NW Gateway 1.1 SPS06 in NW DOE System
Hi,
We are at SP level 12 and NW Gateway 1.1 SPS06 in NW DOE System. We are supposed to start the ESDMA Application Setup.
Applied all the SAP Notes with reference to latest configuration guide.
We could see that mandatory SAP Note 1624239 but, not all coding changes could be matched by the note.
Shall we implement the higher SP to the NW Mobile System (instead of implementing the note)? Or is this note not so important.
Regards,
Hi Siva,
SNOTE 1624239 cannot match the coding in Report MMW_RR_TMPL_DELEGATE_DRFILLING, and getting the message text as
"correction incompletely copied. See change display"
I could see in Source Code(Help Lines)
**Context block (not found in modularization unit)
*Delete block (not found)
*Insert block (not inserted)
"Callback was not working as expected."
Regards,
Sudharsan M
Edited by: sudharsan M on Sep 28, 2011 1:20 PM
Similar Messages
-
Trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system
I am having trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system. It will load the windows generic broadband drivers and the verizon wireless fimware updates and then it will do a search for previous versions of vz manager and it will just stay stuck on that part of the installation. I had cricket wireless broadband on here and uninstalled it and installed vz manager and it worked for a minuet, but it start acting up again. So from that point I uninstalled everything and tried to reinstall everything with the same problem.. Even after I cleaned up the registry....thanks in advance for anyone that can help me out.
I am having trouble installing vz access manager on a gateway nv5207 windows 7 64-bit operating system. It will load the windows generic broadband drivers and the verizon wireless fimware updates and then it will do a search for previous versions of vz manager and it will just stay stuck on that part of the installation. I had cricket wireless broadband on here and uninstalled it and installed vz manager and it worked for a minuet, but it start acting up again. So from that point I uninstalled everything and tried to reinstall everything with the same problem.. Even after I cleaned up the registry....thanks in advance for anyone that can help me out.
-
AudioCodes MP-118 as gateway from Lync to a Bogen intercom system
I have an Audiocodes MP-118 gateway that I need to configure as a bridge from Lync to a Bogen intercom system. I followed this guide http://www.lynclog.com/2011/04/analog-phone-support-with-lync-2010.html and that worked great for the intercom phones to
call out. They can call Lync extensions or call out to the outside world.
Where I'm stuck is that I can't call into the intercom system from my Lync phone.
So the intercom system is it's own closed phone system. The MP-118 is providing the dialtone for outbound calls (as if the MP-118 were a telecom provider) and the intercom is providing dialtone to the MP-118 for inbound calls.
I need to be able to call the assigned number and have the MP-118 pick up the Lync call and pass me the dial tone from the Bogen intercom system. I can then dial room numbers.
I created an Analog Device as described in the above guide. I can find that analog device in the Lync directory but when I call it I get ringing then disconnected. I suspect the problem is that Lync doesn't know where to send the calls. Like if it were a
normal user it would be logged in, the MP-118 isn't "logged in" to Lync.
I hope I'm explaining myself correctly. I'm very new to phone systems.Hi,
From your description above, it can be the issue of the dial plan. On Lync Server side, please double check the dial plan, make sure you set the correct translation rule for the numbers in Bogen intercom system. Make sure it collocates with the suitable
Route and PSTN Usage.
On MP-118 side, please double check the configuration as well.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support -
Connect to SAP gateway failed Connect_PM TYPE=B
Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3310' not reached TIME Tue Jan 27 16:39:54 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2823 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
0: IMTSAPDEV01_DMI_10 : Execute program: SLDRFC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDMSGSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDIPSERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSP
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDGWSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDDBSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCOMPSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCLIENT
0: IMTSAPDEV01_DMI_10 : Execute program: SLDBCSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDAPPL_SERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDASSOC
0: IMTSAPDEV01_DMI_10 : Collection of SLD data finished
0: IMTSAPDEV01_DMI_10 : Data collected successfully
0: IMTSAPDEV01_DMI_10 : RFC data prepared
0: IMTSAPDEV01_DMI_10 : Used RFC destination: SLD_NUC
0: IMTSAPDEV01_DMI_10 : RFC call failed: Error opening an RFC connection.
