Nvidia sound driver fix for Neo 2

Hi
I was after the fix that gets the nvidia sound drivers to work for this motherboard or for most nf3 chipset motherboards.
I found a thread before that details what needs to be done but i have lost it now cant find it anymore. If anyone knows how to fix this dreadful sound issue on the Neo2 it would be much appreciated.
Cheers

y'ain't got an nVidia soundchip on that mobo, but a realtec... so install the sound drivers from cd, or the realtec website, not the sounddrivers from the nvidia chipset install thingy

Similar Messages

  • ForA1354477: problem with realtek sound driver download for windows 7

    I recently did a clean install of windows 7 enterprise and I lost the option on the sound recording page for stereo mix.  I found a driver update on the toshiba website for my machines realtek sound driver for windows 7 so I tried it and it worked (sort of).  Now I have the stereo mix option set as default but I also cannot make any changes in the sound recording page (the tabs are nor functioning and my cursor spins it's little processing circle when it is over the page).  I can't even close the page without using the option from the task bar and sometimes that fails so I have to use the task manager to close the page.  Anyone else have this problem?

    Satellite A135-S4477 
    These two drivers should work for your Windows 7. Although they carry the same version and date, they are different files with different sizes. Try them both.
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
    -Jerry

  • Dv7-1264nr sound driver issue for using directtc2pc

    I just installed directtv2pc and am unable to use it to view video on demand dowloads on the dvr. The error message I receive says the video's audio is protected content and to please update my sound driver. Researching the direct tv forums shows that I need a sound driver that is hdcp compliant. However the latest driver available on the download list for this model is the one that is currently installed on this pc. Does anyone have any idea on an optional driver I can use?

    Just got off the online support line with HP.  They have resolved my issue.  I had to disable the docking audio driver.  Here is the info:
    TECH : Larry, right click on the speaker icon on the taskbar and select playback.
    TECH : It will open the sound properties window.
    TECH : Let me know when you are in the sound properties window.
    CLIENT : done
    TECH : Under the playback devices may I know which devices are listed.
    CLIENT : Speakers and Dual Headphones=IDT High Definition Audio CODEC (Default) 2. Independent Dual Headphones (not plugged in) 3. SPDIF (Digital Out via HP Dock) IDT High Def (ready).
    TECH : Right click on 'SPDIF (Digital Out via HP Dock) IDT High Def (ready)' and disable it.
    Disabling this digital audio in the (audio playback devices) resolved my issue.  Hope this helps others...

  • Windows 7 sound driver required for hp pavalian dv2000

    I am not getting the hp pavalian dv 2000 cto notebook pc driver for windows 7 64 bit

    Read the upgrade to Windows 7 for dv2000 thread for your answers.
    Always use the search function to see if your question has already been asked and  answered. It will save time.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Sound Driver needed for HP Pavilion zv6000

    I've got a french laptop with french OS which has been reinstalled with english OS.
    Where can I find the sound drivers and mass storage driver?
    Thanks,
    Adam

    "Support & Drivers" button at top of this page will take you there:
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&dlc=en&cc=us&lang=en&product=453185
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • No sound driver found for windows 7

    plssend  link

    Hi:
    Use the Vista 32 or 64 bit driver from your notebook's support and driver page.
    It should work.
    Paul

  • NVIDIA Releases Fix For Dangerous Display Driver Exploit

    Graphics card maker NVIDIA on Saturday quietly released a driver update (version 310.90) that fixes a recently-uncovered security vulnerability in the NVIDIA Display Driver service (nvvsvc.exe).
    The vulnerability, disclosed on Christmas day by Peter Winter-Smith, a researcher from the U.K., allows an attacker to gain super-user access to any system running the vulnerable driver software.
    Details: http://www.securityweek.com/nvidia-releases-fix-dangerous-display-driver-exploit
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

    Got this too. interested in answer.

  • Driver update for Win 7 USB issue on nVidia chipset systems now available

    This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

    The update is not part of the desktop Win7 update disc from MS or HP  - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January).   It was available too late to get it out on HP Update before the holiday break.  I don't believe there have been any rolls to the Win7 upgrade disks.   I do recommend (while still on Vista) running HP Update and installing all applicable updates  - PRIOR to doing the Win7 upgrade.  Also - I'd double check the drivers page for your system for any Vista updates as well,  best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process.  I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
    As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached .  Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
    Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot.    I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
    Happy Holidays...
    -DM (an HP employee, but the time and comments here are my own, not my employers)
    -DM (HP Retiree)
    NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
    If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

  • Fix for video tearing ATI Radeon HD 4200 using Catalyst Driver??

