Nvidia realeases new drivers 2-13

here ya go http://www.nvidia.com/object/winvista_x86_00.64.html

[*]Adds support for GeForce 8800 GTS 320 MB<[*]Beta driver for NVIDIA SLI? support for GeForce 8800 GTX/GTS GPUs<[*]This driver supports the following features:
Single GPU support
DirectX 9 support for GeForce 6/7/8 series GPUs<
DirectX 0 support for GeForce 8800 GPUs<
OpenGL support for GeForce 6/7/8 series GPUs<
<
NVIDIA SLI support
DirectX 9 support for GeForce 8800 GPUs<
OpenGL support for GeForce 8800 GPUs<
<
<[*]DirectX 9 and OpenGL NVIDIA SLI support for GeForce 6 and 7 series GPUs and DirectX 0 NVIDIA SLI support for GeForce 8800 GPUs will be available in a future driver<[/list]

Similar Messages

NVidia's New Drivers are No Good

For kicks, this evening I took a perfectly working workstation, made a Norton Ghost backup, and proceeded to install the latest nVidia driver (Jan 9, 180.2).
When I fired up Premiere CS3 (been running on that workstation for about a year), I knew things weren't right when inside a project, I click a tab to change timelines and the whole screen goes black.
On another test, I imported some XDCam folders and the screen went black.
An hour later, the system goes to standby (sleep) mode and shortly thereafter, I try to bring the system back up, but it never recovers.
Back to Norton Ghost image of the working system with a driver from over a year ago that is stable. These new nVidia drivers are probably half the problem we're all having with CS4. If they can totally screw up a CS3 setup, then I have no trust in them for anything at all.

The Auzentech is about a month old.
The MotU 896 is one of the most mature, established sound hardware devices in the industry.
At any rate, I could no longer waste time with this.
I downgraded to CS3 and all of the problems are gone. CS3 runs just like our other CS3 workstation. Smoothly.

T61p Nvidia drivers - new drivers give jerky DXVA playback

I gave another shot at installing the latest drivers for my Nvidia FX 570M, but it seems that CUDA does work well when there are other applications running in the background. When I play 1080p (or 720p)mkv files, there is a jerkyness, audio and video halts for a few seconds and then it resumes.
With the old drivers from Lenovo, everything seemed fine, but the drivers did seem to have a few bugs in the interface, or retaining the settings for increased refresh rate.
Does anyone else have these issues?
Thanks,
NVIDIA System Information report created on: 05/29/2011 12:04:56
[Display]
Operating System:    Windows 7, 64-bit (Service Pack 1)
DirectX version:    11.0
GPU processor:        Quadro FX 570M
Driver version:        270.61
DirectX support:    10
CUDA Cores:        32
Core clock:        475 MHz
Shader clock:        950 MHz
Memory clock:        702 MHz (1404 MHz data rate)
Memory interface:    128-bit
Total available graphics memory:    2015 MB
Dedicated video memory:    256 MB GDDR3
System video memory:    0 MB
Shared system memory:    1759 MB
Video BIOS version:    60.84.51.00.00
IRQ:            16
Bus:            PCI Express x16
[Components]
nvui.dll        7.17.12.7061        NVIDIA User Experience Driver Component
nvxdsync.exe        7.17.12.7061        NVIDIA User Experience Driver Component
nvxdplcy.dll        7.17.12.7061        NVIDIA User Experience Driver Component
nvxdbat.dll        7.17.12.7061        NVIDIA User Experience Driver Component
nvxdapix.dll        7.17.12.7061        NVIDIA User Experience Driver Component
NVCPL.DLL        7.17.12.7061        NVIDIA Compatible Windows Vista Display driver, Version 270.61
nvCplUIR.dll        3.6.750.0        NVIDIA Control Panel
nvCplUI.exe        3.6.750.0        NVIDIA Control Panel
nvWSSR.dll        6.14.12.7061        NVIDIA Workstation Server
nvWSS.dll        6.14.12.7061        NVIDIA Workstation Server
nvViTvSR.dll        6.14.12.7061        NVIDIA Video Server
nvViTvS.dll        6.14.12.7061        NVIDIA Video Server
NVSTVIEW.EXE        7.17.12.7061        NVIDIA GeForce 3D Vision
NVSTTEST.EXE        7.17.12.7061        NVIDIA 3D Vision Test Application
NVSTRES.DLL        7.17.12.7061        NVIDIA 3D Vision Module (0)
nvDispSR.dll        6.14.12.7061        NVIDIA Display Server
NVMCTRAY.DLL        8.17.12.7061        NVIDIA Media Center Library
nvDispS.dll        6.14.12.7061        NVIDIA Display Server
PhysX        09.10.0514        NVIDIA PhysX
NVCUDA.DLL        8.17.12.7061        NVIDIA CUDA 4.0.1 driver
nvGameSR.dll        6.14.12.7061        NVIDIA 3D Settings Server
nvGameS.dll        6.14.12.7061        NVIDIA 3D Settings Server
T61p T7500, Quadro FX 570M, 4GB, 60GB Patriot Pyro, XP Pro
X61t Tablet, L7300 Centrino vPro, Windows 7 Home 64-bit
tpfancontrol installed on all systems
Solved!
Go to Solution.

