NW 2004s ABAP, disp+work process failed to start
Hi,
I have installed NW 2004s ABAP edition without loopback adapter since my office network has DHCP server. When i start server message server starts without any problem but disp+work(dispatcher)try to start with message
running but message server unreachable and then stop with in few seconds and status of the server is yellow. I am not able to login to system through login pad. Please advice what could be stopping dispatcher running.
Thanks,
Prakash
Hi Subhash,
I am sorry i typed the wrong host name. I have both
127.0.0.l localhost
xx.xx.x.xx My PC Name
still dips+work process stopped after the giving same message.
I had developer trace on and got the following message:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 3376] Mon Oct 23 09:43:12 2006
[Thr 3376] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 65
intno 20050900
make: multithreaded, ASCII, optimized
pid 3400
[Thr 3376] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3400) [msxxserv.c 1824]
[Thr 3376] MsInitAclInfo: acl file C:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 3376] MsGetOwnIpAddr: my host addresses are :
[Thr 3376] 1 : [XX.XX.X.XX] and-cra-mccurr1 (HOSTNAME)
[Thr 3376] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 3376] MsHttpInit: full qualified hostname = and-cra-mccurr1
[Thr 3376] HTTP logging is switch off
[Thr 3376] set HTTP state to LISTEN
[Thr 3376] ms/icf_info_server : deleted
[Thr 3376] *** I listen to port sapmsNSP (3600) ***
[Thr 3376] *** I listen to internal port 3900 (3900) ***
[Thr 3376] *** HTTP port 8100 state LISTEN ***
[Thr 3376] CUSTOMER KEY: >K1197316065<
Thanks,
Prakash
Similar Messages
-
The disp+work process is not starting
Hi
I have Netweaver server 2004s (ABAP + JAVA) running on AIX 5.3 box.
The JDK installed is
java full version "J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20061124 (SR7)"
This server was running quite fine few days
Now i am facing a starbge problem
logs in dev_server0
JStartupReadInstanceProperties: read instance properties [/usr/sap/E60/DVEBMGS60/j2ee/cluster/instance.properties]
-> ms host : punlparidm06
-> ms port : 3961
-> OS libs : /usr/sap/E60/DVEBMGS60/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
:$
-> arg[ 34]: -DFRFC_FALLBACK=ON
-> arg[ 35]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 36]: -DSAPSTARTUP=1
-> arg[ 37]: -DSAPSYSTEM=60
-> arg[ 38]: -DSAPSYSTEMNAME=E60
-> arg[ 39]: -DSAPMYNAME=punlparidm06_E60_60
-> arg[ 40]: -DSAPDBHOST=punlparidm06
-> arg[ 41]: -Dj2ee.dbhost=punlparidm06
[Thr 772] *** ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-4) [jhvmxx_mt.c 542]
[Thr 772] *** ERROR => Cannot load Java VM (server) (rc=-1) [jlnchxxi_mt. 748]
[Thr 772] **********************************************************************
ERROR => Java VM initialization failed.
Please see SAP Note 943602 , section 'Java VM initialization issues'
for additional information and trouble shooting.
[Thr 772] SigISetIgnoreAction : SIG_IGN for signal 20
[Thr 772] JLaunchCloseProgram: good bye (exitcode = -1)
~
log in dev_bootstarp
JStartupReadInstanceProperties: read instance properties [/usr/sap/E60/DVEBMGS60/j2ee/cluster/instance.properties]
-> ms host : punlparidm06
-> ms port : 3961
-> OS libs : /usr/sap/E60/DVEBMGS60/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
:$
-> arg[ 18]: -DSAPSTART=1
-> arg[ 19]: -DCONNECT_PORT=44632
-> arg[ 20]: -DSAPSYSTEM=60
-> arg[ 21]: -DSAPSYSTEMNAME=E60
-> arg[ 22]: -DSAPMYNAME=punlparidm06_E60_60
-> arg[ 23]: -DSAPPROFILE=/usr/sap/E60/SYS/profile/E60_DVEBMGS60_punlparidm06
-> arg[ 24]: -DFRFC_FALLBACK=ON
-> arg[ 25]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 26]: -DSAPSTARTUP=1
-> arg[ 27]: -DSAPSYSTEM=60
-> arg[ 28]: -DSAPSYSTEMNAME=E60
-> arg[ 29]: -DSAPMYNAME=punlparidm06_E60_60
-> arg[ 30]: -DSAPDBHOST=punlparidm06
-> arg[ 31]: -Dj2ee.dbhost=punlparidm06
[Thr 772] Thu Aug 2 01:17:07 2007
[Thr 772] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID6027841
[Thr 772] Thu Aug 2 01:17:23 2007
[Thr 772] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 772] Thu Aug 2 01:17:40 2007
[Thr 772] JLaunchIExitJava: exit hook is called (rc = 0)
[Thr 772] SigISetIgnoreAction : SIG_IGN for signal 20
[Thr 772] JLaunchCloseProgram: good bye (exitcode = 0)
~
~
~
Best Regards
ManojHi,
Check JAVA version
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Regards
Ben -
Hi all,
I appreciate the help. I am trying to run the disp+work process. It runs for about a minute then stops.
Please see below trace file. I can see its getting a login error for \SAPServiceBWP, but am not even trying to run the instance using that username.
