Nw 7.4 Java No DBACOCKPIT

I just installed a brand new NW 7.4 PO installation. Of course its Java only.
This is running on Sybase ASE.
So I wanted to run DBACOCKPIT, I cannot seem to find it. All the documentation I see leads me to believe its only an ABAP/Webdynpro program.
Meaning I need an ABAP engine to call it.
My problem is, the only sybase in my landscape is for my PO install.
And as of NW 7.4, SAP no longer supports dual stack.
Can anyone help me with this?

Hi
Could you refer the SAP Note for Remote admin
1532253 - SYB: Remote DB Monitoring for SAP Sybase ASE
1265134 - DBA Cockpit: Connecting a remote database
BR
SS

Similar Messages

DBACockpit Configuration - Remote Database backup of Java Stack.

Hi All,
I am configuring remote database backup of my SAP Java stack system.
I have successfully connected the system in dbacockpit. I have gateway installed also on the remote host system. but Database scheduling on DB13 failed.
On the OS of CEN system, I can connect to the host system of the remote using the OPS$ logon and i.e
sqlplus /@SID as sysdba - (It connected, to confirm i querried the v$instance I was also able to shutdown the remote system)
E:\>sqlplus /@SID as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed May 18 15:37:46 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
But when I ran the brtools to perform the backup I got this error.
"BR0301W SQL error -12560 at location BrDbConnect-2, SQL statement:

Hi Niyi,
This is a TNS error. The system is not able to connect TNS by using br*tools.
Firstly, check your environment variables. They should be as same as java system environmnt variables.
Secondly, check the link below;
[BR0301W SQL error -1017;
You need to create a synonym and SAPUSER table for the gateway installation <sid>adm user on Java database. By doing so, br*tools will be able to connect to the java database.
Best regards,
Orkun Gedik

DBACOCKPIT DB administration of NW AS Java instances

Hi all,
I am trying to configure my DBACOCKPIT which is running on the Solution Manager, to administer 2 SAP NW AS JAVA systems running in my Landscape.
So far I have managed to establish the DB connection which are tested successfully.
However when I for example try to run a DB13 through the COCKPIT for the 2 Java DBs I get the error:
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
I then check in SM59 the automatically created RFCs for the 2 systems. Of course they are failing and to my understanding this is happening because no SAP gateway is running on a NW Java Stack. The entries in the RFCs are empty and even if I try to give the hostname of the target system (I leave gateway service empty) the error is referring to the local location of Gateway, the maching hosting the solution manager.
As far as I can consider, I need to install SAP Gateway instances on the target Java Instances. Is this correct?
Is there any other alternative to achieve the functionality of the RFCs?
Kind Regards,
Loukas

Thanks a lot Juan for the reply. So I guess it is rather obvious that I should install the standalone SAP gateway.
Kind Regards,
Loukas

How to Schedule Java statistics job

Hi All,
We have a installed a NW07 Portal system on one of the unix boxes.Now we would like to run the oracle statistics on the same. Since there is no ABAP stack, we can't schedule the same thru db13. Is there anyway we can run the same.
Can I configure the Java statistics jobs for this from the central solution manager using the DBACOCKPIT.
Can somebody tell how to do this??
Thanks for the help.
Regards
Ravi

Ravi,
Chek out the Following SAP Note as well as the PDF's to accomplish the task.:
Note 1027146 - Database administration and monitoring in the DBA Cockpit
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/107aa3f5-2302-2a10-f990-b4d2af1aaca0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1062428c-f1df-2910-b08f-c322feddcd10
Regards,
Karthick Eswaran

Schedule Backup in Web AS Java System

Hi
Can anybody tell me how to schedule DBA Activities (Like Database, Archive Log Backup) on SAP Java System as we do in ABAP System through T Code DB13 or DBACOCKPIT
Regards
Soumya Dasgupta

Hi Warren
Thanks for your reply. I have followed that Notes. But I got stucked in the middle. Actually I am trying to connect our EP System (Which in a Java System only) to the ECC System (ABAP) for scheduling Backup Jobs and other DBA Activities through DBACOCKPIT. I am trying to add Remote System from the dbacockpit -> System Configuration -> Add Systems as follows
1. System : SID of the Remote System
2. Select Database Connection under the Remote System -> Create
3. Connection Name : Oracle
4. Database System : Oracle
5. User Name and Password : Oracle User Name and Password of Remote System
In DB Configuration Under Parameter I have given the TNS Name of of the Remote Database System.
Can you please validate the above details. Because after saving this enties I cannot run a successful test. Error : ORA-12154: TNS:could not resolve the connect identifier specified.
Pleaes help
Regards
Soumya Dasgupta

Is there anything similar to DB13 in a JAVA only stack?

