Nview with IGP and AGP-Card?

Hello!
I have a K7N2G-ILSR and I would like to use the Integrated Graphics together with an AGP-Card.
Is that possible?
I found nothing in my BIOS to reactivate the IGP after installing the AGP-Card. But it would be such nice to use nview just with IGP and a simple AGP-Card.
Tnx, Qnt

Quote
Originally posted by Qnt
Hello!
I have a K7N2G-ILSR and I would like to use the Integrated Graphics together with an AGP-Card.
Is that possible?
I found nothing in my BIOS to reactivate the IGP after installing the AGP-Card. But it would be such nice to use nview just with IGP and a simple AGP-Card.
Tnx, Qnt
You can't use the onboard AGP along with an add-on AGP card. Only one card can ride the AGP bus at a time. WHat you'll need is either a PCI card to use with the onboard AGP, or an add-on AGP card that will do twin output. Many will using the VGA port and the DVI port (with an adapter of course).

Similar Messages

I have a airport base station, will it work with netgear and linksys cards?

So I am at a hous ethat is using a low end netgear router to wirlessly serve about 4 computers. I am the only Mac in the house and suggested they a Airport Base, will their linksys and netgear wireless cards work with the airport Base or should they just upgrade to a high end linksys router?

Hi Chris:
Yes, the AEBS is compatable with any 802.11 B/G cards including Netgear and Linksys cards.
I've used many of the wireless routers that are available (Netgear and Linksys) and recently upgraded to an AEBS. I've found you really get what you pay for. I've had little problems with the AEBS and cross compatiability.
I hope this helps!

HT4101 Camera connector kit not working with ipad3. Not at all able to see any photo . Have tried both the USB connector directly with camera and thru card reader. Tried by copying photos to DCIM folder also.

Got a iPad camera connector kit. It is not working as expected. It is not able to read any photos. Both the USB connector and sd card reader arenot showing any photos on iPad. Tried copying all photos directly in DCIM folder. Still no result.
Any other setting needs to be changed?

Hey, thanks for your updates.
The photos are 8 character long and extension is .jpg
The file names are 8 characters long with 3 as alphapet followed by an "_" and then 4 numbers.
Initially the photos were in a folder inside DCIM folder. I manually copied them to DCIM folder, still no result.
Can you advice.

Can't get 4.1 working with ALSA and Intel card

Hello everybody,
My problem is simple, but I cannot find any solution for it.
I have Arch Linux 64 bits installed with ALSA and a Intel onboard sound card
I can get the audio working simply installing ALSA and unmutting the channels, but I get no sound at the rear speakers and the center speaker (subwoofer).
I run:
$ spearker-test -c 5
And all I have is sound at the 2 front speakers.
Looking at alsamixer I only saw configuration for 2,4 and 6 channels. I am currently using the configuration for 4 channels.
I unmuted everything in alsamixer (playback) and nothing changed.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 23704 1
snd_hda_codec_realtek 59331 1
snd_hda_intel 25700 7
snd_hda_codec 97464 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74926 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
snd 60021 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Anyone knows how to make it work? Thanks!

Thanks for the answer, tried this command, here is the output:
$ speaker-test -t wav -c 5 -D surround41
speaker-test 1.0.26
Playback device is surround41
Stream parameters are 48000Hz, S16_LE, 5 channels
WAV file(s)
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Is there something needed to make this command run correctly?

Onboard VGA and AGP card

AS far as I understand, if I install an AGP card, it will automatically disable the onboard vga. Is it possible to have both enabled? I'd like to connect two monitors and use two separate desktops. One possible solution would be to install a dual head card, but the one that I have is a full-size card. So I'd like to use my old half-size ATI AGP card and onboard chip - is it possible?

no, because the onboard agp shares the AGP slot. you cannot use both together

PM8M-V and AGP card

first excuse my very bad english
I bought a PM8M-V mothercard
I want to add an AGP card
I have to modify in the BIOS to desactivate integrated vga card and activate AGP card but I don't know what to do in the bios parameters
because I put agp card and the system reboot always conflict driver I suppose
Help me please ...

It could be a driver problem. It could be something else.
Try entering SafeMode. Uninstall the driver for the onboard card. Uninstall the driver for the AGP card. Enter DeviceManager, and remove all - yes, all - graphics cards. Reboot.
Without installing the driver for the AGP card, do you still have reboots?

Problem with sound and network card

when my mainboard broke down i received other mainboard - 845PE Max - but i didn't get drives to it. Sometimes sound screeched but it worked fine till I reinstall windows. I had to download drives by Live Update, and after i downloaded it all sound screeched allmost every time, especially when i do something (click, close window etc.). It looks that sound work worse when processor is more busy. I tried to reinstall drives, but i didn't change anything. I have 2.1 speaker system, and it worked fine at old mainboard. I have win XP professional SP2, and it doesn't see any problem, and onboard realtek sound. Anyone know what can be a reason??

I did get some disturbing backround noise after updating latest audiodriver for my 865pe v.1 board (C-Media 9739A) ,from Live update.
Tried some different settings, but did not solve the problem, so I installed my
Creative SB Live 5.1 pci-card with latest drivers, instead of going back to old driver - and now I´m happy again and got better sound as well in my 2.1 speakers.
Try to find an older driver and see if problem go away ( pitty you don´t have the original MB CD drivers ) or buy a “cheap” audio pci-card, which probably will give better sound as well compared to on-board.
( you may have to disable on board sound in bios first )

Multi GPU use with Nvidia and Radeon Card combined possible?

I know it's unlikely but does CC support the combined use of Nvidia and AMD graphics cards, mercury engine, cuda / opencl / multi GPU feature wise?
There's a lack of performance currently; especially when color grading. So we're gonna have to upgrade our macpro.
Current Setup:
Mac OS X Lion
3,33GHz 6-Core INTEL Xeon
24GB 1333MHz DDR 3 RAM
ATI Radeon HD 5870
Nvidia Quadro 4000
SSD Raid internal
SATA HDDs external
What's a good / better setup especially for color grading in Premiere (might switch over to SpeedGrade CC soon)?
We're gonna replace the Radeon HD 5870. Should we buy replace it with a NVIDIA Quadro K 5000 or a Radeon 7950 Mac Edition?
Thanks in advance!

Get the K5000 if you need 10bit color preview. If you dont get the 680GTX Mac edition.
Eric
ADK

What's with CS4 and flash cards.

Could we have an update on CS4 and EX1/3 flash cards? Does Premiere CS4 recognize the flash files readily and is it easy to edit or does one need to still go though an intermediate codec to edit this format properly?

EX1/3 flash files? Do you mean the files from the EX1 and EX3? If so, then yes it does...and does so quite well.

Having problems with RT and video card?

I have just upgraded to FCP 5 Studio. I found that my video card was not able to handle the RT Extreme, so I upgraded to a recommended ATI 9600 64 mb video card. However I still do not get any video that plays in the viewer windows. I only get a pixelated screen of the menu bar. I am running two monitors. The second monitor is only 32 mb,but I only use it for the menus part of the program. Do both video cards need to have enough memory to run the video RT? If so, can I unplug the monitor that does not have enough memory and run the program properly? Can I turn off the RT feature? Thanks for your help.

This is the Final Cut Express forum. You should post your question in the Final Cut Pro forum and/or the PowerMac forum.
wrt RT settings in FCE, you can adjust them in FCE System Settings > Playback Control

5.1 surround sound on s5160f with Nvidia and Realtek cards

product_name : HP Pavilion Slimline s5160f Desktop PC
operating system : Microsoft Windows Vista Home Basic 64
The HP guy told me to load this driver
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-69866-1&lc=en&dlc=en&cc=us&...
it didnt' work.
My audio is coming out through the HDMI cable which is from the NVIDIA card. I tried other solutions, including updating the NVIDIA drivers for similar problems. Someone suggested going though SPDIF, but VLC just has an option to use SPDIF when availble, you can't exclusively set it.
How do I get 5.1 surround sound sent through the HDMI connection? I've used VLC and the builtin Blu-Ray player software and I'm running out of ideas.

Is there a way to identify which computer outputs support 5.1 sound? It is a media center PC, but I can't find that information anywhere.

Socket 775 cpu with DDR and AGP

I just noticed this in the socket 775 section:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=623

you need more than a new LGA775 CPU... You need to have a new CPU Cooler too! The Socket-478 CPU Cooler will NOT work with this board.
bejon2000, I think I can answer you regarding the MOSFET for 775 vs 478 boards.
For LGA775, the power requirement is higher since LGA775 CPU is going to have higher speed than the S478 CPU. Thus, the CPU VREG design has to be able to provide higher power for the LGA775 boards compared to S478 boards. This is CPU dependent, it's not socket dependent.
2 phase, 3 phase or 4 phase depends, again, on the CPU to be used. 4 phase would give better thermal efficiency compared to 3-phase, while 2 phase will be running the hottest. However, either 2, 3 or 4 phases, this CPU VREG design is well tuned to the fastest allowable CPU that's expected to work with this board. So, don't worry about it provided you have a good cooling air ventilation on your board.
Anyway, it can be confirmed that 865 Springdale does NOT support EM64T at all. So if you plan to upgrade to 64-bit enabled Pentium 4 CPU, this board will NOT be able to support it.

Oboard Video vs. AGP Card

Aight guys, I just purchased a K7N2G-ILSR motherboard. Now I've never used anything with integrated video before. Basically because I never trusted it, but this seems to be pretty solid. I want some opinions though... Should I use the video that's onboard or should I use a new MSI GeForce4 MX440 8x with 128MB DDR?

Quote
Originally posted by sevich
Aight guys, I just purchased a K7N2G-ILSR motherboard. Now I\'ve never used anything with integrated video before. Basically because I never trusted it, but this seems to be pretty solid. I want some opinions though... Should I use the video that\'s onboard or should I use a new MSI GeForce4 MX440 8x with 128MB DDR?
I agree with everyone else. I also have the same board and for awhile tried to run Quake3 Arena with IGP,,,,,,,ROFLOL
I put a geForce4 ti42000 in it and it's better,,,,way better!!!Plus it freed up a lot of RAM. Almost double of what I allocated for it.I justified getting this board for two reasons.
1) The Soundstorm onboard audio. No investment in a sound card needed in my opinion.
2) I can sell this PC later with IGP and keep my card! That is if I want to sell it!
Try to get one of the Titanium (ti) cards with 8X. I try to stay away from the MX chips.

