Nvidia Quadro NVS 110M (Dell Latitude D620) driver issue

I'm having trouble installing the right driver for Nvidia QUadro NVS 110M video card on my laptop. What ever driver I install it requests for a reboot and when I restart, I get a blue screen.
Things that I have tried (all resulted in blue screen after restart).
Update driver using Automatic update
Downloaded driver from Dell support site (for Vista)
Downloaded driver from nVidia
Downloaded beta driver from nVidia
Please note: It used to work on Windows 7 before on the same laptop - I was trying to replace HDD and cant seem to make it work again with the new OS installation.Chandra Sekhar

Hello,
I'd suggest you installing the XP driver in Compatibility mode. Remove that hardware device in Device Manager, right-click on the driver executable/installer file and select the Compatibility tab; click the checkbox before Run this program in Compatibility mode for option and select Windows XP in the list-down box;
If the problem still persists, please understand that Windows 7 is a new operating system (only the beta version) and whole driverstore has been reprogrammed; some old driver is not compatible with new OS. I suggest that you should wait for another period of time till the retail version is released and push the vendor company to upgrade their device driver. Thanks for your time and understanding!
For more details, please look at the first Sticky thread at the top of this forum.
What can I do if my hardware does not work?
This will give you some guidelines.
Good Luck!

Similar Messages

Which display driver package do I need for Nvidia Quadro NVS 110m?

Hi there,
I'm new to (Arch) Linux and was wondering which display driver package I need. I have a Dell Latitude D620 with a "nvidia quadro nvs 110m".
In the Arch Linux beginners guide it says:
1. nvidia-96xx slightly newer cards up to the GF 4.
2. nvidia-173xx Geforce FX series cards
3. nvidia newest GPUs after the GF FX
Consult the NVIDIA-Homepage to see which one is for you.
But on the NVIDIA-Homepage it says:
The GeForce M series and GeForce Go series notebook GPUs use drivers that have been customized by the notebook manufacturers to support hot key functions, power management functions, lid close and suspend/resume behavior. NVIDIA has worked with some notebook manufacturers to provide notebook-specific driver updates, however, most notebook driver updates must come from the notebook manufacturer.
And they just forward me to Dell Support which obviously neither offers a linux driver nor linux driver information for the D620.
So which of the three packages do I have to install?
Are these packages open-source drivers? Do I need proprietary nvidia drivers to get full 3D-performance?
Does anybody have experience with the D620?
Although I'm new to Linux and I like the KISS idea behind Arch Linux, I still want to have all that Compiz Fusion eye candy. I also want to play a few games which need 3D performance (once I'm familiar with wine). ;-)
Thanks in advance for your help,
Blackhole
Last edited by blackhole (2008-12-14 10:22:05)

Thanks a lot.
Final question: How does Arch Linux deal with license issues? If the nvidia package includes the original nvidia drivers linked above, doesn't that cause any legal/moral problems? Like in Ubuntu for example they always point out that it's proprietary software you're gonna install when enabling the nvidia drivers.
Just wondering...

Tecra M5 Nvidia Quatro NVS 110M Windows 7 32bit driver

I upgraded to Windows 7 operating system without any issues until a few moths down the track my graphics driver corrupted and I have tried to reinstall it several times. I downloaded the driver from the Nvidia site ver 179.48 for Win 7 but I just keep getting a code 43 error and the display defaults to 800x600 16 colors. When I click to update the driver it does so sucessfully but when it reboots it defaults back to the setting above. I have also uninstalled and reinstalled the driver but same issue arises.
I have reinstalled Windows 7 (I have Ultimate N) 32 bit operating system but noo good it defaults back to the problem with the driver. Can anyone help me with a more appropriate version of the driver to install please. I tried to look for it on the Toshiba site but could not find one.

>I upgraded to Windows 7 operating system without any issues until a few moths down the track my graphics driver corrupted and I have tried to reinstall it several times. I downloaded the driver from the Nvidia site ver 179.48 for Win 7 but I just keep getting a code 43 error and the display defaults to 800x600 16 colors
Usually the display resolution should be higher even if the display driver was not installed.
The point is that Win 7 provides an standard Microsoft driver and this driver should run properly and the display resolution should work too.
Do you have any display problems using the Toshiba standard image?
Check this because I think that a graphic card issue might be possible

Driver please! NVidia Quadro NVS 140M Windows 7 64-bit

Installed Windows 7 RTM (Professional, x64) on my T61. Surprise! There's no driver for my NVidia Quadro NVS 140M, and I can't install the one that I downloaded from NVidia. I'm stuck in 1024x768. Ouch!
What's the plan, Stan?
If there are any driver hackers out there who could help me install NVidia's driver, please speak up.

