NW 6 Backing-up an XP Workstasion Target server (24711)

Hi - I have been trying to enable backup of the internal drive of an XP (sp2) workstatsion to the central backup unit on our 2 server cluster. The backup software is Backupexec 9.1 and is on Server2 or the system.
I have enabled the TSA software on the XP workstation and it is running (Started) in the services section of the XP modules.
When I scan for new clients on Server2 via Backupexec it is detected, but when I try a sample backup of the Workstation through Backupexec I cannot login to the Workstation TSA from the Backupexec console.
ERROR - Unable to log into Server2 Workstation. Enter another user name and password (if I use any netware usernames), if I continue and use the station Administrator username/password I get:
ERROR Password Failure - press any key to continue
When I do this I can submit a backup job, which them fails with the ERROR Unable to communicate with the Target server (24711)

Originally Posted by joncy123
Hi - I have been trying to enable backup of the internal drive of an XP (sp2) workstatsion to the central backup unit on our 2 server cluster. The backup software is Backupexec 9.1 and is on Server2 or the system.
I have enabled the TSA software on the XP workstation and it is running (Started) in the services section of the XP modules.
When I scan for new clients on Server2 via Backupexec it is detected, but when I try a sample backup of the Workstation through Backupexec I cannot login to the Workstation TSA from the Backupexec console.
ERROR - Unable to log into Server2 Workstation. Enter another user name and password (if I use any netware usernames), if I continue and use the station Administrator username/password I get:
ERROR Password Failure - press any key to continue
When I do this I can submit a backup job, which them fails with the ERROR Unable to communicate with the Target server (24711)

Similar Messages

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to not run a gateway instance if the target server is down

I have a DirectoryWatcher gateway instance that runs every 10
min looking to do a series of actions when a file is added to a
directory on another server. This other server is down periodically
and my gateway instance fails. Then when the server comes back up,
I have to restart the gateway because it has failed. How do I tell
the gateway instance to not run if the server it is looking at is
down or the directory in this case is unavailable?

listeners have a timeout period. if the target computer is going through a reboot cycle, the downtime should be short enough that you can setup a timeout. Set one that is long enough so that you do not trigger a failure event, and the timepsan allows for the target server to come back online before the timeout expiration.
Another way that is more robust is to create a seperate application, perhaps one built on Visual Studio or even a scripthost that does a simple ping of the destination server every 10 seconds or so. When the server is not found, you can do a shutdown of your CF. (you can shutdown any application from another application). Once you can re-ping the server, relaunch your gateway listener. If the listener cannot support what you want to do, just write another program that will perform your logic for you.
People have it within them to change
Proud user of Adobe products, and webmaster of the Theravive counselor network , built on Dreamweaver, and Photoshop. Toss in a little Visual Studio, but who's keeping score!

How to sync the data between the two iSCSI target server

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks
There are basically three ways to go:
1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
StarWind Virtual SAN [VSAN]
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
DataCore SANxxx
http://datacore.com/products/SANsymphony-V.aspx
SteelEye DataKeeper
http://us.sios.com/what-we-do/windows/
All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
distributed cache implementations (RAM and flash).
2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
Configuring iSCSI Storage for High Availability
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
MSFT iSCSI Target Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
cluster. See:
Scale-Out File Servers
http://technet.microsoft.com/en-us/library/hh831349.aspx
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

How to data insert Source server and Linked server (Target Server) at same transaction

I have try several times for Data insert Source server and Linked server (Target Server) at same transaction. I am using Begin transaction. but Source server is completed and Linked server error (or Linked server Completed and source server
ERROR). at this moment I want ROLL back. how?

Hi
Run below query by changing to yourr linked server name and see if DTC is enable or not.. if not
Begin distributed transaction
select * from [ServerName].master.dbo.sysprocesses
Commit Transaction
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Using Time Machine to back up to a Windows 2003 Server

I am trying to set up my Time Machine to back up to a windows 2003 server share. I have found some hacks on how to do so, however i am not successful.
What I have done so far:
TMShowUnsupportedNetworkVolumes 1 in terminal, which got TM to see my shared drives, however, when i try to backup to my specific drive it gives me an error of not being able to write disk image. So i did:
hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle
using the appropriate mac address, volume name, and OSX computer name. However, when i run that in terminal, it comes back with a message saying it can only create one volume at a time.
I'm not quite sure where to go from here, I feel so close, but im stuck.
Also, on another side note, If I get this working, I would like to find a way where when TM is backing up data, it does not pop up the work bar window, I would prefer if it just worked in the background, and show it's status in the menu. I dont know if this is possible, But any suggestions would be of help
Thanks in advance!