0: IMTSAPDEV01_DMI_10 : Existing periodic jobs removed. Number: 1
0: IMTSAPDEV01_DMI_10 : Program scheduled: 20090127 184357
1: IMTSAPDEV01_DMI_10 : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add itHi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
Details of remote gateway
entry = 0
state = CONNECTED
local = 1
system type = REMOTE_GATEWAY
client = FALSE
wait for frag write = 0
suspended = 0
read/write socket = 4
HANDLE = 4
TIME = Sun Oct 19 18:54:14 2008
SOCKET = 1352
STAT = NI_CONNECTED
TYPE = STREAM IPv4
OUT = 48225 messages 48225 bytes
IN = 1 messages 64 bytes
LOCAL = 127.0.0.1:3310
REMOTE = 127.0.0.1:1297
OPTIONS =
connect = Sun Oct 19 18:52:17 2008
last request = Thu Jan 29 13:09:58 2009
conversation no = 0
thanks and regards,
dilanke -
Requirements Gateway - Searching for requirements in table rows in a Adobe PDF file
In my quest for creating a good understanding of the coverage of requirements of my test cases I download the NIRG (NI Requirements Gateway) and started out importing my SRS (System Requirement Specifications) documents and some of the test cases. There are many different types of sources which can be imported (Word, Excel, Visio, Access, PDF, ...) and NIRG uses REGEX (Regular Expressions) for extracting the requirement and coverage information of the sources. NI have defined some standardized REGEX formats but they (NI) have also made it possible for tweaking these to fit your purpose.
Instead of adding/changing the SRS documents to fit these standardized REGEX formats, I dived into how to create REGEX for my purpose.
Check out
- http://www.regular-expressions.info/
- http://opencompany.org/download/regex-cheatsheet.pdf
NI Requirements Gateway Coupling Series
(http://zone.ni.com/devzone/cda/tut/p/id/8414)
NI Requirements Gateway for Test, Measurement, and Control Applications
(http://zone.ni.com/devzone/cda/tut/p/id/3721)
Is there anyone who have any experience on using NIRG on a PDF document to get information from the rows in a table?
Best Regards,
Marcus
Marcus Törndahl
Senior Software Designer @ Prevas ABHi Manooch_H,
Here is the example document and thank you for taking the time and helping me out .
The columns which I would like to import into NIRG are actually all of them. The UC, Verification, Priority and Responsible columns should be imported as attributes to the requirement. The ID and Requirement columns should be imported as the Requirement and Text respectivaly.
Best regards,
Marcus
Marcus Törndahl
Senior Software Designer @ Prevas AB
Attachments:
SRS.pdf 212 KB -
Max no of gateways exceeded (100)
Hi guys
Suddenly, I start to receive error messages about the RFC failure, No changes done in Basis related.
There are RFC error any many areas;
SM21 - I Maximum number of 100 connectable SAP gateways reached\
STMS - RFC communications error with system/destination TMSADM-PRD.DOMAIN_DEV
Sm59 - we cannot verify the RFC Connection
Please advise us on base of SOS
Regards
Anwer WaseemHi
Thanks for the expert reply, i did same as below described, there are 6 clients in the "logged clients" by the smgw.
0 DBSERVER1 sapgw02 Local Web AS DBSERVER1 ip dbserver1 Wed Jun 25 09:02:42 2008 Connection OK
1,037 DEV sapdp01 Remote Gateway DEV ip dev Wed Jun 25 08:38:04 2008 Connection OK
1,229 ip dbserver2 sapdp02 Remote Gateway ip dbserver2 ip dbserver2 Wed Jun 25 09:02:12 2008 Connection OK
1,292 QAS sapdp01 Remote Gateway QAS ip qas Wed Jun 25 08:38:04 2008 Connection OK
1,319 DBSERVER jlaunch External Client DBSERVER ip dbserver1 Wed Jun 25 09:02:12 2008 Connection OK
1,377 DBSERVER1 IGS.PRD Registered Server DBSERVER1 ip dbserver1 Wed Jun 25 09:02:38 2008 Connection OK
RFC Trace file
============
Sun Jun 22 15:01:03 2008
***LOG Q14=> GwIConnectHandle, max gateways (100) [gwxxrd.c 8504]
LOCATION SAP-Gateway on host DBSERVER1 / sapgw02
ERROR max no of gateways exceeded (100)
TIME Sun Jun 22 15:01:03 2008
RELEASE 700
COMPONENT SAP-Gateway
VERSION 2
RC 631
MODULE gwxxrd.c
LINE 8505
COUNTER 112523
I am unable to verify the RFC and unable to transport from QAS to PRD
Regards -
SAP Netweaver gateway in solution manager
Hi ,
We have a solution manager 7.1(netweaver 7.02) and ECC IDES EHP 6 system for which we need to configure Netweaver gateway. We have installed netweaver gateway 2.0 components in solution manager system. Now is it possible to configure gateway on solution manager system instead of building a separate netweaver system for configuring gateway.