If I have an isntance that is not ABAP, and only JAVA, is there anything similar to DB13 that I can run?

No - but you can connect an ABAP system with DBACOCKPIT to the Java instance.
Markus

Oracle DBA Tools for NW Systems ( ABAP +JAVA)

Hi,
We have installed PI/XI ( ABAP + JAVA). i have the following questions.
1)Like SE11, is any tool SAP supplies to maintain JAVA dictionary objects( belonging to SAPSR3DB)?.
2)Like ST05->Analysis of SQL statement, is any tool SAP supplies to get the explain plan for SQL statements related to SAPSR3DB tables?.
3)Apart from BR* tools and DBACOCKPIT, what are the SAP tools available for administrate Java(Oracle) dictionary objects?.
Thanks in advance.
Thanks.
Raj.

Hello Raj,
1) No there isn't any tool like that as far as i know
2) You can perform a SQL trace with the OpenSQL monitor or the Wily Interscope agent (which i would recommend). After you have identified the expensive SQL statements you can perform an EXPLAIN PLAN in SQL*Plus or Oracle SQL Developer (free tool). The Java stack is not so comfortable as the ABAP stack in this area.
-> http://help.sap.com/saphelp_nw04/helpdata/en/24/d4ff0eccf33a49a5c26a280a119b14/content.htm
3) I don't know any ... in a Java Stack you need to know what you are doing.
Regards
Stefan

DBACOCKPIT for SQL DB

Hi !
We're running the Managed System Config for a Java NW 7.4 SP 7 system on Solman 7.1 SP12.
In the DB extractor step, I see the below error as a result of which DBACOCKPIT Monitoring also stops working.
(The Monitoring from DBACOCKPIT works when we enter the parameters in Step 4 & select create DB connection...but after a few minutes, due to this extractor issue it probably stops)...
Both Solman & the satellite system have their DB'S under one named SQL 2012 instance.
I've tried to run the scripts manually from DBACOCKPIT, but it gives me the below error:
The DBACOCKPIT connection still works...its only the Monitoring part that's affected.....
Please help advise....
Thanks a lot !
saba.

Hi Guys,
Thanks a lot for the help
I'm a little finicky about implementing Note 1963503, since DBACOCKPIT monitoring for other connected systems works well from Solman.
The only difference is this is a Java stack.
I've entered the below details in MSC:
Where Monitor login name is: SID_SAPMonitor.......
Am I doing something wrong ?
Thanks !
saba.

DBACOCKPIT configuration in diagnostics

Hi,
We are trying to configure DBACOCKPIT in Diagnostics.
Solution manager is on AIX / DB2 where as managed system is on Windows / MSSQL ( AS JAVA system ).
Now note 1388700 Limitation section says
The Solution manager application server used for DBA cockpit must run on a microsoft Windows server operating system
Does that mean above secenario is not supported.
Best Regards,
Tushar

Thushar
the Note you have given is exclusivly for MS SQL this implies Windows. I am not aware of any DBACOCKPIT limitation to Windows only
Nesimi

Error while running a Java Program

Can anyone help me,
I am getting the following error while running a Java program, Below is the exception thrown, please help.
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RESummer1.run(RESummer1.java:505)
java.nio.BufferOverflowException
at java.nio.Buffer.nextPutIndex(Buffer.java:425)
at java.nio.DirectByteBuffer.putChar(DirectByteBuffer.java:463)
at org.jetel.data.StringDataField.serialize(StringDataField.java:295)
at org.jetel.data.DataRecord.serialize(DataRecord.java:283)
at org.jetel.graph.DirectEdge.writeRecord(DirectEdge.java:216)
at org.jetel.graph.Edge.writeRecord(Edge.java:288)
at com.tcs.re.component.RECollectCont.run(RECollectCont.java:304)

Ok, let's see. Write the following class:
public class Grunt {
public static void main(String[] args) {
System.out.println("Hello Mars");
}Save it as "C:\Grunt.java", compile by typing:
javac c:\Grunt.javaRun by typing:
java -classpath "C:\" GruntDoes it say "Hello Mars"? If yes, go back to your program and compare for differences (maybe you used the "package" statement?).
Regards

