NW 2004s Bex Analyzer Variable screen problem

Our BW system was upgraded from 3.1 to NW 2004s (SPS 8/FEP 9).
When we refresh the query in the workbook that has multiple queries, then the variable screen displays the variables from all queries.
For example: Query 1 has Posting Period single value variable, Query 2 - Posting Periods interval variable. When Query 1 is refreshed, the Variable input screen will display both variables - Posting Period single value variable and Posting Periods interval variable.
Please let me know if you need any further details and if there are any OSS notes available.
Thank you,
Elena.

Hello Prakash
In BW 3.5 we had, if we have a Workbook with more than one Query, while refresh, if our cursor used to be outside the Query area, then it used to ask "Do you want to refresh all Queries on Workbook", if we say, it used to refresh all the Queries, by Promting Variable Screen multiple times.
"Melt" kind of function in this case should help.
But do we have method to refresh one query of the sheet only and not rest of them. I am afraid you may say no. But thought to recheck at least once more.
Pankaj Gupta

Similar Messages

NW 2004s Bex Analyzer Variable screen Vs 3.X Bex Analyzer

Hi,
In 3.X, if you select refresh for a workbook having multiple queries, then the function refreshes all queries and the system displays the variable screen for each query in the workbook.
In NW 2004s, if i have the same workbook and refreshing the workbook will display only one variable screen having all the variables all the queries are using.
This is good. Except for refreshing workbook which is already having different "material number" in different queries.
In this scenario how do we refresh the workbook and keep the material number different for the queries the workbook is using. The variable screen in NW 2004s will show only one variable "material number" and assigning a material number will change the workbook
(Implies both the queries will be using same material number after refresh-hence unable to keep the workbook same)
We are on SPS 8/FEP 801.
We applied the note 953402 (variables are displayed when you refresh all queries)
After applying the note we added ANALYZER-VARIABLE_REFRESH_3X=X in the RSADMIN table.
Still in NW 2004s, only one VARIABLE SCREEN is displayed will all the variables the query is using.
Please let me know if any information is available.
Thankyou,
-Sini

Hi,
We applied to OSS NOTE # 953402 inorder to prompt the varaible like 3.X. This note did not do anything. Please advice if any other note is available or not.
Having a common or (one) variable screen is difficult to maintain. I had lot of problem trying to keep a workbook same as in 3.X. Diificult to perform workbook conversion.
Example:
I am performing workbook conversion. This workbook which I am trying to convert has multi queries.
In one query it shows material number starting with say for eg: BA, CB and no restriction is given for cal year/month and this query has plan version as mandatory variable. (NOTE: no hierarchy)
Other query has hierarchy for material number and the hierarchy shows material starting with BA01* and cal/year restricted to 01/2006 and 02/2006.
When I convert the workbook from 3.X to 2004s
1.) hierarchy drilldown icon disappears when I open the workbook in NW 2004s Analyzer
2.) Inorder to get the drilldown icon back I clicked on "refresh" which doesn't not work consistenly.
So I always click on "variable" icon and entered the values for the mandatory variable (plan version) and assigned hierarchy (XYZ).
3.) After executing it, both of my query shows hierarchy.
4.) I turned off hierarchy in one of query, set filter value for material number to BA, CB.....( NOTE: Inorder to turn off the hierarchy I have to first deactivate it and then refresh it to make it work.
NOTE: later I was unable to turn it ON.
5.) The other query has hierarchy orginally(before conversion) it has 3 level drilldown and after converting it just has only one level drilldown. ( I was not able to get the original one back. I was able to filter it my material number say BA01* and cal year.
RESULT: Unable to make the workbook indentical to 3.X. Conversion was not that succesfull.
NOTE:
1. The hierarchy activation/deactivation does not work properly.
2. For eg: Select filter value for material number, the text/key shows the expected value. But If I search for those values I do not get the result. The search on material with hierarchy does not seems to work properly.
Please let me know if you need any further details and also let me know if there any OSS Note available.
Thankyou,
-Sini

Bex analyzer variable screen input ready?