Wondering if we can make solman as gateway system for accessing ECC IDES. Please give your suggestion and steps to perform.
Regards,
PrakaashHi Prakaash,
For overall installation prerequisites for SAP NetWeaver Gateway 2.0
components, please have a look in the installation guide -> Installation
Prerequisites:
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/52/fc994f456a4573957461be15520fe8/frameset.htm
Quick Starter Configuration Guide - SAP NetWeaver Gateway:
Quick Starter Configuration Guide - SAP NetWeaver Gateway
The meaning for 'embedded deployment', below:
http://help.sap.com/saphelp_gateway20sp04/helpdata/en/62/91ad98b19b4a91bca737fbe442273f/content.htm
please refer to the below link for different deployment scenarios,
http://help.sap.com/saphelp_gateway20sp04/helpdata/en/88/889a8cbf6046378e274d6d9cd04e4d/content.htm
also,
http://help.sap.com/saphelp_nw04/helpdata/en/90/cbde3f7bc1eb06e10000000a1550b0/content.htm
how to configure SAP NetWeaver Gateway in the SAP ONline Help
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/4c/a670b0e36c4c01ae2b9a042056f9dc/frameset.htm
Note 1569624 - Installation/Delta Upgrade of SAP NW Gateway 2.0
1560585 - SAP Netweaver Gateway 2.0 Release Note
1417757 - System logon, determining client and language
Thanks
vikram -
Hi
we have a oracle database version 11.2.0.1
now we have instlled database gateways 11g in sql server machine and created db link in oracle and working fine
Now my question is:
Windows 2003 server having sql server and 11g Gateways installed
But oracle database is 10g............if i create link in Oracle it will work?
because 11gR2 gateway will synch with Oracle 10g database.
Thanks
ShaikHi Joe,
yes it is possible. All you need is a suitable ODBC driver and the Database Gateway for ODBC.
There are documents available within the Oracle Support knowledge base (htp://support.oracle.com). As you didn't specify your preferred platform here a list of possible notes:
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install [Document 466225.1]
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install [Document 1266572.1]
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install [Document 561033.1]
How to Configure DG4ODBC on Linux x86 32bit or on HP-UX RISC (DG4ODBC 11.1 only) to Connect to Non-Oracle Databases post install [Document 466228.1]
- Klaus -
GATEWAY INSTALL GUIDE FOR MS SQL SERVER
제품 : GATEWAY
작성날짜 : 1999-04-27
how to install the gateway for MS SQL server
Software 요구 사항:
Operating System: Windows NT 4.0
Oracle Server: Oracle8 Server Enterprise Edition Version 8.0.4.0.0
Oracle Networking: On gateway: Net8 Server Version 8.0.4; Oracle Adapter
On Oracle: Net8 Client Version 8.0.4; Oracle Adapter
Microsoft: Network transport protocol software, included with Windows NT
ODBC Driver Manager Version 2.x or 3.0 (included with Microsoft ODBC
Software Development Kit)
ODBC SQL Server Driver Version 2.5 or 2.65
SQL Server Version 6.0 or 6.5
Installing the Gateway:
Step 1: Log on to the Windows NT machine
Step 2: disk space 확인; 약 50Mb 정도가 gateway 설치를 위해서 필요
Step 3: Stop all Oracle NT services
Step 4: Run setup.exe from Stage area (\\guest01-osd\tgmsql804ship)
Step 5: Choose Language
Step 6: Oracle Home 의 위치 설정
Step 7: Installation 방법을 설정. Custom Installation 을 선택하여
the Transparent gateway 제품 선택
Step 8: Click on [Install] button
Step 9: Net8 adapters 가 install 되지 않았다면 install 할 것
Step 10: Reboot your machine제품 : GATEWAY
작성날짜 : 1999-04-27
how to install the gateway for MS SQL server
Software 요구 사항:
Operating System: Windows NT 4.0
Oracle Server: Oracle8 Server Enterprise Edition Version 8.0.4.0.0
Oracle Networking: On gateway: Net8 Server Version 8.0.4; Oracle Adapter
On Oracle: Net8 Client Version 8.0.4; Oracle Adapter
Microsoft: Network transport protocol software, included with Windows NT
ODBC Driver Manager Version 2.x or 3.0 (included with Microsoft ODBC
Software Development Kit)
ODBC SQL Server Driver Version 2.5 or 2.65
SQL Server Version 6.0 or 6.5
Installing the Gateway:
Step 1: Log on to the Windows NT machine
Step 2: disk space 확인; 약 50Mb 정도가 gateway 설치를 위해서 필요
Step 3: Stop all Oracle NT services
Step 4: Run setup.exe from Stage area (\\guest01-osd\tgmsql804ship)
Step 5: Choose Language
Step 6: Oracle Home 의 위치 설정
Step 7: Installation 방법을 설정. Custom Installation 을 선택하여
the Transparent gateway 제품 선택
Step 8: Click on [Install] button
Step 9: Net8 adapters 가 install 되지 않았다면 install 할 것
Step 10: Reboot your machine -
Oracle gateways 11g to connect sybase
Dear Gurus,
Is there any document/tutorial related to oracle gateways 11g.