AFreeman wrote:
Thanks for the response,
I understand the requirements for TM to work, and In the steps i've been trying, you'll see that the command 'hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle ' creates and HFS drive partition on my server share.
I guess i'm not looking for an answer as to why when i enter this command, I get a response of only one volume can be created at a time. Am I missing something in this command?
Thanks!
Since you are using a hack, and therefore in an unsupported area, I suppose anything possible.
You might browse around the TimeCapsule forum which more closely represents what you are doing than this forum
The TC forum is here:
http://discussions.apple.com/forum.jspa?forumID=1253
It's possible that it may be a limitation of the system, hack or no hack.

Unable to use the Freescale M5329EVB target server

Hi everybody,
I have created a new target on Labview embedded which is based on the Freescale M5329EVB example. The target is a powerpc from Xilinx and it runs a linux on it.
What I want to do is to use the "target server" from the Freescale example. I copied all LEP_plugin VIs of this target example and modified them to work with my target.
According to the porting guide, the target server needs a TCP connection, Telnet server and a TFTP client. I implement all of this on my embedded linux and test them. I can connect through telnet and get files through tftp from my linux host.
When I click on the "Download" command, the target starts, connects to the target through telnet and then tries to connect with TFTP. The problem is with the last one, it puts me a message "Awaiting target connection on port 69 ..." but it never connects.
I tried to look to the target server VI's but its quite difficult to understand. The problem seems to be located in EMB_Utility_TFTPD_Listen.vi at the UDP_Read function.
Also, when I netstat my windows, the tftp service is started, so port 69 seems to be opened. Netstat on my target tells me that my windows host is connected to it. The windows firewall is also disactivated.
If anyone has an idea on what's going wrong ...,
Thanks for your help,
François
Attachments:
pblm target server.JPG ‏30 KB

Hi, sorry for being long to answer.
I have two problems, one for the target server and the other for the debug mode.
In release mode, the executable downloads well and the execution is
good. The error "failed to execute program" comes from
"TargetServer_GetFileSize.vi". The "Match Pattern" box doesn't give the
right information (please see CheckFileSize.JPG). The problem seems to
come from the "file size regex" wire.
Then, if I skip the "checkfilesize" step, the program tries to connect
to the target, but it gives an other error : "Target not found". I set
breakpoints in the "nitargetStartTCPDebug.vi". The ip address seems
good (it's 10.0.0.213 converted in decimal) (please see
TargetNotFound.JPG and Debug.JPG). I wonder if there's a "HOST_IP" to
set in the compile argument or something else.
The other problem is when I try to compile a program in debug mode and instrumented debugging. It gives many errors :
" C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(Debug.o): In
function `SetDataToControl':
../../CCodeGen/libsrc/comms/Debug.c:496: undefined reference to `SetPictFieldValue'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(CCGTimeSupport_unix.o):
In function `DtToSecs':
../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:91: undefined reference to `PDAClusterGetElemByPos'
../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:92: undefined reference to `PDAClusterGetElemByPos'
../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:94: undefined reference to `PDAClusterGetElemByPos'
../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:96: undefined reference to `PDAClusterGetElemByPos'
../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:98: undefined reference to `PDAClusterGetElemByPos'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(CCGTimeSupport_unix.o):../../CCodeGen/libsrc/os/unix/CCGTimeSupport_unix.c:100:
more undefined references to `PDAClusterGetElemByPos' follow
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(NumText.o):
In function `NumToTextStatic':
../../CCodeGen/libsrc/blockdiagram/NumText.c:676: undefined reference to `StrResize'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(NumText.o):
In function `NumToTextExpStatic':
../../CCodeGen/libsrc/blockdiagram/NumText.c:1145: undefined reference to `StrResize'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(NumText.o):
In function `NumToTextEngStatic':
../../CCodeGen/libsrc/blockdiagram/NumText.c:1271: undefined reference to `StrResize'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(NumText.o):
In function `StrPadLeft':
../../CCodeGen/libsrc/blockdiagram/NumText.c:1407: undefined reference to `StrResize'
C:\Program Files\National Instruments\LabVIEW
8.5\Targets\NI\Embedded\unix\ml403TGTS\libs\libppc405rtd.a(NumText.o):
In function `StrPadRight':
../../CCodeGen/libsrc/blockdiagram/NumText.c:1431: undefined reference to `StrResize'
collect2: ld returned 1 exit status
I compiled the program with these arguments : -O0 -g -DCStatic
-DUsesTCPDebugger=1 -DTCPUDPSupport=1 -w -I. -DCHeadless=1 -Dlinux
-fno-strict-aliasing -fno-common -fomit-frame-pointer
and the run time librairies with : -DCHeadless=1 -DNoFileSupport
-DSocketSupport=1 -DTCPUDPSupport=1 -DCStatic -DUsesTCPDebugger=1
-D_Include_Scheduler -D_Include_OSScheduler -DPosixFiles=0
-DFileSupport=0 -DDatalogSupport=0 -DPalm5Earlier=0 -Wall -Dlinux
-D_LIB -fno-strict-aliasing -fno-common -fomit-frame-pointer -Wa,-Wa,
-Wno-pointer-sign
Thanks in advance,
françoisp
Attachments:
Debug1.JPG ‏79 KB
CheckFileSize1.JPG ‏78 KB
TargetNotFound1.JPG ‏40 KB

