NVM shows the video file more than what is in the ...
Hi,
I recently took a video from my Nokia 6300 which was a 15 sec file and then in Nokia Video Manager 1.7.0 the same file after copying to the PC. In NVM is shows as 17 sec file.. all the videos in NVM shows more than what is the actual size in the device.
Anybody else seen this
Cheers,
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks
OMG. please someone help me!
Similar Messages
-
I have an iphone6 16gb and the device storage is showing more than what i have installed in it. A few days ago suddenly i got a popup window of my device storage getting full though i hardly had 4-5 apps and 500mb of photos. I tried restoring the phone and using it again as a new phone, i got my 10gb of storage but it still holds around 900 mb of storage which is not accounted. When i connect my phone to itunes, around 868mb is shown in the others section. I have no backed up data except for the contacts which are there in the icloud account. i dont understand what is that 868 mb of data.
This space is taken up by iOS 8.
http://www.theregister.co.uk/2015/01/02/apple_iphone_ios_8_lawsuit/
This is a lawsuit war going on. Sorry about your storage space though. -
Hi - for any photo, info in mountain lion shows a different file size than Photoshop does. I've tested with both CS3 and CS6 on 10.8.2 and get the same problem. This doesn't happen with CS3 and OSX10.4 or any previous versions of Photoshop and OSX. Anyone know why?
this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
tracking down the cause of the flakiness can be tricky ... as you already know ...
just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem? -
Why are my apps taking up more space than what the appstore says they will? Like were talking a half a GB more than what it should.
For example the app Modern Combat 4 says it should only be 1.58 GB on the appstore but when i go into settings>general>usage it says it takes up 2.0 GB.
Ive tried deleting the apps and then reinstalling them but they still take up so much more space.
This happens for multiple apps of mine. Some I have never even opened before.
I have an ipod touch (4th Gen)(32GB).
I link to a mac computer.
I have IOS version 6.1.3
I noticed this a long time ago but didnt need the space, Now i need the space!!
Please help!!Because you see the file size of the compuressed file. The file gets expanded when installed and that takes up more space. Also, data is kept in the app.
-
Rendering More than what in the Time line
i just sent a seq to color and turned broadcast safe off before i did the corrections. This SEQ was sent via the send to color option.
i only did i primary cc on the clip. Now i hit render and it seems to be rendering more than whats in the Color TL. In fact, i would say that it is rendering from shot marker to shot marker.
SHOT MARK = when i first capture clip into fcp the first thing i do is mark all of the clip to know where certain action is. Some time i set the in/outs and pull the shots to a bin for latter use.As Zeb is referring to, Hmmm... this is the first time (today) that I have seen a query about this extremely well known and exhaustively documented behaviour.
There are about a half a dozen of these, that catch out users of the product in its current form who make a dangerous set of assumptions about how media is treated between the editing software and the grading application. COLOR is not the only offender in this category, though -- there are serious problems associated with speed-remapped clips in many external VFX packages.
Among AVID users, time remaps are one of the biggest complaints about the Final Cut workflow, notwithstanding FC's "goldfish memory" when it comes to media paths and file names.
jPo -
What phones have max jar file more than 300 kB?
What phones have max jar file more than 300 kB? Model and max jar size, please.
300k - thats really much.
I'm pretty sure no phones support such big midlets when installed over-the-air.
However, heres a link to the mobile database of Nokia:
http://www.forum.nokia.com/main/0,6566,015-Band-GSM-9,00.html#matrix
As you can see, it seems the Nokia6600 doen't have a max-midlet size...
lg Linuxhippy -
Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?
Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked. -
How to transfer my iphone video to computer,the video siza more than 1.5G
how to transfer my iphone4 video to computer. the video siza more than 1.5G
Follow the instructions here or here, and then sync the iPhone with the iTunes library containing the content.
(112570) -
Print more than what's showing in text field?
Is there any way I can set a pdf form to print more than what is displayed in a text field? i.e., when there are more text lines than space in the text field and you need to scroll down to read it?
The only way I can think is to collate responses and export to a spreadsheet and print from there but I was wondering if there was a way to do it from the form itself (i.e., have the text automatically shrink or have it print more on the page and have the document made automatically longer.
CheersThank you - Is there an equivalent simple feature for LIVECYCLE such as setting font size to AUTO or do I need to go into that dynamic fiels thingy?
