NVidia VGA driver dosen't work !!!!

Installed NVidia graphics driver and it dosen't work .

Need this to verify what video it has for right driver??
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Nvidia vga driver, required files are missing

During installation of the nvidia vga driver in checking system compatibility stage it gives a message: installer cannot continue, required files are missing. The driver worked successfully on this same mashine with the same OS (Windows7). Now it is happening after fresh install of win7 with intel vga driver preinstalled. What is wrong this time?

hi mike12362,
May I know what's the model of your lenovo PC (eg. Ideapad Y50-70 Touch) and the version of the video driver that you're trying to install (eg. GeForce 340.52 Driver).
In addition, if you have a system with dual GPU (eg. Intel+Nvidia), this uses the Nvidia Optimus Technology, thus, you will need to install the Intel Driver first, followed by the Nvidia Driver (these are custom drivers which can be obtained from the lenovo drivers page).
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Equium L20-198 drive dosen't work - I/O Device Error

HI I HOOPE SOMEONE WILL HELP ME
I HAVE THIS NOTEBOOK FOR 6 MONTHS
EVERYTHING WAS OK TILL NOW, MY DVD DRIVE DOESN'T WORK AND I CAN SEE A MESSAGE
'THE REQUEST COULD NOT BE PERFORMED BECAUSE OF AN I/O DEVICE ERROR
HELP PLEASE

Hi
Well, it seems that drive has a malfunction.
You can try to boot from the recovery CD and try to install the OS again. Maybe it helps.
If not so I would recommend contacting the Toshiba service partner in your country.
It sounds like you notebook is covered by warranty so I think all replacements will be done for free.

My cd drive dosen't work

so basically what happens is, that i put a cd in, it takes the cd i can hear some noises, then it makes a buzzing type of noise. then pauses, makes the buzzing noise again, then pauses and makes the buzzing noise for the third time and then spits the cd out. no screen pops up saying any error or anything. i've tryed multiple cds, and even a brand new one, none of them work, they all have had the same results. it used to play cds right away when i got it, it played like a total of 4 cds and now it dosen't play any. so any light u can shine on this dark situation will be much appreciates.

Hello!
I have one of the original MacBook Pros. My optical drive has been choosy from the beginning. 10 CD's or DVD's will work fine and then the next one won't work. I've put up with it until today when I unwrapped a brand new CD and my drive spun it up 2 or 3 times and then spit it out. I've checked and there doesn't seem to be a fix other than to take it in to an Apple Store or an Apple authorized repair center and have them swap out the optical drive.
It seems that this is a very common problem among those of us who bought some of the first MacBook Pros. So common, in fact, that I think Apple (or Matsushita) should perform a recall on all these drives.
I drove an hour and a half to my nearest Apple Store only to find out it would take 5-7 days for it to be repaired. Since it is my work machine, I can't be without it for that long.
Hey Apple! Why don't you take care of us "early adopters" who believe in your product enough to buy the first generation. It is obvious that this is a widespread problem. There was another guy at the Apple store in Atlanta tonight with the exact same problem with his MacBook Pro. I've been an Apple user for 15+ years and this is the first machine I've had problems with. And this is the second problem I've had with this machine! My original battery died before there was a recall. My warranty had expired so I bought my first Apple Care warranty and now I'm glad I did.

[Solved]Xorg-server and nvidia binary driver don't work

See topic. When updating to xf86-input-evdev-2.8.2-2 xf86-input-joystick-1.6.2-3 xf86-input-keyboard-1.8.0-2 xf86-input-mouse-1.9.0-2 and xorg-server-1.15.0-1 X won't start and 'systemctl status kdm.service' states that the X server has died. According to Phoronix this should not happen.
Harvey
Last edited by Harey (2014-01-14 11:06:53)

The ABI check is there for a purpose:
[ 38.018] Loading extension NV-GLX
[ 38.027] (EE)
[ 38.027] (EE) Backtrace:
[ 38.029] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x5834c8]
[ 38.029] (EE) 1: /usr/bin/X (0x400000+0x1871a9) [0x5871a9]
[ 38.029] (EE) 2: /usr/lib/libpthread.so.0 (0x7ff70edbf000+0xf870) [0x7ff70edce870]
[ 38.029] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7ff708c51000+0x4e427f) [0x7ff70913527f]
[ 38.029] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7ff708c51000+0x4eb501) [0x7ff70913c501]
[ 38.029] (EE) 5: /usr/bin/X (AddScreen+0x71) [0x435c81]
[ 38.029] (EE) 6: /usr/bin/X (InitOutput+0x3df) [0x4769df]
[ 38.029] (EE) 7: /usr/bin/X (0x400000+0x3961b) [0x43961b]
[ 38.029] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7ff70dc35b05]
[ 38.029] (EE) 9: /usr/bin/X (0x400000+0x24dae) [0x424dae]
[ 38.029] (EE)
[ 38.029] (EE) Segmentation fault at address 0x18
[ 38.029] (EE)
Fatal server error:
[ 38.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
Seems we have to wait for nvidia to include xorg-server 1.15 into their driver
Harvey

##SOLVED## VGA driver install crash. Ive tried everything!

