Nvidia Quadro fx2800m on w701ds with Win 7 64 update problem

Hello, i had a couple of crashes with blue screen and i knew it was the graphic driver because several times i saw the windows warning Graphic driver restored.
I decided to update it from the lenovo site by downloading the latest one, it was 307.xx and on installation it gave the error: This Graphics Driver could not find compatible graphics driver.
I downloaded the driver from the official nvidia website but it kept crashin after long time running, so i went to lenovo support and downloaded the latest one: 6md647ww.exe released on April 1st with driver version 311 and it gives the same error. I had a lot of troubles with this, installed lenovo system update but it doesn't help too, so npow i removed everything with device manager disable and uninstall, and automatically using windows driver update i have some version from 2011, no nvidia control panel and the other features.
Please let me know how can i install the official up to date lenovo driver, i even tried disabling the driver integrity check but it failed again.

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Similar Messages

Fine tuning nvidia quadro k4000 to work with premiere pro cc

Would anyone know the correct settings for nvidia quadro k4000 to work with premiere pro cc please?
Currently it's only using 33% of it's full power when rendering, while the CPU is running @ 95%
Mercury playback engine GPU is selected.
Thank you in advance

why would the encoder have the option to choose between mercury playback engine using GPU, or sofware encoding only!
From the article linked to earlier:
The video card and hardware MPE is not the holy grail. It helps in some circumstances to improve performance and rather significantly, but in other instances it does not help at all, as is indicated in the link above. People often think that installing a super fast video card will reduce export times by a significant amount of time. That is not true. It only helps in a limited number of situations. Keep in mind that:
Encoding to an export format is done by the CPU, not the GPU. No performance gain from a video card.
Frame rate changes, frame blending is done by a suitable video card, for instance exporting to 24P from 29.97i or 60P. Here there is a clear performance gain.
Scaling is also helped by hardware MPE, for instance going from 4K to HD or from HD to SD. Again a clear performance gain.
Rendering for preview is helped by the video card only for accelerated effects.

What's going on with the update problem?

I still can't attach my ipod to my machine and play any music. Additionally, if I try to update any data on the iPod (song titles, artist names, etc), this also ultimately ends up freezing my machine (spinning beachball). I've got the most recent update here, and I believe this to be the cause of the problem. I am also totally updated on my OS. 2nd Generation iPod, plenty of songs -- works fine other than the lousy battery situation (didn't have my receipt, so couldn't participate in the class action suit). Anyway, working straight from the ipod to headphones, everything works fine. I just can't add any new songs anymore.
What gives? Hasn't worked with the new updates. Apple, are you listening?

I have a 4G 40 gig iPod that would lock up my computer if I plugged it in (Win XP). It would skip songs, freeze, do all kinds of weird stuff accompanied by a clicking sound. If your iPod is doing this, most people I have read about (including myself) found that by hitting your iPod hard on the right side seems to fix the problem. Mine wasn't working for about two weeks, I finally gave up all the other things I was doing and tried it. Now it works fine again. I also thought it was the "1-10-2006" updater, but I think it was just something loose in the iPod.

Newbie here with automatic update problem.

Hi everyone,
I just purchased a palm centro for sprint and so far I really like it. The problem is every morning when I get up there is this message...
Sorry, your secheduled automatic updte did not complete successfully because a connection could not be establised--32485
Can anyone help me with this? I would appreciate any advice. Thanks.
Leila
Post relates to: Centro (Sprint)

Hello Leila and welcome to the Palm forums.
This is likely an error message from the My Centro application of the Palm Software (store) application. The problem is that one or both of these applications is waking up while you're asleep and trying to check for content updates (not really needed in my opinion) and the Internet connection on your phone is currently closed.
I don't use either of these applications on my Treo 755p (My Centro is called My Treo). If you launch these apps on your Centro, and then press the Menu button on your keyboard you should be be able to access the menu item that controls software updates and turn off the updates.
Other applications on your Centro may also be looking to check for updates. I would also check Pocket Tunes (pTunes) to see if it is looking for updates also.
Hope that helps,
Alan G
Post relates to: Treo 755p (Sprint)

Help with iPhoto update problems?