Thanks
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Tue Nov 01 10:52:35 2011
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\BWP\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\BWP\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\BWP\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 00
M sid BWP
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 146
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 7012
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 7012) [dpxxdisp.c 1305]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Tue Nov 01 10:52:36 2011
M DpShMCreate: sizeof(wp_adm) 50320 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
M DpShMCreate: sizeof(comm_adm) 2208080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000111A0050, size: 8029744)
M DpShMCreate: allocated sys_adm at 00000000111A0050
M DpShMCreate: allocated wp_adm at 00000000111A2150
M DpShMCreate: allocated tm_adm_list at 00000000111AE5E0
M DpShMCreate: allocated tm_adm at 00000000111AE640
M DpShMCreate: allocated wp_ca_adm at 00000000117124E0
M DpShMCreate: allocated appc_ca_adm at 00000000117182A0
M DpShMCreate: allocated comm_adm at 000000001171A1E0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000011935330
M DpShMCreate: allocated gw_adm at 00000000119353B0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 00000000119353E0
M DpShMCreate: allocated wall_adm at 00000000119353F0
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Nov 01 10:52:37 2011
M ThInit: running on host sv1gbdb029
M
M Tue Nov 01 10:52:38 2011
M calling db_connect ...
C Thread ID:8036
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\BWP\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 144
C patchcomment MSSQL: ODBC fastload on separate connection (1131805)
C np:(local) connection used on SV1GBDB029
C CopyLocalParameters: dbuser is 'bwp'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 23715. hr: 0x8000ffff Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 18456, sev 0), Login failed for user 'SV1GBDB029\SAPServiceBWP'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 4060, sev 0), Cannot open database "BWP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23715]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> Login failed for user 'SV1GBDB029\SAPServiceBWP'. [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error -1 performing CON [dblink#5 @ 431] [dblink 0431 ]
B ***LOG BY0=> Login failed for user 'SV1GBDB029\SAPServiceBWP'. [dblink#5 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1440]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10468]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sv1gbdb029_BWP_00 on host sv1gbdb029 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Tue Nov 01 10:52:38 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 7012) [dpnttool.c 327]Hi Gary,
1) Is Your database up and running ?
2) Paste the output of R3trans -d .
Regards,
Deepak Kori -
Disp+work process was down after the Restoreing the backup
Disp+work process is down after the Restore of the backup
s/m configration: windows 2003 server + oracle 10g
The below is the log file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid PRA
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 2928
Thu Apr 07 18:58:10 2011
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2928) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Apr 07 18:58:15 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >pwsap_PRA_01 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
DpShMCreate: allocated sys_adm at 05C00040
DpShMCreate: allocated wp_adm at 05C01E28
DpShMCreate: allocated tm_adm_list at 05C065A8
DpShMCreate: allocated tm_adm at 05C065D8
DpShMCreate: allocated wp_ca_adm at 05FCBB70
DpShMCreate: allocated appc_ca_adm at 05FD1930
DpShMCreate: allocated comm_adm at 05FD3870
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06054730
DpShMCreate: allocated gw_adm at 06054770
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 060547A0
DpShMCreate: allocated wall_adm at 060547A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Thu Apr 07 18:58:16 2011
J2EE server info
start = TRUE
state = STARTED
pid = 3208
argv[0] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PRA\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1069
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=PRA
argv[7] = -DSAPMYNAME=pwsap_PRA_01
argv[8] = -DSAPPROFILE=D:\usr\sap\PRA\SYS\profile\PRA_DVEBMGS01_pwsap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( pwsap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >pwsap_PRA_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu Apr 07 18:58:17 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Thu Apr 07 18:58:42 2011
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1472
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:1085) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3208)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Apr 07 18:58:56 2011
ERROR => W0 (pid 3216) died [dpxxdisp.c 14021]
ERROR => W1 (pid 3224) died [dpxxdisp.c 14021]
ERROR => W2 (pid 3232) died [dpxxdisp.c 14021]
ERROR => W3 (pid 3240) died [dpxxdisp.c 14021]
ERROR => W4 (pid 3248) died [dpxxdisp.c 14021]
ERROR => W5 (pid 3256) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3264) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3272) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3280) died [dpxxdisp.c 14021]
ERROR => W9 (pid 3288) died [dpxxdisp.c 14021]
ERROR => W10 (pid 3296) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 3304) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 3312) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:06 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Apr 08 01:59:06 2011
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3216 Ended no 1 0 0
1 DIA 3224 Ended no 1 0 0
2 DIA 3232 Ended no 1 0 0
3 DIA 3240 Ended no 1 0 0
4 DIA 3248 Ended no 1 0 0
5 DIA 3256 Ended no 1 0 0
6 UPD 3264 Ended no 1 0 0
7 ENQ 3272 Ended no 1 0 0
8 BTC 3280 Ended no 1 0 0
9 BTC 3288 Ended no 1 0 0
10 BTC 3296 Ended no 1 0 0
11 SPO 3304 Ended no 1 0 0
12 UP2 3312 Ended no 1 0 0
Dispatcher Queue Statistics Fri Apr 08 01:59:06 2011
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Fri Apr 08 01:59:06 2011
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Apr 08 01:59:06 2011
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1597
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 07 18:59:11 2011
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >pwsap_PRA_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPAREDtrc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 07 18:58:16 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PRA\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid PRA
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3216
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3216) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Apr 07 18:58:17 2011
M ThInit: running on host pwsap
M
M Thu Apr 07 18:58:18 2011
M calling db_connect ...
C Prepending D:\usr\sap\PRA\DVEBMGS01\exe to Path.
C
C Thu Apr 07 18:58:27 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Thu Apr 07 18:58:28 2011
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PRA on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server PRA (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=061A3EC8,srvhp=061B5794)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *
M * LOCATION SAP-Server pwsap_PRA_01 on host pwsap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 07 18:58:28 2011
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3216) [dpnttool.c 327] -
Disp+work process starts than dies in SAP R/3 4.7 Ent. server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)Hi Bapujee,
I upgraded kernel 6.20 (Patch level 1602)as per the details you mentioned. when i restarted the server the message server starts perfectly,but disp+work process turns to yellow than dies(during that time WP Table is blank).
Also attaching dev_w0 file.
thanks & regards,
sreepathi
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Tue May 16 23:38:55 2006
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' ...
