NW 6.5 and DOS-IPX-Clients via IP-Router (IPX-Proxy)

Hi,
we`ve got new routers (Layer-3 switches) which don`t supports "IPX/SPX".
Unfortunatly we have some DOS 6.22 clients which use IPX to connect to our
Netware 6.5 Server.
These clients are difficult to change (maschines in production-line)
they have to load/ and save configuration files from the network.
Have you any idee, how can we manage this?
Is there a kind of IPX-Proxy which tunnels the IPX-packets in IP and
forwards it to the Netware server?
Thank you very much.
Lothar

Lothar,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Installing Lync 2013 and remove 2010 client via SCCM

We have Windows 7 x64 PC’s running Lync 2010 64-Bit client.
What I need to do is install the Lync 2013 32-Bit client and then uninstall the Lync 2010 64-Bit client.
Using the Office Customization Took, I am able to install the Lync 2013 client fine, however the 2010 client isn’t not removed.
Here is what I did:
-Have the standalone Lync 2013 installer.
I then copied the Lync 2010 64-bit install files into a new folder in the Lync 2013 source files.
This folder is c:\Lync2013\Lync2010
-Created MSP file using OCT set to never reboot.
-Under ‘Add installations and run programs’ option, I specified the Lync 2010 to be removed post install of Lync 2013.
The Command line: [post install] [INSTALLLOCATION]\Lync2010\LyncSetup.exe /silent /uninstall
-Loaded this into SCCM and set to run at a logon event.
As stated above, Lync 2010 is not removed.
A few questions:
Is this even possible using the OCT?
In the OCT, is it a problem trying to mix two different installers?
One 32-Bit, the other 64-Bit?
If not, then is the command line correct for the Lync 2010 uninstall?
If no for # 3, how do I make SCCM use the correct path to the package where the Lync 2010 install files are?
In the OCT, do I need to have the Lync 2010 command line as:
\%WINDIR%\SystemWOW64\CCM\Cache\nameofpackage
Please help me alleviate some frustration with any ideas for the above.

You can use the command msiexec.exe /uninstall “C:\Program Files (x86)\OCSetup\Lync.msi” to uninstall Lync 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I'll try this, thanks! For the post uninstall of Lync 2010 using the OCT, should I also ad /quiet switch or /no restart to suppress dialog boxes and not restart the PC when the removal is complete? Or will the OCT prevent it from being restarted
and 'suppress modals' as I set this during the install of Lync 2013.

Sending invoices and reminders to clients thru e-mail messages

Hi
I would like to know if there is a standard functinality in Receivables module to send invoices and reminders to client via e-mail?
I there is please inform where i can get some information, if not please advise in a few words how we can customise this .
Thx and regards
Ozlem

Hi shaun,
Payment advice is transfer to the external sytem. It means we need conectivity between 2 systems. I need to configure EDI settings. You need to contact the ABAPer and Basis consultant for your configuration.
Regards
Odaiah Pelley

True IP address for ARD remote client via IPObserver [newbie]

I have had success managing LAN clients via ARD, but now my situation is different.
I want to still be able to provide ARD support via a network address specific to a workstation from outside the LAN, and the IP address I have tried does not connect. I am deriving the address from the IP Observer utility that I had my client launch on their system. [it is not the obvious 192.168.1.xxx address from DHCP]. I have confirmed that the Sharing attributes are correct on the client system, although it might be a 2.2 version [running 3.1 admin]. Based on a test, I believe the IP Observer address is the internet IP location of the router [not the actual router LAN IP], not the client.
The IP address indicates that it is in the correct domain [Roadrunner, NYC], but the client-specific address is inaccurate. Is it because the client is setup through a DHCP router and switch? will they need a static IP? Can they somehow reveal their station-specific IP via an iChat connection log? should I try to address the client though a different port?
I am new to this extension of ARD, so bear with the obviousness of the query to some of you.
thx - steve