Hi Experts,
If we open a query in the Bex analyzer (BI 7.0 netweaver 2004s), it seems only possible for us to enter variables in the dialog screen after the pushbuttons Ctrl + K for each variable. Is it possible to change the default setting in the BEx analyser variable screen, so that the variables are ready for input (without the ctrl + k)?
In the SAPhelp information, only the following information is provided.
Prerequisites
In the BEx Analyzer, you have executed a query that contains variables and you want to change or personalize one or all of the variables in the query.
Procedure
1.      In the analysis toolbar, choose Change Variable Values or in the menu, choose BEx Analyzer ® Change Variable Values.
The Select Values for Variables dialog box appears. Follow the instructions to select a value to assign to the variable.
2.      Specify a variant name and values for the variables for which you want to change the current values.
Switch to display mode or use the pushbuttons Ctrl + K to enter values.
Kind regards
Dennis
Message was edited by:
        D.C.M. van den Oord

Hello All,
We have a similar issue only in 2004s query designer when we execute a query via the web. We have the variable set up to accept multiple single values and we can pick multiple single values and add them, however, we cannot paste a list of, for example, personnel numbers from an excel spreadsheet into the web selection box to add multiple single values at one time. Does this functionality exist?
Regards,
Ann Bohn

BEx analyzer variable screen Copy and paste the input values functionality

Hi all,
in bw 3.5 we have functionality on the variable screen we can do directly copy the values and paste in the input screen. But in BI 7.0 BEx analyzer I am not able to find it. Is it required to apply any patches?
Please guide me on this.
Thanks

Hello All,
We have a similar issue only in 2004s query designer when we execute a query via the web. We have the variable set up to accept multiple single values and we can pick multiple single values and add them, however, we cannot paste a list of, for example, personnel numbers from an excel spreadsheet into the web selection box to add multiple single values at one time. Does this functionality exist?
Regards,
Ann Bohn

BEx Analyzer variable screen not showing for user

Hello,
I have a BEx query that shows the variable screen to enter the query parameters when I run the query but when the user runs it, he is not given the variable screen and therefore cannot enter the variables. Both the user and myself are running the query in BEx Analyzer (Excel).
The user is new to BEx. Is there perhaps some security or role setting that needs to be changed? Something else?
Thanks in advance for your help!

Hi Paul,
I am also facing exactly the same problem as you were facing. Could you please tell, whether your problem got solved? If yes, then would you please provide the solution for the same?
Thanks in advance,
Sanjeev

BeX Analyzer Variable screen takes long time

Hello,
Recently migrated 3.5 workbooks/queries to 7x.
When clicking on 'Change Variable values' button, the variable pop up screen takes about 10 seconds to appear for some users.
It takes somewhere between 30-40 seconds for some users...
All users are in same patch level. In 3x all users were experiencing same time delays.
But from 7x it has got worse. Now we are on 730 release, Patch 7.
Searched forums and SAP Notes. Didnt get any good solutions.
Some said clearing %tmp% files helps. It works for 1 or 2 users only. Its not the solution.
Any other solutions please?
Thanks

The problem is not associated with the selection/results.
Problem is the time it takes to bring up the variable screen itself.
Thanks

Unable to Upload data from text file into BEx Analyzer selection screen

Hi,
No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file. I never faced same kind of issue when I am using BEx Analyzer 3.x. Please let me know I have to change any settings related to BEx or any other.
Thanks
Sri Krishna Ponnada.

Hello
It seems you are reaching the .NET memory limitation informed in note 1040454.
Because 3.5 does not use .NET it can work that.
Regards,
Ricardo

Analyzer variable screen location

Hi everybody,
Our BEx Analyzer users have been complaining about the location of the variable screen when opening certain workbook. The query used by the workbook has 18 variables and as a result, the lower part of the variable screen is located outside users display. Therefore users have to drag the variable screen up before they can click the "Check", "Cancel" and "OK" buttons. I know, it's a hindrance barely worth mentioning, but our users are really picky.
So, is there a way to change the position of the variable screen? I tried to find a workbook macro that would create the variable screen but apparently it is not generated with macros. Nore did I find anything from the workbook settings. Any ideas?
Regards,
Ran-Dom

Hi Paul,
I am also facing exactly the same problem as you were facing. Could you please tell, whether your problem got solved? If yes, then would you please provide the solution for the same?
Thanks in advance,
Sanjeev

Text in Bex analyzer is giving problem

Hi Experts
i have two issues with my Bex analyzer, RSRT and Portal
1. i have report which has Project code and its description (text) when i am runing this report for some project codes the text is not displaying instead it showing space, if i go to that particular project and say keep filter value and select only that value then its showing the text in that column...what could be the reason.
2. i have created variable for my report its displaying perfectly in bex analyzer but in rsrt and web portal...the variable screen is getting ignored.
what could be the reason.
thanks and regards
Sreedhar

Hi,
Check the behavior of your web template : parameter "display variable screen" must be ON.
Hope that helps.

