NW CE 7.1 Post install - Portal Configuration

Hi Friends,
I have installed the NW CE 7.1 and I could configure the SLD through the configuration wizard.
I am able to login to server for administration through the URL http://<<host>>:50200/nwa.
But I am trying to login to portal by the URL: http://<<host>>:50200/irj. It is not working showing error message resource not found.
Am I missing something. Could you please help me configuring the server.
Regards
Lakshmi

Hi,
I have selected the typical installation.  Do I need to select the custom one for  this.
While starting the services I can see the  AS Java is started and is running.
I am under the impression the AS java means Portal.
Please correct me if I am wrong.
regards
lakshmi

Similar Messages

  • Post Install RAID Configuration?

    I have a stand alone server running Arch 2009.08 x64 and it was configured via the 'Netinst' CD however during the time of the installation, the server had only one physical disk. I installed the system as follows:
    * /dev/sda1 = swap
    * /dev/sda2 = boot
    * /dev/sda3 = /
    * /dev/sda4 = /var
    Now I have since obtained identical drives on this system which show up as /dev/sdb and /dev/sdc. Both of the new drives are identical. I have the system running perfectly however I would like to create /dev/sdb and /dev/sdc in a mirror.  I can use 'cfdisk' utility to create RAID partitions on the newly installed drives using the 'fd' code. Can I simply just use 'mdadm' utility to create a mirror after I create the partitions with out messing up my configured / working Arch Linux server?
    mdadm --create --verbose /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1
    The Wiki has a write up (which I have never been able to get working) on RAID / LVM but this appears to be configured during the installation of Arch which I have already done. Not to mention I have followed the Wiki guide dozens of times to no avail. I even gave up on trying to install the swap and root partitions on the RAID and just do /home and it still fails.
    Anyone know if I will run into any issues?

    Well...
    I think I finally got this working in a RAID1 mirror! I am pretty stoker right now because I have no idea what I did different every other time but it's working and she looks good...
    FDISK
    Disk /dev/sda: 320.1 GB, 320072933376 bytes
    255 heads, 63 sectors/track, 38913 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x0003e44e
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 498 4000153+ 83 Linux
    /dev/sda2 499 5478 40001850 83 Linux
    /dev/sda3 5479 38913 268566637+ fd Linux raid autodetect
    Disk /dev/sdb: 320.1 GB, 320072933376 bytes
    255 heads, 63 sectors/track, 38913 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x000ba720
    Device Boot Start End Blocks Id System
    /dev/sdb1 1 498 4000153+ 82 Linux swap / Solaris
    /dev/sdb2 499 5478 40001850 83 Linux
    /dev/sdb3 5479 38913 268566637+ fd Linux raid autodetect
    Disk /dev/md0: 275.0 GB, 275012124672 bytes
    2 heads, 4 sectors/track, 67141632 cylinders
    Units = cylinders of 8 * 512 = 4096 bytes
    Disk identifier: 0x00000000
    Disk /dev/md0 doesn't contain a valid partition table
    MDSTAT
    [root@mail ~]# cat /proc/mdstat
    Personalities : [raid1]
    md0 : active raid1 sda3[0] sdb3[1]
    268566528 blocks [2/2] [UU]
    /dev/md0:
    Version : 0.90
    Creation Time : Tue Dec 1 11:00:43 2009
    Raid Level : raid1
    Array Size : 268566528 (256.13 GiB 275.01 GB)
    Used Dev Size : 268566528 (256.13 GiB 275.01 GB)
    Raid Devices : 2
    Total Devices : 2
    Preferred Minor : 0
    Persistence : Superblock is persistent
    Update Time : Tue Dec 1 13:37:24 2009
    State : clean
    Active Devices : 2
    Working Devices : 2
    Failed Devices : 0
    Spare Devices : 0
    UUID : 94c95cea:6ead73dd:d14ae7e0:061e6ea4
    Events : 0.36
    Number Major Minor RaidDevice State
    0 8 3 0 active sync /dev/sda3
    1 8 19 1 active sync /dev/sdb3
    Looks like this is exactly what I wanted!
    Last edited by Carlwill (2009-12-01 18:47:09)

  • Installing and Configuring Oracle Portal

    http://oraclelabs.com/index.php/2010/08/30/installing-and-configuring-oracle-portal-forms-reports-and-discoverer/

    Try running the diag.cmd and see for the log.If u cannot fig out just post the log too.