Erro de SYSFAIL e Queda do Ambiente JAVA (PI)

Bom Dia
Estou num projeto de NFe e atualmente esta acontecendo o seguinte cenário de Erros:
    Na SMQ2 , quando apresenta um aumento nas filas de Mensagens , aparece SYSFAIL em determinadas Filas , todas as outras travam , aumenta o numero de Filas.
   Com essa mensagem de SYSFAIL nas filas , o serve0 (Parte JAVA do PI) cai e após isso estou tendo que efetuar manualmente um STOP/START em todos os canais de comunnicação para que os R/3 voltem a emitir NFe.
    Isso esta ocorrendo com mais frequência após inserir uma nova empresa para emissão de NFe.
    Alguem poderia me ajudar a entender por que ocorre o SYSFAIL as mensagens travam e derruba o ambiente JAVA ?
Sérgio.

1º) Erro: Commit Fault: com.sap.aii.af.rfc.afcommunication.RfcAFWException:SenderA
2º) Foi alterado o numero de Filas O numero de Filas foi alterado , mas não consigo ver esse parametros na RZ10 , tem 3 entradas : X32_DVEBMGS32_NFISAP ; DEFAULT ; START_DVEBMGS32_NFISAP nessa transação ...onde eu vejo isso
3º) Esse parametro não tem nessa transação (/usr/sap//DVEBMGS00/j2ee/cluster/server0/log/). em qual desses diretórios abaixo eu encontro esse parametro ?
Existe esses:
DIR_ATRA      /usr/sap/X32/DVEBMGS32/data
DIR_BINARY      /usr/sap/X32/DVEBMGS32/exe
DIR_CCMS      /usr/sap/ccms
DIR_CT_LOGGIN    /usr/sap/X32/SYS/global
DIR_CT_RUN              /usr/sap/X32/SYS/exe/run
DIR_DATA              /usr/sap/X32/DVEBMGS32/data
DIR_DBMS              /usr/sap/X32/SYS/SAPDB
DIR_EXECUTABLE /usr/sap/X32/DVEBMGS32/exe
DIR_EXE_ROOT     /usr/sap/X32/SYS/exe
DIR_GEN              /usr/sap/X32/SYS/gen/dbg
DIR_GEN_ROOT    /usr/sap/X32/SYS/gen
DIR_GLOBAL        /usr/sap/X32/SYS/global
DIR_GRAPH_EXE /usr/sap/X32/DVEBMGS32/exe
DIR_GRAPH_LIB   /usr/sap/X32/DVEBMGS32/exe
DIR_HOME             /usr/sap/X32/DVEBMGS32/work
DIR_INSTALL        /usr/sap/X32/SYS
DIR_INSTANCE     /usr/sap/X32/DVEBMGS32
DIR_LIBRARY      /usr/sap/X32/DVEBMGS32/exe
DIR_LOGGING     /usr/sap/X32/DVEBMGS32/log
DIR_MEMORY_INSPECTOR   /usr/sap/X32/DVEBMGS32/data
DIR_ORAHOME       /oracle/X32/102_64
DIR_PAGING                            /usr/sap/X32/DVEBMGS32/data
DIR_PUT                            /usr/sap/X32/put
DIR_PERF                            /usr/sap/tmp
DIR_PROFILE      /usr/sap/X32/SYS/profile
DIR_PROTOKOLLS     /usr/sap/X32/DVEBMGS32/log
DIR_REORG                          /usr/sap/X32/DVEBMGS32/data
DIR_ROLL                          /usr/sap/X32/DVEBMGS32/data
DIR_RSYN                            /usr/sap/X32/DVEBMGS32/exe
DIR_SAPHOSTAGENT     /usr/sap/hostctrl
DIR_SAPUSERS     ./
DIR_SETUPS                           /usr/sap/X32/SYS/profile
DIR_SORTTMP     /usr/sap/X32/DVEBMGS32/data
DIR_SOURCE     /usr/sap/X32/SYS/src
DIR_TEMP                           /tmp
DIR_TRANS                           /usr/sap/trans
DIR_TRFILES                          /usr/sap/trans
DIR_TRSUB                          /usr/sap/trans

Starting deployment prerequisites: error in BI-Java installation sapinst

Hi all,
We are in process updating Bw 3.5 to BI 7.0 we hace sucessfully completed the Upgrade but while installing Bi java thru Sapinst in third step like java instance installtion i was stck with the below error.
We have downloaded the Cryptographic file and placed in jdk folder still the same problem is coming.
Please suggest...
Thanks,
Subhash.G
Starting deployment prerequisites:
Oct 13, 2007 2:42:18 AM Error: Creation of DataSource for database "BWQ" failed.
Original error message is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
Stack trace of original Exception or Error is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..