    Hey guys, as the title asks, is there a fix for pretty serious video tearing that I am experiencing on my ATI Radeon HD 4200 video card? I'm using the proprietary driver (catalyst, built from AUR) and would prefer to use that one or, if need be, radeonhd driver as I need HDMI sound output.
    Below is my xorg.conf.
    Many many thanks in advance to anyone who may have some ideas/experience with this.
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "glx"
    Load "dri"
    Load "drm"
    EndSection
    Section "ServerFlags"
    Option "Xinerama" "off"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    # Driver "radeonhd"
    BusID "PCI:1:5:0"
    Option "Audio" "on"
    Option "HDMI" "all"
    Option "AccelMethod" "exa" # to enable 2D and Xv acceleration on R6xx/R7xx - default AccelMethod shadowfb
    Option "DRI" "on" # to enable 2D and Xv acceleration on R6xx/R7xx - default DRI disabled
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection

    FIXED - Bad file from ATI Radeon - Use windows/ hp drivers- Cat control center not updated nor used,? thats why I could not see/ control dual monitors. This 4200 series is probaly on its way out.
    I had to pay to get it fixed.  Do NOT Update using the update from ATI Readeon?  It did not work for me.
    Hope that might help someone.  
    Bye

  • Fix for Envy TouchSmart 15-j078ca (or any other laptop) sound not working

    If you are having problems with the sound on your Envy 15 laptop (speaker/headphone jack not working), there is a straightforward way to fix your problems.
    First go through these simple steps (they could very well save you some time if they work):
    1) Update your drivers! Seriously, this is one of the top fixes for problems on PCs. If you haven't updated your drivers, search for "Check for Updates" and click that result (you can search using the Charm; the result will be under settings). If you have, read on.
    2) Check to see if your audio device is enabled. On your desktop, right-click the Speakers icon and go to Playback devices. Set audio devices to default (like headsets and speakers) on by rightclicking them and selecting "Set as default". This way, they will work when plugged in, and when taken out, the system will default to other available sound sources.
    If your chosen device is not present, right click in the open space and check "Show Disabled Devices". Now, you can rightclick a device and Enable it, then going through the same process as above to set them as default.
    3) If your devices are enabled and plugged in, try the Windows Troubleshooter. Press the Windows key to bring up the Windows 8 interface (or the Start Menu in Win7) and type "Troubleshooting". Select it from the Settings section on the right side, then go to "Troubleshoot audio playback" under Hardware and Sound. Run the troubleshooter
    If none of these methods work, follow the instructions in this excellent post, but use the changes below:
    1) Use the audio driver specifically for this laptop model (or the driver that works for your model. Enter your product name under Drivers and Downloads on this page if you are American, or this page if you are Canadian. The driver will be under Audio). 
    2) Remove both the AC adapter and  the battery before performing the hard reset, then hold down only the power button for 15 seconds (or follow the instructions here if the battery is fixed in place).
    3) Press Escape repeatedly on boot-up until you get the option to use the BIOS menu.
    Hopefully this helps, I know it helped me! Remember to give Kudos to the post linked if it helped you.

    Thank you for visiting the HP Support Forums and Welcome.Thank you for the detailed information very very helpful. I have looked into your issue about your HP ENVY TouchSmart 15-j078ca  Notebook and the popping sound or crackling noises.
    Here is a document on troubleshooting sound.
    Please make sure your updates have been done on the Notebook. In the device manager under sound right click and update the driver. Here is another step to try.
    1. Right click the Speaker icon in the bottom right corner by your time.
    2. Click Playback Devices.
    3. Click Speakers/Headphones.
    4. Click Properties.
    5. Click the Advanced tab on the Properties window.
    6. Change the Default Format drop-down to the highest quality.
    7. Apply the properties.
    8. Click OK to close the properties window.
    9. Click OK to close the Playback Devices.
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Is there a good fix for iTunes crashing on start up on the itunes store for Windows 8.1 tried the ones on here bust still get display driver problems

    I recently purchased a new PC and it came with Windows 8.1 and tried to install itunes as i had it installed on windows Vista and XP but for some reason now on windows 8.1 every time I open itunes is takes me to the take a tour page of the new itunes and when i try to go to the itunes store it allows me to brows for like 30 seconds before i get the Error Display Driver.

    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Do you have dual graphics adapters?
    Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
    IF YES, read below
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  • Any fix for X-FI screech of death? *sound clip included for downlo

