NVSRUN (nVision-Report) - nVision process going in the error status

NVSRUN (nVision-Report) - nVision process going in the error status for all nVision reports submitted from the web.
All nVision reports submitted online from the web are failing. Need to create new run control ID? How to do that for NVSRUN process?
========================================================================================
Message:
Process Request shows status of 'INITIATED' or 'PROCESSING' but no longer running

Make sure u can open excel from the process scheduler server manually. when excel.exe gets crashed on the server, nvision reports may start to fail on the web. if u have too many excel.exe on the task manager also, u might want to kill the executables by suspending the prcs.
make sure u have the right parameters for the drilldown and layout paths. this also can contribute to the process running to error status.
Need to add the run control id - for a drill down report request u don't need a run control id. for a report book u can always add a run control parameters for every run. u can also differentiate the reports by the business units with your run control ids.
Thanks

Similar Messages

TS3694 my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.

my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please help

This is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

My daq 6008 wil not drop the 5V after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside

my daq 6008 wil not drop the 5V on a digital output after the VI is stopped, i have a digital signal going from the error out on the daq in the while loop to the error in on the daq outside the while loop and a boolean going to the data of the daq outside, but i can t seemto get it to work

i attached the block diagram so you can have a look
Attachments:
PID Temp control.docx ‏120 KB

Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)"

When I try to package a file with a lot of links, the Indesign CC packaging process fails with the error message "Unable to copy necessary file(s)". I am able to make a PDF of the same file, but when packaking the process fails every time. The app does not crash, just gives an error message. What gives?
(I'm using a MacBook Pro Retina Display with 16 GB RAM, running OS 10.9 and all CC 9.1 updated with the latest patches).

@John – that's really strange… the thing with the file names depending on the file type. That could eleminate Mavericks a bit from the equation and put the weight more on InDesign CC.
Provided:
1. You give it a go with InDesign CS6 v8.0.2 and tests are showing it will work fine in this regard.
2. The same composite characters are present in both file types, the ai files and the PhotoShop ones. On a Mac OSX characters for files and folders can consist of "composite" components:
ü for example is a two component one: the u and the two dots above the u. On a machine with MS Windows, this is not the case…
InDesign CC was programmed from scratch for a 64 bit architecture. So it could be a severe bug in InDesign CC.
Maybe other readers in this forum could test for these cases…
Uwe

DPM encountered a retryable VSS error. (ID 30112 Details: VssError:The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3))

I got this error, how to fix it?
DPM 2010 with latest roll-up (KB2615782) | DELL Server R710 (Windows 2008 R2 SP1) RAM: 24GB PF: 36-60GB | DELL TL4000 (4 Drives) | DELL TL2000 (2 Drives) | And still struggling and monitoring... Battle continues... life never happy ever after.. :(

In Hyper-v, I have this errors:
List Writers
Writer name: 'Microsoft Hyper-V VSS Writer'
Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {52a247b1-bd8e-499c-915d-314f9080e993}
State: [11] Failed
Last error: Retryable error
Eventvwr:
SOURCE: VSS ID: 8229
A VSS writer has rejected an event with error 0x800423f3, The writer experienced a transient error. If the backup process is retried,
the error may not reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
PostSnapshot Event
Context:
Execution Context: Writer
Writer Class Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Name: Microsoft Hyper-V VSS Writer
Writer Instance ID: {52a247b1-bd8e-499c-915d-314f9080e993}
Command Line: C:\Windows\system32\vmms.exe
Process ID: 2460
SOURCE: HYPER-V-VMMS ID: 10143
Failed to delete the shadow copy (VSS snapshot) set with id '3ED86740-3BFC-4FD5-B6B6-5ADD63E87DB0' in the running virtual machine 'MACHINENAME': This operation returned because the timeout period expired. (0x800705B4). (Virtual machine ID E130C3C7-D2BC-4234-BD2A-766054A163F9)