B Library 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' loaded
B Version of 'D:\usr\sap\ER2\SYS\exe\run\dbadaslib.dll' is "620.02", patchlevel (0.1599)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 1602
M intno 20020600
M make: multithreaded, ASCII
M pid 3180
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3180) [dpxxdisp.c 1088]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12920 (760)
M DpShMCreate: sizeof(tm_adm) 1835536 (9132)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05D10040, size: 2122960)
M DpShMCreate: allocated sys_adm at 05D10040
M DpShMCreate: allocated wp_adm at 05D10678
M DpShMCreate: allocated tm_adm_list at 05D138F0
M DpShMCreate: allocated tm_adm at 05D13918
M DpShMCreate: allocated wp_ca_adm at 05ED3B28
M DpShMCreate: allocated appc_ca_adm at 05ED8178
M DpShMCreate: allocated comm_adm_list at 05ED98E8
M DpShMCreate: allocated comm_adm at 05ED9900
M DpShMCreate: allocated ca_info at 05F08700
M DpShMCreate: allocated wall_adm at 05F08708
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Tue May 16 23:38:57 2006
M calling db_connect ...
C
C DBADASLIB : version 620.02
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.1599) Set isolation level calls optimized (note 762712)
C (0.1491) ThGetWpId corrected (note 624930)
C (0.1412) Support of SAPDB database hints (note 652096)
C (0.1411) LobGetpiece returns a failure if no data available (note 720343)
C (0.1355) SAPDB supports DBSL_CMD_INI_KRN_CALLBACK (note 624930)
C (0.1352) CHECKPOINT NOWAIT removed (note 708201)
C (0.1278) UPDSTAT without tracefile (note 696689)
C (0.1267) Explain problem with RAW values and IN-clause fixed (note 692188)
C (0.1189) Explain for database version 7.5 changed (note 680586)
C (0.1115) Object consistency (note 650475)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.3180.pct
C Precompiler Runtime : C-PreComp 7.3.1 Build 007-000-087-566
C Precompiler runtime is SAP DB 7.3.1.007
C *** ERROR => Using non supported SAP DB precompiler runtime version: 7.3.1.007
[dbslada.c 5093]
C *** ERROR => Min. version for this release must be 7.3.1.010
[dbslada.c 5095]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1200]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8812]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Tue May 16 23:38:57 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8957
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 233]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3180) [dpnttool.c 356]
Message was edited by: Sreepathi -
Disp+work process starts than dies in SAP R/3 4.7 Enterprise server
I stopped SAP R/3 4.7 ent server for backup, when i restart the Microsoft management console the disp+work process turns yellow to grey.
Can any one help me to solve this problem???
O/s :Windows2000 server
database :SAPDB 7.3
Here iam attaching the log files......
sapstart,dev_rfc,dev_w0,dev_disp,stderr2,stderr3 and stderr4
sapstart.trc:
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:35:56
SAP-R/3-Startup Program
Starting at 2006/05/13 14:35:56
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3352) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3188) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3856) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 14:44:15
(1264) Parent Shutdown at 2006/05/13 14:44:15
(1264) kill(3856) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 14:44:48
SAP-R/3-Startup Program
Starting at 2006/05/13 14:44:48
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3876) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3844) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/13 16:24:21
(1264) Parent Shutdown at 2006/05/13 16:24:21
(1264) kill(3844) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/13 17:53:25
SAP-R/3-Startup Program
Starting at 2006/05/13 17:53:25
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(2872) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(948) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3468) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:36:33
(1264) Parent Shutdown at 2006/05/14 14:36:33
(1264) kill(3468) failed.
SAPSRV\Administrator is starting R/3 System at 2006/05/14 14:41:50
SAP-R/3-Startup Program
Starting at 2006/05/14 14:41:50
Startup Profile: "D:\usr\sap\ER2\SYS\profile\START_DVEBMGS01_SAPSRV"
Starting Programs
(3220) Execute: D:\usr\sap\ER2\SYS\exe\run\strdbs.cmd ER2
(3236) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\msg_server.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
(3244) CreateProcess: D:\usr\sap\ER2\SYS\exe\run\disp+work.exe pf=D:\usr\sap\ER2\SYS\profile\ER2_DVEBMGS01_SAPSRV
SAPSRV\Administrator is stopping R/3 System at 2006/05/14 14:47:09
(1264) Parent Shutdown at 2006/05/14 14:47:09
(1264) kill(3244) failed.