  • Post Install Steps & Initial Configuration

    Hi,
    I want to confgure system monitoring on solution manager ehp1 Please tell Post Install Steps , Initial Configuration. to proceed
    Thanks,
    Shashi

    The transaction Solman_setup is not available before sp18.....it is available in EHP1 or SP18 onwards
    Hope it clarifies ur doubt
    Regards
    Prakhar

  • Install and configure Tomcat post-Crystal Reports Server implementation?

    Scenario - have Crystal Reports Server 2008 V1 already installed using WACS and IIS. Everything runs great.  Want to add in SAP Crystal Dashboard Design. Looking through the documentation for Dashboard Design tells me I need to:
    1. Install SAP BusinessObjects Enterprise or Crystal Reports Server.
    2. Install SAP BusinessObjects Xcelsius Enterprise 2008.
    3. Install Live Office.
    4. Install SAP BusinessObjects Web Services.
    5. Add the Live Office keycode to the Central Management Console
    Made it past 3 and am hung up on 4. According to documentation for Unified Web Services, it looks like I need Tomcat  installed, but Crystal Reports Server doesn't offer an expand installation option.  There also doesn't seem to be any good documentation included with SAP Crystal Dashboard Design on installing web services - if it's required, why isn't it included and where can I find the documentation (assuming it's different than the Unified Web Services Administrator's Guide I found).
    It seems odd that a customer who might want to purchase an add-on for their Crystal Reports Server implementation wouldn't be able to easily add to their product..
    1)  Can I install web services to Crystal Reports Server using just the WACS or is Tomcat required? The admin guide indicates WACS is not supported for apps that use web services, like Live Office. Is that an absolute?
    2)  If Tomcat is required, can I install and configure it for an existing Crystal Reports Server 2008 V1 implementation?
    3)  If i can install Tomcat on a server with an existing Crystal Reports Server 2008 V1 implementation, is there a specific guide to doing so?

    Hi Colin,
    What is the exact version of BO/Crystal Enterprise.
    If it is BOXI R2 then follow below mentioned steps.
    To manually install the ActiveX Viewer on the client computer:
    1. Copy the ActiveXViewer.cab file from the server to the client computer, and extract its contents to a temporary folder.
    2. Move the files Crviewer.dll, Crviewer9.dll, Sviewhlp.dll, and Swebrs.dll to the System32 folder. Keep this folder visible.
    3. On the Start menu, click Run. The Run dialog box appears.
    4. In the Open box, type "regsvr32" and then drag and drop the Crviewer.dll file icon from the System32 folder onto the Run dialog box.
    5 Click OK.
    Repeat steps 3 and 4 for the files Sviewhlp.dll, and Swebrs.dll.
    You may still be prompted by the browser, choose more options and never install to avoid being prompted.  The viewer should work after that.
    Thanks,
    Purna.