I want to use oracle gateway and odbc to connect sybase.
How to connect sybase from oracle database?is possible using dblink?
Thank you
JOEHi Joe,
yes it is possible. All you need is a suitable ODBC driver and the Database Gateway for ODBC.
There are documents available within the Oracle Support knowledge base (htp://support.oracle.com). As you didn't specify your preferred platform here a list of possible notes:
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install [Document 466225.1]
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install [Document 1266572.1]
How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install [Document 561033.1]
How to Configure DG4ODBC on Linux x86 32bit or on HP-UX RISC (DG4ODBC 11.1 only) to Connect to Non-Oracle Databases post install [Document 466228.1]
- Klaus -
Migrate Users from Backend to DOE
As part of a project, we would like to migrate the Users from the CRM Backend to the DOE to save time and not creating them manually.
I couldn't find any hint how to do this, the only thing i found is the Activation of AUTH_DWLD_BE_DEST in the DOE Portal. But how do i load all Users from the CRM to the DOE?
Thanks in advance,
Tobias AbbIn the same link, there are steps to download user authorizations and user details under the menu item 'Setting up Users in Data Orchestration Engine'. This will fetch the users from your configured backend destination (CRM in your case) and persist them in the DOE.
However, this will not create users within the DOE. It will only download their identities as specified in the backend itself, and these attributes are enough (and also necessary) to assign these users to devices.
You can set up a job to automatically pull the deltas from the backend every week or so, so that the data is up to date in the DOE.
However, creation of users in the DOE automatically upon creation of a user in the backend needs to be via some sort of push from the backend itself. i.e. Say you have a report in the backend which you use to create users. You can probably use APIs exposed by BASIS to push such users to the DOE system (i.e. remotely create them in the DOE system) whenever this report is used to create a user in the backend. This activity however is outside the purview of the DOE itself, since it must be initiated by the backend.
EDIT: You can also try the transaction 'SDOE_MIGRATION'. If you select 'Generic synchronization' and choose 'Migrate Users' only, you might be able to pull data from the CRM system. However, the report is actually intended to pull users from the old MI version for customers upgrading from older versions of MI to the DOE (7.10) who want to retain their middleware users in their new middleware system. However, I am not sure how this will turn out.
Edited by: Arjun Shankar on Oct 13, 2009 8:45 AM -
SRA gateway - performance problems
Hi!
I'm experiencing slow response with SRA gateway when I stress the home page in a site www.example.com. I redirected the SRA default home page to a custom application home page.
In my deployment, I have one machine with SRA 2005Q1 and my application is running in another machine with Application Server 7 EE UR4.
I stressed the application with two tools: Jmeter and Pureload, getting the same results. I put only one worker, 1 thread and 20 iterations, so it's a very low load for the response that I'm getting.
When I test the application directly, without SRA, I get a very good average response of about 300ms, but when I test the application with SRA gateway protecting the application, I get an average response from 12 to 16 seconds!
I followed all SUN tuning recomendations and ran the perftune script and still got the same results.
When I execute the stress tests, the processor has a load of 4% and the memory usage is 14%.
After analyzing the results I noticed that the main page loads quickly but the average load time of the images is very high. I searched in sunsolve for similar problems with SRA slow loading of images and static content, but I didn't find anything.
Anyone has the same problem? any ideas how to solve it? where can I find more documentation?
thx in advance. Hjuarez :)Hi There.
First off, I'd do a few things, what's your threadpool set to? default is 200, i'd bump this to 500.
Honestly, I'd test it with NO TUNING, (method of my madness) IE your 'gateway' script CMD variables, Just modify the min and max memory setting, default is 64 and 128, i'd set it to 128 and 1024-2048, and remove all over tuning suggestions (unless you have GC monitoring variables.
my portal system get's 220,000 logins a month, and my gateway is a 280R 2x900mhz sparc 3 system, and it's extremely fast (well, as fast as the gateway goes anyhow :-) )
- I'd be interested to see your results, I have 2004Q2 on my system. there's various other factors in play here, but I tried a 'tuned' gateway, and it was 25-30 % slower then 'untuned' and i've been running my gateway with this minimal tuning since oct 05. I've had no stability problems.
in your amconsole gateway setup area, do you have persistent connections on or off? on=faster throughput, but on my system cause JSS/NSS issues, and gateway coredumps, so it's off right now.