Here are the system specs.
K8N Master 2 FAR (original bios)
2 X Opteron 246
1 x 1gb DIMM Legend ECC REG DDR 400
Enermax liberty 600watt
2 Hitachi deskstar 8mb cache sata 120gb
Tried graphics cards
7600gs PCI-E
7200 PCI-E
Now the issue I am having is the nvidia vga driver installer crashing. The screen flickers a few times (normal) then goes black for approx 2 minutes until a BSOD. Upon rebooting windows loads until a blank screen with cursor and then back to the BSOD. Booting into safe mode and removing the drivers allows windows to boot correctly but whatever I do I cant get the drivers to go!!!!
I have tried fresh installs of XP pro (sp1, sp2, sp3 beta) as well as server 2003 enterprise. I have also tried the two different vga cards along with three different driver releases. I have also tried both PCI-E slots. I have also tried installing under safe mode, same BSOD. If I had a PCI-E ATI card it would be a valuable diagnostic tool but unfortunately I do not so; have to try and eliminate the problem without it.
The weirdest part of the issue is that when the system was last used approx 8 months ago (I have been overseas) things were fine. Same exact hardware.... Any suggestion for things to try will be greatly appreciated because although a couple of years old now this is still a hell of a good system and I am most certainly not ready to give up on it.
I am downloading the latest mobo bios now and will update this post with my results. I am however not hopeful the the bios is the answer.

Thanks for the advise Bas. I had in fact tried memtest. Another thing I forgot to mention.
Anyhow I downloaded the latest nforce and forceware drivers last night and this morning (dial-up) and updated the BIOS (using the very handy thumb drive tool from these forums) to 1.42. Did a clean TinyXP SP2 install, installed the drivers and... no prob's at all. I'm not sure if it was the BIOS (I doubt it), the new nforce or the new forceware version but something worked. Its happily been running a simultaneous sisoft sandra and 3dmark 07 loop (crawling obviously but I wanted max stress) for the whole of the afternoon while Ive been out sailing with no prob's at all.
All I can say is thanks and see ya' round. I'm planning on modding' some large passive P4 coolers to fit the board; I know its going to be a job and a half but as I'm running a passive vid' card and whisper quiet power supply )dual rail Enermax... none of the common prob's associated thankfully) and drives I figure its worth it. I have the better (it would seem) revision of the board with the identical copper coolers (not the funky mismatched pair) and had considered new fans (70>80mm adapters included) but figure I may as well got the whole hog. Out of interest is there a forum post/site anyone knows of where people have submitted there results with various coolers?
I will post results here to help others anyhow when I have achieved something worth sharing.

MAINBOARD DRIVERS: NVIDIA nForce VGA Driver

i was checking live update 2 and this result came up under mainboard drivers. NVIDIA nForce VGA Driver
NVIDIA nForce VGA Driver
My Current Ver. 4114 Online Ver. 4243
Update (14.52MB )
is it advisable to go to this driver or just stick to the one i have?

it works fine, but didnt really notice in any differences.
the score in 3dmark just went down like 10 pts or so

NVidia released a new driver for Qosmio nVidia VGA Cards

Hello
This is the latest and the official driver from nVidia, Works for all Qosmio models with nVidia VGA Card
Vista:
http://www.nvidia.com/object/geforce_notebook_winvista_179.48_beta.html
XP:
http://www.nvidia.com/object/geforce_notebook_winxp_179.48_beta.html
Enjoy

Hello Markus77
Nvidia decided to release notebook drivers and add a section for that in their download page, the drivers are good for gamers who want to play games in their laptop and want the latest bug fixed drivers.
The good about this one is that it is official from nivida and not tweaked or modified like the others.
Regards'

Nvidia driver won't work

I can't seem to get my graphics card to work. It is a GeForce 5500 and is supposed to work with the regular nvidia driver. I have also tried using the nvidia-96xx driver with the same results. I am using the VESA driver right now
this is the error that i get:
could not open '/lib/modules/2.6.24-ARCH/kernel/drivers/video/nvidia.ko
No such file or directory
NVIDIA: faled to load the NVIDIA kernel module
Screen(s) found, but none have a usable configuration
It was working a few days ago until an -Syu when the kernel was upgraded. I messed with it for quite some time and decided to just reinstall arch and start fresh (I had been meaning to for a while anyway) but the problem persists on the new install too.
I don't know what to do, any ideas?
thanks

