Nvidia Settings not saved or dont load after reboot

Hi there , look well i try to put the follow settings :
Well during my current session that apply without problems , well when i reboot , or shutdown after i power on the pc . the settings are reset to :
How i can saved and load the settings when i start my session again , because i try to put in my ~/.xinitrc
the follow lines :
nvidia-settings --load-config-only (this dont work for i want load the settings when i start my session)
nvidia-settings -a InitialPixmapPlacement=2 (For Firefox , i dont know if this works or not)
well , you have another ideas , to solve this ???
thank you for any answer you can give me.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
-- Tell me mod , how i can put the Thumbnail , when the source site , dont give the code from the site to put thumbnails , this forum support make the thumbnail??? ---
Last edited by inukaze (2014-06-12 15:08:39)

What DE are you using? (if any) I have a similar problem since the last Gnome 3.12, doesn't matter where I put the command "nvidia-settings --load-config-only" it just doesn't work. I have to either open the GUI or issue the command on the terminal for it to happen, I tried with ~/.config/autostart/ /etc/xdg/autostart/ with a .xprofile file, a .xinitrc, nothing works, I can't tell from where this problem originates. Other programs start just fine with the mentioned methods, then it must be something wrong with the way nvidia is invoked I guessing, a couple of months ago was working flawlessly.
Last edited by RJQ (2014-06-20 21:29:31)

Similar Messages

I have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.

i have lost all my notes saved on my iphone after syncing it. and my default mailbox is gmail. notes were very important. and now i dont know how to get them back. can anyone help me out please? thanks in advance.

Try this ..
On your Mac open System Preferences > iCloud
Deselect the box next to: Notes
Then reselect it.
Give iCloud a few minutes to re sync the data.
Other than that, try Time Machine > http://pondini.org/TM/15m.html

ICloud mail settings not saved in System Preferences on Mountain Lion

I note that iCloud mail settings not saved in System Preferences on Mountain Lion even if I tick mail in Icloud then close system preferences then open system preferences and it is untiked again?
Does anyone know how to fix this?
Cheers
Paul

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

"Desktop & Screen Saver" settings not saving upon reboot.

"Desktop & Screen Saver" settings not saving upon reboot. Settings are always set back to factory default upon computer startup. Need help! Please!

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’renot going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

Pages is not saving document correctly. After saving the changes either do not appear or you can not open the file. The error is "not a valid format" I am in Pages '09 4.1 (923). I also use Parallels. Anyone having similar issues?

I'm not sure that Lion AutoSave feature apply to network servers.
I'm just sure that the Versions feature doesn't.
Yvan KOENIG (VALLAURIS, France) samedi 21 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Windows 8.1 folder view settings not saved

Hello, Everyone
Windows 8.1 Each folder view settings not saved what i can do.I
want different view settings in each folder likes folder 1 i want large thumbnails & folder 2 small
What i can do to resolve the issue thanks in advanced.
I don't have any backup no system restore I also try to rest or restore default view settings but none are working for me.

Hi,
This is default behavior. It is not possible to set Windows Explorer to remember individual folder view settings for folders included in libraries. All libraries and its included folders share the same view.
Karen Hu
TechNet Community Support

VPN settings not saved after upgrading ipad

I got an ipad mini so I did a backup of my ipad 3 and restored that copy to the ipad mini.
Everything was restored ok with the exception of my VPN settings, it's a VPN from work and now I can only access that network from my ipad 3, not form ipad mini.
Please help

I'm having the same problem too. I backed up my iPad 3 settings and downloaded to my iPad mini, now the exchange email settings won't save.
The credentials are exactly the same as my iPhone, bit it keeps giving the message 'unable to verify account information'
Anyone else having this issue with the iPad mini not saving settings?

Nvidia settings not saves and applied on setup

I have this problem using nvidia settings for the nvidia driver 295.33-1. I am trying to tweak gamma levels and varius otehr settings using nvidia control panel. I save the settings in .nvidia-settings-rc in my home folder, but when I log out the settings are restored to their defaults.
I the following bash script to load the nvidia settings.
#!/bin/bash
nvidia-settings --load-config-only
nvidia-settings -a InitialPixmapPlacement=2
However the only way now to apply my selected settings is to open nvidia control center every time I log in.
Any help or advice would be greatly appreciated.

Run as root?? That's obviously not what's intended - it's saved in $HOME.
How can you expect the setting to take effect, when it's not even present? I see no "pix"-related line in ~/.nvidia-settings-rc . You could ask for it to be included, in the nvidia forum.
Running "nvidia-settings --load-config-only" changes the settings for that session only, that's correct. What's the problem with that?

Outlook view settings not saved

I have one user who looses all View settings when restarting Outlook. Occasionally they will save, but it is very rare. Setting the Reading Pane to Off is one good example of a setting that does not save.
The creation of new Views is also not saved. After restarting Outlook, the new View does not appear in Manage All Views.
I have tried creating a new Outlook profile and I'm told that Office 2013 C2R has been re-installed since this problem started.
Outlook 2013 Click-To-Run via an Office 365 E3 subscription. Exchange Online mailbox. Windows 7 Pro 32-bit.
Any help would be appreciated.