  • 9iAS 1.0.2.2/Portal 3.0.9 - Installation Error at "Portal Configuration Assistant"

    I was installing the iAS1.0.2.2 and at the Portal Configuration Assistant, at the 23% I received the following error:
    "An unexpected error ocurred during the Install Process. Check the install.log ....."
    (FYI this is the second time I try to install it and in both cases I received the same error at the same point, so I decided to ask for help)
    At the end of the Install.log is the following:
    =====================
    STEP 7 : Installing WWC layer Components
    INSTALL_ACTION : installWWC(): ..\..\bin\sqlplus portal30/portal30@<DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)HOST=administrator)(PORT=1521)))(CONNECT_DATA=(SID=virtual))) @..\..\portal30\admin\plsql\wwc\wwcinst.sql portal30 USERS TEMP wvinswwc.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
    ORA-00439: feature not enabled: Function-based indexes
    Errors encountered in the Install process. Installation Aborted
    =========================
    I noticed during the installation, before the Configuration Assistant (aprox at 97%), the installation opened a DOS session and I could see some errors with some Indexes but I don't know in which Log are registered. maybe it can help to troubleshoot my above problem?
    Operating System: NT4 SP6
    Database: 8.1.7.0 standard edition
    iAS 1.0.2.2 standard edition
    both under the same machine
    Let me know if there is any other info I can provide.
    Tks in advance!

    There has been some confusion around certification on SE over the past week. I want to clarify the situation.
    We discovered an issue with the Portal on SE last week. We inadvertently used function based and bitmapped indexes (EE only features). This issue has been masked to date because the install proceeded normally after the errors were raised. In 3.0.9 we made the install more strict in that it will stop by default if it hits an unexpected error.
    On further research, we have determined that these errors have little or no impact on the general functioning of the product and as such are maintaining the position that Portal 3.x is indeed certified on 8.1.7
    Standard Edition.
    There is unfortunately a necessary work around to the install issue (which we will rectify as soon as possible). In order to install on SE, you must execute the Oracle Portal Configuration Assistant (OPCA) from
    the command line and specify the "verbose" mode (see next post). In this mode, the errors are ignored and the install proceeds appropriately.
    Regards,
    The Oracle9iAS Portal Development Team

  • ABAP & Java Preview install done. Need Post install steps for XI.

    Hi
    Please excuse for the most basic question.
    From the trial downloads, I've installed the
    ABAP and Java and would like to know the
    post-install steps for activating and configuring
    the Exchange Infrastructure component and
    subsequent configuration
    I've installed on the local host along with the
    Microsoft Loopback Adapter. What should be
    the connection parameters for the Visual
    Administrator?
    Any help is appreciated. Thank U.
    Rajendra.

    Hi Rajender
    I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
    Coming back to your post:Go through the below link
    https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Re: XI INSTALLATION and POSTINSTALLATION
    If you need the XI configuration guide then visit:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    Any issues feel free to ask
    Reward with suitable points:

  • Installing Portal Server 7.1 on Windows XP

    I installed Portal Server 7.1 for Windows, via the Sun Java Application Platform Suite Installer. The installer was super clean and very easy--practically idiot-proof. It is substantially easier to install than the SPARC version.
    However, during installation and configuration--done via the GUI--the Portal Server configuration failed. After performing all the necessary post-intallation tasks, I discovered that CACAO will not start. When I attempt to start CACAO, I get the following:
    "Cannot start an unconfigured instance. "
    --(This is a doc defect. The doc should tell me to configure before starting)
    After attempting to configure, by following the instructions, I get the following error:
    "Error handling error: 1722, LookupAccountName at <cacao-base>\cacao_2\\configure.pl line 120."
    Is this a bug or is this yet another documentation defect? Anyone experience this during a Windows installation?