Hi, here is what you asked me for:
webvpn
enable inside
enable outside
csd image disk0:/securedesktop-asa-3.2.1.103-k9.pkg
svc image disk0:/anyconnect-win-2.2.0128-k9.pkg 3
svc enable
cache
max-object-size 5000
group-policy DfltGrpPolicy attributes
dns-server value X.X.X.X
dhcp-network-scope X.X.X.X
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
default-domain value XXXXXX
intercept-dhcp 255.255.255.XXX enable
nac-settings value DfltGrpPolicy-nac-framework-create
webvpn
url-list value Lan_Applications
svc keepalive none
svc dpd-interval client none
svc dpd-interval gateway none
svc ask enable default webvpn
customization value DfltCustomization
tunnel-group DefaultRAGroup general-attributes
authentication-server-group (outside) LOCAL
authorization-server-group LOCAL
authorization-server-group (outside) LOCAL
dhcp-server XXX.XXX.XXX.XXX
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group (outside) LOCAL
authorization-server-group LOCAL
authorization-server-group (outside) LOCAL
dhcp-server XXX.XXX.XXX.XXX
authorization-required
Best Regards,
Jeyriku

10.5.1 POP and Other Mail Clients

Does anyone else have problems with the Leopard Mail server and POP clients? For some reason, any client other than Mail.app does not work with POP, but they do with with IMAP. Thunderbird, Outlook, and even Yahoo and Gmail's POP clients do not work. The user logs in, and it looks like they have no new mail. In fact, there is mail and if you login via IMAP or with POP on Mail.app you will get it. This is a frustrating problem and I was hoping someone had an answer. This was a clean install of 10.5.1 server and migrated data from a 10.4.11 server.

You are not alone. I have started a current thread because of the same problem, http://discussions.apple.com/thread.jspa?threadID=1278072&tstart=0.
Another thread ended with the poster claiming to have things working after a clean install, but I have had no such luck with any of my installations so far.
Do you have only one domain on your server, or are you hosting virtual domains also?
/Lars

Problem in video capture at server and fetching by client

hi
I am doing final year project it has server at one end which is connected to video capturing device-webcam in my case
and the client is mobile.
I want the live video captured be transmitted to the mobile client on fetch video request.
I have tried implementing it but facing some problems so would like to know the reason behing and also ask if the way i am following is correct or not
At server end i tried to extract frame as follows:
//the datasource handler class is as follows
      * Inner class MyDSHandler takes the Output DataSource form the
      * Processor and extracts the frame from it.
      * It implements the BufferTransferHandler so that it can receive
      * Buffer from the PushBufferStream.
     public class MyDSHandler implements BufferTransferHandler
          DataSource source;
          PullBufferStream pullStrms[] = null;
          PushBufferStream pushStrms[] = null;
          //Buffer readBuffer = null;
          int i = 1, j = 1;
          * Sets the media source this MediaHandler should use to obtain content.
          * @param source the DataSource from the Processor
          private void setSource(DataSource source) throws IncompatibleSourceException
               // Different types of DataSources need to handled differently.
               if(source instanceof PushBufferDataSource)
                    pushStrms = ((PushBufferDataSource) source).getStreams();
                    // Set the transfer handler to receive pushed data from the push DataSource.
                    //pushStrms[0] since we need to handle only the video stream
                    pushStrms[0].setTransferHandler(this);
               else if(source instanceof PullBufferDataSource)
                    System.out.println("PullBufferDataSource!");
                    // This handler only handles push buffer datasource.
                    throw new IncompatibleSourceException();
               this.source = source;
               readBuffer = new Buffer();
          * This will get called when there's data pushed from the PushBufferDataSource.
          * @param stream the PushBufferStream obtained from the DataSource
          public void transferData(PushBufferStream stream)
               try
                    stream.read(readBuffer);
               catch(Exception e)
                    System.out.println(e);
                    return;
               if((readBuffer == null) || (readBuffer.getLength() == 0))
                    System.out.println("Null or Empty buffer encountered..");
                    return;
               // Just in case contents of data object changed by some other thread
               Buffer inBuffer = (Buffer)(readBuffer.clone());
               // Check for end of stream
               if(readBuffer.isEOM())
                    System.out.println("End of stream");
                    return;
                * we can apply frame control here by deciding whether to process
                * the frame or not
               processBuffer2(inBuffer);
          public void start()
               try{source.start();}catch(Exception e){System.out.println(e);}
          public void stop()
               try{source.stop();}catch(Exception e){System.out.println(e);}
          public void close(){stop();}
          public Object[] getControls()
               return new Object[0];
          public Object getControl(String name)
               return null;
           * Processes the Buffer , i.e converts it into an image and
           * transfer its content via Socket
           * @param inBuffer the buffer received from the PushBufferStream
          public void processBuffer2(Buffer inBuffer)
          {         //extracting frame from video and writing image on stream
               //RGBFormat format = (RGBFormat)inBuffer.getFormat();
               System.out.println(inBuffer.getLength());
               YUVFormat format = (YUVFormat)inBuffer.getFormat();
               Image img = (new BufferToImage(format)).createImage(inBuffer);
               BufferedImage bimg = (BufferedImage)img;
               if(bimg != null)
                    try
                          * encodes the image in the JPEG format and writes it to
                          * the socket
                         ImageIO.write(bimg, "jpg", clientOut);
                         System.out.println("Data Written to stream");
                         logArea.append("\n Image Data Written to Stream");
                    catch(Exception e)
                         System.out.println(e);
     }and how can one control the frame rate of the video like if i require the speed of 7 frames per second and the resolution
also
i am trying to convert the frame fetched to jpeg and at client , tried making use of jpeg image property by detecting the img start and end by reading the image data in bytes from the inputstream (0xffd8 as strt of image and 0xffd9 as end)
byte[] img_data = new byte[4*1024];//buffer to read and hold one image info
try
                while((data = dis.read()) != -1)
                    //System.out.print(Integer.toHexString(data));
                    if(data == 0xFF)
                        fm = true;
                    else if(fm)
                        if(data == 0xD8)
                            //start of the image
                            System.out.print("Start of image found : ");
                            //ctr should be zero at this stage here
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)0xD8;
                            ctr++;
                        else if(data == 0xD9)
                            //end of image
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)0xD9;
                            ctr++;
                            // consrtucting image from the byte[]
                            img = Image.createImage(img_data, 0, ctr-1);
                            if(img != null)
                                repaint();
                                System.out.println("Image drawn");
                            else
                                System.out.println("Image is null");
                                /*try
                                    Thread.sleep(500);
                                catch(Exception e)
                            ctr = 0; // ctr back to zero for the new image
                            //break;
                        else
                            //writing to byte[]
                            img_data[ctr] = (byte)0xFF;
                            ctr++;
                            img_data[ctr] = (byte)data;
                            ctr++;
                        fm = false;
            catch(Exception e){}
    }The problem i am facing is the client gets the black image just for a fraction of second and then the application hangs and no video is visible.
I have very little time left to complete this project as deadline is very close
please would be very grateful if guided timely.