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

BEx Analyzer Varibale screen cancellation results in inactive buttons

Hi All,
In my workbook when I cancel the variable screen pop up it results in an inactive workbook. That is, after the cancellation the buttons will not work. We cannot do any operation in it. We can only work in the workbook once we enter the design mode and exit from it.
SAP note 413448 says to upgrade patch. But it is for BW system and BW FEP version 2.0. We are on BI 7.0.
Is there any other alternative for this problem.
Thanks and Regards,
Jerry

jerryabap wrote:
Hi Arun Bala,
>
> We are currently on BI 7.0 SP 20. Moreover the note does not explain the error after cancelling varibale screen.
>
> Any other inputs please.
>
> Thanks and Regards,
Hm, Is it so. Could be some program error? As in Note 1424498 - BEx Web 7.0: Issues after Cancel in Variable Screen http://goo.gl/Dd8fw. Other option is to personalize the variables.You can check this post for more details. http://goo.gl/g4OQZ. Alternatively have you tried the following :-
1. In General Tab --> Refresh WB on Open (enable)
2. In Variables Tab --> Process Variables on Refresh (disable)
Thanks & Best Regards, @{

Bex Analyzer selection screen comes up blank

hi,
Users are facing a peculiar problem..The selection screen comes up blank when a user refreshes a report in the BEX Analyzer..But when I login and so the same on my system there are no such issues..Could be a GUI issue...Has anybody faced this before..Would be a great help if you could share your experience..
Thanks
VK

it has t be internet explorer settings go through each one of them and make sure they are exactly what is on your machine

Bex Analyzer Filter 0CALDAY problem

Hello,
We having a problem in our BEX Analyzer, when we are filtering the characteristic 0CALDAY with a interval range based in the last days of a month (Example from 21.03.2014 to 25.03.2014), the Analyzer shows the messsage error "For characteristic 0CALDAY, enter value in a permitted format". But if we put the range 01.03.2014 to 20.03.2014, the Query executes without problem.
The same occurs with other months either.
Examples:
Report:
Filter range 01.03.2014 to 20.03.2014:
Filter range 21.03.2014 to 25.03.2014 (PROBLEM):
The same filter, but in single values format:
Could anyone help me to solve this problem?
SAPGUI version 7.03 patch 7
BIAddon (Anlyzer) patche 6
Thanks in advance.

Corrected with the notes:
1935435 BExAnalyzer: Filter with range does not work correctly
1921770 BExAnalyzer: Filter works incorrectly
1914698 BExAnalyzer: General Filter Problems
Thanks

RRI variable screen problem

Hi Gurus,
I am facing a problem here I am using RRI there in RSBBS I have included two queries in One query. After I excuted query when I am trying to navigate to the another query which I have included it is giving me the variable screen i.e input selection screen.
I dont want to the variable screen to appear it should pich the characterstic on which I go for GOTO it should pick automatically.
How can I solve this?
Regards,
Sridhar

Hi,
In ur RSBBS-Assigments
The Infoobjcts shud be avaliable in both the Queries.
The objects for which u want to jump shud be avaliable as Input Variable ,in the assignments Make the same infoobjects which u want to jump from Query one to Query two as
TYPE-Infoobject instead of Generic.In the Field give as object name-Tech Name,say 0CUSTOMER,Selection Type as Paramters.
Come bak if u still have issues.
Rgds
SVU
Edited by: svu123 on Oct 26, 2009 10:46 AM

BEx Analyzer 7.0 Problem

Hi All,
I am using BEx Analyzer 7.0 in a new laptop assigned to me by my customer. It has windows xp and office 2003.
My SAP GUI is 710 version with patch level 11 and BI Add-on 800.
The problem what i face is, after opening Analyzer, when i am clicking on the open button, nothing is happening. No open window is coming. And none of the other buttons are working...
Also, when i hover the mousepointer over the analyzer toolbar buttons, the button name that displays is in German language.
Anybody has any clues about this issue?
Thanks in advance,
Regards,
BIJESH

Hi Bijesh,
Try this
Open a normal excel sheet --> Tools --> Macro --> Security
Select the low security level over there. Because of high security excel can not run macros.
Try this and let me know.
Regards,
Ajinkya

NW 2004s Bex Analyzer Variable screen problem

Similar Messages

Maybe you are looking for