    Hi,
    I'm also trying to install Portal Server 7.1 and configure the same , getting the same error
    ---------------- "Cannot start an unconfigured instance."
    I went to the cacao log location "C:\Program Files\Sun\JavaES5\share\cacao_2\var\cacao\instances\default\logs" to find out the errors but could not find any log files there.
    But when i went to the AM log location "C:\Program Files\Sun\JavaES5\identity\debug" . I found three files namely,
    amEventService
    amSDK
    CCPPClientDetector
    there contents are as follows,
    In amEventService
    03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
    03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
    rminating! Persistent Searches will no longer be operational.
    03/13/2007 06:07:23:380 PM IST: Thread[EventService,5,main]
    ERROR: EventService.run() - Monitor thread is terminating! Persistent Searches will no longer be operational.
    In amSDK
    03/13/2007 06:07:23:365 PM IST: Thread[EventService,5,main]
    ERROR: Connection to LDAP server threw exception:
    netscape.ldap.LDAPException: failed to connect to server ldap://w2gzw3vm01.apac.corp.eds.com:1389 (91); Cannot connect to the LDAP server
    at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:517)
    at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:437)
    at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:276)
    at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:201)
    at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1081)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:952)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:903)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1050)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1060)
    at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1005)
    at com.iplanet.services.ldap.DSConfigMgr.getConnection(DSConfigMgr.java:387)
    at com.iplanet.services.ldap.DSConfigMgr.getNewFailoverConnection(DSConfigMgr.java :354)
    at com.iplanet.services.ldap.DSConfigMgr.getNewConnection(DSConfigMgr.java:283)
    at com.iplanet.services.ldap.DSConfigMgr.getNewAdminConnection(DSConfigMgr.java:24 0)
    at com.iplanet.services.ldap.event.EventService.addListener(EventService.java:351)
    at com.iplanet.services.ldap.event.EventService.resetAllSearches(EventService.java :673)
    at com.iplanet.services.ldap.event.EventService.run(EventService.java:515)
    at java.lang.Thread.run(Thread.java:595)
    and In CCPPClientDetector
    03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
    03/13/2007 05:48:23:565 PM IST: Thread[main,5,main]
    ERROR: Could not get 'fediConfigRoot' from properties file:
    03/13/2007 05:50:04:205 PM IST: Thread[main,5,main]
    03/13/2007 05:50:04:190 PM IST: Thread[main,5,main]
    ERROR: Could not get 'fediConfigRoot' from properties file:
    03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
    03/13/2007 05:50:37:643 PM IST: Thread[main,5,main]
    ERROR: Could not get 'fediConfigRoot' from properties file:
    03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
    03/13/2007 05:51:13:377 PM IST: Thread[main,5,main]
    ERROR: Could not get 'fediConfigRoot' from properties file:
    any ideas on what I'm missing ?
    Thanks in Advance,
    Vinayagan

  • How would i install and configure HS on windows?

    Hello,
    I would like to explore more about installing and configuring HS on windows box (64-bit).
    I have two questions.
    1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
    2)can some provide me more steps to configure it, if it's possible.
    3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways?
    Thanks,
    Steve.

    For 64bit Windows you need to have a 64bit DG4ODBC - DG4ODBC 64bit for Windows was first released with 11.2.
    1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
    => No - only 64bit DG4ODBC is supported - so please use DG4ODBC 11.2
    2)can some provide me more steps to configure it, if it's possible.
    Please have a look at this note: How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install          [Document 1266572.1]     
    which is available through My Oracle Support portal.
    3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways? The easiest way is a gateway, but you could use a JDBC driver and load the MS SQL Server JDBC driver into the JVM of the Oracle database, then code the connection.

  • 10g post install mail configs

    Hello
    What post install configurations need performed in order to send mail? I am able to send mail to the mail domain I configured in OCS. I cannot send mail to any other mail servers. The error i get is:
    The server rejected the following recipient(s):
    [email protected]
    Please correct the error and try again.
    TIA.