Error while updating Targets-Server : java.lang.reflect.InvocationTargetException

Hi,
I got this error below when i try to deploy my ejb.It's happen when i select the
targets-server in weblogic console. Can anyone help me please?
Thank you in advance.
Sukanya
java.lang.reflect.InvocationTargetException: javax.management.RuntimeOperationsException:
RuntimeException thrown by the invoke method of the Dynamic MBean
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
     at $Proxy10.addDeployment(Unknown Source)
     at weblogic.management.internal.DynamicMBeanImpl.updateDeployments(DynamicMBeanImpl.java:1516)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:895)
     at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:847)
     at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:295)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
     at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
     at weblogic.management.internal.MBeanProxy.setAttribute(MBeanProxy.java:322)
     at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:204)
     at $Proxy76.setTargets(Unknown Source)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.management.console.info.FilteredMBeanAttribute.doSet(FilteredMBeanAttribute.java:92)
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:135)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.management.console.utils.SetException: An error occurred while updating
Targets-Server on Proxy for mydomain:Application=Wallet,Name=wallet-ejb,Type=EJBComponent
- with nested exception:
[java.lang.reflect.InvocationTargetException - with target exception:
[javax.management.RuntimeOperationsException: RuntimeException thrown by the invoke
method of the Dynamic MBean]]
     at weblogic.management.console.actions.mbean.DoEditMBeanAction.perform(DoEditMBeanAction.java:151)
     at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:171)
     at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

Hi Sukanya,
Could you please tell me how u solved this error?
I am also getting the same error!!!
Sherry.

Error While Importing into The Target Server

Imported the export dump into the Target server.
while running the import I am getting the following errors in the Transport set Import log file.
13-JUL-05 15:00:11][ERROR] id = NULL context = style_pre_check user = ORCLADMIN The Unique Identifier of the source style KNPC_PORTAL does not match the target style KNPC_PORTAL
Precheck failed for the whole KNPC_Page group and HRMs page group.
Precheck failed for LOV REPORTS_COMPONENT_LOV
Precheck failed for RWSVR EISDB_REPORT_SERVER
Precheck failed for DYNAMIC DYN_0418073018
Precheck failed for DATAPTL COMPONENT1
Precheck failed for DATAPTL DATA_0418075629
Precheck failed for AREPORT DETAILS
Precheck failed for AREPORT EMPLOYEEDETAILS
Precheck failed for HIERARCH HIE_0604143208
Any help is highly appreciated
Thanks&Regards
Manoj
All the prerequisites carried out in the Target Server

The message
13-JUL-05 15:00:11][ERROR] id = NULL context = style_pre_check user = ORCLADMIN The Unique Identifier of the source style KNPC_PORTAL does not match the target style KNPC_PORTAL
indicates that a style with the same name has been created in target directly or imported from another instance (other than the one from which the transport set is attempting to import).
In order for pre-check to pass, you will either need to locate the object(s) in the target, rename (or delete) them and reattempt import, (or) rename them in source and reexport (recreate dumps) and import the new transport set.