I'm running now using the NVidia-provided driver for Windows 7 x64. I was able to install it by running the installer in Vista compatibility mode.
For Windows 7 newbies, the specific steps are:
* Download the installer (186.81_notebook_win7_winvista_64bit_international_whql.exe)
* Run this file to extract the files to C:\DRIVERS\WIN\VIDEO
* For the two files nvudisp.exe and setup.exe in C:\DRIVERS\WIN\VIDEO, do the following:
* Right-click the file, select Properties.
* Click the Compatibility tab
* Check the box for "Run this program in compatibility mode for:" Select "Windows Vista (Service Pack 2)
* Click OK.
Then double-click setup.exe to run it.
So far this is working for me.

NVIDIA Quadro NVS 140M display driver updates?

I was wondering, when will the updates for NVIDIA Quadro NVS 140M driver be release? I tried playing some games and they say that my display driver is not uptodateand they do not allow me to play it =(
[code]
link : http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67890
Display (NVIDIA Quadro NVS 140M / Quadro FX 570M) driver for Windows Vista 32-bit - ThinkPad
This package installs the software (display driver) to enable the following video chips on the system board.
- NVIDIA Quadro NVS 140M
- NVIDIA Quadro FX 570M
Supported operating systems:
- Microsoft Windows Vista 32-bit
Supported systems:
- ThinkPad R61 (Machine types: 7742, 7743, 7744, 7751, 7753, 7754, 7755, 8914, 8918, 8919, 8920, 8927, 8928, 8929)
- ThinkPad R61i (Machine types: 7742, 8918)
- ThinkPad T61, T61p
Version: 7.15.11.7597 Release Date: 2008/06/16
Version 7.15.11.7597
(New) Support for Vista SP1.[/code]

Bump...
Non - replied me

How do I install the builtin graphics drivers for my Dell Latitude D620 in Windows 8.1?

Hi, I would like to be guided through the correct driver installation for the in-built integrated graphics driver for my "Dell Latitude D620" Laptop PC which is running Windows 8.1 Pro (32-bit). By default, Windows 8.1 includes ans installs the
"Microsoft Basic Display Adapter driver" to maintain compatibility with the OS. I would like to install the original and genuine graphics driver supplied by Dell Inc. (not by Microsoft) on Win 8.1, how can I achieve this? please
help.

Yes, Dell will have better answer for this issue
Since this PC quite old, I suggest contact Dell
Based on product spec, your Laptop maybe using 256MB NVIDIA® Quadro NVS 110M TurboCache or
Intel® Graphics Media Accelerator 950 (Up to 224MB shared5)
http://www.dell.com/us/dfb/p/latitude-d620/pd
there is no driver for Windows 8.1 32 bit
http://www.dell.com/support/drivers/us/en/19/Product/latitude-d620
This is Windows 8.1 system requirement, I suggest discuss with Dell
http://windows.microsoft.com/en-us/windows-8/system-requirements

Airport Extreme update to 7.6.3 orphans my Dell Latitude D620

Anyone else experiencing this?
I dutifully upgraded my Airport Extreme to 7.6.3 from 7.6.1 as instructed by my computer.
This is the latest version of the Airport Extreme - simultaneous dual band, etc. Purchased a few weeks ago.
My Dell Latitude D620 will no longer connect properly to the network. The "DW WLAN Card Utility" shows that it is sending packets, but not receiving them. The signal strength is strong, as expected and normal.
I've ensured that all updates on the Dell are installed. The hardware is a "Dell Wireless 1390 WLAN Mini-Card", original and internal to the unit. The driver is 5.60.18.9
All other devices (laptops, iphones, Apple TV, etc. - including a more 'modern' Dell laptop) are working fine both before and after the update to 7.6.3.
This worked perfectly prior to the update to 7.6.3. So with considerable trouble, I reverted to 7.6.1, and the laptop could connect again. Upgrading a second time to 7.6.3 and the problem reappears.
If anyone has any ideas on this before I junk my trusty old Dell laptop, please let me know!

Did anyone ever found a solution to this?
I upgraded Airport Extreme to 7.6.4 and the Dell D620 is having problem connecting. Sometime it connects but no Internet access. I have 2 other none Dell laptops and Iphone 4. They all work with the Airport router. Just the Dell that having an issue.
Is reverting back to 7.6.1 the only solution?

