NVIDIA Quadro FX 5800

I have a question, Can i use with my Mac Pro NVIDIA® Quadro® FX 5800 Graphic card?
this card work with Mac Pro ?
Ty

You have to buy the card from Apple or it will only work in Windows Boot Camp Mode.

Similar Messages

NVIDIA Quadro FX 5800 in a 1st Gen Mac Pro?

Hello, is it possible to use the new NVIDIA Quadro FX 5800 in a 1st Generation Mac Pro?

Not if it doesn't have EFI32 ROM code (firmware) on it. Any card to run in OS X needs special EFI firmware, and different for 2008 and before.
Of course, if you want to use it in Windows, should be able to.

Nvidia Quadro fx 5800 w premier pro

Hi,
I am looking at getting the Nvidia quadro fx 5800 to be used with Premier Pro. I saw a while back that Premier Pro has a button to use that graphics card. It made it really fast to edit HD and 3D footage. Does it still have that button in the latest version?
Thanks,
Mike

Old dual Xeons are not the very fastest now, but going for a complete new system is pretty costly.
If you think about dual Xeons, think about Xeon E5-2687W or E5-4650, but that will cost quite a lot. You have to calculate on spending more than $ 15K for such a system. However, these are octo cores. The alternative is a single i7-39xx and overclocking. For some ideas of configurations, look at PPBM5 Benchmark or PPBM6 Benchmark Results Table. Notice you have to be registered and logged in to access this last page. This may contain some information that is interesting too: Intro Part 1

Nvidia quadro FX 5800 4GB compatible with D10 Workstation?

Hello , I bougth a video card Nvidia quadro FX 5800 4GB, the question is If i get a cable 6 pin to 8 pin would the card work or would my workstation explote or something???
Thank you.
Solved!
Go to Solution.

Thank you guys , I installed the card and it works perfectly...
I must say that is incredible the amount of polys that this card moves... I move more than 1200000 like if it was only a few hundred polygons.

Quadro FX 5800 in D20/S20?

can the D20 or S20 run the Quadro FX 5800?
(mod edit: changed title to match new thread)
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Solved!
Go to Solution.

like i said above, the D10 should support the 5800 because the 4800 works in mine and they're based off the same generation of architecture and BIOSes. the S10 is an unknown but i'd be surprised if it didn't work.
in fact, here's some evidence: /t5/ThinkStation/Nvidia-quadro-FX-5800-4GB-compatible-with-D10-Workstation/m-p/116418
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

NVIDIA Quadro FX 5600/5800

Hello everyone. I wonder if Apple will bring back Nvidia Quadro cards to the new MacPro line up. The option is gone from the Configure your MacPro page. Any idea? Thanks a lot!

Using it in Windows would still work, just not output possibly in OS X.
But if you have a 2007 (3.0 8-core came out in March '07) I would guess "No" and you'll need to look elsewhere - maybe holding off until later. There's some Harmonic Convergence of these Mac Pros, Snow and maybe Nvidia wasn't ready when Intel and Apple were.
Your .sig has only OS. If your Mac Pro is 2008, you probably don't yet need to upgrade but if you are using FX with it, I would think it would work, but take it some place and test it. See if you can set up an appointment with a Genius etc even and see if they will do that for you before making a purchase.

Benefit of using Quadro FX 5800 vs. GTX 580 in CS6... Is there any?

I've been looking around and could not find a good justification to use a Quadro FX 5800 vs. GTX 580. Is there something that I am missing about the Quadro?

I have a question for you on the GTX 680, why do you and others say that the GTX680 is hamstrung by the 256-bit bus when the memory bandwidth of the GTX580 is 192.4 GB/s and the memory bandwidth of the GTX 680 is essentially the same at 192.2 GB/s. The specifications show that despite a narrower interface that have much faster memory for the 600 series (Data rate of 6 GHz versus 4 GHz) Incidently there is a serious memory clock rate mistake on the nVidia page on the GTX 680 specs. For backup I had to go to EVGA's specifications
anat_usa, go with the GTX 6xx family there is now a new GTX 670 with either 2 GB of VRAM or 4 GB of VRAM. You will be much happier in the long run.