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

Deploying Custom Workflow to different target server

Hi!
We are trying to build a custom approval workflow and deploy it from my development machine which has SharePoint Foundation to a beta server which has SharePoint Enterprise.
Does the deploy & development have to be done via Visual Studio on the server that will receive the deployment?
The error message below sounds like it's pointing to that scenario.
We are getting this error message on initial "Validate" of the SharePoint server when creating the project and when trying to apply a target list to the project:
Cannot connect to SharePoint site:
...make sure the Site URL is valid, that the SharePoint site is running on the local computer, and that the current user has the necessary permission to access the site.
I do see this thread which doesn't seem as though it's a supported approach:
http://social.msdn.microsoft.com/Forums/en-US/489047d1-ac1a-4325-81ef-596ba6dd59d3/remotely-deploy-a-custom-workflow?forum=sharepointcustomizationlegacy
Please advise if I should be doing development and deploy via Visual Studio on the target SharePoint server.
We would like to be able to avoid this scenario, and do all development from our own machines and not need access to the target server.

Hi,
According to your post, my understanding is that you want to deploy a custom workflow remotely.
If your workflow solution does not need to use the farm-level objects, we can use sandbox solution achieve it.
We can create a sandbox solution workflow in Visual Studio 2012 use SharePoint 2010 template, and deploy remotely.
http://blog.credera.com/custom-application-development/new-visual-studio-2012-features-for-sharepoint-developers/
http://msdn.microsoft.com/en-us/library/gg615449(v=office.14).aspx
If you workflow solution is a farm solution, we can use PowerShell Remoting
to deploy it to the server.
http://community.rightpoint.com/blogs/viewpoint/archive/2011/06/19/tfs-2010-amp-sharepoint-2010-automated-build-and-deploy-remotely.aspx
http://spsd.codeplex.com/
Best Regards
Dennis Guo
TechNet Community Support

Trying to create reference for application in target server failed;

I have an ear file that I am trying to deploy using the "Deploy Enterprise Applications/Modules" page on the console.
The console gives me a message saying
"Trying to create reference for application in target server failed; Application tsom_oes is not found in config context"
tsom_oes is the name of my application, or it was. I've changed every instance of that name I can find and still it tells me it is looking for tsom_oes.
Can anyone tell me just what is looking for it and where it is expecting to find it?
I ran the verifier on the ear file and it did give me some errors, although none of them seem to relate to this. Specifically it told me it did not like the xml in a tld file I'm using
and it seems to think Hibernate needs a bunch of JBoss classes (none of which are referred to by my app anywhere). I'm guessing the verify is mistaken on those, but if anyone knows better I'd like to hear
Meanwhile I don't know why it won't deploy, nor why it is still looking for tsom_oes.
One more thing I must add: this ear file exposes portlets which I am hoping will be accessible through the portal server. The ear file works on JBoss, but I have added what I think are the necessary sun xml files to make it run here.
By 'exposes portlets' I mean that I have created a sun-portlet.xml and implemented the appropriate interfaces (all of which work on JBoss).
Environment:
Sun App server 9.1 plus portal server 7.2 on Windows XP

Okay, I found the answer. I had hacked the domain.xml for this some time ago (this task has been off and on a lot) and forgotten.
I found the tsom_oes reference in there and removed it. Now it deploys.
Hopefully this helps someone else some day... probably not though, eh?