    http://members.cox.net/arfett/lamexfi.wav
    You can listen to it for yourself. Happens in certain games like conflict global storm if you turn the music all the way down. That clip happens to be from FEAR Extraction Point in which it happens throughout 90% or more of the game which makes it really no fun to play at all. The only thing that "stops" it is going into the bullet time which is only a temporary fix as it just starts right after leaving bullet time. It's happened in a few other games just temporarily or in certain situations on both of the X-FI xtreme music card's I've had. I never have the same computer for more than 6 months as parts are switched out with upgrades on a monthly basis and on numerous Nvidia chipsets from nforce 3/4 and nforce 570 it always happens. I format for one reason or another every 3 weeks or so and every time I always download the latest graphics/chipset/sound/anything drivers for every piece of hardware I have so I've had this problem across at least the last 20 versions of drivers for everything I have so I know for a fact it's these **bleep** sound cards. On every single board I've had since experiencing this problem for the first time I even tried every pci slot on my motherboard every time with no success fixing the issue.
    For those interested my current setup which is soon to be once again 00% overhauled (which I'm sure won't fix the problem) is an AMD 5200+, Abit KN9 Ultra nforce 570 motherboard, 8800 GTS and X-FI xtreme music.
    Is there any fix for this or is creative aware of this problem and allow us to send them the card for one without this defect? I know I've read in the past other people were having the issue but it didn't bother me enough at the time to do anything about it.Message Edited by arfett on 08-29-20070:44 PM
    Message Edited by arfett on 08-29-20070:45 PM

    It does it in game mode or entertainment mode. In 2 weeks I'll be on an Asus P5K motherboard with a Q6600. I know deep down I'm still going to have this problem, but part of me has hope it just might do the trick.
    After some further troubleshooting I found a way to get rid of the screech in Extraction Point. If the music slider is set about 5 or 6 notches from maximum it won't screech. any higher or lower and it screeches. In conflict Global Storm it was caused by turning the music completely off so it seems it's some form of incompatibility with music volume in games. It's done it on both of my xtreme music's (I bought a 2nd one because I thought I must have just bought a defecti've card) so I think I might try one of those Auzentech X-FI cards and see if I have any better luck since they actually put quality components around the X-FI chip, unlike Creative.Message Edited by arfett on 08-3-200703:4 AM

  • AME CS5.5 Hanging at 75% & Drive Update for NVIDIA GeForce GTX-470

    Hello,
    I am having problems with AME CS5.5 hanging as well.  I was wondering if somone from Adobe can tell me if the latest Driver upgrade for my NVIDIA GeForce GTX 470 card of 285.62 is safe/recomended for Adobe CS5.5 Premiere/AME/Encore/After Effects programs.  I do not want to cause any additional issues with my Adobe related issues.  My present driver is 280.26...Thanks, Steve

    I installed the update after creating a restore point.
    I guess it's safe, but the behavior is the same.  I still have the hanging issue.
    I hope that this bug gets fixed soon.,

  • MOVED: Cant load networking driver for neo 2 plat

    This topic has been moved to AMD64 nVidia Based board.
    Cant load networking driver for neo 2 plat

    1. Put your Windows CD in the drive.
    2. Select Install Windows.
    3. Let install continue.
    4. After the first restart, you will see something about Recovery Console.  Do NOT select this option.  Just let setup continue.
    5. You will soon see a message "searching for existing Windows installation".
    6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
    7. Select REPAIR.
    8. Just keep going.
    That's it.  Hopefully things will be just fine after the repair is done.

  • P43 Neo alternative onboard sound driver

    Hello again, after a long period of time!
    Can anyone help me with an alternative onboard sound driver for my MSI P43 Neo? It has the Realtek ALC888 implementation and now I use the last MSI driver, from the site. I want something more customizable, for example a full customizable equalizer, not only presets. (Vista x64 and Win7 x64, please)
    Thanks in advance.

    Jack, I know precisely what we are talking about, but I preffere a customizable equalizer in the driver. And I'm not a PC music freak. I have other devices for listening the music. Anyway, the ALC888 on stereo is not so bad how certain people says. It is decent enough.
    Henry, no, I don't have that screen. I have this:

Maybe you are looking for

  • Transferring iWeb to Network Solutions?

    To transfer iWeb published folder on my desktop to NS is a nightmare. Is there any software for transfering iweb to a domain name company that would be easier to use?

  • Setting IPs in linux VMs

    Hello. I'm having the following problem.I want to set the IPs of a linux(centos 6.4) vm but i can't. I have  a)installed the 3.4 integration services b)used kernel 3.12.5 with hyper-v support. In both cases i always get in dmesg hv_utils: KVP: IP inj

  • DNS record with 2 IPs

    I am running a DNS server on a 10.6.6 box and want to add a 2nd IP to a DNS record on the LAN. The reason being is that I backup clients to a PresSTORE server onto tape. Some laptops are not always connected by ethernet so it would be handy to "drop

  • EA1: Export types leaves / at end of line.

    (Colleague using toad asked is there any way to generate ddl for all the types in a schema... ;-)) The generate file has the execute / at the end of some lines. --  DDL for Type terminationEvent175_COLL   CREATE OR REPLACE TYPE "terminationEvent175_C

  • I have single App (year subscription) Premiere pro. Audio Import Question

    Can I not import my own MP3's to put over my videos with this subscription? I appreciate any assistance that you may be able to provide me on this.