Post-processing ends with the error message

Hi
when i try to run a report, i am getting the below error.
Beginning post-processing of request 5947956 on node RWS60160REMS at 15-MAR-2012 04:13:48.
Post-processing of request 5947956 failed at 15-MAR-2012 04:13:51 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
i check the OPP and the error stack is:
[3/15/12 4:13:51 AM] [2103265:RT5947956] Output file was found but is zero sized - Deleted
[3/15/12 4:13:51 AM] [UNEXPECTED] [2103265:RT5947956] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:677)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:425)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:244)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:182)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:6032)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:302)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:176)
Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
The error is : Caused by: oracle.xdo.parser.v2.XSLException: <Line 12, Column 34>: XML-22047: (Error) Invalid instantiation of 'xsl:with-param' in 'DPHEVD' context.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.
Need help on this issue.
Thanks

Please post the details of the application release, database version and OS.
I checked my XSL template and corrected that line.
even after the correction it the error still remains. In fact i deleted the line12. But it still shows that the line exists.
I updated the template many times but it keeps picking a wrong template.Please create a new template and check then. Also, bounce the OPP.
Thanks,
Hussein

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

When i try to execute a report from forms10g i found the errore id not ....

i have a button in a form that run on forms10g that tri to execute a report in the web :
the trigger is this
**** when i try to execute the button the error is that the is impossibile to find the "report ID"???
there is a easist solution to execute a report from a form button ????
thank's !
DECLARE
report_id Report_Object;
BEGIN
report_id:= find_report_object('imm_print_01');
PROCEDURE RUN_REPORT_OBJECT_LIST(report_id , 'repSRV' , 'pdf');
END;
the procedure run_report_object_list is the follow :
PROCEDURE RUN_REPORT_OBJECT_LIST(report_id REPORT_OBJECT, reportserver
varchar2,
runformat varchar2) IS
report_job_id VARCHAR2(100);
vc_rep_status VARCHAR2(20);
paramlist_id ParamList;
paramlist_name VARCHAR2(10):=âtmplistâ;
BEGIN
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,
SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,
reportserver);
paramlist_id:= get_parameter_list(paramlist_name);
IF NOT id_null(paramlist_id) THEN
destroy_parameter_list(paramlist_id);
END IF;
paramlist_id:=create_parameter_list(paramlist_name);
add_parameter(paramlist_id,âDESTYPEâ,TEXT_PARAMETER,âCACHEâ);
add_parameter(paramlist_id,âPARAMFORMâ,TEXT_PARAMETER,âNOâ);
add_parameter(paramlist_id,âdesformatâ,TEXT_PARAMETER,
runformat );
report_job_id:=RUN_REPORT_OBJECT(report_id,paramlist_id);
END;

Please see that in your form you have created a "report object" with the same name ie "imm_print_01" . This is done using Forms builder in object navigator
(For forms-reports intg pls see "forms reports integration whitepaper" (link below)
[    All Docs for all versions    ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Transporting Process Chains-includes the ERROR DTPs in the Target System

Hello Gurus,
Iam facing an issue in version NW2004s while transporting the Process Chains from DEV to QA. The Process Chains in the Target system are including the ERROR Dtps as parallel loads along with the regular DTP.This happens when there exists an ERROR DTP in the Target system at the time of Transport.
This will cause a problem
1.these would run parallel to the regular DTPs.
2.no of back ground processes running at any point will be beyond our limit.
Let me know if you have faced the same issue and how you resolved it.
Thanks
Jagadish

Hi DPN,
Check oout this thread. This might solve yuor problem.
Errors in Transportation
Thanks and Regards
Subray Hegde

Process chain failed with Error-Status Change of Process ABAP ZL321NIMIMUUT

Hi,
process chain got failed with Error --**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**

Hi Neha,
When we do the repeat after right click then we are getting this messege"--**Status Change of Process ABAP ZL321NIMIMUUT
Save Status and Trigger Events if Appropriate**"
I have come to know that there is one ABAP programe when we go to manage varient.
ABAP Programme"ZBWR_ZMYYNNINOH_CSV_CHANGE"

