NW BRM, Rules Manager and transport the BRM project through the landscape.

Hello,
I have a question about the working with Rules Manager and the possible difficulties of the changes management.
The scenario is simple.
We have created a BRM project in software component with decision table and initialized it with some values. Then we transported it to the QA and Prod system through the CMS. Note: in the SC not only the BRM project but also a WDJ, for example.
Then business user changes the values in the decision table in Prod system by using Rules Management functionality. Everything is OK till now.
But then we changed something in the WDJ component in the same SC and then transported it to the Pros system. After that transport the changes of the business user are lost. How can we fix it?
Of course we can download the runtime content from the prod system, but it's bit complicated. Any ideas?

Dear Kirill,
SAP NW Business Rules Management web UI tool for business users (Rules Manager) has a feature "Download Rules Content" from CE 7.3 onwards.
Please find the details of the feature in the below link:
http://help.sap.com/saphelp_nw73/helpdata/en/42/89a408c265402dbaf1c39ea423d816/frameset.htm
Using the above "Download Rules Content" feature of RulesManager, you should be able to import the latest version of the Rules Project, which contains the changes done by the business user, into NWDS. Once you have the modified rules project in NWDS you should be able to transport it to QA and Prod systems without the data loss.
But this feature is only available from NW CE 7.3 onwards.
Hope this helps resolve your problem.
Thanks and Regards,
Santosh Giri

Similar Messages

Webinar: Change Management and Transport in the Enterprise Portal

SAP NetWeaver Know-How Network Webinar:
Change Management and Transport in the Enterprise Portal
Wednesday 21 July 2004
11 a.m. EDT
On Wednesday 21 July, Scott Jones hosts the webinar titled Change Management and Transport in the Enterprise Portal as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Scott describes his webinar presentation:
Change Management offers special challenges to administrators working in Enterprise Portal 6.0 SP2 environments. This talk provides recommendations and tools, and defines best practices and methods for the effective transport of Enterprise Portal content, with special attention to content dependencies, tracking, and troubleshooting. We'll also look forward to Change Management enhancements coming with Netweaver 04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 21 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code TBD.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello,
In the intresting document I read that for the deployement the version number mentionned in the MANIFEST.MF is very important in a clustered evironment.
SAPnote 727180 - Version of PAR File in Manifest File
denies this.
Can you clear this out?
Kind Regards
Koen Van Loocke

Rules Manager and Expression Filter

I was wondering if someone could shed light on Rules Manager and Expression Filter.
How will the use of Rule Based Development be efficient compared to todays
Programming paradigm ?

Zahir and Michael,
The Wikipedia entry for "Rules Engine" summarizes the key benefits of using rule-based development approach in dynamic environments.
Also see a brief discussion on "Developing Rules Applications" in the Application Develeoper's Guide http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14288/exprn_intro.htm#sthref22
Please contact me through Rules Manager forum (Rules Manager & Expression Filter if you need additional help.
Regards,
-Aravind.

Rules Manager and Expression filer on XE

Has any one installed Rules Manager and Expression filter on an XE database? Would love to check it out on XE. Looks like it is not pre-installed. I was able to run the install scripts. I noticed one error though. It seemed to indicate jvm is not installed on XE. Tried to locate initjvm scripts. Either the script name has changed in XE or it is not there. This is a quick question in case somebody has gone down this path. I will post more details soon when I get sometime to look at the full log.

Read the post about javavm. I could not find the post where Tom has said it would be very problematic to install javavm on XE. I guess Rules Manager and Expression filter on XE is not possible or very difficult.

When closing my Firefox window, all processes are not closing requiring me to open task manager and kill the process before using Firefox again. Received recent upgrade and hasn't worked right since then.

I open Firefox, use it, then close the window. Try to reopen Firefox and it fails with a message that a previous process is still running. Requires me to open Task Manager and kill the old process.

Try to wait a bit longer before reopening Firefox to give Firefox more time to close completely. 
Try to use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Every time i close firefox, to re-open it i have to either log out and log back in, or i have to go through the task manager and end the proccess, otherwise it just says fire fox if already running and it wont open, how do i fix this proble??