Problem solved followed the notes 1063396.

If Statement in java.awt paint

import java.applet.Applet; //bring in the applet class
import java.awt.*;             //bring in the graphics class
import java.awt.event.*;      //bring in the event class
import java.text.DecimalFormat;    //bring in the decimal format class
import java.lang.Float;       //bring in the float class
public class Bmi extends Applet implements ActionListener {   //begin program and start ActionListener
Label weight, height;    //define Label variable
TextField weighttext, heighttext;    //define TextField variables
Button calculate;     //define button variables
float index, wt, ht, max, min;    //define float variables
DecimalFormat fmt2 = new DecimalFormat("#.00"); //set decimal format for reals
public void init() {    //begin init()
weight = new Label("Please enter your weight in Kg. (2 decimal places): ");   //define content of Label weight
weighttext = new TextField(6);            //define size of TextField
height = new Label("Please enter your height in Metres (2 decimal places): ");   //define content of Label height
heighttext = new TextField(5);    //define size of TextField
calculate = new Button("Calculate!!");       //define content of Button
add(weight);      //add Label weight to the GUI
add(weighttext);   //add TextField weighttext to the GUI
add(height);      //add Label height to the GUI
add(heighttext);     //add TextField heighttext to the GUI
add(calculate);        //add button calculate to the GUI
calculate.addActionListener(this);    //wait for button to be returned
wt = 0;     //reset wt to 0
index = 0; //reset index to 0
ht = 0;      //reset ht to 0
max = 0;      //reset max to 0
min = 0;    //reset min to 0
public void actionPerformed( ActionEvent e ) {   //run upon return of button
wt = Float.parseFloat(weighttext.getText()); //convert weighttext from String to Float
ht = Float.parseFloat(heighttext.getText());    //covert heighttext from String to Float
repaint();     //refresh paint area
public float indexer() //begin indexer method
    float ind;    //delare local variable ind
    ind = wt/(ht*ht);      //perform calculation
    return ind;    //make indexer() the value of variable ind
} // end of indexer method
public float maxWeight() //begin maxWeight method
    float maxwt;    //declare local variable maxwt
    final float UPPER = 25.0f;   //declare variable UPPER as a float with a decimal value of 25.0
    maxwt = UPPER*ht*ht;      //perform calculation
    return maxwt;          //make maxWeight() the value of variable maxwt
} // end of maxWeight method
public float minWeight()   //begin minWeight method
    float minwt;    //declare local variable minwt
    final float LOWER= 20.0f;   //declare variable LOWER as a float with a decimal value of 20.0
    minwt = LOWER*ht*ht;    //perform calculation
    return minwt;      //make minWeight() the value of variable minwt
} // end of minWeight method
public void paint(Graphics g)    //begin paint method, define g as Graphics
    index=indexer();   //covert method indexer() to variable index
    max=maxWeight();      //convert method maxWeight() to variable max
    min=minWeight();     //convert method minWeight() to variable min
    g.setFont(new Font("Verdana", Font.ITALIC, 15));    //define font, weight and size
    g.setColor(new Color(90,90,90));     //set new colour
    g.drawRect(5,100,300,75);      //define size of rectangle
    g.setColor(new Color(255,107,9));   //set new colour
    g.drawString("BMI is " + fmt2.format(index) + " for " + fmt2.format(wt) + "kg",20,120);   //create string in paint, define its on screen position
    g.drawString("Maximum bodyweight is " + fmt2.format(max) + "kg", 20,140);   //create string in paint, define its on screen position
    g.drawString("Minimum bodyweight is " + fmt2.format(min) + "kg", 20,160);     //create string in paint, define its on screen position
} // end of paint method
}    // end of Bmi classI have written the above code to calculate someones BMI (Body Mass Index). Basically as you can see it recieves a weight and height from the user and calculates the rest. But whilst that good I would like to know how I can make it tell the user something to the effect of "Your overweight" or "Your underweight". The if statement runs like this:
if (wt > max)This forum doesn't quite handle <> properly. The greater and less than symbols. So above you will see > this is the html character code for a greater than symbol so please read it as such.
And then if wt is greater than max then it will say "Your overweight".
But I can't figure out how to include it in the above program. Becuase it won't run in paint, atleast it won't the way I have done it previously. So can you think of any other ways?
Help much appreciated,
Simon