Have you had a look in '/lib/modules/2.6.24-ARCH/kernel/drivers/video/' to see if the driver is actually there ?
The thing I would do in this case ( and I'm a notorious ass**** ! ) is logout, do a Console login, as root run
'xorgconfig', re-install the Nvidia driver (It'll bitch about it already being installed, just go ahead...) then reboot.
WARNING: if you run 'xorgconfig' it'll require your monitors horizontal and vertical scanning frequencies. If you don't know them you may be able to Google for them.
After any kernel upgrade / downgrade the Nvidia driver will require re-installation.
Hope this helps...
Deej

865pe neo2-s vga driver of website does not work

Hello I have an old build i gave to my mother whos needed it wiped now. Don't have the disc anymore so I've gone onto the website and downloaded Intel 845/865 G/GL/GE/GV VGA Driver ver. 6.14.10.3943 and whenever I try to run the setup i get "this system does meet the minimum requirements for installing this software"
please help ive been at this forever and I can't seem to get it working. thanks in advance

Lets start off the right way. You have more than a MB in that PC please tell us what it's made of. What OS, Win. XP? If so what SP, 1, 2 or 3?
"gave to my mother whos needed it wiped now."
What exactly do you mean by that? What did you do? We're not mind readers and we need to know what you have and what you did to have any clue of what to say to help you.
>> Posting Guide <<

Getting nVidia 71xx driver to work.

I spent much of last night installing and setting up Arch Linux. During the installation, I attempted to install the "nvidia-71xx" driver so I could make use of my Riva TNT2 card. However, I met with a problem during the configuration: nvidia-xconfig was not present. So, how do I go about installing and configuring nvidia-71xx now?

I managed to get nvidia-71xx installed, and I manually configured xorg.conf. But now, ksplash is crashing whenever I log in. Running "glxinfo" in the command line reveals this:
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x22 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x23 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x24 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x25 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x26 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x27 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x28 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x29 24 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2a 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2b 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2c 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2d 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2e 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x2f 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x30 24 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x61 32 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Segmentation fault
I recall having a similar problem on Fedora. It had something to do with compositing, I think. Here's the contents of my /etc/X11/xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
# Load "GLcore"
Load "record"
Load "xtrap"
# Load "dri"
Load "dbe"
Load "ddc"
Load "extmod"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
ModelName "DELL P780"
HorizSync 30.0 - 85.0
VertRefresh 48.0 - 120.0
DisplaySize 370 270
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV4 [RIVA TNT]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection
EndSection