Cheers:) -
I recently updated my apple tv software anvd now it just constantly blinks a white light in the front and will show no video to my tv what do I do
Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore) -
How to show an HTML file (more then 1MB size) in JEditorPane
I an trying to show an HTML file (more then 1 MB size ) in JEditorPane
but getiing OutOfMemory error.
if i try the same for size less then 1 MB(i tried till 850KB) then it will work fine.
I am using setPage() method of JEditorPane.
please provide solution .I meet the same question, and even worse.
I created a html file with frameset, when i point to the link which is an html file larger than 500kb . it fails. and some error "infinite loop in formatting" is thrown
in javax. swing.text.FlowView. I read the code of this class, and can't tell what's the error of my application.
Can someone help and give some answer? -
I cannot show my video files on microsoft office program with macair book 11 inc notebook while using projector
When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
How to get video of more than one security camera in java
I want to get video from more than one security cameras and i really donot know yet how we do this that get videos continously with more than one camera
olz i a beginner help meHello.
I don't know if the topic still matters, but as I took advantage from the information in the preview posts, I decided to give my share.
I successfully ran three webcameras at the same time in a Linux machine with JMF.
The two main issues are:
1. It is necessary to run the binary "jmfregistry" ($JMFHOME/bin/jmfregistry) to detect the cameras every time a new one is added to the system. (Remember to run the binary with a user with write privileges on the registry file ($JMFHOME/lig/jmf.properties)).
2. It is mandatory to plug each camera in a different usb bus. In my case, the PC I was using had three accessible two-ports buses, two in the rear and one in the front of the box. If we try to use two cameras in the same bus, one of them won't work or the detecting procedure in the "jmfregistry" program will hang.
I hope it helps. Any question, please feel free to ask.
Andr� Braga
My configuration:
Java:
Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
JMF-2.1.1e_linux_native
The machine:
OpenSuse Linux version 10.2 (kernel 2.6.18.2-34-default)
running in a Celeron D processor 2.66 GHz
Motherboard: Giga-byte GA-8IPE1000 Pro2 motherboard (865PE)
The result of the "lsusb" command:
Bus 004 Device 004: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 023: ID 0c45:6007 Microdia
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 004: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam
Bus 003 Device 001: ID 0000:0000
In time (for linuxers): It was necessary to download and install the gspcav driver (http://mxhaard.free.fr/). It is also necessary do load this driver before the camera driver:
modprobe gspca
modprobe zc0301 (this one comes with the distribution) -
.pck file (more than 5gb) not de-compressing to smspkgdriveletter$ on BDP
SCCM 2007 R2
.pck file (more than 5gb) not de-compressing to smspkgdriveletter$ on BDP
.pck file which is distributed to BDP is not decompressing to SMSPKG share folder.
.pck file is more than 5GB, i hear that this is a known issue but unfortunately i don't know the work around.:(
Please help!The 'traditional' way the 32-bit virtual address space is split is 1 : 3GB (kernel : user). RHEL 3 hugemem kernel has a 4 : 4 GB split, recommended for >16GB RAM machines.
In the case of Oracle server on RHEL, the 'default' theoretical max is around 1.7GB for SGA, or 2.7GB with hugemem kernel. That is, if you configure things correctly. E.g. have you set the shm kernel parameters?
What is exactly the problem you run into? -
Hello,
I know that there is an issue in BPEL loading files more than 7 mb. By increasing the JVM memory (using the mx parameter) we can bypass that (and it works fine). The problem is we loose the execution trace of the BPEL process in the management console. Is there any workaround for that ?
Thanks for you input / help on that issue.By the way, since it is very large XML files with a lot of children nodes, we cannot split the XML file... ;-)
Message was edited by:
emarcoux
Maybe you are looking for
-
I have just been listening to an album on my iphone through the cloud, and noticed that the album was playing in an odd order, and whe I tried to adjust to play the album from the beginning again it still took me to what seemed a random track next, a
-
ever since i downloaded the 4.0 version of firefox, it has not worked on either computer[ macs] - earlier versions worked fine. It refuses to load pages and freezes [ on various sites , not just one]so i have to force quit it over and over.
-
I cant delet all the itunes files o my cp to download the
I cant delet all the bonjur files to download the new. Itunes what do i do
-
How do I record lossless audio?
Thinking of getting a Pono player and will need to burn audio using ALAC/FLAC. Have no idea what all this is. Any suggestions on where to go for information?
-
Buttons in Interactive Reports
Hi, I have created a IR with columns x,y,z where y and z should retrieve the sysdate time. I have created y and z columns with HTML expression <input type="submit" value="Start"/> and <input type="submit" value="Stop"/>. I try to do the following whe