Troubleshooting a freeze: HP DC7800, NVIDIA Quadro NVS 290, Windows 7

Hello everyone,
I'm having problems with my HP DC7800 & Windows 7 (fresh install, 64 bit). The video card is NVIDIA Quadro NVS 290.
When any official NVIDIA driver is installed, I can boot into Windows 7, but just a few seconds into reaching the log in screen, there is a brief flicker & everything freezes. Though sometimes, the keyboard does respond: the CapsLock & the NumLock lights on my keyboard respond after a delay of, 5 seconds to 2 minutes.
When rolling back to whatever the default Windows drivers are available before installing the official drivers (WDDM v1.1?), I can't even get to the Windows log-in screen. The monitor displays "No Signal" and it's all blacked out. I have to shut it down with the physical power button.
When going back even further to the Standard VGA Graphics Adapter, I can boot into normal mode. Though using the same driver as the one in safe-mode is far from what I'm after.
Also, I should mention that I'm on a multi-boot system with Linux. They are on a separate drive and they can boot with comparitively-minimal problems.
Debian 7.7 with the open-source nouveau drivers work perfectly well.
Ubuntu-Gnome 14.04.1 with nouveau works well. With enough arm-twisting & the right combo of packages, I can get Ubuntu to work with the latest, official proprietary NVIDIA drivers.
Because I can get the NVIDIA card to work in 2 Linux distros, I'm fairly certain that the card is NOT completely broken.
It is the fresh-install of Windows 7 that is giving me trouble.
I've upgraded my BIOS to the latest available: 786F1 v01.32, 7/21/2011.
After updating BIOS, I've tried uninstalling & reinstalling several official drivers (309.00, 331.82, 333.11 & the latest: 341.05) with similar results.
For what it's worth, there is also an HP announcement. Should I update my Video BIOS, as the announcement says? How would I do that?
Other possibly important or irrelevant info:
* when the NVIDIA card is not in the computer, I connect using the motherboard's VGA slot & I can boot into Windows 7 normal mode perfectly well.
* when the NVIDIA card is in the computer, I can only boot into Windows safe mode. Booting Windows 7 into normal mode will freeze the computer a few seconds afterlogging in or reaching the login screen.
* At an earlier point in my troubleshooting, I was getting a BSOD screen, which mentioned the nvlddmkm.sys file.
* I've looked at my error logs, and they mostly report Event ID 7001 (Service Control Manager) and Event ID 10005 (Distributed DCOM)
Main questions:
Is there something about updating my Video BIOS, as per the link above, that would help? Or is that video BIOS update included in the whole-system BIOS update to v01.32?
If I can get my computer to work in Windows 7 safe mode, Debian Linux (with open source driver) & Ubuntu (with open source & official proprietary drivers), why can't I get Windows 7 to work in normal mode?
Are there any display-specific error logs that could clue me in? The only error log I know about is the one available through Administrative Tools > Event Viewer.
Are there any alternative, reputable drivers available for the Quadro NVS 290 on Windows 7?
Thank you for your time and please let me know if you need any more info or if there's something else I can do.

When installing that HP Nvidia driver you linked, and even switching to DVI port #1. I got the same results:
boot into Windows normal mode, get to the log-in screen. There's a flicker on the screen & everything freezes.
Hmm, well I went ahead and tried using an official NVIDIA driver in my Ubuntu setup (14.04.1). The packages I installed for Ubuntu were 'nvidia-331-updates' and 'nvidia-331-updates-uvm'.
It works well, as long as I go into my NVIDIA X Server Settings > GPU 0 > PowerMizer > Preferred Mode > Prefer Maximum Performance.
I have to do this immediately after logging in, otherwise Ubuntu will freeze after about a minute.
I can do some moderate gaming, Team Fortress 2, resolution set to 1280x720, after about 15 minutes I log out and see that my GPU temp is 77 Celsius.
With the same configuration, at rest, the GPU is 64-66 Celsius.
Maybe my card is toasted? From my limited understanding of drivers, the official, proprietary driver will enable the more advanced features of the card. This only seems to be a problem when I use the NVIDIA drivers...But please correct me if I'm wrong.
Moderate gaming with open source nouveau drivers on Ubuntu doesn't perform well, but it doesn't crash either.
Anyway, I think I'll go ahead and order another card.
In the meantime, is there a way to configure the NVIDIA card from the command line for Windows normal mode? I'm trying to think of a way to work with it before the Windows GUI is loaded.

NVIDIA Quadro NVS 160M/150M GPU on T500?

Hi
does anyone know if NVIDIA Quadro NVS 160M or 150M workson T500 with Advanced Dock?
Thanks

Hello!
I'm using the same card as you:
lspci:
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS 160M] (rev a1)
I'm using the arch kernel: kernel26 + nvidia + nvidia-utils
My Xorg.conf:
65 Section "Device"
66
67 Identifier "Nvidia Quadro NVS 160M"
68 VendorName "Nvidia Corporation"
69 Boardname "Quadro NVS 160M"
70 Driver "nvidia"
71 Option "NoLogo" "true"
72 Option "DPI" "96 x 96"
73
Best regards,
Flasher