Nvidia quadro 4000 or 5000 in Mac Pro

Hello all,
I have this question that I already make to a sale advisor in a Mac store and he do not know what to answer and also I do it to a technical Mac sales agent and again nothing.
I do not own a Mac pro yet, I am looking to buy one becuase is the only system that can hold (in a stable way) both Mac OS X and Windows 7.
I am a professional working with 3D content creation, CAD design and digital video and I want to be able to do pro 3D content with Windows 7 and also working in pro videos in Mac OSX. The actual graphic cards for the Mac pro 2010 are intended for video games instead of professional production (this is the info posted in the AMD/ATI website when one do the search for Radeon 5770 and 5780, of course they can handle some 3d content but not as the latest generation of Nvidia cards)
My question is:
Can I use a Mac pro with one of those ATI cards installed in the 1st PCIe 2.0 16x port for the MAC OS X and then install a Nvidia Quadro 4000 or 5000 in the second PCIe 2.0 16x port for Windows 7? (given the fact that Nvidia do not have even beta drivers for Mac OS X for those types of cards yet)
Im thinking that I can use the Mac with the ATI and then when swiching to Windows (trough Boot Camp) using the Nvidia Quadro but I am not sure if this is possible and if installing another card will created probs. and if is posible how to relate each card to each OS.
I ask this before having the Mac becuase I am planing to make a huge inversion on it and I want to be sure about this. (The specs. will be 32gb ram, 512gb ssd, 3x2tb hdd, 2x2.93ghz6c xeons)
Thank you all and I will be pleased to heard any comments or suggestions.

The Quadro FX 5800 is launching at $3,499, and its spec sheet looks well furnished: 240 stream processors, fill rate of 52 billion texels per second, 128-bit precision, true 10-bit color support, 102GB/s memory bandwidth (which should translate to an 800MHz GDDR3 clock speed, if my math is right), and "interactive 4D modeling with time lapse capabilities." Nvidia says the Quadro FX 5800 should be well suited to applications like "oil and gas exploration, medical imaging, styling and design, and scientific visualization."
http://techreport.com/discussions.x/15866
First announced fall-winter 2008
http://www.nvidia.com/object/productquadro_fx_5800us.html
If you wanted to use nVidia's Quadro CX to speed up CS5, it is Windows only, and the Mac only has TWO 6-pin connectors. So even though Quadro 5800 power is under 200W there are no more aux power connectors. Though you can try to add a small 450W PSU for graphics 2 x 8-pin./2 x 6-pin) it gets messy running from the 2nd optical drive bay and tight fit-impossible for cables. Not designed for dual graphic card power.
The GTX 285 EVGA came out for Mac last year but drivers have been a problem with performance and a year later 10.6.4 and nVidia rushed to post a patch but there has been no word now that the GTX 285 went EOL. What's up with that?

Speed Comparison between Quadro FX 5800, 4800, 3800

Question: Speed Comparison between Quadro FX 5800, 4800, 3800
Both Adobe and Nvidia technical support said they do not have speed comparison benchmarks on the same Windows 7, 64 bit computer for both rendering and encoding between the Quadro FX 5800, 4800, and 3800. Does anyone know of such speed comparisons. Thanks in advance.

I just had a new computer built using a 6 core AMD processor and 16 gb Ram, cs5, etc. Is it possible for me to apply your benchmark and how would I do it?
Thanks,
John Rich

NVIDIA GeForce 8600M GT vs. NVIDIA Quadro FX 570M?

I just have a PC vs. Mac question, as I am looking at the new MacBook Pros. Which of the following NVIDIA processors is the best for intense graphic applications? Why does Mac only have 1 option, and is it superior to the PC options?
PC
NVIDIA Quadro FX 570M
NVIDIA QUADRO NVS 140M
Mac
NVIDIA GeForce 8600M GT
Many thanks!

what do you want to do with such devices, work, play, and specifically which software?
usability is often ignored by people who get swayed by paper-based specs, and it is important to know what you are going to do with a machine before making up your mind, not just which processor and hardware has a .01 percent coolness factor above the other.
I am somewhat biased, for I have developed an intense distrust, disenchantment, and pretty much an aversion to what you would call "PC" software and OSes. Twenty years of DOS and Windows have left me no fond memory, if not for the fact that I know how to fix a lot of software and hardware problems (you learn when you are constantly confronted to problems, and problems abound in the world of Windows).
A Macbook Pro is a beautiful machine, and it is hassle free a good 90%+ of the time, you can install Windows if you must anyhow, but Apple doesn't sell for cheap. Mind you, most high-end PCs do not cost much less anyhow, just the low end ones.
The 8600M GT card supports DirectX 10, can play even Crysis on a 32-bit Windows version very well (I play it from time to time, beautiful), but it isn't a 8800 card, nor is it the best card in all of laptop PCs. I do consider the Macbook Pro a desktop replacement, and I have very intensive use of my machine (scientific software for academics and industry, video games, multimedia, you name it).
So if you must play the latest game, and I mean the latest, with the highest frame-per-second count of all your friends, don't go for a 8600M GT, (ii) for a laptop anyways (laptop were never, never meant to compete with desktop-grade hardware, no matter what you local wise arses will tell you), and (iii) buy a console instead. BUT, if you want to play most games, very well, and you are concerned with media editing, usability, stability, reliability, etc., a Macbook Pro is a beautiful thing to have...
Cordially,
Dr Sly