It seems like the problem is a conflict with other applications that use hardware acceleration. I disabled it in Firefox, and now video playback is fine.
I wonder if I should alert Nvidia or Mozilla about the problem. Given the problem has consistently been with newer drivers, it seems like it is Nvidia's responsibility.
T61p T7500, Quadro FX 570M, 4GB, 60GB Patriot Pyro, XP Pro
X61t Tablet, L7300 Centrino vPro, Windows 7 Home 64-bit
tpfancontrol installed on all systems

New nVidia 6.70 drivers

Recently i got nVidia nForce 6.53 drivers on my computer installed, they are working well. I would like to install the latest nForce 6.70 from nVidia and i am not sure how to do it. Do i have to uninstall the old ones first ?
Thanks in advance.

1. Yul is not using RAID;
2. Of course Windows will not see the RAID arrays after uninstalling the drivers ... installing the new drivers will make the array come back again, though - so I do not think that you actually killed your system (the arrays were just temporarily out-of-sight ). I have done this numerous times before I switched to a Promise card;
3. If the OS is on the array, then of course the situation is a bit more complex, but even then you will not kill your system right away;
4. it is good advice and generally accepted to remove remainders of old (Nvidia-) drivers, before installing new ones
Hans

After effects instantly crashes while using opengl with nvidias new drivers 178.24

Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
I have Geforce 8600 GT.
As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
Thanks
/ Olle

I use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
*Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
*HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
*Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
*Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
*Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
*Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
*Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
/ Olle

MSI GT683r- Nvidia GTX 560m new drivers ?

I would really really appreciate if anybody can tell me where can i find the new drivers for this machine since i cant play any new games like Need for speed or battlefield 3. I know this is not a strong reason to ask for but i would really appreciate any help toward this issue
Thank you
P.s the required drivers are 283.something.

Just download from nvidia homepage, works for me

New NVidia 3.13 drivers now XP Pro Hangs

I installed the new drivers and now my machine won't boot. It gets to the XP PRO startup screen And Hangs. Anybody have a fix?