Facing the error : Status and active flag in one item do not match

Hi Experts,
I am getting error : Status and active flag in one item do not match in GOA distribution and while adding item in the item data , following are the relative information :
I am using SRM 4.0 and Item is free text.
Please help if you have faced such an error.
Thanks,
Atul

question not clear. you have activate one line item and the same not in ECC contract.
for ex
4600001000 - GOA
item 1 - active
ecc
4600001000 - contract
item - inactivate
-locked
muthu

How to view the report instance without going thru the infoviwe in webi

all,
when you run a publication with a destination on infoview .. then as the end user who want to see the report i do have to go to the publication to see the report, is there a way to go directly to the report without passing thru the publication ?
thanks
Philippe

You can use the SDK for viewing webi documents, but first you have to get the logon token (username, password, authentication).
You can see it for example in the CMC -> view
In order to get more information:
https://www.sdn.sap.com/irj/boc/sdklibrary
and there download the Viewers Java SDK, you will find there some examples.

TS3297 Hi I was down loading IOS 6 to my iPhone through I tunes got as far as processing file and the error message of error 5000 came up and said I would loose everything off my iPhone if I proceeded. I managed to down load for iPad fine. I have an iPhon

Just a beginner here first log in. Question is what do I do if I get an error message 5000 iF you progress you loose every thing - was trying to download IOS 6 onto my iPhone 4 and got to the very end when it ways processing file. Thank you

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

TS3694 When updating my Ipad right near the completion of the process i get the error #6 when i clicked onto this to find out what to do it sent me to -48 or 20000 - 200008 and a few more ? What should I do ? How do I know which one to do ?

When updating my Ipad 2 right near the completion of the porcess it gave me an error #6 not sure what to do . I made sure i was update in I tunes before I started process ? need some assistance ?

What iOS is on your iPad?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
From above link:
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Therefore - disable your firewall and anitvirus software temporarily.
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
To update the iOS - If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
To update your iOS - If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Inbound Idoc processing issues - Partner Profiles - error status 56

Hello All,
I'm having a little difficulty posting an idoc coming from MDM. It's a CREMDM04 xml coming from an MDM system. It is getting mapped through PI and is being split into ADRMAS02 and CREMAS04 Idocs. The message is being passed through XI and being posted to the ECC system, but certain fields in the EDI_DC40 header table are not being populated correctly (i believe). I'm using nothing but standard mapping/material from the SAP Business Content for XI. After looking through the standard XSLTs i cannot find the field-to-field mapping where the fields below are being populated.
The RCVPOR value (SAP[SID]) is correct when i view it in SOAP Header, but does not appear in the remote system under the receiver port for the inbound idoc.
The RCVPRN value ([String Value]) is incorrect in the SOAP Header and does appear in the remote system under the receiver partner number for the inbound idoc. How is the RCVPRN value being populated?
SOAP Header in IDocOutbound tag
<SAP:RCVPOR>SAP[SID]</SAP:RCVPOR>
<SAP:RCVPRN>[String Value]</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
I've been trying to trace down the string value for the RCVPRN, but i cannot find it anywhere. Perhaps i'm just overlooking it?
When i set the proper values (port = SAP<SIDofECC> and partner number = <LSnameof ECC>) using WE19 in the remote system then the partner profile is found and i'm left with different error to please specify an address group.
Any help is very much appreciated! :-D

Hi Jason ,
Just check out if you have done the following steps most of us make minor mistake here ....... I think this would solve your problem
To Configure the IDOC SCENARIOS ,PROCEED AS FOLLOWS
STEP 1:ALE SETTINGS TO POST IDOC INTO SAP R/3
We need to do the following settings in XI
1) Create an RFC Destination to the Receiving System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client, user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select Create New button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in XI towards R/3
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) Create an RFC Destination to XI in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client, user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Inbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Inbound Parameters.So click on ADD TO Create Inbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Message Type and Process Code.
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
do let me know if it helped
Edited by: Tom Jose on Feb 21, 2008 9:04 AM

NVSRUN (nVision-Report) - nVision process going in the error status

Similar Messages

Maybe you are looking for