2.dev_w0
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Sun May 14 14:42:14 2006
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3296
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3296) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 20304 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00100040, size: 1985344)
M DpShMCreate: allocated sys_adm at 00100040
M DpShMCreate: allocated wp_adm at 00100560
M DpShMCreate: allocated tm_adm_list at 001054B0
M DpShMCreate: allocated tm_adm at 001054D8
M DpShMCreate: allocated wp_ca_adm at 002A2198
M DpShMCreate: allocated appc_ca_adm at 002A67E8
M DpShMCreate: allocated comm_adm_list at 002A7F58
M DpShMCreate: allocated comm_adm at 002A7F70
M DpShMCreate: allocated ca_info at 002D6D70
M DpShMCreate: allocated wall_adm at 002D6D78
X
X Sun May 14 14:42:16 2006
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '5\dbadaslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(5\dbadaslib.dll) Error 126 [dlnt.c 226]
M Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library '5\dbadaslib.dll'
[dbcon.c 3789]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 008192) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPSRV_ER2_01 on host SAPSRV (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Sun May 14 14:42:16 2006
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3296) [dpnttool.c 346]
3. dev_rfc.trc
ERROR file opened at 20060419 104033 India Standard , SAP-REL 620,0,1574 RFC-VER 3 673347 MT-SL
T:73832 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1422
T:73832 <* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 3:RFC_SYS_EXCEPTION
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:34 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:52:35 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:53:15 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:55:12 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 10:58:17 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:01:11 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:21 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:02:22 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
>TS> Wed Apr 19 11:05:32 2006
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCall [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcCallReceive [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcSendData [1] : returns 18:RFC_INVALID_HANDLE
T:73832 <* RfcDispatch [1] : returns 18:RFC_INVALID_HANDLE
ERROR file opened at 20060421 202203 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:4468 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:4468 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060428 194717 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
>TS> Fri Apr 28 19:47:18 2006
T:73164 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:73164 <* RfcDispatch [1] : returns 1:RFC_FAILURE
ERROR file opened at 20060512 214308 India Standard , SAP-REL 620,0,841 RFC-VER 3 568712 MT-SL
T:5504 Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1402
T:5504 <* RfcDispatch [1] : returns 1:RFC_FAILURE
4.dev_disp.trc
trc file: "dev_disp", trc level: 1, release: "620"
Sun May 14 14:42:07 2006
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3244
***LOG Q00=> DpSapEnvInit, DPStart (01 3244) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 14 14:42:11 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 20304 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001C0040, size: 1985344)
DpShMCreate: allocated sys_adm at 001C0040
DpShMCreate: allocated wp_adm at 001C0560
DpShMCreate: allocated tm_adm_list at 001C54B0
DpShMCreate: allocated tm_adm at 001C54D8
DpShMCreate: allocated wp_ca_adm at 00362198
DpShMCreate: allocated appc_ca_adm at 003667E8
DpShMCreate: allocated comm_adm_list at 00367F58
DpShMCreate: allocated comm_adm at 00367F70
DpShMCreate: allocated ca_info at 00396D70
DpShMCreate: allocated wall_adm at 00396D78
Sun May 14 14:42:12 2006
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( SAPSRV) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Sun May 14 14:42:13 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 14 14:42:52 2006
ERROR => W0 (pid 3296) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3304) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 3312) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 3320) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 3328) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 3336) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 3344) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 3784) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 3820) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 3584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 3668) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 3632) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 3652) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 3616) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 3648) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 3628) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
ERROR => W16 (pid 3656) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
ERROR => W17 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W17
ERROR => W18 (pid 3928) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W18
ERROR => W19 (pid 3880) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W19
ERROR => W20 (pid 3432) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W20
ERROR => W21 (pid 3124) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W21
ERROR => W22 (pid 3800) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W22
ERROR => W23 (pid 3804) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W23
ERROR => W24 (pid 3812) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W24
ERROR => W25 (pid 3832) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W25
ERROR => W26 (pid 3480) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W26
my types changed after wp death/restart 0xbd --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 14 14:42:57 2006
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3244) [dpxxdisp.c 7883]
5.stderr2
D:\usr\sap\ER2\DVEBMGS01\work>set DBNAME=ERc
D:\usr\sap\ER2\DVEBMGS01\work>if "" == "" (set DB_USERKEY="c" ) else (set DB_USERKEY="c_J2EE" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" dbm_version VERSION 1>dbversion.out
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "OK" dbversion.out 1>dbmcli.err
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 goto err_dbm
D:\usr\sap\ER2\DVEBMGS01\work>findstr -i "7.4" dbversion.out 1>adatmp
D:\usr\sap\ER2\DVEBMGS01\work>if errorlevel 1 (set dbmcli_cmd="db_warm" ) else (set dbmcli_cmd="db_online" )
D:\usr\sap\ER2\DVEBMGS01\work>dbmcli -U "c" "db_warm"
OK
Database ER2 successfully started !
6. stderr3
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
7.stderr4
maximum pfclock time: 4294sec (1)
work process W0 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W2 died => tskh_init: db_connect
IcmBndMain: handle for "localhost:8001" successfully sent to server
maximum pfclock time: 4294sec (1)
work process W23 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1155
adjust_clock: delta 1106
work process W26 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W10 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
work process W20 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9312
adjust_clock: delta 1040
work process W7 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W18 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W12 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W1 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W14 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 760
work process W11 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1129
work process W25 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 3589
adjust_clock: delta 631
work process W24 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 757
adjust_clock: delta 652
adjust_clock: delta 514
work process W8 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W22 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1192
work process W21 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W3 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W16 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1617
adjust_clock: delta 1609
work process W5 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 9714
work process W17 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2063
work process W19 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 746
work process W6 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 2040
work process W4 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W15 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
adjust_clock: delta 1089
work process W13 died => tskh_init: db_connect
maximum pfclock time: 4294sec (1)
work process W9 died => tskh_init: db_connect
ICM up and operational (pid: 3272) ***
Shutdown ICM server ....maximum pfclock time: 4294sec (1)
ICM shutdown completed (pid: 3272) ***
DISPATCHER EMERGENCY SHUTDOWN => DpEnvCheck: no more work processes
maximum pfclock time: 4294sec (1)these are the content of some log files plz help me out my sap system is not starting my work process is ending in some ended status
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
Thu Oct 15 20:22:46 2009
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Thu Oct 15 20:23:12 2009
ERROR => W0 (pid 3988) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W1 (pid 3996) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W2 (pid 4004) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
ERROR => W3 (pid 4016) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W4 (pid 4024) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W5 (pid 4032) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W6 (pid 4040) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W7 (pid 4048) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W8 (pid 4056) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4064) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W10 (pid 4072) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
ERROR => W11 (pid 4080) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W12 (pid 4088) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 624) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
ERROR => W14 (pid 456) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W15 (pid 576) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
my types changed after wp death/restart 0xbf --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Thu Oct 15 20:23:17 2009
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3912) [dpxxdisp.c 7883]
trc file: "dev_ms", trc level: 1, release: "620"
[Thr 3908] Thu Oct 15 20:22:00 2009
[Thr 3908] MsSSetTrcLog: trc logging not active
[Thr 3908] relno 6200
[Thr 3908] patchlevel 0
[Thr 3908] patchno 665
[Thr 3908] intno 20020600
[Thr 3908] pid 3904
[Thr 3908] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3904) [msxxserv.c 1524]
[Thr 3908] MsHttpPortInsert: set HTTP state to LISTEN
[Thr 3908] MsHttpOwnDomain: own domain[1] = microsoft.com
[Thr 3908] *** I listen to port sapmsDEV (3600) ***
[Thr 3908] *** HTTP LISTEN ***
[Thr 3908] *** I listen to HTTP port 8100 ***
[Thr 3908] CUSTOMER KEY: >H2132125860<
[Thr 3908] Thu Oct 15 20:23:17 2009
[Thr 3908] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 1094]
[Thr 3908] *** ERROR => MsSRead: NiBufReceive (rc=NIECONN_BROKEN) [msxxserv.c 8523]
[Thr 3908] *** ERROR => MsSClientHandle: MsSRead C1 (sap_DEV_00), MSEINTERN [msxxserv.c 3662]
[Thr 3908] Thu Oct 15 20:33:37 2009
[Thr 3908] *** ERROR => MsSCheckConnections: no response from client C0 (192.168.1.25) after 300 secs received [msxxserv.c
2910]
[Thr 3908] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.25] [msxxserv.c 2914]
[Thr 3936] Thu Oct 15 20:37:12 2009
[Thr 3936] MsSExit: received SIGINT (2)
[Thr 3936] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3904) [msxxserv.c 4811]
trc file: "dev_w0", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:46 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3988
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3988) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:48 2009
M calling db_connect ...