T61 (7662CTO) - NVidia Quadro NVS 140M

Hello
My laptop is T61 (7662CTO)
it hase a lotof hanging up when I use my computer .
so I reinstalled again Windows Vista (reset to Factory setup)
then I use "Lenovo system tools (pc doctor) for checking my hardware.
I saw some problem in my graphic card test .
see this result & please tel me what is that reason ..
should bringe my Laptop to warranty becuase I am not happy about it .
here is my test check :
Lenovo System Toolbox Log File
February-20-09 5:58:38 PM
NVIDIA Quadro NVS 140M
Manufacturer:     NVIDIA
Driver:     c:\windows\system32\drivers\nvlddmkm.sys
Driver Version:     7.15.11.7693, 11-14-2008
Local Video Memory Test
Test Started        20/02/2009 5:01:12 PM
Test Finished:     Passed    20/02/2009 5:01:37 PM
Non-Local Video Memory Test
Test Started        20/02/2009 5:01:37 PM
Test Finished:     Passed    20/02/2009 5:05:57 PM
Primary Surface Test
Test Started        20/02/2009 5:05:57 PM
Warning Message:     Error at pixel 0 0 : Input color 000F0F0F not equal to output color 00000000.    20/02/2009 5:06:02 PM
Test Finished:     Failed    20/02/2009 5:06:08 PM
Fixed Transformation and Lighting Test
Test Started        20/02/2009 5:06:08 PM
Test Finished:     Passed    20/02/2009 5:06:56 PM
Wireframe Line Test
Test Started        20/02/2009 5:06:56 PM
Test Finished:     Passed    20/02/2009 5:07:41 PM
GPU Pipeline Data Test
Test Started        20/02/2009 5:07:42 PM
Test Finished:     Passed    20/02/2009 5:08:42 PM
Shader Rendering Test
Test Started        20/02/2009 5:08:42 PM
Test Finished:     Failed    20/02/2009 5:08:47 PM
Wireframe Shader Rendering Test
Test Started        20/02/2009 5:08:47 PM
Test Finished:     Failed    20/02/2009 5:08:53 PM
Shader Rendering DX10 Test
Test Started        20/02/2009 5:08:53 PM
Test Finished:     Passed    20/02/2009 5:09:42 PM
PCI Express Status Test
Test Started        20/02/2009 5:09:42 PM
Test Finished:     Passed    20/02/2009 5:09:43 PM
Product Version: 5.1.5122.07

Hello,
I would suggest to give service a call. Tell them about your results.
If you are in warranty till now, it should be serviced.
Message Edited by Agotthelf on 21-02-2009 11:34 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

NVidia Quadro NVS 285 and 30" titanium cinema display

Does the nVidia Quadro NVS 285 (or 55/280 PCI) support the old 30" titanium cinema display? I'm running the display to an HP tower via DVI-D dual link adapted to a DVI dual link (DMS-59), and I can't get it to work. Can anyone help?

I wish I could offer some advice. Instead, I am seeking your thoughts on the new card. Did the X800XT work? I have the same machine as you and am looking to upgrade my 64mb geForce 5200 card with either the 9600Pro for Mac or PC or the X800XT card (by Radeon).
Though it seems like production of the X800XT card has slowed to a crawl, I've found some for sale online. Just nervous, as I've read mixed things!
Your opinion would be welcomed.
Thank you,
Kevin