Thanks very much that works well.
Simon
My code now looks like this: import java.applet.Applet; //bring in the applet class
import java.awt.*;             //bring in the graphics class
import java.awt.event.*;      //bring in the event class
import java.text.DecimalFormat;    //bring in the decimal format class
import java.lang.Float;       //bring in the float class
public class Bmi extends Applet implements ActionListener {   //begin program and start ActionListener
Label weight, height;    //define Label variable
TextField weighttext, heighttext;    //define TextField variables
Button calculate;     //define button variables
float index, wt, ht, max, min;    //define float variables
DecimalFormat fmt2 = new DecimalFormat("#.00"); //set decimal format for reals
public void init() {    //begin init()
weight = new Label("Please enter your weight in Kg. (2 decimal places): ");   //define content of Label weight
weighttext = new TextField(6);            //define size of TextField
height = new Label("Please enter your height in Metres (2 decimal places): ");   //define content of Label height
heighttext = new TextField(5);    //define size of TextField
calculate = new Button("Calculate!!");       //define content of Button
add(weight);      //add Label weight to the GUI
add(weighttext);   //add TextField weighttext to the GUI
add(height);      //add Label height to the GUI
add(heighttext);     //add TextField heighttext to the GUI
add(calculate);        //add button calculate to the GUI
calculate.addActionListener(this);    //wait for button to be returned
wt = 0;     //reset wt to 0
index = 0; //reset index to 0
ht = 0;      //reset ht to 0
max = 0;      //reset max to 0
min = 0;    //reset min to 0
public void actionPerformed( ActionEvent e ) {   //run upon return of button
wt = Float.parseFloat(weighttext.getText()); //convert weighttext from String to Float
ht = Float.parseFloat(heighttext.getText());    //covert heighttext from String to Float
repaint();     //refresh paint area
public float indexer() //begin indexer method
    float ind;    //delare local variable ind
    ind = wt/(ht*ht);      //perform calculation
    return ind;    //make indexer() the value of variable ind
} // end of indexer method
public float maxWeight() //begin maxWeight method
    float maxwt;    //declare local variable maxwt
    final float UPPER = 25.0f;   //declare variable UPPER as a float with a decimal value of 25.0
    maxwt = UPPER*ht*ht;      //perform calculation
    return maxwt;          //make maxWeight() the value of variable maxwt
} // end of maxWeight method
public float minWeight()   //begin minWeight method
    float minwt;    //declare local variable minwt
    final float LOWER= 20.0f;   //declare variable LOWER as a float with a decimal value of 20.0
    minwt = LOWER*ht*ht;    //perform calculation
    return minwt;      //make minWeight() the value of variable minwt
} // end of minWeight method
public void you(Graphics g)
String statement;
if(wt > max) statement="You are very fat";
else if(wt < min) statement="You are very thin";
else statement="You are in the recommended weight range for your height";
g.drawString(statement, 20,210);
public void paint(Graphics g)    //begin paint method, define g as Graphics
    you(g);
    index=indexer();   //covert method indexer() to variable index
    max=maxWeight();      //convert method maxWeight() to variable max
    min=minWeight();     //convert method minWeight() to variable min
    g.setFont(new Font("Verdana", Font.ITALIC, 15));    //define font, weight and size
    g.setColor(new Color(90,90,90));     //set new colour
    g.drawRect(5,100,300,75);      //define size of rectangle
    g.setColor(new Color(255,107,9));   //set new colour
    g.drawString("BMI is " + fmt2.format(index) + " for " + fmt2.format(wt) + "kg",20,120);   //create string in paint, define its on screen position
    g.drawString("Maximum bodyweight is " + fmt2.format(max) + "kg", 20,140);   //create string in paint, define its on screen position
    g.drawString("Minimum bodyweight is " + fmt2.format(min) + "kg", 20,160);     //create string in paint, define its on screen position
} // end of paint method
}    // end of BmiThanks again,
Simon