I was just prompted to update to iPhoto 2011 9.4.2 and not it will not upload albums to Facebook and it's decided to move all my events around and no longer allow me to move photos in an event. Does anyone have any solutions?

Hi Ed_Tubridy,
Please click on Learn More and let us know the exact error message. Are you on a managed network.
Regards,
Romit Sinha

JTable with ScrollPane update problem

hay i have a table and scrollpane is used as a container, at runtime i create new object of table and assign it to the scrollpane, but its still showing the old table,
I also tried to
updateUI();
repaint();
but it still showing the same old table,
I also debug and saw that the new table has been created n successfuly displaying the values at command prompt.
Can any one know whats wrong in it.

Dont be ferious budy, now this is a working example....
Problem is: I am changing the table object in jPanel2 but still jPanel2 is showing the same old table, I think there is a refresh kind of a problem
Be kool dude n tell where is the problem.
package tabletesting;
import java.awt.BorderLayout;
import javax.swing.JFrame;
import javax.swing.JPanel;
import java.awt.*;
import javax.swing.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.ContainerEvent;
import java.awt.event.ContainerAdapter;
public class EmbededTable extends JFrame {
public EmbededTable() {
try {
jbInit();
} catch (Exception exception) {
exception.printStackTrace();
private void jbInit() throws Exception {
flag=1; // flag to alter between objects
getContentPane().setLayout(null);
jPanel1.setBorder(BorderFactory.createEtchedBorder());
jPanel1.setBounds(new Rectangle(28, 11, 320, 76));
jPanel1.setBackground(Color.pink);
jPanel1.setVisible(true);
// jPanel1 contain the buttons when press toggel the table in panel
 this.setSize(new Dimension(640, 600));
this.addContainerListener(new EmbededTable_this_containerAdapter(this));
jPanel1.setLayout(null);
jButton1.setBounds(new Rectangle(57, 2, 71, 29));
jButton1.setText("jButton1");
jButton1.addActionListener(new EmbededTable_jButton1_actionAdapter(this));
jPanel2.setBorder(BorderFactory.createEtchedBorder());
jPanel2.setBounds(new Rectangle(22, 133, 578, 304));
jPanel2.addContainerListener(new EmbededTable_jPanel2_containerAdapter(this));
jPanel2.setLayout(borderLayout1);
testTable(); // to initially populate the jPanel2 with the tabel
jButton2.setBounds(new Rectangle(191, 20, 93, 25));
jButton2.setText("jButton2");
jButton2.addActionListener(new EmbededTable_jButton2_actionAdapter(this));
this.getContentPane().add(jPanel1);
jPanel1.add(jButton1, null);
jPanel1.add(jButton2);
this.getContentPane().validate();
this.setVisible(true);
this.show();
public void testTable()
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"Include Input",
"Include Output"};
Object[][] data = {
{"Mary", "Campione",
"Snowboarding", new Boolean(false), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Boolean(false), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Boolean(false), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Boolean(false), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Boolean(false), new Boolean(false)},
if(flag==1)
TableDemo newContentPane = new TableDemo(columnNames,data,4,5);
newContentPane.setOpaque(true); //content panes must be opaque
jPanel2.add(newContentPane, BorderLayout.CENTER);
jPanel2.updateUI();
jPanel2.repaint();
jPanel2.revalidate();
this.getContentPane().add(jPanel2);
flag=0;
else if(flag==0)
Object[][] daa = {
{"A", "T",
"B", new Boolean(false), new Boolean(false)},
{"C", "T",
"Rowing", new Boolean(false), new Boolean(true)},
{"D", "T",
"Knitting", new Boolean(false), new Boolean(false)},
{"E", "T",
"Speed reading", new Boolean(false), new Boolean(true)},
{"F", "T",
"Pool", new Boolean(false), new Boolean(false)},
TableDemo newContentPane = new TableDemo(columnNames,daa,4,5);
newContentPane.setOpaque(true); //content panes must be opaque
this.getContentPane().add(jPanel2);
this.jPanel2.add(newContentPane,BorderLayout.CENTER);
this.jPanel2.updateUI();
jPanel2.repaint();
jPanel2.revalidate();
this.getContentPane().add(jPanel2);
flag=1;
public static void main(String[] args) {
EmbededTable embededtable = new EmbededTable();
JPanel jPanel1 = new JPanel();
static int flag;
JButton jButton1 = new JButton();
JPanel jPanel2 = new JPanel();
JPanel jPanel3 = new JPanel();
BorderLayout borderLayout1 = new BorderLayout();
JButton jButton2 = new JButton();
public void CreateGUI()
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"Include Input",
"Include Output"};
Object[][] data = {
{"A", "Campione",
"B", new Boolean(false), new Boolean(false)},
{"C", "Huml",
"Rowing", new Boolean(false), new Boolean(true)},
{"D", "Walrath",
"Knitting", new Boolean(false), new Boolean(false)},
{"E", "Zakhour",
"Speed reading", new Boolean(false), new Boolean(true)},