Kernel Panic Nvidia Quadro Pro 4000 CC14 MAC PRO 10.9.4 mavericks

I get kernels panics constantly when using CC14 lightroom and photoshop.. And this is causing me to loose thousands of dollars. I have searched for months have lost thousands of dollars in work, have trued to contact support only to be sent to community forums which i get no response...o
THEREFORE.....
Allow me to waste more time by contacting this unresponsive company.
i constantly get Kernel Panics when using CC14 associated with my NVIDIA Quadro 4000 2048 while using cc14 photoshop and lightroom since I updated to Maverick 10.9.4.
I have been searching for fixes for months, i have updated everything, every driver, and this has costed me THOUSANDS of dollars in pay i am unable to receive because my %^&* computer keeps crashing.
Now i am pissed! I have consulted APPLE and even after pushing me up to the top level. they still read off a piece of paper. ! i just wanted to go back to osx before mavericks which i was having NO ISSUES but no one seem to have a clue at apple how to even turn one on.
1. i am NOT doing a master restore and I NEVER had a problem before Mavericks and CC14!!!
2. Every driver is updated every firmware is updated
3. there is NOTHING RUNNING IN HTE BACKGROUND
4. i did an smc and reset pram
5. ran disk utility -- no problems
6. searched for answers for months.
7. and by the way..... photoshop cc14 does not save your work on a crash. it saves what you already saved
I AM TIRED OF WASTING MY TIME TRYING TO GET ANSWERS WHEN I ONLY GET IGNORED.
this is an issue with my nvidia quadro pro 4000 video card and -- adobe and - mavericks.
MY system is high end, mac pro 5,1 Processor 2 x 2.93 GHz 6-Core Intel Xeon Late 2010 20 gig ram, quadro pro 4000 and an APPLE SSD TS512B
solid state
and i spent 10 gran on this system. I am a professional and this is my BUSINESS... my only income. not a kid playing games.
The video card was over a 1000.00! Nvidia? ADOBE?
This needs to be fixed. this is my livelihood

Thanks for responding....of course I mean adobe. A community forum is NOT a company.
I read the link to the thread and this person says an application CANNOT cause kernel panics -- well Apple begs to differ. http://support.apple.com/kb/PH14063
I have my own photography studio, ive spent over a half million dollars on my education (2 masters degrees) my equipment, and traveling the world to various workshops. I spend some evening researching new technology to stay on top of my craft but what I dont do and dont have time to do is follow forums regularly.
Therefore i dont know that this person has repeatedly said the same thing over and over in different threads about applications causing KP.
You suggested that I take my trouble shooting somewhere else...trust me this is not the first place ive tried to get answer.s I have been trying to resolve this issue since i updated to 10.9.4 and CC 14 and Nvidia Quadro pro 4000. It has been months of phone calls research, forums, talking to anyone i know that knows anything and I have lost thousands of dollars. My digital lab ran perfect before the updates.
so......
First...I DISAGREE with the guy in the thread because what he wrote is just his opinion. It doesnt matter wjho he works for, it a person converses a fact with NO REFERENCES then it looses credibility. I always include a reference when I make a statement to anyone
second: as i said in my discussion -- i have done everything and the only time i get kernel panics is when using photoshop - nothing else running in the background, and the issue is with the video card drivers , 10.9.4 and photoshop and lightroom CC14.
lastly; I know my video card is fine because Ive had photoshoots where i tethered (as I alwasy do) to Phocus software for my Hasselblad H4d and there is never a crash or kernel panic issue. ever.
I ONLY GET KERNEL PANICS WHEN I USE ADOBE PHOTOSHOP OR LIGHTROOM CC14 AND IT HAS ONLY HAPPENED SINCE I UPDATED TO 10.9.4 AND CC14
apple told me to do a restore -- they were just reading me what they were supposed to say.

I need to connect my LED cinema display to nvidia quadro 4000 graphics card

I cant find any adapter to connect my "LED cinema display" to the brand new graphics card "nvidia quadro 4000 (for Mac pro)"
As i coldnt find any information since now, ihope someone can give me a hint.