    I feel silly not being able to get this to work, but I've done the following and it still does not allow me to send mail from computers using clients other than the portal/webmail:
    Went to EM on the apps tier at: apphost:1156/
    Clicked on the "Administration" column icon for Mail Application
    Clicked Policy, Incoming mail
    Went to Trust and added:
    subnet to Client IP addresses
    domains to Client Domains
    my domain to Sender Domains w/ MTA auth off
    "*" to sender domains w/ MTA auth on
    Made sure to save settings. Restarted the Mail Application.
    All I am trying to accomplish is to allow any computer to relay mail through this SMTP server as long as the user is authorized/logged in.
    Am I doing this in the wrong place? Could someone offer some details as to where/what I should be changing to get this to work?
    Thanks in advance
    Message was edited by:
    cblack

  • EP Post instalation STep

    Hi Friends i installed EP 6.0 . now i want konw whta are Post instalation step to do either admin and Development on it . plz can any one give details , i am ep Developer .
    Thnaks In advance
    Kumar

    Hi Kumar,
    As you have said that you have installed EP 6.0. Now we need to proceed with integration as per your project requiremnets. We can implement ESS ,MSS or else configure SSO to BW or R/3 systems.
    Please chk teh below link.this might help you in knowing more post installation steps..
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/fe79d690-0201-0010-f3be-825bcc262a09
    Hope this wil be useful.
    Regards,
    Shaila

  • BAM Portal configuration error in BizTalk Server 2013 R2

    I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
    give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
    to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!

    " I need to know what the experts need to see in order to give me an answer."
    Experts needs:
    1) Little background of the issue you are facing.
    2) The log file generated.
    3) The configuration of your server.
    "now I have enough evidence to go back to our project manager and explain why you do not install every
    feature on a server."
    Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
    only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
    Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
    Review the Hardware
    and Software Requirements for BizTalk Server 2013 and 2013 R2.
    Understand the Considerations
    Before Installing BizTalk Server 2013 and 2013 R2.
    Prepare Your Computer for Installation.
    Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
    Planning for the BAM Portal
    I would advice you to refer this post by Sandro . BAM Portal configuration error
    Rachit

  • PI 7.11 sp5 post install steps - SLD update hangs in IE browser

    Hello gurus,
    This is my first shot at installing PI ever.  We decided to go with PI 7.1 EHP1 and SP5.  I think the latest may be SP6.
    At any rate, we're doing this on AIX 6.1 and Oracle 10.2.0.4.
    I followed the install Guide exactly.  Did the sapinst, oracle and patch. Next, I manually updated the KERNEL, IGS , JVM, Then I updated SPAM, SAP_BASIS, then all the other abap components.  Then did JSPM and all those components.  Everything matches SP5 for PI 7.11
    https://websmp204.sap-ag.de/maintenanceNWPI71
    SAP_ABA     711     0005     SAPKA71105
    SAP_BASIS     711     0005     SAPKB71105
    PI_BASIS     711     0005     SAPK-71105INPIBASIS
    ST-PI     2008_1_710     0003     SAPKITLRE3
    SAP_BW     711     0005     SAPKW71105
    ST-A/PI     01M_BCO710     0001     SAPKITAB8F
    Now I'm doing the post install steps that are in the instguide.  THere are tons of steps, but let me go over the big ones and where I'm having a problem:
    READ ALL THESE NOTES:
    Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
    Note 1286149 - Configuration Wizard: PI Self Test for NetWeaver
    Note 1107808 - Collective Note: Configuration Wizard 7.1
    Note 1286428 - Configuration Wizard: PI Wizard Templates overview
    Note 1115280 - PI CTC: Running SAP NW for PI in a different client
    At this point, based on being at PI 7.11 and SP5, I did the client copy.  from 000 SAP_UCUS to my new 400 client.  Then I did 001 SAP_USER to my new 400 client.
    Then I followed the steps to link the java UME from 001 to 400.  No problem after restarted SAP, it goes to 400.
    Now, the next step as I see it is to run the initial config wizard out of NWA.  I did that, no errors.
    My problem is when I get to updating the SLD.  I started at cimsap 1.5.42 and CRDelta 5.0....
    I updated cimsap to the cimsap51509_1-20005942.zip which took me to 1.6.9
    Next, I tried to import CRDelta51509_1-20005942.ZIP.  I "browse" to find it during the import, but when I click the "IMPORT" button, my browser hangs...
    I don't even get to the next page where it would be one more "warning/info" before I could really start the import.
    I didn't find anything in the work directory or the cluster/server0/log directory.
    I search all through SDN/OSS but could not find anyone who had this problem.
    Where did I mess up?  Are there other config wizards I should have run before I tried to update the SLD? 
    --NICK