Vdpau and full screen youtube problems on Nvidia Quadro NVS 140M

I have Nvidia NVS 140M on 64-bit Arch. I am trying to find perfect configuration for my Thinkpad with no luck.
I used to have nouveau drivers, now using nvidia-173xx. The problems are following:
1) YouTube videos:
- with nouveau I was not able to watch any video (it was like a slideshow)
- with nvidia everything works fine.
I'd prefer nouveau than nvidia, because of KMS.
2) Glxgears
As far as I remember, you can check if acceleration is working, using this tool - CPU usage should be not changed after glxgears started. On both drivers (nouveau and nvidia) running glxgears process uses 100% CPU.
3) vdpau
According to this thread, my card supports vdpau. I can not make it to work.
Additional information:
thinkpad ~ $ pacman -Qs nvidia
local/lib32-libvdpau 0.4.1-3
Nvidia VDPAU library (32-bit)
local/libvdpau 0.4.1-1
Nvidia VDPAU library
local/nvidia-173xx 173.14.28-3
NVIDIA drivers for kernel26, 173xx branch.
local/nvidia-173xx-utils 173.14.28-1
NVIDIA drivers utilities and libraries, 173xx branch.
thinkpad ~ $ vainfo
libva: libva version 0.31.1
Xlib: extension "XFree86-DRI" missing on display ":0.0".
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/nvidia_drv_video.so
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
libva error: /usr/lib/dri/nvidia_drv_video.so init failed
libva: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
thinkpad ~ $ cat /etc/X11/xorg.conf.d/20-nvidia.conf
Section "Module"
Load "glx"
Disable "dri"
Disable "dri2"
EndSection
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
thinkpad ~ $ glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer,
GLX_ARB_fbconfig_float, GLX_EXT_framebuffer_sRGB
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float,
GLX_EXT_fbconfig_packed_float, GLX_EXT_texture_from_pixmap,
GLX_EXT_framebuffer_sRGB, GLX_NV_present_video
GLX version: 1.3
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGI_video_sync, GLX_SGI_swap_control,
GLX_EXT_texture_from_pixmap, GLX_ARB_multisample, GLX_NV_float_buffer,
GLX_ARB_fbconfig_float, GLX_EXT_framebuffer_sRGB,
GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: Quadro NVS 140M/PCI/SSE2
OpenGL version string: 2.1.2 NVIDIA 173.14.28
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
OpenGL extensions:
GL_ARB_color_buffer_float, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_fragment_program, GL_ARB_fragment_program_shadow,
thinkpad ~ $ cat /var/log/Xorg.0.log
[ 2830.098]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[ 2830.098] X Protocol Version 11, Revision 0
[ 2830.099] Build Operating System: Linux 2.6.37-ARCH x86_64
[ 2830.099] Current Operating System: Linux thinkpad 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 8 08:34:35 CET 2011 x86_64
[ 2830.099] Kernel command line: root=/dev/sda3 ro
[ 2830.100] Build Date: 04 February 2011 09:38:18PM
[ 2830.100]
[ 2830.100] Current version of pixman: 0.20.2
[ 2830.101] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2830.101] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2830.103] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 12 21:24:44 2011
[ 2830.104] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2830.104] (==) No Layout section. Using the first Screen section.
[ 2830.104] (==) No screen section available. Using defaults.
[ 2830.104] (**) |-->Screen "Default Screen Section" (0)
[ 2830.104] (**) | |-->Monitor "<default monitor>"
[ 2830.105] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 2830.105] (**) | |-->Device "Default nvidia Device"
[ 2830.105] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2830.105] (==) Automatically adding devices
[ 2830.105] (==) Automatically enabling devices
[ 2830.105] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2830.105] Entry deleted from font path.
[ 2830.105] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2830.105] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2830.105] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2830.105] (II) Loader magic: 0x7d3b20
[ 2830.105] (II) Module ABI versions:
[ 2830.105] X.Org ANSI C Emulation: 0.4
[ 2830.105] X.Org Video Driver: 8.0
[ 2830.105] X.Org XInput driver : 11.0
[ 2830.105] X.Org Server Extension : 4.0
[ 2830.108] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
[ 2830.108] (II) Open ACPI successful (/var/run/acpid.socket)
[ 2830.108] (WW) "dri" will not be loaded unless you've specified it to be loaded elsewhere.
[ 2830.108] (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere.
[ 2830.108] (II) "extmod" will be loaded by default.
[ 2830.108] (II) "dbe" will be loaded by default.
[ 2830.108] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2830.108] (II) "record" will be loaded by default.
[ 2830.108] (II) "dri" will be loaded even though the default is to disable it.
[ 2830.108] (II) "dri2" will be loaded even though the default is to disable it.
[ 2830.108] (II) LoadModule: "glx"
[ 2830.109] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2830.118] (II) Module glx: vendor="NVIDIA Corporation"
[ 2830.118] compiled for 4.0.2, module version = 1.0.0
[ 2830.118] Module class: X.Org Server Extension
[ 2830.118] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:19:01 PDT 2010
[ 2830.118] (II) Loading extension GLX
[ 2830.118] (II) LoadModule: "extmod"
[ 2830.118] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2830.118] (II) Module extmod: vendor="X.Org Foundation"
[ 2830.118] compiled for 1.9.4, module version = 1.0.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension MIT-SCREEN-SAVER
[ 2830.119] (II) Loading extension XFree86-VidModeExtension
[ 2830.119] (II) Loading extension XFree86-DGA
[ 2830.119] (II) Loading extension DPMS
[ 2830.119] (II) Loading extension XVideo
[ 2830.119] (II) Loading extension XVideo-MotionCompensation
[ 2830.119] (II) Loading extension X-Resource
