NW 7.01 upgrade to 7.3 (BW) - Error: Unknown language short name Z2
Hello,
While upgrading a BW system to NW 7.3, in phase PREP_CONFIGURATION/LANG_SELECT I get the error:
Unknown language short name 'Z2'
and the upgrade cannot continue. The Z2 language is supplemented with English and is working properly in the system.
It is only used so that some BI reports to be presented in that language. It is not a correspodence language. Simulation in transaction i18n reports no errors.
Since no objects are translated in this language, I also thought to remove the language during the upgrade and import it after.
However, even this approach was not possible, since I do not get any screen in the upgrade GUI in order to be able to remove Z2 language. Also searched for Notes and in SDN, but no one seems to have faced such an issue.
The system is a standalone development NW 7.01 SPS 8 in Windows 2008 R2 SP1 with SQL 2008 R2 SP1.
Any help or ideas appreciated.
Thank you,
George.
Hi Sunny,
I do not have any translations to save. Nevertheless, I exported the language before starting the upgrade with SMLT_EX.
I get the error and the upgrade stops. I do not get any screen to remove the language.
Regards,
George.
Similar Messages
-
When l want to upgrade in Appstore a message tells me that this update is available for another account...but not for mine !
l think that this upgrade is part of a upgrade for OS Lion because l did not bought iPhoto in the appstore.You must get help from App Store support. They are the only people who can help with this.
Regards
TD -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
ECC 6 SR3 upgrade I am getting following error at RSVBCHCK
2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50). I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content. I've uninstalled and reinstalled iTunes but it's made no difference. Any ideas how to fix please?
Disable your firewall/security software.
-
ISA550 After upgrade 1.2.17 many error messages in the log
Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
ClausHi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42 Error System sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22 Error System sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22 Error System sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42 Error System sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22 Error System sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22 Error System sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43 Error System sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43 Error System sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43 Error System sdsd: tcp_connect: Couldn't connect socket, errno = 1 -
When upgrading quicktime, I get an error code: -3, and itunes will not run.
when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?
i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...
-
After buying a second-hand laptop running Snow Leopard, I made mistake of upgrading software, creating mail accounts, Safari preferences, etc., before noticing that the account name was "user". I want to replace this Admin account with my own short name, but can't seem to do it without completely reinstalling Snow Leopard. If I do this, will I lose everything I have done already? Thanks in advance,
DRJKurt,
I have a question about that link....it said to change the name of the folder in the way you would change any folder....
There is where i am having the problem....I just got a mac and i am having windows withdraw...b/c i don't know how to do jack.......
When i have my finder window open and look under places i see the house icon with the (i assume) user's short name.....this will not let me rename this......Is there a reason why???
Thanks..
Daniel -
CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal
I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and ApacheHi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks. -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.
Try using one of these video players. VLC usually works with most files.
Video Player - Divx
Video Player – Flip4Mac
Video Player - VLC -
After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recordings
After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.
HI,
In Message Menu > Preference > Accounts you should at least have the iMessage Account (Which is Enabled) and th Bonjour one that most likely is not.
After that if you had iChat type AIM valid Screen Names or Jabber IDs in an earlier OS then the System Preferences > Mail, Contacts and Calendars should list them and have them set to be used with Messages.
There is a vague chance that you have not set these up yet (you can do it in Messages or Mail, Contacts and Calendars)
Once you have a t least one other "Account" other than th iMessage one in Messages then the Buddy List option will appear next to CMD and 1 in the Window menu list.
NEXT
If you go to the General Section of the Messages Preferences you can unlink several Buddy lists if you have them (By default they are shown as one gathered Buddy list)
I Have several Accounts logged in (AIM valid and Jabber ones)
Uploaded with Skitch!
And I separate them in to individual lists which then gives me this in the Window Menu
Uploaded with Skitch!
8:06 PM Thursday; August 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist
Contact serial number support by web chat.
Mylenium -
Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?
There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)
Maybe you are looking for
-
when I got to the add-on site and try to download an add-on it says I have version 3,5,3 and it is not compatible. Tough I recently updated to 6.0.2. When I open the about window I can see I have 6.0.2 version.
-
Should I reinstall Lightroom and if so, how do I not lose my work?
I have Windows 8 and Lightroom 5.7 installed on my desktop. Every since I did the last update, Lightroom has been acting really weird. I often get a "Lightroom Not Responding" message, or it will take for ever to do something like move from library
-
Forcefully Mailbox database remove
When i am removing the mailbox database. following error is shown [PS] C:\Windows\System32>Remove-MailboxDatabase -Identity Mailbox Database 1853738799 Creating a new session for implicit remoting of "Remove-MailboxDatabase" command... New-PSSession
-
C30 mSATA port: SATA2 or SATA3?
Hi All, I have installed a Crucial M500 480GB SATA 6Gbps mSATA Internal SSD on my Thinkstation C30. However Intel Rapid Storage Technology (12.9.0.1001) is reporting that the SATA transfer rate is 3Gb/s: CrystalDiskInfo 6.0.1 is reporting "SATA/300 |
-
Calling parent method from within child object
Hello, A quick question! Is it possible to call a method in a parent object from within a child object.By child object I mean an object that was instantiated within the parent object. Thanks.