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=03BFC74C,svrhp=06D04FC4)
C
C Thu Oct 15 20:22:50 2009
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=03BFC74C,srvhp=06D04FC4,usrhp=06D0D7A4)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:50 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3988) [dpnttool.c 346]
trc file: "dev_w1", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 15 20:22:36 2009
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' ...
B Library 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' loaded
B Version of 'F:\usr\sap\DEV\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.549)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 674
M intno 20020600
M pid 3996
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 3996) [dpxxdisp.c 1028]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12032 (752)
M DpShMCreate: sizeof(tm_adm) 1690816 (8412)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 055B0040, size: 1977072)
M DpShMCreate: allocated sys_adm at 055B0040
M DpShMCreate: allocated wp_adm at 055B0560
M DpShMCreate: allocated tm_adm_list at 055B3460
M DpShMCreate: allocated tm_adm at 055B3488
M DpShMCreate: allocated wp_ca_adm at 05750148
M DpShMCreate: allocated appc_ca_adm at 05754798
M DpShMCreate: allocated comm_adm_list at 05755F08
M DpShMCreate: allocated comm_adm at 05755F20
M DpShMCreate: allocated ca_info at 05784D20
M DpShMCreate: allocated wall_adm at 05784D28
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Thu Oct 15 20:22:44 2009
M calling db_connect ...
C
C Thu Oct 15 20:22:45 2009
C Got ORACLE_HOME=F:\oracle\ora92 from environment
C
C Thu Oct 15 20:22:49 2009
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPDEV's password
C Connecting as /@DEV on connection 0 ...
C Attaching to DB Server DEV (con_hdl=0,svchp=07BD053C,svrhp=07BD27A4)
C
C Thu Oct 15 20:22:51 2009
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
C Try to connect with default password
C Connecting as SAPDEV/<pwd>@DEV on connection 0 ...
C Starting user session (con_hdl=0,svchp=07BD053C,srvhp=07BD27A4,usrhp=07BDAF84)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3718]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9601]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1102]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8437]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sap_DEV_00 on host sap (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 15 20:22:51 2009
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8569
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 237]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3996) [dpnttool.c 346] -
Server down: disp+work process terminated
By mistake, SAP server(SMS) was deleted. We used the week old backup to restore
SMS. Now when we are trying to start the server, disp+work process get
terminated within 1-2 minute.Tried different option but it is not working
for us.
SMS is dual stack server. I have attached some log files of work directory.
Pls help us to fix this problem.
Thanks
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 5760] Fri Feb 10 13:51:14 2012
[Thr 5760] MsSSetTrcLog: trc logging active, max size = 31457280 bytes
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 143
intno 20020600
make: multithreaded, Unicode, optimized
pid 5756
[Thr 5760] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5756) [msxxserv.c 1853]
[Thr 5760] load acl file = D:\usr\sap\SMS\SYS\global\ms_acl_info.DAT
[Thr 5760] MsGetOwnIpAddr: my host addresses are :
[Thr 5760] 1 : [140.18.102.209] xxx.xxx (HOSTNAME)
[Thr 5760] 2 : [127.0.0.1] xxx.xxx (LOCALHOST)
[Thr 5760] MsHttpInit: full qualified hostname = xxx.xxx
[Thr 5760] HTTP logging is switch off
[Thr 5760] set HTTP state to LISTEN
[Thr 5760] MsHttpOwnDomain: own domain[1] = xxx.xxx
[Thr 5760] ms/icf_info_server : deleted
[Thr 5760] *** I listen to port sapmsSMS (3601) ***
[Thr 5760] *** I listen to internal port 3901 (3901) ***
[Thr 5760] *** HTTP port 8101 state LISTEN ***
[Thr 5760] CUSTOMER KEY: >U1041778160<
[Thr 5760] build version=701.2009.12.02
[Thr 5760] Fri Feb 10 13:52:52 2012
[Thr 5760] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from xxx.xxx
[msxxserv.c 4731]
[Thr 5760] Fri Feb 10 14:03:13 2012
[Thr 5760] *** ERROR => MsSCheckConnections: no response from client C0 (140.18.102.209) after 300 secs received [msxxserv.c 3217]
[Thr 5760] *** ERROR => MsSCheckConnections: disconnect now [140.18.102.209] [msxxserv.c 3221]
****I checked profile and Enqueue process is available in Profile **********
trc file: "dev_rd", trc level: 1, release: "701"
Fri Feb 10 13:51:21 2012
***LOG S00=> GwInitReader, gateway started ( 6076) [gwxxrd.c 1759]
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 140
intno 20020600
make: multithreaded, Unicode, optimized
pid 6076
gateway runs with dp version 246000(ext=110000) (@(#) DPLIB-INT-VERSION-246000-UC)
gateway (version=701.2011.04.20)
gw/reg_no_conn_info = 0
gw/local_addr : 0.0.0.0
SWITCH TRC-RESOLUTION from 1 TO 1
Fri Feb 10 13:51:22 2012
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Bind service sapgw01 (socket) to port 3301
GwIRegInitRegInfo: reg_info file D:\usr\sap\SMS\DVEBMGS01\data\reginfo.DAT not found
GwPrintMyHostAddr: my host addresses are :
1 : [140.18.102.209] xxx.xxx (HOSTNAME)
2 : [127.0.0.1] xxx.xxx (LOCALHOST)
Full qualified hostname = xxx.xxx
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 23856 (1704)
DpShMCreate: sizeof(tm_adm) 4415616 (21968)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 07A90040, size: 5081304)