G4 Sawtooth Processor and Video Card upgrades

Hi there,
I'm heading for a major upgrade on my G4 Sawtooth 500Hz, starting with processor and Video card, not to mention maxing out the RAM slots.
My main applications are Final Cut, After Effects and Photoshop.
I wish I had more money for a dual processor (or even a G5 – sigh!) so I'm looking at the Sonnet Encore/ST G4/1.4GHz Processor versus the PowerLogix G4/1.4GHz 7455A PowerForce55. I've done the benchmark tests at OWC's site and I'm inclined to Sonnet. Anyone have an opinion between these 2, or even if there's another one I should be also considering?
Should I make the effort and go for a dual processor? because of the clear benefits on rendering time (specially for After Effects)?
Video Cards:
These I think I need more help. Going thru these threads I learned that I should consider the power supply (overheating problems) and that "AGP G4's have either a 208w or a 237w Power supply (PSU)" - I have no idea what I got.
On another thread I read: "as far as I'm aware, there are only two video cards currently available retail that support Tiger's core image/video, the Radeon 9600 and 9800. Unfortunately the 9600 requires a x4 AGP slot, so that just leaves the 9800. It's a powerful card but consequently is fairly expensive and can be noisy due to it's fan."
What is a x4 AGP slot? Do Sawtooths have this?
I'll be upgrading to Tiger soon. Does this mean I can't go for the ATI Radeon 9200?
I'd prefer AGP than PCI cards. What are my real options considering power consumption, OS and performance?
Important: I’d like the video card to run 2 monitors, LCD and/or CRT.
Further upgrades would be SATA controller card and one or two internal SATA drives replacing the ones I got.
Last but not least:
Instead of all this fuss, should I 'just' get the MacMini 1.66GHz Intel Core Duo????? and later on get a G5 (or whatever it will be called...)?
PowerMac G4 "Sawtooth" (AGP) 500Mhz, ATI Rage 128Pro, 512MB RAM Mac OS X (10.3.9) Internal ATA drives [25GB - 80GB] / External 160GB

Hi
Video Cards:
These I think I need more help. Going thru these
threads I learned that I should consider the power
supply (overheating problems) and that "AGP G4's
have either a 208w or a 237w Power supply (PSU)"
- I have no idea what I got.
On another thread I read: "as far as I'm aware,
there are only two video cards currently available
retail that support Tiger's core image/video, the
Radeon 9600 and 9800. Unfortunately the 9600 requires
a x4 AGP slot, so that just leaves the 9800. It's a
powerful card but consequently is fairly expensive
and can be noisy due to it's fan."
What is a x4 AGP slot? Do Sawtooths have
this?
I'll be upgrading to Tiger soon. Does this mean I
can't go for the ATI Radeon 9200?
I'd prefer AGP than PCI cards. What are my real
options considering power consumption, OS and
performance?
Important: I’d like the video card to run 2
monitors, LCD and/or CRT.
I think I may have written what you've quoted. You probably already know, but you don't actually need a Core Image compatible card to use Tiger. As far as I'm aware, few applications currently make use of Core Image and fewer still actually require it (Apple's Aperture and Motion being possible exceptions).
As PB PM mentions, you have a x2 AGP slot and unfortunately there's little middle ground in terms of graphics cards available. The main options are the Radeon 9800 at one end (powerful but relatively expensive, power hungry, hot running and noisy) or perhaps the Radeon 9000 at the other. It's no longer available retail but they appear on eBay occasionally. It's an AGP card, was available in 64MB and 128MB versions and can support two monitors. One slight downside is that it has an ADC connector (alongside the VGA connector), which the Sawtooth logic board doesn't support, but I believe you can still connect an ADC to DVI adapter cable to connect a DVI monitor. It doesn't support Core Image either.

J2me and java card, need help to communicate

we are trying to put together a reader to read smartcards using j2me and we figure that it would be easiest if we could develop it to work with java cards rather than standard smart cards, the problem is we get garbage when we communicate to it, the chip sends us crap, any suggestions what might be wrong, any calls we might be missing, has anyone worked with j2me and java cards or smart cards, any help would be appreciated.
einar

.... reader app and the ME behind it .... smells like mobile ....
First of all - if you want to have one mobile application running on this just make sure that whatever is written in ME can use drivers from the reader chip ....
Workin on the PC is something completely different. There was one good example how to develop one host application in Java provided with the JCOP tools long ago ... I don't know if this is now in the new Eclipse tools.
But - there was a small API provided that can give you good hints what to do - and - once you have it on the reader side - you can easily integrate ME methods with this ...

Nview with IGP and AGP-Card?

Similar Messages

Maybe you are looking for