SSO java sample application problem

Hi all,
I am trying to run the SSO java sample application, but am experiencing a problem:
When I request the papp.jsp page I end up in an infinte loop, caught between papp.jsp and ssosignon.jsp.
An earlier thread in this forum discussed the same problem, guessing that the cookie handling was the problem. This thread recommended a particlar servlet , ShowCookie, for inspecting the cookies for the current session.
I have installed this cookie on the server, but don't see anything but one cookie, JSESSIONID.
At present I am running the jsp sample app on a Tomcat server, while Oracle 9iAS with sso and portal is running on another machine on the LAN.
The configuration of the SSO sample application is as follows:
Cut from SSOEnablerJspBean.java:
// Listener token for this partner application name
private static String m_listenerToken = "wmli007251:8080";
// Partner application session cookie name
private static String m_cookieName = "SSO_PAPP_JSP_ID";
// Partner application session domain
private static String m_cookieDomain = "wmli007251:8080/";
// Partner application session path scope
private static String m_cookiePath = "/";
// Host name of the database
private static String m_dbHostName = "wmsi001370";
// Port for database
private static String m_dbPort = "1521";
// Sehema name
private static String m_dbSchemaName = "testpartnerapp";
// Schema password
private static String m_dbSchemaPasswd = "testpartnerapp";
// Database SID name
private static String m_dbSID = "IASDB.WMDATA.DK";
// Requested URL (User requested page)
private static String m_requestUrl = "http://wmli007251:8080/testsso/papp.jsp";
// Cancel URL(Home page for this application which don't require authentication)
private static String m_cancelUrl = "http://wmli007251:8080/testsso/fejl.html";
Values specified in the Oracle Portal partner app administration page:
     ID: 1326
     Token: O87JOE971326
     Encryption key: 67854625C8B9BE96
     Logon-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_login
     single signoff-URL: http://wmsi001370:7777/pls/orasso/orasso.wwsso_app_admin.ls_logout
     Name: testsso
     Start-URL: http://wmli007251:8080/testsso/
     Succes-URL: http://wmli007251:8080/testsso/ssosignon.jsp
     Log off-URL: http://wmli007251:8080/testsso/papplogoff.jsp
Finally I have specified the cookie version to be v1.0 when running the regapp.sql script. Other parameters for this script are copied from the values specified above.
Unfortunately the discussion in the earlier thread did not go any further but to recognize the cookieproblem, so I am now looking for help to move further on from here.
Any ideas will be greatly appreciated!
/Mads

Pierre - When you work on the sample application, you should test the pages in a separate browser instance. Don't use the Run Page links from the Builder. The sample app has a different authentication scheme from that used in the development environment so it'll work better for you to use a separate development browser from the application testing browser. In the testing browser, to request the page you just modified, login to the application, then change the page ID in the URL. Then put some navigation controls into the application so you can run your page more easily by clicking links from other pages.
Scott

SSO between a Java EE application (Running on CE) and r/3 backend

Hi All,
Over the past few days I have been trying to implement a SSO mechanism between NW CE Java Apps and R/3 backend without any success. I have been trying to use SAP logon tickets for implementing SSO.
Below is what I need:
I have a Java EE application which draws data from R/3 backend and does some processing before showing data to the users. As of now the only way the Java App on CE authenticates to r/3 backend is by passing the userid and pwds explicitly. See sample authentication code below:
BindingProvider bp = (BindingProvider) myService;
Map<String,Object> context = bp.getRequestContext();
context.put(BindingProvider.USERNAME_PROPERTY, userID);
context.put(BindingProvider.PASSWORD_PROPERTY, userPwd);
Now this is not the way we want to implement it. What we need is when the user authenticates to CE ( using CE's UME) CE issues a SAP logon ticket to the user. This ticket should be used to subsequently login to other system without having to pass the credentials. We have configured the CE and Backend to use SAP logon tickets as per SAP help.
What I am not able to figure out is: How to authenticate to SAP r/3 service from the java APP using SAP logon tickets. I couldnt find any sample Java code on SAP help to do this. (For example the above sample code authenticates the user by explicitly passing userid and pwd, I need something similar to pass a token to the backend)
Any help/pointers on this would be great.
Thanks,
Dhananjay

Hi,
Have you imported the java certificate into R/3 backend system ? if so.
Then just go to backend system and check on sm50 for each applicaion instance of any error eg.
SM50-> Display files (ICON) as DB symbol with spect.(cntrlshiftF8)
You will get logon ticket details.
with thanks,
Rajat

Nw 7.4 Java No DBACOCKPIT

Similar Messages

Maybe you are looking for