DpShMCreate: allocated sys_adm at 07A90040
DpShMCreate: allocated wp_adm at 07A921A8
DpShMCreate: allocated tm_adm_list at 07A97ED8
DpShMCreate: allocated tm_adm at 07A97F08
DpShMCreate: allocated appc_ca_adm at 07ED3D88
DpShMCreate: allocated comm_adm at 07ED5CC8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07F56B88
DpShMCreate: allocated gw_adm at 07F56BC8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07F56BF8
MtxInit: -2 0 0
DpRqQInit: Parameter rdisp/queue_lock_level = 2
Fri Feb 10 13:52:16 2012
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 15085]Problem is fixed. One of log file indicate problem in shared memory. Shutdown and restarted server to fix this issue...
Also modified the boot.ini file. Added the following lines:(no idea about the details of fastdetect /PAE /3GB /userva=3000)
[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /noexecute=optout /fastdetect /PAE /3GB /userva=3000
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Enterprise" /fastdetect /NoExecute=OptOut /PAE /3GB /userva=3000
One of these two steps has fixed the error.
Thanks -
Dear Sir,
we are runing windows 2008 with db2, now server is not getting up
disp+work process show stooped.
here is siap Log
=======================================================
Running with CLI driver.
C *** ERROR in DB6Connect[dbdb6.c, 1737] CON = 0 (BEGIN)
C &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30061N
The database alias or database name "DEV
C &+ " was not found at the remote node.
SQLSTATE=08004
C
&+
C
&+
C *** ERROR in DB6Connect[dbdb6.c, 1737] (END)
C *** ERROR => DbSlConnect to 'DEV' as 'sapdev' failed
===============================================================
while checking db connection i got below message.
db2 => connect to dev
SQL1013N The database alias name or database name "DEV" could not be
found.
SQLSTATE=42705
db2 =>
please advice how to correct this error.
Thanks & Regards,
Hiten Modisadik,
what is FP?.
i got below out put while executing command which suggest by you
db2 => list db directory
System Database Directory
Number of entries in the directory = 1
Database 1 entry:
Database alias = DB2DEV
Database name = DCS55718
Node name = NDE43ED6
Database release level = d.00
Comment =
Directory entry type = Remote
Authentication = SERVER
Catalog database partition number = -1
Alternate server hostname =
Alternate server port number =
db2 => CATALOG DATABSASE
SQL0104N An unexpected token "DATABSASE" was found following "CATALOG".
Expected tokens may include: "DATABASE". SQLSTATE=42601
C:\Users\devadm>db2_kill
SQL1092N "DEVADM " does not have the authority to perform the requested comman
d or operation.
Regards,
Hiten -
hi all,
When my SAP MMC start . It start normally and turn GREEN and soon goes YELLOW. the disp+work process stopped at that time.
All servies are running.
-- Lee GreenDEV_W0
trc file: "dev_w0", trc level: 1, release: "46D"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Mar 16 21:19:56 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' loaded
B Version of library 'D:\usr\sap\TEK\SYS\exe\run\dboraslib.dll' is "46D.00", patchlevel (0.575)
B New connection 0 created
M relno 4640
M patchlevel 0
M patchno 748
M intno 0
M pid 1972
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1972) [dpxxdisp.c 912]
I MtxInit: -2 0 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <ES> Memory Reset enabled
X ES initialized.
M ThSysUsrCheck: clear T0
M calling db_connect ...
B find_con found the following connection for reuse:
B 0: name = R/3, concnt= 000000 state = DISCONNECTED, perm = YES, reco = NO
C Got ORACLE_HOME=D:\oracle\ora81 from environment
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@TEK on connection 0 ...
C
C Fri Mar 16 21:20:43 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c 2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 6721]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@TEK on connection 0 ...
C
C Fri Mar 16 21:20:44 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c 2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 6721]
C Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
C Logon as OPS$-user to get SAPR3's password
C Connecting as /@TEK on connection 0 ...
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c 2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 6721]
C Try to connect with default password
C Connecting as SAPR3/<pwd>@TEK on connection 0 ...
C
C Fri Mar 16 21:20:45 2007
C *** ERROR => OCI-call 'olog' failed: rc = 1033
[dboci.c 2423]
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 6721]
B ***LOG BY2=> sql error 1033 performing CON [dbsh 0695 ]
B ***LOG BY0=> [dbsh 0695 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink 0627 ]
B ***LOG BY0=> [dblink 0627 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1093]
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 7850]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M rfc_req = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server xyz_TEK_00 on host xyz (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Mar 16 21:20:45 2007
M * RELEASE 46D
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 7930
M * COUNTER 1
M *
M *****************************************************************************
M
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1972) [dpnttool.c 300] -
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
SAP mmc Disp+work process to be stopped
Hi,
I installed SAP Ecc6 + oracle 10g on windows 2003, after we restart the server SAP mmc Disp+work process to be stopped.