{"F", "Milne",
"Pool", new Boolean(false), new Boolean(false)},
//Create and set up the content pane.
TableDemo newContentPane = new TableDemo(columnNames,data,4,5);
newContentPane.setOpaque(true); //content panes must be opaque
jPanel3.setBorder(BorderFactory.createEtchedBorder());
jPanel3.setBounds(new Rectangle(22, 133, 578, 304));
jPanel3.setLayout(borderLayout1);
// this.getContentPane().remove(jPanel2);
this.getContentPane().add(jPanel3);
this.jPanel3.add(newContentPane,BorderLayout.CENTER);
this.jPanel3.updateUI();
this.validate();
public void jButton1_actionPerformed(ActionEvent e) {
CreateGUI();
public void jButton2_actionPerformed(ActionEvent e) {
testTable();
public void this_componentAdded(ContainerEvent e) {
public void jPanel2_componentRemoved(ContainerEvent e) {
System.out.println(" component removed");
public void jPanel2_componentAdded(ContainerEvent e) {
System.out.println(" component added");
class EmbededTable_jPanel2_containerAdapter extends ContainerAdapter {
private EmbededTable adaptee;
EmbededTable_jPanel2_containerAdapter(EmbededTable adaptee) {
this.adaptee = adaptee;
public void componentRemoved(ContainerEvent e) {
adaptee.jPanel2_componentRemoved(e);
public void componentAdded(ContainerEvent e) {
adaptee.jPanel2_componentAdded(e);
class EmbededTable_this_containerAdapter extends ContainerAdapter {
private EmbededTable adaptee;
EmbededTable_this_containerAdapter(EmbededTable adaptee) {
this.adaptee = adaptee;
public void componentAdded(ContainerEvent e) {
adaptee.this_componentAdded(e);
class EmbededTable_jButton2_actionAdapter implements ActionListener {
private EmbededTable adaptee;
EmbededTable_jButton2_actionAdapter(EmbededTable adaptee) {
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
adaptee.jButton2_actionPerformed(e);
class EmbededTable_jButton1_actionAdapter implements ActionListener {
private EmbededTable adaptee;
EmbededTable_jButton1_actionAdapter(EmbededTable adaptee) {
this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
adaptee.jButton1_actionPerformed(e);
TabelDemo class
public class TableDemo extends JPanel {
private boolean DEBUG = false;
public TableDemo(String[] c, Object[][] d,int col,int row) {
super(new GridLayout(1, 0));
JTable table = new JTable(new MyTableModel(c,d,4,5));
table.setPreferredScrollableViewportSize(new Dimension(500, 70));
table.setFillsViewportHeight(true);
Object obj=table.getValueAt(0,1);
table.updateUI();
JScrollPane scrollPane = new JScrollPane();
scrollPane.getViewport().setView(table);
 Object ob= table.getValueAt(0,0);
System.out.println(" ob " + ob.toString());
scrollPane.updateUI();
scrollPane.getViewport().revalidate();
scrollPane.getViewport().updateUI();
add(scrollPane);
this.updateUI();
this.revalidate();
super.repaint();
super.validate();
Tabel class
public class MyTableModel extends AbstractTableModel {
boolean DEBUG= false;
public String[] columnNames ;
public String[] str; // to verify only one output variable
Boolean fal= new Boolean(false);
 public Object[][] data;
MyTableModel()
MyTableModel(String[] col, Object[][] dat, int lenRow, int lenCol)
data=dat;
columnNames=col;
str= new String[col.length];
funcopy(str,lenRow);
void funcopy(String[] str, int lenRow)
for(int i=0;i<lenRow;i++)
str=fal.toString();
for(int i=0;i<str.length;i++)
System.out.println("values are " + str[i]);
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.length;
public String getColumnName(int col) {
return columnNames[col];
public Object getValueAt(int row, int col) {
return data[row][col];
public Class getColumnClass(int c) {
return getValueAt(0, c).getClass();
public boolean isCellEditable(int row, int col) {
//Note that the data/cell address is constant,
//no matter where the cell appears onscreen.
if (col < 2) {
return false;
} else {
return true;
public void setValueAt(Object value, int row, int col) {
if (DEBUG) {
System.out.println("Setting value at " + row + "," + col
+ " to " + value
+ " (an instance of "
+ value.getClass() + ")");
System.out.println("row " + row + "col " + col + value.toString());
Object obj= getValueAt(row,col);
if(col==3) // column 3 is the output column.
if(value.toString().equals("true"))
int savepointer=row;
int flag=-1;
for(int i=0;i<str.length;i++)
if(str[i].toString().equalsIgnoreCase("true"))
flag=1;
if(flag!=1)
System.out.println("inside flag ==1");
data[row][col]=value;
str[row]=value.toString();
fireTableCellUpdated(row, col);
if(value.toString().equals("false"))
data[row][col]=value;
str[row]=value.toString();
fireTableCellUpdated(row, col);
}// id col ends...
if (DEBUG) {
System.out.println("New value of data:");
printDebugData();
private void printDebugData() {
int numRows = getRowCount();
int numCols = getColumnCount();
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + data[i][j]);
System.out.println();
System.out.println("--------------------------");