equator07 wrote:
Thanks for the reply.
i saw in recent posts some protocols had been made use of like rtp i am not making use of any of these
will it effect?I can see that you're not using RTP... and "will it effect?" doesn't make any sense AT ALL...
is the way i have made use of jmf correct?There's no correct way to use an API... but no, you're not doing things in even remotely a "tradional" way...
*like the way i am extracting the frame,
and how can i set the resolution of the video taken by cam and adjust the frame rate?*I have no idea if your code works. I assume that you would have tested it, and proved it to either be producing a valid JPEG image or not. If you've not done that testing, then you obviously need to.
because i want live video to be seen at client end i am seriously confused and the progress as just come to an hault at this point and am in real need of guidance.You should probably be using RTP and the tradional way of using JMF then...
[http://forums.sun.com/thread.jspa?messageID=10930286#10930286]
Read through all of the links I gave the person on the above thread and you'll be on a lot better footing as far as using JMF goes.
shall i send the server side code.Till now server and client are both on local host.No, I don't need to see any more of your code. I'm not a proof reader, and I'm not going to debug it for you. Do you own work.

Deploying Lync 2010 client via SCCM

I am trying to distribute the new Lync client via SCCM (SCCM is not the problem here, this related to any software distribution product).
I am getting frustrated at the way the new client has been packaged - LyncSetupEval.exe in particular. Why can't Microsoft provide a simple MSI file?
I can run the LyncSetupEval.exe file with /Install /Silent, but this managed to crash OUTLOOK.exe when it runs. Also when it completes, it automatically starts communicator.exe in the SYSTEM context, meaning that unless you restart your machine, you
cannot run the Lync client in the user context.
Is anyone else having the same frustrations? I've played around with the files in the OCSetup directory, but there are of no use.