Quote
Originally posted by Roger Wilco
Quote
Originally posted by Dancer
I installed the new drivers and now my machine won't boot. It gets to the XP PRO startup screen And Hangs. Anybody have a fix?
See if this works:
Press F8 repeatedly as your machine boots up, until it comes to a selection screen.
Choose "Start my computer with last known good configuration" (or something to that effect).
This should roll back the nForce drivers, and windows should boot normally. One other thing, I'll assume you installed the SW IDE driver? (it asks you during the nForce setup, and you have to choose yes or no).
If you did install the SW IDE driver, when you get back into windows, reinstall the nForce drivers, but this time choose NO! when it asks to install the SW IDE driver.
Hope that helps, let me know!
Roger
Great Job Roger, that did the trick!
Thanks so much

New drivers won't work for X-Fi Xtreme Gamer

I use Windows XP SP 2 with my X-Fi Xtreme Gamer.
I used the Device Manager to uninstall my old drivers (v2.5.0006), rebooted, cancelled the Windows new-hardware popup, and installed the new drivers (v2.5.0008). I had no sound immediately after the installation, though I think I should have heard mouse-clicking sounds and sounds that accompany opening and closing windows from my desktop and Windows Explorer. After restarting after the installation, I still had no sound.
To restore sound, I uninstalled the new drivers and reinstalled the old ones.
Has anyone else encountered this trouble Does anyone know what is happening
Here is some information on my system:
Operating System: Microsoft Windows XP Home Edition
Version: 5..2600 Service Pack 2 Build 2600
System Name: YOUR-C7B5E9C69F
User Name: YOUR-C7B5E9C69F\Russell
Windows Directory: C:\WINDOWS
System Directory: C:\WINDOWS\system32
Boot Device: \Device\HarddiskVolume
Locale: United States
Hardware Abstraction Layer Version = "5..2600.280 (xpsp_sp2_rtm.040803-258)"
Time Zone: Pacific Standard Time
System Manufacturer: Magnell
System Model: ABS Ultimate M6
System Type: X86-based PC
Motherboard: ASUS A8N-SLI Deluxe NF4 (Socket 939)
Processor: x86 Family 5 Model 7 Stepping 0 Authentic AMD ~263 MHz (AMD Athlon 64 FX-55 (2.63 GHz), socket 939
BIOS Version/Date: Phoenix Technologies, LTD ASUS A8N-SLI DELUXE ACPI BIOS Revision 006, 3/3/2005
SMBIOS Version: 2.3
Memory: Dual DDR GB PC3200XL Corsair
Total Physical Memory: 2,048.00 MB
Available Physical Memory: .68 GB
Total Virtual Memory: 2.00 GB
Available Virtual Memory: .96 GB
Page File Space: 3.85 GB
Page File: C:\pagefile.sys
Video: EVGA NVidia GeForce 6800Ultra 256MB
Video Card Drivers: NVidia Forceware drivers version 6.4.00.756
Hard Dri've: Western Digital Raptor 74GB WD740GD 0,000RPM 8MB
Sound: Creative Labs Soundblaster X-Fi Xtreme Gamer (driver v2.5.0006)
CompUSA Dual Format Double Layer DVD+/-RW USB (R = 6x DVD, 48x CD)
Monitor: Samsung SyncMaster 93c 9 LCD
Mouse: Logitech G9 Laser (Driver v.4.22.52)
Keyboard: Ideazon MERC Stealth Illuminated Gaming Keyboard (Model No. KUH0702)
Printer: HP Photosmart C5580
Mass Storage Device: Corsair Flash Voyager 2.0 GB (USB 2.0 flash memory dri've)
Power: PC Power and Cooling Turbo-Cool 50
Email: Outlook Express version 6.00.2900.280 (xpsp_sp2_rtm.040803-258)
Virus and Spyware Protection: Norton Internet Security 2009
Internet Service Provider: SBC/Yahoo! Pro DSL