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

Nvidia/nvidia-utils 190.42-1 with xorg-server 1.7.1-1 segfault

After today's upgrade, X fails to start with segmentation fault. When I downgraded nvidia/nvidia-utils to 185.18.36-2, xorg-server to 1.6.3.901-1 and related xf86-input-*, it starts to work. Interestingly, neither combination of nvidia/nvidia-utils to 185.18.36-2 with xorg-server 1.7.1-1, nor nvidia/nvidia-utils 190.42-1 with xorg-server to 1.6.3.901-1 works. After downgrading and playing it a little bit, I lost my original crash logs.
I guess I should post the problem here to see if anyone is seeing the same problem, before going back upgrading and hitting the bug again. Of course, if you are interested in my Xorg.0.log, I can produce it again.
And by the way, I'm using arch64 on a lenovo t61p with nVidia Quadro FX 570M. I guess the problem is new, and I don't have any luck with google, yet.

I just encountered this error with nvidia-173xx, I guess the only solution is to manually search for and install the
older xorg packages? And wait for nvidia to possibly* add support for the new xorg?
X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686
Current Operating System: Linux Thorin 2.6.31-ARCH #1 SMP PREEMPT Fri Oct 23 11:12:58 CEST 2009 i686
Kernel command line: root=/dev/disk/by-uuid/3902f419-5299-4a4e-8cc7-f31d3d7702a5 ro vga=773
Build Date: 25 October 2009 08:20:56PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 1 13:59:11 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e5f40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 8
(--) PCI:*(0:1:0:0) 10de:00c8:1558:0900 nVidia Corporation NV41.8 [GeForce Go 6800] rev 162, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, 0xb1000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.20 Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
dlopen: /usr/lib/xorg/modules/drivers/nvidia_drv.so: undefined symbol: resVgaShared
(EE) Failed to load /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) UnloadModule: "nvidia"
(EE) Failed to load module "nvidia" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Edit: found my packages at http://www.schlunix.org/archlinux/extra/os/i686/ and did a downgrade,
anubis@Thorin ~/ $ sudo pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-input-synaptics-1.1.3-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-nv-2.1.14-1-i686.pkg.tar.gz /var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz
Last edited by 1LordAnubis (2009-11-01 23:07:34)