Everytime i am finished using Firefox, if i want to go back onto the internet, i now have to either log off and then log back on. or i have to use the task manager and close the firefox process, it is extrlmely annoying as i have to do it everytime, if i try and open firefor before i do either of what i have explained it just comes up with, firefox is allready running please close all windows to open a new one, or end the process...how do i stop this message from popping up every single time i use firefox????

https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

After a one week logout and shutdown my macpro 1,1 laptop shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

After a one week logout and shutdown my macpro 1,1 laptop running OSx 10.6.8 shows a black screen at startup attempts. The battery is fully charged and both resetting the power manager and zapping the PRAM have failed to permit startup. What else can I try?

Startup – Black screen with cursor
Startup Issues - Resolve
Startup Issues - Resolve (2)

Whenever I shut down iTunes on my computer, it keeps reopening and I have to go into Task Manager and end the process in order for it to stop doing this. I am running it on a Windows 7 Home Premium 64 bit machine.

Whenever I shutdown iTunes on my computer, it keeps re-opening and I have to go to Task Manager and end the process in order for it to shutdown.

Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up

Installing Adobe Extension Manager and get the error message

I am trying to install Adobe Extension Manager and get the error message ' Requires Photoshop 32 version in range of inclusively 13.0 and 13.9' Please help me solve this, not sure how to proceede after getting a message that there is four updates available to download !

Type about:addons in URL
*plugins and extension -> disable adobe reader

I have a prpblem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

i have a problem in enabling webserver i get message labview webserver not running error 54 , i checked IIS Manager and www the services r running ok ..can anybody tell what might be error ,,,iam on labview 6.1 and win 2003 server.,

If you already have IIS web server running, you need to run the LabVIEW web server on a different port to avoid conflicts. It probably won't start because the port 80 is already in use.
Check options.."Web Server: Configuration" within LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF.

I had some problems with my pc, since then when I close Firefox it won't reopen unless i go to Task manager and end the process for FF. I have uninstalled FF and re-installed it and no change.
Walt

See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Start the node manager and rerun the command

Seeing the following in weblogic server log. When will I get this error? And how to retun node manager ?
The node manager at host ....and port 5555 seems to be down. Start the node manager and rerun the command.

You will get this message when the machine's NodeManager was not started.
Take a look at the following links to see how to install and start the Node Manager:
http://e-docs.bea.com/wls/docs81/adminguide/nodemgr.html#1150128
http://e-docs.bea.com/wls/docs81/adminguide/confignodemgr.html#1142955

I bought extenscript toolkit cc, in a monthly payment of 35 nic. i did everything acording to the instructions and the program i got is adobe aplication manager. and not the program for proccesing a picture - extenscript toolkit cc. please help me. hanan

i bought extenscript toolkit cc, in a monthly payment of 35 nic. i did everything acording to the instructions and the program i got is adobe aplication manager.
and not the program for proccesing a picture - extenscript toolkit cc.
please help me.
hanan epshtain

I bought using the software Adobe Creative Cloud for one year.
I pay in installments months 35 Nice ..
Adobe sent me an inappropriate application ... I can not get the software I ordered ... I'm asking for help ..
Unable to send email service department to get answers ..
This problem ..
Thank you
Hanan.

I have managed to lock the landscape orientation on my iphone 3 - any ideas as to how I unlock it please?

I have managed to lock the landscape orientation on my iphone 3 - any ideas as to how I unlock it please?

Im not aware that you can lock your screen in landscape so I'm assuming you have locked it in portrait and want to allow it to ne seen landscape, therefore double click the Home button, swipe the icons to the right, you will see an icon with a circle-arrow. That is your screen orientation lock.
Assuming again you have iOS5 have a look at the following for more help, page 21
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

FF won't open and an error message appears on the screen "unresponsive script" it I open task manager and stop the error message FF runs normally, how do I fix this problem

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

This problem only started when I upgraded to FF 4.0. I am running Windows 7. When I go to the task manager I am able to see the error message in the processes area, if I highlight it and tell the task manager to stop it, FF immediately starts and runs normally. I have no idea where the error message is coming from.

NW BRM, Rules Manager and transport the BRM project through the landscape.

Similar Messages

Maybe you are looking for