    Hey Caio,
    Thanks for the response but it doesn't actually answer my question.  But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ?  And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
    NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
    PI Adapter Engine in JPR Mode
    PI Demo Client
    PI Full Qualified Host Name
    PI Self Test for NetWeaver
    PI SLD Self Registration
    Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ).  Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box  marked "object server name".  This config took about 30 minutes.  I didn't see any errors or warnings.  although I didn't view the log.  I did go into Java JEE services and Filter for Services with name "XPI".  All were green.
    THEN I tried to update the SLD content.
    any thoughts appreciated.
    NICK

  • Errors During Post Install Check on Ubuntu 12.04

    Hello Gurus,
    I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. I patched the HTTP server with 6078836 (Copied libdb.so.2 to /usr/lib).
    I did the md5sum check before starting the install. I completed the kernel settings as per the note below:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
    Contents of /etc/hosts
    127.0.0.1           localhost.localdomain      localhost
    192.168.1.101     erpbeginner.dyndns.org     erpbeginner
    Installation went smooth till the Post install checks where it fails for the following:
    HTTP
    JSP
    Login Page
    Help Page
    Virtual Directory
    Contents of the log file:
    command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
    riwTDBup.sh started at Tue Oct 16 07:30:46 EDT 2012
    Parameters passed are : /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /d01/r12/VIS/db/tech_st/11.1.0
    ORACLE_SID : VIS
    TWO_TASK :
    PATH : /d01/r12/VIS/db/tech_st/11.1.0/perl/bin:/d01/r12/VIS/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:.
    LD_LIBRARY_PATH : /d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/db/tech_st/11.1.0/lib:/usr/dt/lib:/d01/r12/VIS/db/tech_st/11.1.0/ctx/lib
    Executable : /d01/r12/VIS/db/tech_st/11.1.0/bin/sqlplus
    riwTDBup.sh exiting with status 0
    Database ORACLE_HOME connection test has succeeded
    command: /d01/stage/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
    riwTDBup.sh started at Tue Oct 16 07:30:47 EDT 2012
    Parameters passed are : /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env APPS/APPS
    The environment settings are as follows ...
    ORACLE_HOME : /d01/r12/VIS/apps/tech_st/10.1.2
    ORACLE_SID :
    TWO_TASK : VIS
    PATH : /d01/r12/VIS/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/d01/r12/VIS/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/d01/stage/startCD/Disk1/rapidwiz/unzip/Linux_x64:/usr/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
    LD_LIBRARY_PATH : /d01/r12/VIS/apps/tech_st/10.1.2/lib32:/d01/r12/VIS/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/d01/r12/VIS/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/d01/r12/VIS/apps/apps_st/appl/sht/12.0.0/lib
    Executable : /d01/r12/VIS/apps/tech_st/10.1.2/bin/sqlplus
    riwTDBup.sh exiting with status 0
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
    Apps ORACLE_HOME connection test has succeeded
    Configuration Upload
    uploading config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
    AppsConfig : 'config.txt' uploading...
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : erpbeginner
    sDbDomain : dyndns.org
    sDbPort : 1521
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@erpbeginner.dyndns.org:1521:VIS
    Connection obtained
    -------------------ADX Database Utility Finished---------------
    Successful upload of config file at /d01/r12/VIS/db/tech_st/11.1.0/appsutil/conf_VIS.txt
    Environment File
    Database ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/db/tech_st/11.1.0/VIS_erpbeginner.env
    Apps ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.3/VIS_erpbeginner.env
    iAS ORACLE_HOME environment file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/ora/10.1.2/VIS_erpbeginner.env
    APPL_TOP environment file passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/VIS_erpbeginner.env
    ADOVARS environment file passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/admin/adovars.env
    APPSCONFIG passes instantiated variables test:
    File = /d01/r12/VIS/apps/apps_st/appl/admin/adconfig.txt
    DBC File
    DBC file passes instantiated variables test:
    File = /d01/r12/VIS/inst/apps/VIS_erpbeginner/appl/fnd/12.0.0/secure/VIS.dbc
    HTTP
    checking URL = http://erpbeginner.dyndns.org:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Help Page
    checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    JSP
    checking URL = http://erpbeginner.dyndns.org:8000/OA_HTML/jtfTestCookie.jsp
    RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    Login Page
    RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    When I search for the library "libclntsh", I found 3 matches to libclntsh.so.11.1,libclntsh.so.10.1 and libclntsh.so.
    Only libclntsh.so.11.1 is a file and rest are symbolic links to this file which seem to be broken.
    So I tried to redo the symbolic links and did a retry for the post install checks which failed again.
    Can somebody please shed some light on this?
    Best Regards,
    Richie