Hi Ryan,
Happy to share. I do a simple messy batch file / VB Script combination like this:
@echo off
ECHO Set wshShell = CreateObject( "WScript.Shell" ) >> usermessages.vbs
echo wshShell.Popup "The Microsoft Lync 2010 client is about to be installed. Please close Microsoft Outlook and Internet Explorer before clicking OK to continue.", 300, "Microsoft Lync 2010 installation" >> usermessages.vbs
ECHO WScript.Sleep(5000) >> usermessages.vbs
WSCRIPT.EXE usermessages.vbs
DEL usermessages.vbs /q
ECHO Installing Microsoft Lync 2010...
taskkill /F /IM communicator.exe
taskkill /F /IM outlook.exe
taskkill /F /IM iexplore.exe
LyncSetup.exe /Install /Silent
taskkill /F /IM communicator.exe
msiexec.exe /p OUTLOOK.msp /qb-!
office2007-kb936864-fullfile-x86-en-us.exe /passive /norestart
msiexec.exe /update Lync.msp /qb-!
ECHO Set wshShell = CreateObject( "WScript.Shell" ) >> usermessages.vbs
echo wshShell.Popup "The Microsoft Lync 2010 client installation was successful and can now be run from the Start Menu.", 300, "Microsoft Lync 2010 installation" >> usermessages.vbs
WSCRIPT.EXE usermessages.vbs
DEL usermessages.vbs /q
I'm sure it could be a lot nicer, there is no error passing or anything but it has served me well.
blog.danovich.com.au

Send XML and receive binary data via SOAP

Hi folks,
following idea (Client-Server-Rendering-Architecture):
1. Send XML as JavaScript variable via SOAP to the InDesign Server
2. Attached the XML String to a new document or template
3. Apply several XMLRules to the docuument
4. Render to document as JPG|PDF whatever
5. Transmit the JPG (means binary) via SOAP back to the client
Following problems raised by implementing this
1. Build a new XML-Object with new XML() works, but how to attach this object to the document, i've just found importXML() but from file, not string and xmlElements.add() for adding just a tag not a whole xml tree. The importXML() performance from a File object is not that fast ...
2. How to render a document not to a file with exportFile() but into a variable, object etc.?
3. How to send a binary object (from an object, a variable or File object if not possible as describe in Q#2) back to the client via SOAP (scriptResult)? Do I have to expand the WSDL (and|or C++ API), any examples?
Thanks for your help, by the way, the describe scenario is what I expect of a rendering server not more not less ...
Tino

for one thing, don't use == to compare strings... You have that all over the place, like:
if(currentElement=="region") {

Can't get username and password into client proxy

Hello all,
I am creating a client proxy using class xem_measurementImport (the doMeasurementImport method). I call this from an ABAP program, and it pushes measurement data into the EC (Environmental Compliance) system, which runs in Java. Everything has been running well, except for one thing. When I run the program in the foreground, it prompts me for a username and password, and when I run it in the background (it will be run that way in production), it gets a SOAP/authentication fails error message from the method, since username & password could not be supplied. I tried to recreate my client proxy, but when it is created, the wizard does not prompt me for my name & password, which it should do, so that it can supply it to the calling program via the logical port. Is this a configuration issue that Basis needs to address? Thanks for any help you can give.

gauravjlj wrote:
because client will install the mysql not me. and I need username and password for the further programming.
there is any file in mysql installation which can give me the username and password.
please tell me.
thanks
gaurav agrawalNo. If the "client" is installing the DB (and, I assume, administrating it, I.E. removing the large security holes that exist in the default installation), then why don't you simply ask the "client" for this info a dialog?
Otherwise, you should be providing a script in your installation package that modifies the DB to your needs, and instruct the "client" to install a "default" root password until after the script has run, and then to change the "root" password again. A Java application should definately not be worried about this stuff.

Target client is Productive and Protected againt client copy

Dear Team,
I have fresh install SAP R/3 4.7 with SQL .After installation I make new Client 110.
I login in 110 with sap* and password pass.
then via sccl i just for Client copy.this messege is comming that is "Target client is Productive and Protected againt client copy ".
Where is the problm. Plz help .
Thanks & Regards
jagdish Kumar

Maybe you have in production system in SCC4 the option
Protection: Client copier and comparision tool - Level 0 activated
Markus

Distribution to clients via Adobe Content Viewer

Hi, I'm new to the DPS world and I have a question regarding distribution of folios via the Adobe Content Viewer. Am I correct in thinking that I can create the folio and distribute it to a client via the Adobe Content Viewer? I have a folio that I wish to distribute to a small group of client (approx 12 iPads). They will utilize the folio for trade shows, meetings and presentations over an extended period of time. Many thanks. Paul..