[ 2830.119] (II) LoadModule: "dbe"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2830.119] (II) Module dbe: vendor="X.Org Foundation"
[ 2830.119] compiled for 1.9.4, module version = 1.0.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension DOUBLE-BUFFER
[ 2830.119] (II) LoadModule: "record"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2830.119] (II) Module record: vendor="X.Org Foundation"
[ 2830.119] compiled for 1.9.4, module version = 1.13.0
[ 2830.119] Module class: X.Org Server Extension
[ 2830.119] ABI class: X.Org Server Extension, version 4.0
[ 2830.119] (II) Loading extension RECORD
[ 2830.119] (II) LoadModule: "nvidia"
[ 2830.119] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2830.120] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2830.120] compiled for 4.0.2, module version = 1.0.0
[ 2830.120] Module class: X.Org Video Driver
[ 2830.120] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 10:00:06 PDT 2010
[ 2830.120] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2830.120] (--) using VT number 7
[ 2830.124] (II) Loading sub module "fb"
[ 2830.124] (II) LoadModule: "fb"
[ 2830.124] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2830.124] (II) Module fb: vendor="X.Org Foundation"
[ 2830.124] compiled for 1.9.4, module version = 1.0.0
[ 2830.124] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2830.124] (II) Loading sub module "wfb"
[ 2830.125] (II) LoadModule: "wfb"
[ 2830.125] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2830.125] (II) Module wfb: vendor="X.Org Foundation"
[ 2830.125] compiled for 1.9.4, module version = 1.0.0
[ 2830.125] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2830.125] (II) Loading sub module "ramdac"
[ 2830.125] (II) LoadModule: "ramdac"
[ 2830.125] (II) Module "ramdac" already built-in
[ 2830.125] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2830.125] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2830.125] (==) NVIDIA(0): RGB weight 888
[ 2830.125] (==) NVIDIA(0): Default visual is TrueColor
[ 2830.125] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2830.125] (**) NVIDIA(0): Option "NoLogo" "True"
[ 2830.125] (**) NVIDIA(0): Enabling RENDER acceleration
[ 2830.125] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 2830.126] (II) NVIDIA(0): enabled.
[ 2834.780] (II) NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86GL) at PCI:1:0:0 (GPU-0)
[ 2834.780] (--) NVIDIA(0): Memory: 524288 kBytes
[ 2834.780] (--) NVIDIA(0): VideoBIOS: 60.86.3e.00.00
[ 2834.780] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2834.780] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 2834.780] (--) NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0)
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
[ 2834.781] (--) NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): HorizSync range (42.088-49.305 kHz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's HorizSync (32.9 kHz); ignoring HorizSync check for
[ 2834.785] (WW) NVIDIA(0): mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): VertRefresh range (52.000-60.000 Hz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's VertRefresh (39.9 Hz); ignoring VertRefresh check
[ 2834.785] (WW) NVIDIA(0): for mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): HorizSync range (42.088-49.305 kHz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's HorizSync (32.9 kHz); ignoring HorizSync check for
[ 2834.785] (WW) NVIDIA(0): mode "1280x800".
[ 2834.785] (WW) NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1280x800"
[ 2834.785] (WW) NVIDIA(0): is specified in the EDID; however, the EDID's valid
[ 2834.785] (WW) NVIDIA(0): VertRefresh range (52.000-60.000 Hz) would exclude this
[ 2834.785] (WW) NVIDIA(0): mode's VertRefresh (39.9 Hz); ignoring VertRefresh check
[ 2834.785] (WW) NVIDIA(0): for mode "1280x800".
[ 2834.787] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 2834.787] (==) NVIDIA(0):
[ 2834.787] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2834.787] (==) NVIDIA(0): will be used as the requested mode.
[ 2834.787] (==) NVIDIA(0):
[ 2834.787] (II) NVIDIA(0): Validated modes:
[ 2834.787] (II) NVIDIA(0): "nvidia-auto-select"
[ 2834.787] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800
[ 2836.069] (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
[ 2836.069] (--) NVIDIA(0): option
[ 2836.069] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 2836.069] (--) Depth 24 pixmap format is 32 bpp
[ 2836.074] (II) NVIDIA(0): Initialized GPU GART.
[ 2836.084] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 2836.968] (II) Loading extension NV-GLX
[ 2837.035] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 2837.037] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 2837.037] (==) NVIDIA(0): Backing store disabled
[ 2837.037] (==) NVIDIA(0): Silken mouse enabled
[ 2837.040] (==) NVIDIA(0): DPMS enabled
[ 2837.040] (II) Loading extension NV-CONTROL
[ 2837.041] (==) RandR enabled
[ 2837.041] (II) Initializing built-in extension Generic Event Extension
[ 2837.041] (II) Initializing built-in extension SHAPE
[ 2837.041] (II) Initializing built-in extension MIT-SHM
[ 2837.041] (II) Initializing built-in extension XInputExtension
[ 2837.041] (II) Initializing built-in extension XTEST
[ 2837.041] (II) Initializing built-in extension BIG-REQUESTS
[ 2837.041] (II) Initializing built-in extension SYNC
[ 2837.041] (II) Initializing built-in extension XKEYBOARD
[ 2837.041] (II) Initializing built-in extension XC-MISC
[ 2837.041] (II) Initializing built-in extension SECURITY
[ 2837.041] (II) Initializing built-in extension XINERAMA
[ 2837.042] (II) Initializing built-in extension XFIXES
[ 2837.042] (II) Initializing built-in extension RENDER
[ 2837.042] (II) Initializing built-in extension RANDR
[ 2837.042] (II) Initializing built-in extension COMPOSITE
[ 2837.042] (II) Initializing built-in extension DAMAGE
[ 2837.042] (II) Initializing extension GLX
[ 2837.204] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 2837.204] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2837.204] (II) LoadModule: "evdev"
[ 2837.204] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2837.205] (II) Module evdev: vendor="X.Org Foundation"
[ 2837.205] compiled for 1.9.4, module version = 2.6.0
[ 2837.205] Module class: X.Org XInput Driver
[ 2837.205] ABI class: X.Org XInput driver, version 11.0
[ 2837.205] (**) Power Button: always reports core events
[ 2837.205] (**) Power Button: Device: "/dev/input/event4"
[ 2837.216] (--) Power Button: Found keys
[ 2837.216] (II) Power Button: Configuring as keyboard
[ 2837.216] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 2837.216] (**) Option "xkb_rules" "evdev"
[ 2837.216] (**) Option "xkb_model" "evdev"
[ 2837.216] (**) Option "xkb_layout" "us"
[ 2837.264] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 2837.264] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2837.264] (**) Video Bus: always reports core events
[ 2837.264] (**) Video Bus: Device: "/dev/input/event3"
[ 2837.279] (--) Video Bus: Found keys
[ 2837.279] (II) Video Bus: Configuring as keyboard
[ 2837.279] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 2837.279] (**) Option "xkb_rules" "evdev"
[ 2837.280] (**) Option "xkb_model" "evdev"
[ 2837.280] (**) Option "xkb_layout" "us"
[ 2837.284] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2837.284] (II) No input driver/identifier specified (ignoring)
[ 2837.284] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2837.284] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2837.284] (**) Sleep Button: always reports core events
[ 2837.284] (**) Sleep Button: Device: "/dev/input/event2"
[ 2837.306] (--) Sleep Button: Found keys
[ 2837.306] (II) Sleep Button: Configuring as keyboard
[ 2837.306] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 2837.306] (**) Option "xkb_rules" "evdev"
[ 2837.306] (**) Option "xkb_model" "evdev"
[ 2837.306] (**) Option "xkb_layout" "us"
[ 2837.312] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event9)
[ 2837.312] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 2837.312] (**) Logitech USB Laser Mouse: always reports core events
[ 2837.312] (**) Logitech USB Laser Mouse: Device: "/dev/input/event9"
[ 2837.333] (--) Logitech USB Laser Mouse: Found 12 mouse buttons
[ 2837.333] (--) Logitech USB Laser Mouse: Found scroll wheel(s)
[ 2837.333] (--) Logitech USB Laser Mouse: Found relative axes
[ 2837.333] (--) Logitech USB Laser Mouse: Found x and y relative axes
[ 2837.333] (II) Logitech USB Laser Mouse: Configuring as mouse
[ 2837.333] (II) Logitech USB Laser Mouse: Adding scrollwheel support
[ 2837.333] (**) Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 2837.333] (**) Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2837.333] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE)
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 2837.333] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 2837.333] (II) Logitech USB Laser Mouse: initialized for relative axes.
[ 2837.334] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1)
[ 2837.334] (II) No input driver/identifier specified (ignoring)
[ 2837.335] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 2837.335] (II) No input driver/identifier specified (ignoring)
[ 2837.342] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[ 2837.342] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 2837.342] (**) Integrated Camera: always reports core events
[ 2837.342] (**) Integrated Camera: Device: "/dev/input/event8"
[ 2837.373] (--) Integrated Camera: Found keys
[ 2837.373] (II) Integrated Camera: Configuring as keyboard
[ 2837.373] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 2837.373] (**) Option "xkb_rules" "evdev"
[ 2837.373] (**) Option "xkb_model" "evdev"
[ 2837.373] (**) Option "xkb_layout" "us"
[ 2837.382] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2837.382] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2837.382] (**) AT Translated Set 2 keyboard: always reports core events
[ 2837.382] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2837.403] (--) AT Translated Set 2 keyboard: Found keys
[ 2837.403] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 2837.403] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 2837.403] (**) Option "xkb_rules" "evdev"
[ 2837.403] (**) Option "xkb_model" "evdev"
[ 2837.403] (**) Option "xkb_layout" "us"
[ 2837.404] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event6)
[ 2837.404] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 2837.404] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 2837.404] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event6"
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 2837.419] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 2837.419] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 2837.419] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 2837.419] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2837.419] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 2837.420] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 2837.420] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 2837.420] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
[ 2837.420] (II) No input driver/identifier specified (ignoring)
[ 2837.422] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 2837.422] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 2837.422] (**) ThinkPad Extra Buttons: always reports core events
[ 2837.422] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 2837.446] (--) ThinkPad Extra Buttons: Found keys
[ 2837.446] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 2837.446] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 2837.446] (**) Option "xkb_rules" "evdev"
[ 2837.446] (**) Option "xkb_model" "evdev"
[ 2837.446] (**) Option "xkb_layout" "us"

lukaszg wrote:GlxGears still uses 100% CPU - is it OK?
Should I disable both dri and dri2 in xorg.conf, for nvidia drivers?
Dunno. Comment them out, restart X and see what happens.
Last edited by skunktrader (2011-03-13 16:01:02)

How to Install Nvidia Quadro 4000 in Dell R710

Hi All,
I have read a lot about installing the Nvidia Quadro PCIe x16 card in a Dell R710. I know what parts I need to order (Dell GP347 PCI-e Left Riser), but I do not know how to install the 6 pin power cable required by the Nvidia card. Where would I connect it to the Dell R710 motherboard? Is there a place to connect it? If not, is there some type of power supply I can hook the 6 pin Nvidia Power cable and provide power outside of the server? Any help would be appreciated.

This is a bit old now, but thought I would reply as I got this working and very happy with the performance!
In addition to the riser board I needed, there is NO way to provide the power the card needs without an EXTERNAL power supply. There is a really small box listed on Newegg called "ePOWER EP-450CD 450W ATX12V/EPS12V Modular Juice Box-Dedicated Graphics Card and CPU Power supply". Buy it and run the GPU power cable from an empty PCI slot out the back of the Dell Server.
I also purchased NVidia Quadro 4000 2 GB GDDR5 PCIe video cards for each of my ESXi 5.5 servers. Also, I left my built-in video graphic card enabled and it is still primary for my Hypervisor.
Download and install the NVidia ESXi drivers from their website and follow the directions to install them. Reboot.
I use sVGA with my Horizon Desktops and downloaded a trial version of Sketch-Up to test 3D. They have a community of users who post 3D renderings and you can download one directly from the Sketch-up Program. Cruise around and check the performance.
As a side note, I noticed IE worked way worse by using the GPU when Browsing the internet. Go to Advanced Settings in IE, and the top option states "Use software rendering instead of GPU". Making that change makes IE work as expected.

Dell Latitude D600 Wifi Issue

Hello everyone,
This is my first time installing Arch Linux, and I like what I see so far! My only problem is getting the wifi card recognized on my Dell Latitude D600.
lspci displays this:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03)
00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon RV250 [Mobility FireGL 9000] (rev 02)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
02:01.0 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:01.1 CardBus bridge: O2 Micro, Inc. OZ711EC1 SmartCardBus Controller (rev 20)
02:03.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
My wifi card is the last entry.
I've installed the recommended driver (ipw2200-fw) from <https://wiki.archlinux.org/index.php/De … eless_2200>, but the wiki page is pretty old, and the setup requires the rc.conf file which no longer exists (as of this year).
iwconfig shows:
lo no wireless extensions.
eth0 no wireless extensions.
...but not the wlan0 I need.
I've tried:
rmmod ipw2200
modprobe ipw2200
as shown on <https://wiki.archlinux.org/index.php/Wi … nd_ipw2200> with both the ipw2100 and 2200 drivers, but with no avail.
I really don't want to trouble the community with such a simple question, but the wiki has me stumped at this point.
Any help please?

02:03.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
...but not the wlan0 I need.
I've tried:
rmmod ipw2200
modprobe ipw2200
I would have thought that you should only need in your case the package ipw2100-fw installed by making sure your system is up to date with the command pacman -Syu as root - and then pacman -S ipw2100-fw
If you reboot after that then the ipw2100 module that seems to be needed at least according to the lspci output you quoted should automatically load and work.
What desktop are you running? If you have KDE then you should be able to use the network icon to click and select a wireless network and work from there. If you are using only the console then you will need to use one of the command line wireless facilities (eg wicd) to get the wireless up and running.
Since your device is listed as 2100 loading the ipw2200 module likely won't work. Hope this helps.

Dell Latitude D620 Won't boot after install

I installed Solaris 10 via DVD on my D620. The install goes fine and completes successfully. When I try to boot for the first time, I just see a bunch of memory addresses on the screen only for like half a second. They just blink on the screen for a fraction of a second with no hope of even seeing (right after the SunOS trademark screen) and then it reboots. Constantly. I don't even get the change to see what the error message is.
I'm on the latest BIOS from Dell and the HCL on Sun's website says this configuration is fully supported. Does anyone have any ideas how I can either find out what the error message is or fix it so it boots?
Thanks,

Thanks for the tip. Yes it does have a SATA drive. I managed to get it working by editing the entry in GRUB:
Solaris 10 11/06 s10x_u3wos_10 X86 - pressed 'E' to edit
kernel /plaform/i86pc/multiboot
added "kernel/unix" (w/o quotes) to the above line:
kernel /plaform/i86pc/multiboot kernel/unix
Don't ask me why or how I figured that out or most of all WHY it works . It will boot fine after editing that entry in grub.

Nvidia Quadro NVS 110M (Dell Latitude D620) driver issue

Similar Messages

Maybe you are looking for