Hi,
Basically, Outlook view settings are stored in the default data file. If the data file is corrupt or recreated every time Outlook restarts, the view settings may be not saved.
Does the user use Outlook with Cached Exchange mode enabled? If so, please go to
C:\Users\%username%\Documents\Outlook Files and check if you have multiple .ost files in the folder.
In addition, you may try to switch to turn off Cached Exchange mode and then test this issue again.
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

6303i - display settings not saved!

Hello - I have updated my 6303i to the latest firmware from the nokia site.
Everything works fine but now any chance I make to my display settings (e.g. wallpaper) are not saved, i.e. the change is being populated until the next reboot of the device. Once I rebooted the device, all my display settings changes are lost and e.g. I am back with a device with no wallpaper.
Any idea what is going on?
thanks

The problem came back a while after installing 10.10.2.
However, it does seem to have been fixed by 10.10.3. Hooray.

User Settings Not Saved

Hello,
I am using the VB .Net Autoupdater for my app, its working perfect however.
Lets say I am using version 1.0.0.10, Initially when the app ran after I installed it I had to fill in a bunch of user settings via a form a created.
I can close the app, re-open it and the user settings are saved, all is good. Now
I need to make a change and now have version 1.0.0.11 I use the autoupdater and it pulls down the .exe file overwrites the existing .exe.
Now when I launch the app again, the correct version is used however I have to re-enter my user settings again.
How can I preserve my user settings without using a Click Once install?
Thanks
MW

Sure,
I'm always open to learn new ways of doing something.
Thanks
MW
Ok, have a look at the code that I posted on a page of my website here.
It's very specific to what you want saved and how it's to work, so that's what you'll see: It's very much customized to what he wanted.
One important part is what you'll see early on:
Private Shared _instance As Settings
and this:
Private Sub New()
End Sub
Those are private, so only that class can access it. The backing field (variable) is shared so that it's relevant to the class as a whole, not to any instance of it; that is -- there can only ever be one instance of it.
The constructor is parameterless and PRIVATE, so that the consumer of that class can't create an instance; that's only done through the shared method meant to do it:
Public Shared Sub GetInstance(ByRef instance As Settings)
See what I mean?
Still lost in code, just at a little higher level.

Some settings not saved in Presets file

I'd like to setup my fme environment with preset Xml files
(and with some dirty scripting hacks, we make the app load them
automatically).
Unfortunately, not all the Device settings are saved. There
is a tuner specific Settings tab whose settings are not saved. So
if I want to change the actual TV channel I have to use the GUI.
Other settings (like crossbar_input) are found in the XML file.
Is there a way to set entries that are not saved by the GUI
directly in the XML presets file and make fme use them?

What you're looking for is startup.xml, which will be in the
application data directory for the current user. On my Vista
machine, the path looks like this:
Drive:\Users\Admin\AppData\Roaming\Adobe\Flash Media
Encoder\startup.xml
that's where all of the current UI settings are stored. So
you know, startup.xml is UTF-16 encoded and it needs to stay that
way, and (for some reason) there needs to be a blank line at the
end of the file.
Hope it helps

Int'l keyboard settings not saved during reboot

I have a G5 tower that I updated to Leopard. Generally, everything seems fine but there is one thing that is irritating:
I have US English set as my main keyboard, but I often switch to Japanese and Korean to insert a few characters. So, in my keyboard set up I have US English, Japanese, Korean and the the Character Palette.
After the Leopard update, whenever I have to reboot the system these settings are not saved and I have to go back in and add the various keyboard set ups. I want US English as the main keyboard, but after a reboot Japanese is the default.
Note: I bought the system in Japan a few years ago when I was based there.
Thank you for any advice/help.

It fixed itself somehow

Settings not saved correctly

Saving that always a file should be opened with a program does not work correct.
I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

Graphic EQ settings not saving??

Hi. I've just installed an old version of soundtrack 1.2 which I've never used before but I'm very familiar with other DAWs and finding this nice to use.
I'm using it for live backing track purposes with 10 songs in sequence in their own tracks and the plan was to have the Apple graphic EQ assigned to every track so that I can EQ each song to sound it's best at gigs. The problem is that for some reason each time I've set them, saved session and rebooted, all the EQs have been reset to flat (either that or simply not saved).
I have now removed all Graphic eqs and I've assigned Ozone to each track temporarily (risking CPU overload really) so that it's usable and the Ozone settings are saving fine.
Can anyone shed some light please, this is weird. (incidentally, the Graphic EQ checkboxes are all checked in effects window).
Thanks- grateful for any help.

Hi,
10 songs in sequence maybe too much, Graphic EQ should can save all the settings.
audio software

Nvidia Settings not saved or dont load after reboot

Similar Messages

Maybe you are looking for