I have solved my own problem. The trouble was that using the Device Manager to uninstall my old drivers did not work. Apparently a file that needed to be deleted was not deleted, and that file prevented the new drivers from working. I finally got the new drivers to work by using the following procedure, which except from some notes I have inserted, was obtained by email from Creative support:
1. Go to Control Panel, Add Remove Programs and un-install all listings related to your audio card. Do not restart your computer when prompted so.
2. Go to Control Panel, and switch to Classic View. Click System, Hardware tab, Device Manager button and delete all sound cards entries in Sound, Video and Game Controllers as well as any previous sound card entries from the Device Manager. ?Note: Personally, to get to Device Manager, I don?t follow these directions. I do this: click the Windows Start button + E, look to the left and right-click My Computer, click Properties, click Hardware tab, click Device Manager.
3. Reboot the computer and cancel out of any driver installation if you are prompted. Insert the Creative Sound Blaster installation CD into your CD-ROM dri've. Exit from the installation wizard if it autoruns.
4. Click Start, Run and then Browse. Browse to Z:\Audio\Drivers\CTZAPXX.EXE, where Z represents the CD Rom Dri've. Choose YES if you receive a prompt "Overwrite existing shared creative audio driver files?" NOTE: This CTZAPXX.EXE file could not be found on my X-Fi Xtreme installation disk by using the Z:\Audio\Drivers\CTZAPXX.EXE path. I had do use the Windows Search engine to do a search on my X-Fi Xtreme installation disk. After finding it, I highlighted the CTZAPXX.EXE program, opened it, and continued with these driver-uninstallation instructions. This seems to be a critical step. If your installation disk doesn't have this file, or if you don't have an installation disk, I suggest doing a Web search for CTZAPXX.EXE. It's a Creative Update Utility, so I don't think it will harm your computer. But I use Windows XP, and I don't know anything about Vista.
5. Select Driver un-installation for WDM drivers and click OK.
6. When prompted to restart, say No.
7. Click Start, Run, type MSCONFIG and press Enter.
8. Check the box next to Selecti've Startup and deselect Load Startup Items.
9. Select the SERVICES tab and select Hide All Microsoft Services.
10. Uncheck all results and click OK.
1. Browse to the C:\Temp folder and C:\Windows\TEMP (if it exists) - all files and folders in the temp folder need to be either deleted or moved to a new folder. ?NOTE: I had to go to my C:\Windows\TEMP file to do this step. Also, I took care to copy and paste all of these TEMP files to a new folder before I tried deleting them. Then I deleted all the Windows\TEMP files that I could. Some would not delete. Indeed some of these files could not be copy and pasted to the new folder. But that was okay. I just left alone those files I could not copy and delete, and I proceeded to delete all of the other files. The TEMP files that I could not delete did not affect my uninstallation of old sound drivers or the installation of new sound drivers.
2. Browse to Program Files, Creative and delete the Sound Blaster Folder - if you get a file that won't delete, right click on the file, click Properties and clear all the attributes. The file should then be able to be deleted.
3. Empty the Recycle Bin, and reboot the computer.
4. If you wish to install your new sound drivers, do so now. Otherwise, go to the next step. If you do install you new drivers?which I would do?don?t restart after the installation. Do the next two steps first.
5. Click on Start, Run. Type MSCONFIG and press Enter.
6. Select Normal Startup, and press the OK button.
7. Reboot the computer
8. At this point I copy-pasted all those Windows\TEMP files from my new folder back to their proper place in Windows\TEMP. Then I deleted the new folder. While restoring these TEMP files to the Windows\TEMP file, I got a couple of messages telling me these files already existed. I clicked No. That is, I did NOT replace or overwrite any existing files in the Windows\TEMP folder.
9. The new sound drivers should now be working.
Message Edited by Solipso on 04-22-2009 07:6 AMMessage Edited by Solipso on 04-22-2009 07:7 AM

The nVidia 258.96 drivers crash Photoshop CS4 (64bit)

I have the latest nVidia drivers installed yesterday and I noticed that PS CS4 crashes within 15minutes of use (by crashing the display driver and then crashing itself). Any solutions for this issue? I am an advanced user (11years of PC usage and IT-student for 5 years etc.) so this is either PS or nVidia driver issue, have posted about this now to both manufactor forums. I try next to just disable the GL acceleration from PS settings for possible temp. solution for this. Would love to know what's causing this.
PS. The gfx card temps are fine etc.
Related specs:
Windows 7 Pro 64bit
ASUS P5Q Deluxe mobo
E8500 @ 4ghz cpu
MSI GTX 275 gfx card
4gb of ram