Dave
PS how is jmeter and pureload working for you? -
RSA Secure ID ACE/Server and gateway IDM
Hi all,
we are trying to integrate and RSA server with IDM 6.0SP2.
I do not understand this phrase on resource references doc.
If SecurID is installed on Windows, the Identity Manager gateway must be running on
the same system where the RSA ACE/Server is installed.it means that the gateway from RSA server must run on the same server where is running RSA ?
Someone has integrated the appliance RSA installing on it the gateway ?
Thanks,
mazantThe port should be 9278. Enable the gateway trace and see if it is logging anything to the trace file.
-
Hi,
we are trying to build Restful services using using netweaver Gateway, and have just going through the documentation and blogs in sdn being beginners .
In our landscape,
Gateway addons are installed on SAp bacjend system from where i need to pull the data say System A.
Gate way server is installed on different machine say System B.
Now Should i create GW data models on backend system System A and GW consumption model on Gateway system System B?
Most of the blogs are written ,wherein both of them aer running on same system?
Any pointers will be appreciated.
Regards
chandraHi chandra,
NetWeaver Gateway system needs 2 data model definition.
One is for provider side (SAP side) and the other is consumer side.
Regarding provider side SAP system discloses meta data such way as WSDL, so we can generate data model automatically by using NWGW proxy generator.
On the other hand consumer side data model should be defined by hand.
And of cocourse we should map-program between provider side and consumer side.
Regards -
we had installed 2005q4m3 sp1 and new gateway.
I did gateway -i to install and gateway -s to start the gateway and got this error.
C:\Program Files\SunIdentityManager6\gateway>gateway -i
06/05/2007 10.54.24.021000 [14356] (../../../../src/wps/agent/logging/WSTrace.cp
p,150): trace active, level: 4, file: C:/gatewaytrace.txt, maxSize: 500 KB
06/05/2007 10.54.24.021000 [14356] (../../../../src/wps/agent/logging/WSTrace.cp
p,108): In WSTrace::init()
06/05/2007 10.54.24.021000 [14356] (../../../../src/wps/agent/logging/WSTrace.cp
p,109): Gateway version: 'Sun Java System Identity Manager 6.0 SP1'
06/05/2007 10.54.24.031000 [14356] (../../../../src/wps/agent/logging/WSTrace.cp
p,110): OS version: 'Windows Server 2003 Family Service Pack 2 (Build 3790)'
An error occured when trying to install the service: No error
C:\Program Files\SunIdentityManager6\gateway>gateway -s
06/05/2007 10.54.35.087000 [15692] (../../../../src/wps/agent/logging/WSTrace.cp
p,150): trace active, level: 4, file: C:/gatewaytrace.txt, maxSize: 500 KB
06/05/2007 10.54.35.087000 [15692] (../../../../src/wps/agent/logging/WSTrace.cp
p,108): In WSTrace::init()
06/05/2007 10.54.35.087000 [15692] (../../../../src/wps/agent/logging/WSTrace.cp
p,109): Gateway version: 'Sun Java System Identity Manager 6.0 SP1'
06/05/2007 10.54.35.087000 [15692] (../../../../src/wps/agent/logging/WSTrace.cp
p,110): OS version: 'Windows Server 2003 Family Service Pack 2 (Build 3790)'
06/05/2007 10.54.35.097000 [15220] (../../../../src/wps/agent/util/ThreadRunner.
cpp,61): Waiting for request event
An error occured when trying to start the service: No such file or directory
Can anybody point me what could be going wrong here?
Thanks.Im using IDM 7.1. The gateway suddenly stopped working. Even after System restart & reinstallation of gateway, it's still not getting started. It there anything that I should do more.
Maybe you are looking for
-
BI Apps Migration from 7.9.6.1 TO Apps 7.9.6.3
Hi, Currently we using Bi Apps 7.9.6.1 and want to update 7.9.6.3 and we also want to upgrade OBIEE10 (10.1.3.4.1) to 11g (OBIEE 11.1.1.5.0). Is it possible? if it is possible then Oracle Metalink or any reference document please. Want to Upgrade to:
-
Animate layers quickly and easily by using animation presets. