NVision prior year totals are overwriting with current year

Hi All,
I have created an nVision report with two columns, one is for Current year(timespan-YTD) expense totals and other one is for Prev Year(timespan-Prev_Year) totals and row level i have all Expenditure accounts from Account Tree.
When I run the report, Current Year and Prev Year coulumns are displaing same totals, when I ran the SQL trace, i found that Prev Year, column sql was running two times, one is for prev year and otherone is current year and second sql was overwriting with current year totals.
When I looked into timespans for PREV_YEAR, I saw that "End Period Type" was set to "Relative to Current Period", when I swich to"Absoluate Period" then Prev Year column was showing Prev Year results.
But switching Period type to : Absolute is wrong,when comparing the current year with Prev year with As of Date.
Any thoughts on above issue.
Thanks,
Venky

Dear Rachana
The long text of error AA669 is very clear about the root cause of the
error.
The idea behind the message: it is not allowed to close first general
ledger before subleger. This leads to inconsistencies. It is common
accounting principle to always close the subledgers first and only
then close the general ledger (FI-GL).
The solution is: re-open fiscal year in FI-GL (txn OB52) and follow the
steps from note 619969.
o RAAFAR00
o RAPOST2000
o RAPERB2000
o RAJABS00
If it is not possible to open the fiscal year because audit has already
been completed: workaround (which is not quite correct from the legal
point of view) is the report RACORR20_A from note 29694.
Best Regards,
Blaz

Similar Messages

How to compare a Date data with Current Year and Period Member on FIX

Hi experts,
I have a Project dim that each member is a Project (P01, P02...)
and Account dim that stores information of the each Project (Name, Start date, Finished Date...)
Finished Date member is in Date data type
So how can write a IF condition below in order to compare Project Finished Date with Current Year and Period members on FIX
FIX (@Descendants(Projects), Descendants(All Year), Descendants("Year Total")...)
IF (@CURRMBR(Period)->@CURRMBR(Year) < Project->FinishedDate)
Do something...
Else
Do something
Please help me on this. Sorry for my bad grammar. Please ask if there is anything unclear
Many thanks,
Huy Van.
Edited by: Huy Van on Jan 29, 2013 1:14 AM
Edited by: Huy Van on Jan 29, 2013 2:24 AM
Edited by: Huy Van on Jan 29, 2013 2:25 AM
Edited by: Huy Van on Jan 29, 2013 6:04 PM

Here is what I have done. Post for whom may concern later
VAR FM; /* Finished Month of Project*/
VAR FY; /* Finished Year of Project */
VAR CM; /* Capture Current Month on FIX statments */
VAR CY; /* Capture Current Year on FIX statments*/
FIX ( @RELATIVE( "Year", 0), @RELATIVE( "Period", 0), @IDescendants( "Base Projects")....)
FY = @ROUND( "TGHT"->"NA Contract"->"FY06"->"NA Period" / 10000, 0);
FM = @MOD( @ROUND( "TGHT"->"NA Contract"->"FY06"->"NA Period" / 100, 0), 100);
/* For FY13 return 13... */
CY = @JgetDoubleFromString( @CONCATENATE( "20", @SUBSTRING( @NAME( @CURRMBRRANGE( Year, Lev, 0, 0, 0)), 2)));
/* Set CM value based on currrent Period On FIX statement */
IF ( @ISMBR( "Jan"))
CM = 1;
ELSEIF ( @ISMBR( "Feb"))
CM = 2;
ELSEIF ( @ISMBR( "Dec"))
CM = 12;
ENDIF
IF ( CY < FY OR ( CY == FY AND CM < FM))
Do something...
ELSE
Do something...
ENDIF
ENDFIX
Edited by: Huy Van on Feb 19, 2013 11:10 PM
Edited by: Huy Van on Feb 20, 2013 7:46 PM

Previous Years revenue along with current year

Hi,
We have a universe on top of BEX query. I am trying to query it for a particular year and the result should have the queried year revenue and revenue of previous years available.
For example: if I am querying for 2010 the report should have 2010 revenue and 2009/2008/2007/...... revenues.
Any work around to do this?
Thanks,
Vishal

I do not think that a merging at report layer will be feasible because of current MDX restrictions that only allow numerical operations in user defined universe filters. This means that date and string operations are not possible and therefore it is not possible to force the retrieval of the values from the previous year (resp. the user input) since you have to perform operations on date objects (year = user input -1).
My opinion is that you have to create a BEx query that will be able to retrieve both years (actiual and previous) at once.
Regards,
Stratos

Year values are displaying with comma ex: 2,013

Hi,
We are Using OBIEE 11.1.1.7.0 , In the time dimension hierarchy, the year values are displaying in the reports with comma separator i,e., 2,013
I want to remove the Comma in the year value of hierarchy.
Could you please help me anyone to achieve this.
Thanks,
Babu.

unset the set the comma separator for thousand using column properties->Data format and then save it for system wide.
if helps mark
~ http://cool-bi.com

Get date between 1st of current year and 31st Dec of current year

Hello:
I have a query where there is a check on date that has to be between 1 jan curr year and 31 dec curr year. How can I have that since the year component will be changing from year to year?

use the year component of sysdate?
ME_XE?select to_char(sysdate, 'YYYY') from dual;
TO_CHAR(SYSD
2007
1 row selected.
Elapsed: 00:00:00.12
ME_XE?select to_date('01-jan-'||to_char(sysdate, 'YYYY'), 'DD-MON-YYYY') from dual;
TO_DATE('01-JAN-'||TO_CHAR
01-JAN-2007 12 00:00
1 row selected.
Elapsed: 00:00:00.18

0I_CUFYE pulling incorrect year (ie. instead of pulling current year period

Hi ,
Since toady I am facign stragne error..
till yesterday the same query was showing restriction for 001.2010-012.2010
today it is showing 001.2011-012-2011
this variable 0I_CUFYE is dring me craz..
can anyone help...
regards,..
rK

Hi RK:
Check if the Note below is applicable to your system.
SAP Note 645545 - "Retro Fit of CRM-ICM BI Content 3.3 Corrections"
Regards,
Francisco Milán.

Current year /last year in reports

I need to report summarised data for range of periods and I need to compare the current year results with last year.
For example I need to report Jan to June of current year and compare in the same reports the results of last year.
How to select the last year? I tried with offset (year-1) but it does not work.
Since I am giving the range of period( 1 to 6) in selection the period , hence the offset does not populate.
Sure mark for helpful answers.

Mani,
as with your other topic in the BCS forum, there are ways to use the offset for this, but it all depends what variables you use for the period/year derivation. It also depends if you are using BCS and need the YTD values.
so, here are a couple of options:
if you are using the fiscal year/period variable, then you will be restricted by what your FY variant is. (thus the value of your offset). I think even if you use K4, taking -12 from your value will get you to the same period prior year.
as with other recommendations here in the forum, you can offset just the year variable if your are using two separate ones (one for posting period one for fiscal year). As BCS doesn't have the cumulative KF's, this is pretty much the only option that you have if you need to get the YTD values (since you need period 00 for the YTD values in the BS)
You mentioned that the offsets don't work for you - double check that by using the text variables in the column headers, and you should see what data is being pulled in there. Also, make sure that you are restricting the variables (fiscal year) on each column. If you put the restriction on the entire query, it will only give you one value, so instead you need to put the fiscal year variable in each column (with appropriate offsets)
let us know if that worked

Items are in different fiscal years - Posting

Hello
Here one user is doing a transaction F-32 for clear customer items. He has to clear items but the items were posted in different fiscal years. When he tries to post the document, it gives the message "Items are in different fiscal years". few items are in the last year and rest are in the current year. Both the fiscal years are open in the case. How can I post the document ?

can you provide the message number.
can you also confirm if this is an error, warning or message.
As standard you should be able to clear open items from different fiscal years.
Are you matching invoices off with a zero balance?
Also can you confirm if you have activated document splitting?