As a workaround try the various Advanced OpenGL options. There was a time a long while back when I was using CS4 and a (then-current) older driver set, and as I recall switching to Basic OpenGL settings helped me work around a problem that was later fixed in newer drivers.
I've noticed that OpenGL implementations are pretty actively being maintained by all the video card makers in the time after Photoshop CS4 and CS5 released. It's good that a serious application has put some real pressure on the driver makers to tidy up the software. OpenGL is actually getting to where you can rely on it now.
-Noel

Install new drivers uninstall or just install over the old ones

do i have to uninstall my old mobo drivers before installing the new one's? or just install over them??

Quote from: Supershanks on 29-December-05, 04:31:38
It's safer to just install the new ones over the old with mobo drivers. It's graphics drivers particularly if changing between ati/Nvidia that sometimes require removal b4 installing new ones.
luck
Yeah, I just overwrite the mobo drivers with new ones as they usually only differ in small details.
For Vid Card drivers I like to use Driver Cleaner (Google for it - It's free & it will get rid of Mobo & Sound Card drivers too, if you wish) to root out all traces of a previous driver set before installing new ones. Unlike mobo drivers, different versions can vary greatly in content... if some of the old code is left over, it may not allow the new drivers to work properly.

Over a year with no new drivers, what now creative

Do we buy the next great sound card and throw away our $300.00+ old card. Or do you get off your colecti've asses and make this card work the way it supposed to I read that your in?bad for money, gee that's a suprise. The way you treat your customers it's a wonder your not bankrupt. Well this will the LAST sound card I ever buy from you guys unless I see some support & concern from you. You can't even get the card working right in vista and I guess xp (which a lot of people still use, myself included) is just a fond memoryMessage Edited by gunslinger on 0-28-20070:02 AM

Except your logic is flawed.
They have released drivers. And for the most part, the drivers work. It's been evidenced by Daniel K's Audigy driver pack.
Why would they need to release drivers everyday when the drivers they have published are working? Your defense of not buying a Mercedes without an engine is flawed given that the drivers work. If you were to apply proper logic to that sort of analogy, it would be closer to you asking me... say... you wouldn't buy a Mercedes without a jet engine would you?
And the answer is I would. Because I don't need a jet engine. Just like you don't really need new drivers everyday. You're expecting constant driver releases for a product that's over 3 years old.
Why don't you complain to nVidia or ATi with their unified driver packs? The best working drivers for their 3+ year old drivers are over a year old as well.
If you want a very specific feature, tough. Creative's job isn't to pander to every little request just because you spam the forums requesting it. It doesn't make it popular or the desire of the majority. Nor do you know whether or not your request would break every other feature. As Creative hasn't blocked it and has allowed driver modification, even allowing the links posted on their own forums, if you feel you really need a jet engine for your Mercedes that badly, you could just modify it yourself.Message Edited by keLston on 0-29-200708:2 PM

I Found New Drivers For The Msi Stereo 2 Glasses!!!!

ALELUYA!!!!
EXELENT!!!! I MADE IT!!!
Well for anybody with this problem i found a solution!!!
Well, i found a new drivers..
First.. msi don't make any more your own drivers.. now the msi video adapters use nvidia drivers.. if they have nvidia chipset..
Continue..
Go to this page, and donwload the stereo driver
http://www.nvidia.com/object/3dstereo_45.23
I install with a 50.x and dosent work.. you must uninstall the driver and install the 45.23 driver of nvidia..
http://www.nvidia.com/object/winxp-2k_45.23.html
Well if you do correct. you can play again with the stereo glasses......
and don't try to install newest drivers.. 8)
Now i must go to play Postal 2 in multiplayer with my msi stereo glasses
jejejeje ... nos vemos y suerte para todos...
PENTIUM 4 - 1.6 MHZ
MSI Gforce 4 MX 440 64mb
MSI STEREO 2 GLASSES
MSI Motherboard 485 Pro 2 c
512 MB PC 133
VANTEC Fan Vga / Chipset
QUANTUM 30 GB
VIEWSONIC E70 - 17
CREATIVE SB LIVE DIGITAL
2 VANTEC Cable IDE 90 CM UDMA 33/66/100/133
LG CD-ROM 52X max
CREATIVE DVDROM 6X
CREATIVE DRX 3 DVD DECODER.
PANASONIC CD.RW X4 SCSI
ADAPTEC SCSI Adapter.
VANTEC Multi Function Pannel.

Although you have the new USB drivers for pocketmac, you should first install pocketmac version 4.1.25, then install the driver patch.
Wrt MissingSync, it appears that it will work properly with your new macbook only after you install the latest version of Mac OS X 10.5.6. See https://support.markspace.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=315.
Good luck!

New Drivers ,When ???

[ALIGN=center][size=15]
New Drivers ,When ??? [/SIZE] [/ALIGN]

From the Audio Driver Problem thread:
Quote
Posted: Sat Oct 19, 2002 3:13 pm Post subject:
I talked to NVIDIA about the BSOD on nForce 1 and they have a driver that fixes that. We should be seeing that driver soon.
by guy at http://www.bjorn3d.com/

Which of these 2 NVIDIA Discrete VGA drivers I should download.

I'm downloading All Windows 10 Drivers as a back up ,
http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/ideacentre-k-series-desktops/lenovo-k450e-desktop But I'm Not sure which of these 2 NVIDIA Discrete VGA drivers I should download.Which one should I download #1 or #2 ?? # 1 =Display and Video Graphics
NVIDIA Discrete VGA driver for Windows 10 (64-bit) - Desktop
Windows 10 (64-bit)
NVIDIA Discrete VGA driver
353.24
7/10/2015
NVIDIA Discrete VGA driver READ ME
353.24
7/10/2015 #2 =Display and Video Graphics
NVIDIA Discrete VGA driver for Windows 10 (64-bit) - Desktop
Windows 10 (64-bit)
NVIDIA Discrete VGA driver
353.54
7/29/2015
NVIDIA Discrete VGA driver READ ME
353.54
7/29/2015 I have at Present on my PC a
NVIDIA GeForce GTX 750Driver Provider NVIDIADriver Date 7/22/2015Driver Version 10.18.13.5362
------------------------------Thanks
My PC
LENOVO 10181 Lenovo K450e Desk Top PC
Windows 10
3.60 gigahertz Intel Core i7-4790
32702 Megabytes Usable Installed Memory
1972.20 GB Hard Drive or 2 TB
Graphics
NVIDIA GeForce GTX 750 2GB

you can obtain the latest Nvidia Forceware display drivers from here: nVidia Drivers
if you have further problems, you should start a new topic, and post full details of your PC hardware, as well as more information on the problem you are having, in order to get better help

Nvidia 185.13 drivers available

For you cutting-edge types, here are links to nvidia 185.13 drivers. They're at beta. Use at your own risk, I imagine. Post your results, please.
ftp://download.nvidia.com/XFree86/Linux-x86_64/185.13/
ftp://download.nvidia.com/XFree86/Linux-x86/185.13/
Last edited by dhave (2009-03-14 00:48:50)

I guess I need to go over to NV news and post or file a bug .... 185.13 does the same for my Geforce 7200 (arch64) that 180.29 did -- random screen flickering, and eventual hard lockup. 177.82 works great! Darn, I was hoping they'd fix that
Scott
Edit: Or I can go read the common problems FAQ there and fix it by adding pci=nommconf to my grub line. Well, that was easy. Sorry for the rant, but I didn't have to use that before the 180 series
Last edited by firecat53 (2009-03-14 04:23:05)

Nvidia realeases new drivers 2-13

Similar Messages

Maybe you are looking for