Raid0 or SSD for i7-2720QM 2.2 GHz + nVidia Quadro 3000M 2Gb (Premiere)?

Dear All,
while reading on different mobile (notebooks) options for editing I came across
that discussion where it was said
"This prevents one to use a nVidia MPE capable video card AND a raid controller".
I'm not so much into hardware, i'm comfotable building myself PC towers (and I recently built one for editing),
and now I just need some mobile solution and looking for a notebook to edit AVCHD.
One can configure Dell m6600 to have a raid0 (500 Gb 7200) and a nVidia Quadro 3000m (2Gb GDDR5) with an
i7 2720QM 2.2GHz processor.
And now I'm a bit puzzled with that quote. Will I really benifit from that raid0+Quadro in Premiere 5.5 MPE?
Or it's better to go for SSD and some external raid0 via eSata/USB3.0?
I hope Mr Harm Millaard will comment on that.
Thank you in advance,
Kind regards,
Denis.

Look at Rustes notebook, which is a Dell with an i7-2720QM and a GTX-555M at rank #166 with a 500 GB 7200 RPM and a SSD disk and 16 GB memory. Quite a nice performer for such a system. But knowing Dell, you probably have to pay quite a lot to 'upgrade' to a Quadro card without any noticeable performance to show for it. Look here: http://ppbm5.com/DB-PPBM5-2.php

NVIDIA Quadro FX 5600

Is the NVIDIA Quadro FX 5600 compatible with a power mac quad G5?. I need to buy a new graphic card and I wanted the best, money is no matter. If it's not, I would like a recommendation for a godd graphic card compatible with my computer
I also have a Power Mac Dual G5 2.7 and I would like to ask for a good graphic card too since it's AGP and they are harder to find. Thanks

Hi-
Welcome to Discussions!
The top upgrade options are as follow:
The Quad G5 can use the Quadro FX 4500, or the X1900 G5 Edition.
Benchmarks
The 2.7 G5 can use the 6800 GT, 6800 Ultra, or the X800XT.
Benchmarks

Updating problem...I have a update that starts out going through but then does not finish just keep running

also with the update problem it says software update and below the running bar it says connecting to the server

Please do the following: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

Update of photoshop CC - trouble with NVIDIA Quadro 1000M display driver. PS freezes

Hey guys,
Since today I've got trouble with my PS CC.
I've updated PS CC yesterday 2014-12-12.
I was doing some drawings today and two times PS freezes during switching layers of or selecting a mask.
A message appeared that there was trouble with the display driver an PS switched off the GPU support because of that issue.
Ok, I thought let's update the display driver and so I've done today. I switched to actual NVIDIA display driver version 314.21
I'm working with an NVIDIA Quadro 1000M on a DELL mobile Workstation Precision M4600 with 8 GB RAM.
Now when I start up PS and press alt+k, my 2 displays showing a black screen for 1-2 seconds.
After closing the general setup window again black screen for 1-2 sec and the top menu bar is showing no entries.
When I move the mouse pointer over the bar, the menus appear again. But the bar is like transparent at the parts where no menues are.
When I unlock the window from the screen an put it back fitting to the screen everything looks like normal.
Till today I hadn't any problem with my notebook in that kind of way.
Maybe someone has or had similar problems.
Would be nice if someone can help me.
thanks

Oh, that sounds very bad. It's not that bad for me. It's not crashing that often at the moment, only black screens at start up or if setting dialog is opened. But I will see tomorrow how often it will crash, during today it crashed 2 times when doing some ridiculous simple actions like switchid to another layer and the other time when trying to edit an mask layer. I will contact the support chat on monday regarding this issue. Maybe there is a solution or an update soon... I keep may fingers crossed for you.

Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

Hello,
I'm trying to help out a buddy of mine with his cinema monitor.
He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
What am I missing?
Thanks!

November 2007 Mac Pro with NVIDIA Quadro 5600 Win only

Hi,
so I have a NVIDIA quadro 5600 graphics card (PNY model) from another machine and want to use it with my late 2007 Mac Pro since my ATI XT1900 is slowly dying, has some temperature issues.
I am only gonna use this machine for Windows and I am aware that the card won't work in MAC OS but I thought it should work just fine otherwise.
So I installed the card and connected a second PCI Express 6 pin power cable (in addition to the one that was there from my ATI card) from the mainboard (so from the unoccupied 6-pin connector next to the other one) to the card.
When I was switching on the machine, a buzzer sounds and apparently it means not enough power:
http://www3.pny.com/QuadroPDFs/5600PowerRequirements.pdf
so I thought there is something wrong with the mainboard 6-pin power connectors and used a molex y-adapter to directly connect the card to the power supply but with the same effect.
Next thing I tried to connect an external 200W power supply directly to the card, guessing that the MAC's power supply won't be enough (which it should...think 900W?) but still getting the buzzer sound.
Anyone tried this setup before or has some hints to how to resolve this issue?
If not, I guess I have to sell the card and look for an alternative - which card would be compatible for Windows use in my MAC Pro?
thank you all in advance,
Johannes Kohnle

I would concur, XP/Vista firmware reads two versions and most PC graphic cards have two versions embedded.
So hopefully with Mac's technical experience they should be able to do what Microsoft have been doing for years.
This is a well covered subject, we are all expecting something soon. Mr jobs told us so.
The reality is I guess, do Apple want to do it?
History dictates that they are not exactly ones for making Mac's upgradeable.
I too and I expect many others will seriously consider whether to upgrading again if the 8800GT for the Mac Pro 2006 /7 never materialises, mind you we could always place a pillow on it and use it as a seat.

T61 will not boot with nvidia quadro 140m driver

Hi all,
A couple of weeks ago, after allowing MS update to install some FTDI driver updates, my system will not boot up and hangs shortly after the initial vista loading screen. The screen goes black with some HD activity and eventually reboots. After trying a couple of restore points with no luck, I started to remove the latest driver updates and other software to my system again with no luck.
If I uninstall the nvidia driver and use the Standard VGA driver, it will boot and come up properly. I've done a bunch of web searches and searches on this site and can't find my exact circumstances. Its hard to believe that it could be a hardware issue since it started after a software update, but since it hasn't been a problem for anyone else, I'm just not sure at this point.
I've tried earlier versions of the nvidia driver, removing other drivers and services trying to find a coincidence, but nothing seems to work. I'm kind of at a loss at this point. Does anyone have some suggestions?
Thanks in advance,
Dave

More info on my system:
OS Name    Microsoft® Windows Vista™ Business
Version    6.0.6001 Service Pack 1 Build 6001
System Model    6459CTO
System Type    x64-based PC
Processor    Intel(R) Core(TM)2 Duo CPU     T8300 @ 2.40GHz, 2401 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date    LENOVO 7LETC5WW (2.25 ), 11/14/2008
SMBIOS Version    2.4
Installed Physical Memory (RAM)    4.00 GB
Also, does anyone know if using the Standard VGA Display driver without problems on this system means that the video card hardware is working? In other words, I'm trying to rule out a hardware problem with my nvidia quadro 140m card, so if the system works fine with the standard vga driver, would that mean the hardware on the card is ok?
Thanks,
Dave

Nvidia Quadro fx2800m on w701ds with Win 7 64 update problem

Similar Messages

Maybe you are looking for