Yes, just share it with them and make sure they all have verified Adobe IDs.
Bob

Installing client via gpo vs client push?

hello all
When it comes to pushing the sccm 2012 client does anyone have any thoughts on the pros and cons of pushing via gpo? We are exploring this as an option. We used client push in the past but wanted to give group policy a try. Just as a side note the sccm 2012
client is already on all of our clients and servers from a previous failed site deployment. So this would be a new client (same version CM12) and a different site code.
Thanks in advance!
Phillip
Phil Balderos

Hi,
I like to use Jason Sandys excellen startup script is executed as an startup script.. it provides much more control and many more features than using the .adm files which ships with SCCM 2012.
Compared to Client push there are many advantages as well, you don't have to open all the ports on the client, the script provides more features like wmi-check. It is a great resource.
http://blog.configmgrftw.com/configmgr-client-startup-script/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
Thanks guys!
Since the client is already installed on each computer with the old site code how will the install behave considering that piece?
Phil Balderos

I am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
Solved!
Go to Solution.

Hi thanks for the help.
Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
Attachments:
Client.vi ‏62 KB
Server.vi ‏252 KB

DPM 2012 - Get unprotected Clients via Powershell

Hey,
i want to get all unprotected Clients via Powershell (or SQL). In the DPM 2012 Console over the Management View it's easy to see, but i cannot find a cmdlet, so i want to create a Report about unprotected Clients.
Thanks in advance! :)

Ok. Ensure that where you execute the script you have the AD Powershell Module and use this script:
Import-Module ActiveDirectory
$computers = Get-ADComputer -Filter *
foreach ($computer in $computers){
$computerName = $computer.DNSHostName
$object = Get-WmiObject -ComputerName $computerName win32_service -filter "name='DPMRA'"
if ($object -eq $null){
Write-Host -ForegroundColor Red "The server $computerName has no DPM agent installed"
} else {
Write-Host -ForegroundColor Green "The server $computerName has the DPM agent installed"
You can improve it with log, etc... Tell me if it works :-)

Vonage email notifications and Apple Mail client

Vonage provides a very nice feature in which, as soon as someone leaves a voice mail message, Vonage sends out an email notification to up to five different email addresses, in addition to sending a text message to a cell phone alerting you that someone has left you a voice message on your Vonage phone. Besides getting just a text-based email notification, you can also opt to have Vonage attach a .WAV file to the email it sends to those email accounts you list in your account settings page on the Vonage web site. I think this is a great feature, because I have my iPhone set up to receive the text message, and I also configured my email accounts to receive the email notifications together with the attached .WAV file, so I can listen to the recorded voice mail messages right on the iPhone, without having to dial in to a Vonage number, or go to the Vonage web site to listen to the voice mail via a computer.
While the Vonage email notifications with the attached .WAV files arrive just fine in my mac.com and my aol.com email accounts, those same email messages are NOT being sent to my the roadrunner.com email account provided by Time-Warner cable, my Internet Service Provider.
When I brought this matter up the tech support people at Vonage, they theorized that the roadunner server might be blocking receipt of the emails sent by the Vonage server. However, the problem does not seem to be related to roadrunner.com, because those email messages actually do reside on the roadrunner server. I can see them all right, but only if I use a browser and check my messages via their Web Mail application. For some mysterious reason, my Apple Mail client is NOT receiving those messages, and I have no clue why that would be so.
Does anybody know what is going on here? Shouldn't Apple Mail be able to retrieve all the messages on the roadruner server? What could prevent Apple Mail from being able to do that? And, is there anything I can do to make those email notifications —with their attached .WAV files—show up in my Inbox in Apple Mail?
Since I thankfully receiving those email notifications at my mac.com and my aol.com accounts, this is not a mission-critical issue for me. It is merely one of one technical curiosity.
bowlerboy

To close out this thread, about all I can say is that the issue does not seem to be related to Apple software or to my Internet Service Provider. It is a Vonage issue that can only be fixed by calling Vonage tech support and getting their programmer/technicians to do whatever it is that they to do on their end to configure their Vonage email notifications to function correctly. If something sneezes, as it did in regards to my account, then Vonage tech support is the first place to call.
I'll consider this issue "answered" now.
bowlerboy_jmb

NW 6.5 and DOS-IPX-Clients via IP-Router (IPX-Proxy)

Similar Messages

Maybe you are looking for