Posting of p&l accounts in prior periods at go live with wbs

Hi gurus,
As client requirement is to see profit and loss reporting from january in case of may 2014 golive, is there any issue if we post monthly entries of p&l accounts with relevant cost center/wbs with jan to april posting dates and run project settlement every month from period 1 to 4 so that project cost can be settled on cost center. And as far as balance of balance sheet accounts are concerned, balances will be uploaded on golive date in may.
Please let me if there is any issue with above mentioned solution which will give p&l details for this year in sap....
Thank you

Hi Collet,
We have configured it this way because our users told us that they needed to adjust the current period profit / Loss account after all the interunit eliminations were made, so when having to reclassify it between minority interest - Retained earnings amount and the group retained earnings, only the net balance in that account should be considered and not the one calculated in FI.
Example: FI Balances:
1.000,00 u20AC       4300 - Accounts receivable
100,00 u20AC          5720 - Banks
-1.000,00 u20AC       7000 - Income
-100,00 u20AC         7000 - Income intragroup
-1.100,00 u20AC       1290 - Retained earnings current year
1.100,00 u20AC        8000 - current year income
IC:
100,00 u20AC      7000 - Income intragroup
-100,00 u20AC     1298 - P&L clearing account
100,00 u20AC      1290 - Retained earnings current year
-100,00 u20AC     8000 - current year income
Balance After IC:
1.000,00 u20AC        4300 - Accounts receivable
100,00 u20AC            5720 - Banks
-1.000,00 u20AC       7000 - Income
-100,00 u20AC          1299 - Clearing account for P&L
-1.000,00 u20AC       1290 - Retained earnings current year
1.000,00 u20AC        8000 - current year income
So, while reclassifying the net retained earning for current year (minority interes 20% share):
1.000,00 u20AC     1290 - Retained earnings current year
-800,00 u20AC       1291 u2013 Retained earnings current year consolidation group
-200,00 u20AC       1230 - Retained earnings current year minority interest
I know what you are saying but Why is this wrong?

Load Transactional Data Current Year: 0PM_OM_OPA_1

Hi Experts,
We are doing load monitoring on dailiy basis, As we are doing some testing in the BW Development system, we are loading data into the cube 0PM_C01. we want to load the current year data (2007-2008). but whenever we are trying to load through the InfoPackage "Load Transactional Data Current Year: 0PM_OM_OPA_1" it doesn't delete previous load requests. It was initially configured with this option not selected. we recently changed it, but it still doesn't delete. The only difference we see between this load and others that do delete is that this one is executed from a process chain rather than an InfoPackage Group. What do we need to do to make it delete previous load requests?
And moreover the data is updated in the data target with two infosources namely 0PM_OM_PA_1 and 0PM_OM_PA_2.
Because you eliminated use of the four conditions, it deleted the delta initialization and delta update requests loaded from InfoSource 0PM_OM_OPA_2. We don't want it to do that!!! I'm not sure whether we had any test data in the cube that had been loaded from the flat file, but I imagine it would delete those as well. I believe we need all four conditions checked,
So please help me in this regard. points will be assigned.
Regards
sekhar

Hi experts,
Please help in this regard.
we are loading the data from two insources to one data target. two insources are :
0PM_OM_OPA_1 and 0PM_OM_OPA_2 , as they are loading the current year data.
we have scenario like this please give your valauble inputs.
I am still perplexed by the "Overlapping" option. Why doesn't the "Same or more comprehensive" option work? The requests we want it to replace have identical Data Selection because they were loaded by the same InfoPackage. The InfoPackage "Load Transactional Data Current Year: 0PU_IS_PS_2" (ZPAK_3RUTSXU2BWPBKELMBE0T6NS3U) uses the "Same or more comprehensive" option and it does delete previous requests. What is different about 0PM_OM_OPA_1?
points will be assigned for the speedy reply.
thanks
sekhar

Variable Report Filter (Current Year)

Dear Gurus,
I need a report which always will work with current year measure. (Without asking to user in selection screen) The system should automatically assign the current year. I created an object in universe. In definition tab, in the select statement I wrote to_char(sysdate,'yyyy') . But, in report and while the system gives an error message like "Parse failed. Exception: DBD, The supplied XML is not valid. to_char(sysdate, 'yyyy')State: N/A". I think the formula is wrong but I wrote it by referencing OSS note 1381486. Are there any suggestion? Thank you.

Hi,
This should have been posted in the designer section, but...
I think I know why you are having problems getting a right answer, the parse failed message says:
The supplied XML is not valid.
Which leads me to believe you are using an OLAP universe (on top of BW may be?), all the solutions given here are for SQL access.
Unfortunately, there is no string handling possible in an OLAP universe on top of BW, you would have to resort to solving this in the underlying BEx query for this universe.
You can think along the lines of using a BEx variable that is input ready, takes multiple values, is mandatory and has a default value filled with by a user exit (which makes it default to current year).
You can show the prompt message of the BEx variable for when the user wants to select different year(s).
Not showing the prompt and leaving it empty will trigger the default.
Good luck,
Marianne

Year totals not showing in my report

I have a Account by Time report where I have to show the balances at the year end totals for each account.
Everything is working fine for all accounts but except for the accounts which have ACT_TYPE as AST.
How to show the year total for accounts with type AST in a report?

Hi,
When the planned or budgeted amounts are entered, it is usually entered for all the months. You can either choose to manually enter them or do some kind of forecasting technique to populate all the months, based on some reference.
However, I have seen examples, wherein the planned amount is entered only for the last month of the year. In this case, the 2011.total values will come properly; since the dec month has the plan values.
The key point is if you want to see total value, the value should be there in dec. If you want to see q1 figure, value should be there in mar.
But is it very important to see the total figures?
Hope this helps.

How to create Current Year Filter at Universe Level ?

Hi,
I want to create a Current Year, Next Year and Last Year filters at Universe Level.
Can anyone help me with this.
I am using Netezza database and not able to find the appropriate date function in Netezza to accomplish this.
Any suggestions ?
Thanks

Hi,
You would somehow need to extract the Year part from the system date..
then
Current Year = Year
Next Year would be i.e Current Year + 1
Last Year would be i.e Current Year - 1
I guess this is the simple part... but you would need to find those functions on your RDBMS..
Hope this helps
Jacques

How to pick the file which is created with current date

Hello All,
I have an FTP server where files are created with current date as PO_CONFIRM_20100701.txt.
Need to pick the file based on current date. How to pick the above file format using file sender adapter. i.e what file pattern can we use so that file will be picked only on today's date
Regards,
Sreenivas.

Hi Srinivas,
It depends upon the OS you are using. If unix you can see an example script here:
http://www.computing.net/answers/dos/batch-file-to-rename-files-by-date/5517.html
If windows an example here:
http://en.kioskea.net/forum/affich-87157-finding-and-using-file-date-in-batch-command
You may need to change slightly to fit your exact requirements. But this would make you to start. Else you can also google to get the script. Here is one link:
http://www.google.com/#hl=en&source=hp&q=scripttorenamefileshavingtodaysdate&aq=f&aqi=m1&aql=&oq=&gs_rfai=CRE9SwTMsTNjiDpzGhgTm65iFCwAAAKoEBU_QC2i-&fp=e0fa4b5da4f245a4
Regards,
---Satish

Previous Year Closing and current year opening Bal not matching in FS10N

Hi for some GLs Previous year's Cumulative balance and current year's opening balance is not same. What could be the reason?
For example The closing Balance for FY 2008 is Rs.125398 where as in the current year opening balance it is displayed as some 65123 in the cumulative balance column what could be the reason. Is there any option for layout change at FS10N

Hi Srini,
Run F.16 and F.07 again and check.
Or tally your figures with normal transactions only in FBL3N.
And do checking GL balances for all the GL accounts except your vendor recon account and customer recon accounts.
Hope this might help a little.
Thanks,
Srinu

NVision prior year totals are overwriting with current year

Similar Messages

Maybe you are looking for