I ran the R3trans -d, i got the below error
2EETW169 no connect possible: "DBMS = ORACLE -
oracle_sid= 'DEV;ECC'"
R3trans finished (0012).
tans.log fiel
=========
4 ETW000 [dev trc ,00000] New connection 0 created 30 0.006959
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 34 0.006993
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 19 0.007012
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 23 0.007035
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 31 0.007066
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: dbs/ora/tnsname in profile missing
4 ETW000 90 0.007156
2EETW169 no connect possible: "DBMS = ORACLE --- ORACLE_SID = 'DEV;ECC'"
sqlnet.log
========
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=sapdev)(PORT=1527))(CONNECT_DATA=(SID=DEV)(GLOBAL_NAME=DEV.WORLD)(CID=(PROGRAM=D:\usr\sap\DEV\DVEBMGS03\exe\R3trans.exe)(HOST=SAPDEV)(USER=devadm))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 11-DEC-2009 22:14:28
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
===================================================
please help me to resolve the issue.
thanks.> Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Your Oracle version is unsupported and contains serious bugs.
Read the installation guide, it tells you to
- install the Oracle software delivered on the DVD (10.2.0.1)
- install the latest patchset
- install the latest interim patches
and then start the installation.
Download now the patches for 10.2.0.4 and the interim patches and install them.
Note 839187 - Oracle 10.2.0: Applying patch set/patches/patch collection
Markus -
Error DIsp+work process stoped
Dear All,
While i m starting my ecc6.0 server there is the message the disp+work process stoped .
what would be the problem please .
how to trubleshoot when disp+work process has been stoped .
deepakhi
Two places you need to check: EventViewer (Application and System logs) and the SAP Management Console (MMC).
Event Viewer can provide useful information and it may help you pinpoint where the problem resides. The SAP MMC gives you the ability to visually see the system status (green, yellow or red lights), view the work processes status and view the developer traces, which are stored in the "work" directory. Example: /usr/sap/TST/DVEBMGS00/work
and
Dispatcher Monitor (DPMON.exe), which is located under /usr/sap//sys/exe/run. Database logs
hope this helps
thx
Mysterious -
LS AppDomain Host Process, Failed to start Fabric Pool Manager.
Hi,
Today renewed the
Certificate in and the server will not start.
Can someone help me.
I've tried for several hours to fix it.
System
Provider
[ Name]
LS AppDomain Host Process
EventID
50006
[ Qualifiers]
50181
Level
2
Task
1029
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2015-02-21T22:57:29.000000000Z
EventRecordID
6508871
Channel
Lync Server
Computer
srvlync.itexpert.pl
Security
EventData
System.ApplicationException: Failed to start Fabric Pool Manager. at Microsoft.Rtc.AppDomainHost.Launcher.Initialize(String[] args) at Microsoft.Rtc.AppDomainHost.Launcher.Main(String[] args)
System
Provider
[ Name]
LS Server
EventID
12330
[ Qualifiers]
50152
Level
2
Task
1000
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2015-02-21T23:00:06.000000000Z
EventRecordID
6508872
Channel
Lync Server
Computer
srvlync.itexpert.pl
Security
EventData
C:\Program Files\Microsoft Lync Server 2013\Server\Core\RtcHost.exe
C3E8302D
The worker process failed to initialize itself in the maximum allowable time.Hi,
It can be the issue with Windows Fabric service.
Please try to Repair the Window Fabric Component with the following steps:
1. Stop Lync Services
2. Remove Windows Fabric application
3. Don’t Restart
4. Install Windows Fabric (C:\Sources\WindowsFabric)
5. Restart Windows
6. Confirm Windows
Fabric Service starts
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Disp+ work process changes from green to disabled
Hi all,
I want to install the SAP Netweaver 2004 server(ABAP + Java ) on windows box with MSSQL 2000 as backend.
I wanted to know the sequnce that needs to be followed to install the component.
I went in the following:
a)I installed the MSSQL Server 2004 SP4
b)I installed the ABAP part.
Now when i tried to start the server from the SAP Console ,the process
(disp + work) changes from green to disable.
If i check the logs i get the following
Thu Jun 28 16:26:07 2007
ERROR => W0 (pid 2912) died [dpxxdisp.c 12170]
ERROR => W1 (pid 2600) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 2392) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 156) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 2188) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2684) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 1888) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2912 (SIGUSR2)
ERROR => DpWpKill(2912, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-2600 (SIGUSR2)
ERROR => DpWpKill(2600, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-2392 (SIGUSR2)
ERROR => DpWpKill(2392, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-156 (SIGUSR2)
ERROR => DpWpKill(156, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-2188 (SIGUSR2)
ERROR => DpWpKill(2188, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2684 (SIGUSR2)
ERROR => DpWpKill(2684, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-796 (SIGUSR2)
ERROR => DpWpKill(796, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-1888 (SIGUSR2)
ERROR => DpWpKill(1888, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:17 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Jun 28 10:56:17 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2912 Ended no 1 0 0
1 DIA 2600 Ended no 1 0 0
2 UPD 2392 Ended no 1 0 0
3 ENQ 156 Ended no 1 0 0
4 BTC 2188 Ended no 1 0 0
5 BTC 2684 Ended no 1 0 0
6 SPO 796 Ended no 1 0 0
7 UP2 1888 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jun 28 10:56:17 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Jun 28 10:56:17 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Jun 28 10:56:17 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:22 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (432) (SOFT_KILL)
Stop icman
killing process (2124) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:432 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:23 2007
NiISelect: TIMEOUT occured (1000 ms)
Thu Jun 28 16:26:24 2007
[DpProcDied] Process died (PID:432 HANDLE:1600)
[DpProcDied] Process lives (PID:2124 HANDLE:1588)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jun 28 16:26:25 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2124 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3520) [dpxxdisp.c 8478]
Good Bye .....