They included the wrong DisplayPort to Mini DisplayPort adapter. The correct adapter should have a female Mini DisplayPort connector, not male. You could buy the correct adapter or you could add a F-F Mini DisplayPort coupler
<http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042804 &p_id=6502&seq=1&format=2>
Try calling the, and asking for the correct adapter. They fo say:
"Connect to mini-DisplayPort displays through the included adapter cable"
<http://store.apple.com/us/product/H3314LL/A/nvidia-quadro-4000-for-mac>

NVidia Quadro 4500 for mac and pc question

I am thinking of purchasing a new Mac Pro 3.0GHz Quad-Core desktop with the nVidia Quadro 4500 graphics card. I want to run Solidworks on Windows XP SP2 and also be able to boot into Mac OS X. I have done hours of research trying to make sure it will work but can't seem to find any posts that suggest my system will work as I intend.
I have found out that the nVidia Quadro 4500 needs to configured for the mac (firmware) and that you just can't buy one from eBay and install it. There are PC versions and Mac versions. Also, flashing it to work with a mac is very difficult and may damage the card if you get it wrong. Not something I want to do.
So, my question is: If I buy this Mac Pro from Apple with the nVidia Quadro 4500 card already installed, will I have any problems with it working on the window side of things when I boot into Windows XP? Does anyone have the setup that I am talking about and also running SolidWorks on the Windows side?
Thanks in advance for any help you can give me.
Yee Ha!

Hi,
Mac OS X Leopard has Boot Camp included with the software. I have read online (Apple site amongst others) the BootCamp bundled with Leopard has all the drivers for Windows included, so you no longer need to create a disc with the drivers needed for Windows (as you did under the BootCamp beta version).
That being the case, Leopard should have the required drivers for your Quadro FX 4500 to function under Windows.
See here for details:
http://www.apple.com/uk/macosx/features/bootcamp.html
Hope this helps

Can I install nvidia quadro 600/ AMD FirePro V4900 (ATI FireGL) on HPE h8-1220t ?

HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo

masterqueue wrote:
HP/Nvidia Quadro 600 graphics card hangs w/ blue hp startp screen after installation into HPE h8-1220t.
Error: After installation and startup, just it sounds a 'beep' and after a minute, it beeps again. No further progess w/ HP blue screen.
Notes: Card spec
nVIdia Quadro 600 by pny
Frame Buffer Memory 1 GB DDR3 Memory Interface 128-bit Memory Bandwidth 25.6 GB/s CUDA parallel processing cores 96 Max Power Consumption 40 W Energy Star Compliant Yes Physical Dimensions 2.713" H x 6.60" L Single Slot Low Profile Form Factor Yes Display Connectors DVI-I (1), DP (1) Number of Displays Supported 2 DisplayPort Yes DVI Yes VGA Yes Graphics Bus PCI Express 2.0 x16 Thermal Solution Active 3D Vision Pro Support Via USB Warranty 3 Year Warranty PNY Part # VCQ600-PB
I contacted both HP and PNY customer support. They've not found any solution yet.
Only the suggestion I heard from HP customer support is change the graphic card w/ PCIe 3.0 support.
I believe PCI slot should be backward compatible w/ 2.0 version.
Does it really matter install PCIe2.0 graphic board on 3.0 slot?
My ohter option is AMD FirePRo V4900, which is one of the certified graphic card for the Autodesk.
However, I'm not sure wether it works with this machine.
Please give me an answer.
Kyoo
Hello masterqueue.
This desktop was a CTO (Configured-to-Order) model. As such, there is a lot of information I do not know about the machine. Most importantly, how large is the power supply? According to the computer's specification page it could have anywhere from a 300 watt to a 600 watt power supply. That is a very big difference.
I'll keep an eye out for your response. Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Update of photoshop CC - trouble with NVIDIA Quadro 1000M display driver. PS freezes

Hey guys,
Since today I've got trouble with my PS CC.
I've updated PS CC yesterday 2014-12-12.
I was doing some drawings today and two times PS freezes during switching layers of or selecting a mask.
A message appeared that there was trouble with the display driver an PS switched off the GPU support because of that issue.
Ok, I thought let's update the display driver and so I've done today. I switched to actual NVIDIA display driver version 314.21
I'm working with an NVIDIA Quadro 1000M on a DELL mobile Workstation Precision M4600 with 8 GB RAM.
Now when I start up PS and press alt+k, my 2 displays showing a black screen for 1-2 seconds.
After closing the general setup window again black screen for 1-2 sec and the top menu bar is showing no entries.
When I move the mouse pointer over the bar, the menus appear again. But the bar is like transparent at the parts where no menues are.
When I unlock the window from the screen an put it back fitting to the screen everything looks like normal.
Till today I hadn't any problem with my notebook in that kind of way.
Maybe someone has or had similar problems.
Would be nice if someone can help me.
thanks

Oh, that sounds very bad. It's not that bad for me. It's not crashing that often at the moment, only black screens at start up or if setting dialog is opened. But I will see tomorrow how often it will crash, during today it crashed 2 times when doing some ridiculous simple actions like switchid to another layer and the other time when trying to edit an mask layer. I will contact the support chat on monday regarding this issue. Maybe there is a solution or an update soon... I keep may fingers crossed for you.

NVIDIA Quadro FX 5800

Similar Messages

Maybe you are looking for