OSB Cluster: Defining target server for mailpoll failed (Weblogic 10.3.3.0)

Hi!
Deploying is fine without email polling. But with email polling proxy service deployed (Eclipse OEPE) fails with the errormsg:
*[WliSbTransports:381611]Poller target server should be specified in case of cluster domain.*
To solve this problem, I've tried to set the target server but not found in weblogic console. The domain created with Configuration Wizard.
The cluster consists of two managed servers + loadbalancer + adminserver.
Topology: http://img140.imageshack.us/img140/6128/mozscreenshot69.png
BEA-381611
Error: Poller target server should be specified in case of cluster domain.
Description
Poller target server should be specified in case of cluster domain.
Action
Make sure that the File proxy configuration has one of the managed servers as poller target server if it is running in the cluster.
Edited by: shuttle on 2011.01.21. 4:14

Select the managed server in "Managed Server" setting in E-Mail Transport Configuration Page on sbconsole (of your proxy)
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/transports.htm#i1268939
Regards,
Anuj

Configuring AGENT on target server

Hi,
Actually i have installed client components on my system....and ODI server component(agent) on my target instance.....now how can i configure the agent on my target server so that it can be used my multiple users.....how can i create a scheduler agent on my target server to be used from multiple cleint machines for scheduling.......
say i have started the my agent on target server......do i have to eidt the odiparar.bat file on the target server also.....
Thanks in advance....
Edited by: user4315565 on Jan 26, 2010 1:52 PM

cezar,
Yes..i will create a logical agent pointing to the scheduling physical agent....
for physical agent: do i have to run the agent first or create it in topology manager first....
1) first run the below script on SRV1.
agentscheduler.sh -port=20911 -name="MY_SCHEDULER_AGENT"
2) create a physical agent in topology manager with same name:
Name = "MY_SCHEDULER_AGENT
Host : IP address of SRV1
Port = 20911
sessions = 10(as requiored)
and test the connections...
3) configure Odiparam.sh file on SRV1 with master and work rep details....
3) create logicla agent and point to MY_SCHEDULER_AGENT we created....
are these steps correct ...i am confused between steps 1 and 2 which one to complete first.....is it 1 and 2 (or) 2 and 1
Thanks
Edited by: user4315565 on Jan 27, 2010 8:31 AM

Total Server Memory and Target server memory

Hi All,
SQL server 2005
Installed Memory 63gb
SQL server maximum memory is restricted to 32 gb
Target Server Memory (KB) 33554432
Total Server Memory (KB) 33554432
SQL Server Buffer Manager
Counter Value
Buffer cache hit ratio
5792
Free list stalls/sec
806
Free pages
64040
Lazy writes/sec
423858
Page life expectancy
883
Please let us know above settings means any memory pressure and let us know what be the best practice to avoid memory pressure if there is any.
Regards,
Shiva
Grateful to your time and support. Regards, Shiva

Hi,
some of the values you posted are no logical. but let's go over the values as you posted one by one:
* page life expectancy: number of seconds a page will stay in the buffer pool without references.
883 seem to be OK, but not very high (more then 14 min)
* Buffer Cache Hit Ratio: Percentage of pages found in the buffer cache without having to read from disk. The ratio is the total number of cache hits divided by the total number of cache lookups over the last few thousand page accesses.
  I dont know how you got this value above 100%.
  I would suggest to use PERFMON to check the value, or this query:
SELECT (a.cntr_value * 1.0 / b.cntr_value) * 100.0 as BufferCacheHitRatio
FROM sys.dm_os_performance_counters a
JOIN (SELECT cntr_value,OBJECT_NAME
FROM sys.dm_os_performance_counters
WHERE counter_name = 'Buffer cache hit ratio base'
) b ON a.OBJECT_NAME = b.OBJECT_NAME
WHERE a.counter_name = 'Buffer cache hit ratio'
* Free list stalls/sec: frequency with which requests for available database pages are suspended because no buffers are available. Free list stall rates of 3 or 4 per second indicate too little SQL memory available.
806 is extrimly high value, look very bad! It should be around 2
* Lazy writes/sec: tracks how many times a second that the Lazy Writer process is moving dirty pages from the buffer to disk in order to free up buffer space.
423858 is extrimly high value, look very bad! It should be less then 20
** I have a feeling that you do no red the data currectly. Please check this link:
http://www.sqlshack.com/sql-server-memory-performance-metrics-part-5-understanding-lazy-writes-free-list-stallssec-memory-grants-pending/
** Go over this link as well :-)
http://www.grumpyolddba.co.uk/monitoring/Performance Counter Guidance - SQL Server.htm
[Personal Site] [Blog] [Facebook]

NW 6 Backing-up an XP Workstasion Target server (24711)

Similar Messages

Maybe you are looking for