Xorg fails to restart with nvidia propertiary driver

Hi!
Dear fellow archers, I've got this little problem which is driving me crazy: after first successful start of xorg while booting ("kdm" is in the DAEMONS list in rc.conf), i can't get to start it once again (for example with "/etc/rc.d/kdm restart"). When I try to do this screen goes blank (+ single underscore in top-left corner) for ~10 seconds, then nvidia logo shows up for half a second, and finally it failbacks to terminal.
I use thinkpad T61 with nvidia quadro nvs 140m and nvidia driver version 190.42 (from extra repo).
Thanks in advance for all suggestions.
Xorg.0.log after I try to restart
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux hal9000 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/sda2 ro vga=869
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 13 16:10:30 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 nVidia Corporation Quadro NVS 140M rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.42 Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 190.42 Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "Coolbits" "1"
(**) NVIDIA(0): Option "DPI" "96 x 96"
(**) NVIDIA(0): Option "DamageEvents" "True"
(**) NVIDIA(0): Option "OnDemandVBlankInterrupts" "True"
(**) Dec 13 16:10:30 NVIDIA(0): Enabling RENDER acceleration
(II) Dec 13 16:10:30 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Dec 13 16:10:30 NVIDIA(0): enabled.
(II) Dec 13 16:10:43 NVIDIA(0): NVIDIA GPU Quadro NVS 140M (G86) at PCI:1:0:0 (GPU-0)
(--) Dec 13 16:10:43 NVIDIA(0): Memory: 524288 kBytes
(--) Dec 13 16:10:43 NVIDIA(0): VideoBIOS: 60.86.3e.00.00
(II) Dec 13 16:10:43 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Dec 13 16:10:43 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Dec 13 16:10:43 NVIDIA(0): Connected display device(s) on Quadro NVS 140M at PCI:1:0:0:
(--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0)
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0)
(--) Dec 13 16:10:43 NVIDIA(0): BenQ FP91GP (CRT-0): 400.0 MHz maximum pixel clock
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): 330.0 MHz maximum pixel clock
(--) Dec 13 16:10:43 NVIDIA(0): LEN (DFP-0): Internal Dual Link LVDS
(WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
(WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
(WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
(WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
(WW) Dec 13 16:10:43 NVIDIA(0): The EDID for LEN (DFP-0) contradicts itself: mode "1440x900"
(WW) Dec 13 16:10:43 NVIDIA(0): is specified in the EDID; however, the EDID's valid
(WW) Dec 13 16:10:43 NVIDIA(0): HorizSync range (46.301-55.556 kHz) would exclude this
(WW) Dec 13 16:10:43 NVIDIA(0): mode's HorizSync (37.0 kHz); ignoring HorizSync check for
(WW) Dec 13 16:10:43 NVIDIA(0): mode "1440x900".
(II) Dec 13 16:10:43 NVIDIA(0): Assigned Display Device: DFP-0
(II) Dec 13 16:10:43 NVIDIA(0): Validated modes:
(II) Dec 13 16:10:43 NVIDIA(0): "1440x900"
(II) Dec 13 16:10:43 NVIDIA(0): "1024x768"
(II) Dec 13 16:10:43 NVIDIA(0): "800x600"
(II) Dec 13 16:10:43 NVIDIA(0): "640x480"
(II) Dec 13 16:10:43 NVIDIA(0): Virtual screen size determined to be 1440 x 900
(**) Dec 13 16:10:44 NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
(==) Dec 13 16:10:44 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Dec 13 16:10:44 NVIDIA(0): Initialized GPU GART.
(II) Dec 13 16:10:44 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Dec 13 16:10:44 NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) Dec 13 16:10:44 NVIDIA(0): Setting mode "1440x900"
(II) Loading extension NV-GLX
(II) Dec 13 16:10:45 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Dec 13 16:10:45 NVIDIA(0): Initialized X Rendering Acceleration
(**) NVIDIA(0): Option "BackingStore" "True"
(**) NVIDIA(0): Backing store enabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
#InputDevice "Ultranav" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "ServerFlags"
# Option "AutoAddDevices" "False"
#EndSection
#Section "Files"
# RgbPath "/usr/share/X11/rgb"
# ModulePath "/usr/lib/xorg/modules"
# FontPath "/usr/share/fonts/misc"
# FontPath "/usr/share/fonts/100dpi:unscaled"
# FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
#EndSection
Section "Module"
Load "glx"
Load "dri"
# Load "vbe"
# Load "ddc"
# Load "int10"
# Load "dbe"
# Load "extmod"
#Load "record"
# Load "freetype"
#Load "type1"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "thinkpad60"
Option "XkbLayout" "pl"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "Auto"
# Option "XAxisMapping" "6 7"
# Option "YAxisMapping" "4 5"
Option "ZAxisMapping" "4 5 6 7"
# przewijanie srodkowym przyciskiem
# Option "EmulateWheel" "On"
# Option "Emulate3Buttons" "On"
# Option "EmulateWheelButton" "2"
## Option "EmulateWheelTimeout" "200"
EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "SHMConfig" "on"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "InputDevice"
Identifier "Ultranav"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Lenovo"
ModelName "Lenovo T61 Flat Panel 1440x900"
Option "DPMS"
# DisplaySize 487 304 # 75 DPI @ 1440x900
# DisplaySize 381 238 # 96 DPI @ 1440x900
# HorizSync 28.0 - 61.0
# VertRefresh 43.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Quadro NVS 140M"
Option "DPI" "96 x 96"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "DPMS" "True"
Option "OnDemandVBlankInterrupts" "True"
Option "Coolbits" "1"
# Option "IgnoreDisplayDevices" "DFP, CRT, TV"
# BusID "PCI:1:0:0"
# Option "UseEdidDpi" "FALSE"
# Option "AddARGBGLXVisuals" "True"
# Option "AllowGLXWithComposite" "True"
# Option "TripleBuffer" "True"
# Option "DamageEvents" "True"
# Option "BackingStore" "True"
# Option "InitialPixmapPlacement" "3"
# Option "GlyphCache" "1"
# Option "PixmapCacheSize" "200000"
# on battery - max power saving, on AC - adaptive strategy
# Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2233; PowerMizerDefault=0x3"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 1
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
#Section "Extensions"
# Option "Composite" "Enable"
#EndSection
#Section "DRI"
#Mode 0666
#EndSection
Last edited by tarantoga (2009-12-13 15:36:59)

tarantoga wrote:
falconindy wrote:
I don't think the 190 driver is intended for the quadro M series. As per the nvidia site, the 100 or 169 drivers support your video card.
edit: You might also try the nouveau driver.
Well, this quadro is almost identical to geforce 8400GS, so I don't think nvidia site is up to date in this respect. Besides, other than this issue everything works just fine. It is just annoying to be forced to reboot everytime I have to restart X. And I need nvidia propertiary driver, because I use opencl.
Thats odd then. I have an 8400gs and am using the beta driver without any issues. Give the legacy driver a try once.
Exit the gui (ctrl+alt+f1)
Remove the current driver
pacman -Rd nvidia nvidia-utils
(replace with nvidia-beta nvidia-utils-beta if you switched to the beta driver)
Now install the legacy driver
pacman -S nvidia-173xx nvidia-173xx-utils
Reboot
Hope this helps.

Know about vga driver

sir,
i hv purchased hp-d009tu laptop.
i hv installed windows 7 32 bit, i need VGA driver to make webcam active, i hv downloaded so many drivers but none of them worked.
plz give me correct VGA DRIVER for the same...
thnx.

Hi prateeek, welcome to the HP Forums. Unfortunately HP does no offer 32 bit drivers for your notebook. Windows 7 and 8 64 bit are available on the download page for your notebook: HP 14-d009tu Notebook PC Drivers
What if I Don't See My Operating System?
You can try Intel and NVidia for drivers, but since they weren't designed specifically for this notebook they will probably not work properly.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Need a VGA driver for lenovo 3000 H100 5310-2AA.. pls need some help here..

Hi,
is anyone of u have the installer for the VGA driver ( for lenovo 3000 H100 5310-2AA) ??
or if u know where to download it pls tell me..
I tried download from the lenovo's official website but it didn't work, I dunno why?
it says "the nvidia setup program couldn't located any driver that are compatible with your current hardware. Setup will now exit"
I confuse now.. I didn't upgrade or change any hardware since I bought it..
thx

you seem to install Nvdia when you must have been using intel's drivers.
check out this link once
http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=121202&template=/productpage/la...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

NVidia Capture Driver VS Leadtek TV Tuner problem

I previously have used Leadtek WInfast TV Tuner 2000/XP before I installed MSI Geforce4MX 460-VTP with VIVO.
I never installed the capture driver for the Geforce card though, because I do not see the need. Besides I prefer to use the tv tuner to record my tv programs.
Another reason why I didn't install the NVidia capture driver is because I realize that it will cause some conflicts with the Leadtek TVTUner card driver because both are actually installing the same device drivers for the same tv-chip hardware located on both card.
NVidia Capture Driver will install these hardwares in Device Manager:
- Nvidia WDM Audio Capture
- Nvidia WDM Crossbar
- Nvidia WDM TVTuner
- NVidia WDM Video Capture
while, the Leadtek TVTUner driver will install the same driver for its own hardwares:
- Winfast TV2000-XP Audio Capture
- Winfast TV2000-XP Crossbar
- Winfast TV2000-XP TVTuner
- Winfast TV2000-XP Video Capture
Surely installing Nvidia Capture driver & Leadtek TV TUner driver will cause WinXP confused because it finds 2 sets of the same hardwares.
As I previously explained, I currently didn't install the Nvidia Capture Driver, and relies mainly on the Leadtek TVTuner to watch tv programs. The problem is when I tried to use some recording softwares like TVTools, these softwares will only find the NVidia TV Tuner hardware instead of my Leadtek TV Tuner.
How could I solve this problem ?
Is there any way to make both hardwares (Leadtek tv tuner & NVidia capture driver) work together ?

It's got to be either a configuration issue or an incompatability with hardware because I have installed several of those cards on friends and client PC's without a single problem. I will say they all had nVidia VGA cards and either the nvidia or via chipset. I also have one and I can't find a better card for the $ and the ease of use, nice clean straight forward GUI and stability.
Have you tried the latest drivers and PVS from leadtek's website?
This thread should be in the VGA forum with a link here just in case a user with your mobo has this card.
It's not in a shared slot is it? Have you looked for IRQ conflicts? Try removing the bluetooth and modem temporarily so you only have that one TV card, then check the IRQ's. If you have to move the card to another slot. The best slots are the second and third one down from the top (where the AGP slot is) and not the first and the last slot. Try operation then. Does this fix the problem? If so then you have to find the best slots for the BT and the modem.
Good luck.

NVidia VGA driver dosen't work !!!!

Similar Messages

Maybe you are looking for