (2012-06-29 23:27:11)

Distiller 5.0.5 and Office 2000 - creating pdf not working

I am using XP Home Edition SP2, Distiller 5.0.5, and Office 2000
Can not make PDF with 2000 WORD or 2000 EXCEL.
- WORD: file > print > Distiller results in the conversion hanging up. The file can not be deleted from the print que until the computer is restarted. I can not create a postscript file by unchecking the "don't send fonts" check box and check "print to file". Doing so results in a "prn" file.
I can create PDF with PUBLISHER if I create a postscript file by unchecking "Dont sent fonts", checking "print to file", adding "ps" at the end of file name, then clicking on the ps file, does result in a pdf file
I can create pdf files with file > print > distiller in PhotoShop and PaintShop Pro

After creating the PRN file, open the file in Distiller and see if you get a PDF. If so, then look for AcroTray running in the background. If not, then you need to start it (it is in the Acrobat 5/Distiller folder).

M78 second displayport not working

I have a M78 thinkcentre machine type 1662 model 1A0 that has a second optional DisplayPort. The VGA and one display port work fine but i cannot get the second display port to work. I have downloaded the drivers for the AMD A75 chipset and still no luck. The system is on the US government network running Windows 7 64 bit so I am unable to run the diagnostic software for auto detect. Any help would be appreciated.

Hello Henrik,
thanks for the quick reply.
Indeed I've tried to get the DP running both via the Windows 7 Control Panel and the "Intel Graphics and Media Control Panel", but the results stayed the same. So when I connect any of my three adapters to the DP, nothing happens.
Unfotrtunately, I don't have any dock at hand to try if the the connection between the dock's DP and the monitors would work (and I hesitate to spend more than 100€ just for a test run :-) )
I also do not have a monitor with a nativ DP input, just several others with VGA and DVI. And none of them worked.
However, since the DP connection does not show up in the display's option even after forcing to detect display (as does VGA and the FlexView display), I somewhat doubt that a nativ DP monitor will work.
Nevertheless, I will look around at the desktops of my colleagues, maybe there is a monitor with a DP input.
Thanks,
Sebastian
/edit:
Henrik, when you detach all of your monitors (and your dock of course) and force to detect displays within the display's option of the Windows Control Panel? Does both VGA and DP appear under "multiple displays"? I just get a pull-down menu with the option: "Ty to connect anyway: VGA" and "Try to connect anyway: Composite"

Lenvo M81 Displayport not work

Hi,
The computers we are using are M81 7518-B1U. When the monitors switched to NEC E223W with the displayport connected. No video. I switched it back to VGA monitor. I updated the BIOS and the video. Then I switched back to the new NEC monitor with the displayport. No POST No video. Please help!
Solved!
Go to Solution.

Many DisplayPort cables are just bad. Only few are actually certified,
Disclaimer: While I do work for Lenovo Partner, all my contributions are my personal, non-official and not that of Lenovo or my employer.

Nvidia 560 Ti one fan not working properly

I have a 560 Ti card which has worked well for the slightly over 3 years that I've had it, although yesterday when I turned my computer on I noticed a noise coming from my computer which turned out to be one of the fans on the graphics cards. It begins spinning, gets up to the speed of the working fan, then there is a sound like a motor revving and it stops spinning completely. This happens when I'm idling on my desk top and my GPU is about 40 degrees celcius.
If I launch a game and my GPU goes up to 50-70 degrees celcius the sound actually stops. The fan in question begins spinning continuously, but at a lower speed than the other fan on the card.
I figure this is some kind of fan motor malfunction but I'm not positive. I know there's programs that can control the fan speed on a GPU, are there any that can control them separately?

no, you can't control them separately
you have to replace the FANs, both at once
or replace the entire cooler

SCXI-2000 chassis does not work.

Hi, I'm trying to configure my SCXI-2000 with a SCXI-1200 and SCXI-1121
modules. I read in the notes of NIDAQ, that I would have to reprogram that
chassis with the rscxi.dmg file. But the system just tell me that can't
reprogram the chassis. I'm using a remote system, with an RS-232 null cable
modem., windows 98 and version 6.0.1 of NI-daq.
Please I would be very grateful for any tips.
It's my final project in the university.
Thanks.
Jose Luiz - Rio de Janeiro.Brasil

Jose,
Without looking into your problem too deeply, I would suggest visiting our
SCXI troubleshooting page, which can be found by following links through ni.com
>> support >> daq help >> scxi help .
The direct link is as follows; these pages are pretty robust with
install/config information:
http://www.ni.com/support/trouble/daq/scxi/
Regards,
Rich
NI
Jose Luiz Lires Domingues wrote:
> Hi, I'm trying to configure my SCXI-2000 with a SCXI-1200 and SCXI-1121
> modules. I read in the notes of NIDAQ, that I would have to reprogram that
> chassis with the rscxi.dmg file. But the system just tell me that can't
> reprogram the chassis. I'm using a remote system, with an RS-232 null cable
> modem., windows 98 and version 6.0.1 of NI-daq.
> Please I would b
e very grateful for any tips.
> It's my final project in the university.
> Thanks.
> Jose Luiz - Rio de Janeiro.Brasil

Nvidia Quadro 2000: DisplayPor​t not working

Similar Messages

Maybe you are looking for

Nvidia Quadro 2000: DisplayPort not working