What can be the problem.
Best Regards
Manojwhat is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
The disp+work process of my portal server can't start
Hi help me!
the trace:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EP7
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, optimized
pid 4144
Mon Jul 14 17:37:34 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4144) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Jul 14 17:37:39 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >hanep7_EP7_00 <
DpShMCreate: sizeof(wp_adm) 11488 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/53304/85528/138880
DpShMCreate: sizeof(slock_adm) 138880 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=1600/8/128056/128064
DpShMCreate: sizeof(file_adm) 128064 (72)
DpShMCreate: sizeof(vmc_adm) 12352 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06FA0040, size: 5203016)
DpShMCreate: allocated sys_adm at 06FA0040
DpShMCreate: allocated wp_adm at 06FA2090
DpShMCreate: allocated tm_adm_list at 06FA4D70
DpShMCreate: allocated tm_adm at 06FA4DA0
DpShMCreate: allocated wp_ca_adm at 073B78A0
DpShMCreate: allocated appc_ca_adm at 073BD660
DpShMCreate: allocated comm_adm at 073BF5A0
DpShMCreate: allocated slock_adm at 07440460
DpShMCreate: allocated file_adm at 074622E0
DpShMCreate: allocated vmc_adm_list at 07481720
DpShMCreate: allocated gw_adm at 07481760
DpShMCreate: allocated vmc_adm at 07481790
DpShMCreate: allocated ca_info at 074847D0
DpShMCreate: allocated wall_adm at 074847D8
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpFileInitTable: init table for 1600 entries
Mon Jul 14 17:37:40 2008
DpSesCreateTable: created session table at 07570040 (len=138424)
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
DpVmcInit2: o.k.
Mon Jul 14 17:37:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 4384
argv[0] = E:\usr\sap\EP7\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\EP7\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\EP7\SYS\profile\EP7_DVEBMGS00_hanep7
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EP7
argv[7] = -DSAPMYNAME=hanep7_EP7_00
argv[8] = -DSAPPROFILE=E:\usr\sap\EP7\SYS\profile\EP7_DVEBMGS00_hanep7
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( hanep7) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >hanep7_EP7_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Mon Jul 14 17:37:42 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Jul 14 17:38:21 2008
ERROR => DpHdlDeadWp: W0 (pid 4392) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 4400) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4408) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W3 (pid 4416) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W4 (pid 4424) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W5 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W6 (pid 4440) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W7 (pid 4448) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jul 14 09:38:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4392 Ended no 1 0 0
1 DIA 4400 Ended no 1 0 0
2 DIA 4408 Ended no 1 0 0
3 UPD 4416 Ended no 1 0 0
4 ENQ 4424 Ended no 1 0 0
5 BTC 4432 Ended no 1 0 0
6 SPO 4440 Ended no 1 0 0
7 UP2 4448 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 14 09:38:31 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 14 09:38:31 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 14 09:38:31 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:36 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >hanep7_EP7_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4384)
killing process (4384) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1408 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1408 (pos=2)
SiSelNRemove: removed sock 1408
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1408
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4352) (SOFT_KILL)
Stop icman
killing process (4360) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4352 HANDLE:1484)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4352 HANDLE:1484)
wait for end of icman
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:39 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:40 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:41 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:42 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:43 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:44 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:45 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:46 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:47 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4360 HANDLE:1488)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:48 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4360 HANDLE:1488)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
DpHalt: disconnect j2ee listener
DpHalt: wait for end of j2ee server
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:49 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:50 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:51 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:52 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:53 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:54 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:55 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:56 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:57 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:58 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:38:59 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:00 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:01 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:02 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:03 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:04 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4384 HANDLE:1468)
waiting for termination of J2EE server ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1513
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 14 17:39:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4384 HANDLE:1468)
DpStartStopMsg: send stop message (myname is >hanep7_EP7_00 <)
NiIMyHostName: hostname = 'hanep7'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jul 14 17:39:07 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1432 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1432 (pos=3)
SiSelNRemove: removed sock 1432
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1432
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Em2Cleanup: Cleanup EM2
Eg2Cleanup: Cleanup EG2
Es2Cleanup: Cleanup ES2
Es2ResLocSlotClear: clear slot 0
***LOG Q05=> DpHalt, DPStop ( 4144) [dpxxdisp.c 10421]
Good Bye .....Dear
This log does not give enough information imho.
Can you post the defaulttrace log of the J2EE engine also, it is located in /usr/sap/<SID>/DVEBMGS<instance number>/j2ee/cluster/server<number>/log/
Kind regards
Tom
Maybe you are looking for
-
How to use my Time Capsule with my Router?
My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580. I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get
-
How do i replace my 5c with a 5 or 5s
how do i replace my 5c with a 5 or 5s, there is nothing out there for cases or anything to match the button layout on the phone, i have spent $100 in 2 days buying case after case
-
After i do the run and you install something i forget what you call it a little box appears saying shall the computer user or the administrator have access. Nothing happens after that box appears and a selection is made
-
How do can i download the update of mac os x 10.6 from 5.8 version?
How do can i download the update of mac os x 10.6 from 5.8 version? I have not been able to find the DOWNLOAD for the Mac OS X Snow Leopard 10.6? Please give me help!!! I have been having a difficult issue.
-
I cannot scroll by running my finger along the mouse. I must move over to the sidebar and pull it down. My scroll setting is still turned on within system preferences. Is there a way to turn scrolling on within Firefox? Thanks.