    I'm trying to install EBS R12(12.1.1) on Ubuntu 12.04 64-Bit. Please note that this OS is not certified.
    sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directoryPlease see the suggested solution in (Installing R12.0.4 Ebuisines Suite Autoconfig Fails With: sqlplus: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory [ID 579254.1]). Also, please make sure you have all RPMs installed as per (Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Linux (64-bit) [ID 416305.1]) and follow all post installation steps.
    Thanks,
    Hussein

  • Issue with reinstallation of WSUS, Post install config fails

    Hi
    I am trying to reinstall WSUS role. Steps followed
    1. Uninstallation of WSUS role and windows internal database, restarted the machine
    2. Delete the Data file from Windows\WID folder
    3. Deleted the update service registry form registries
    4. Deleted WSUS administration site for IIS.
    5. Deleted the  files from Program files\update services.( Retained WSUSutil in sub folder tools as this was not coming up with installation).
    6. Restarted the machine.
    7. Installed WSUS - Successful.
    8. Tried to run the post install configuration from console.. It errored out.
    9. Executed the command "wsusutil postinstall CONTENT_DIR=<<Folder path on WSUS server>>
    10. It erred out and the content of the error log is as below.
    2015-02-03 23:06:07  Starting service W3SVC
    2015-02-03 23:06:07  Configuring IIS...
    2015-02-03 23:06:07  Start: ConfigureWebsite
    2015-02-03 23:06:07  Configuring website on port 8530
    2015-02-03 23:06:08  System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
       at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
       at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
       at Microsoft.UpdateServices.Administration.PostInstall.Run()
       at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
    Any pointers on how to resolve this issue would be of great help. I can not uninstall IIS on this server as this is acting as only distribution point for my SCCM Setup.
    Regards
    Leela

    Hi ,
    Refer to below steps for clean uninstallation of WSUS.
    Workaround 1: To uninstall WSUS roles and features using Windows PowerShell
    In PowerShell, review features installed by calling: Get-WindowsFeature UpdateServices*
    To remove features, call: Uninstall-WindowsFeature <featureName>
    Workaround 2: To uninstall WSUS roles and features using the Server Manager Console
    In Server Manager, launch Remove Roles and Features Wizard (RRW), unselect items to be uninstalled, and complete the Wizard:
    In Server Roles tab unselect ‘Windows Server Update Services’ option
    In Features tab unselect ‘Remote Server Administration Tools -> Role Administration Tools -> Windows Server Update Services Tools’ option
    We recommend restarting the server to ensure that all WSUS components are removed. After uninstalling WSUS roles and features, you may reinstall the WSUS roles and features
    And try to reinstall. It worked for me.
    Regards,
    Arjun

Maybe you are looking for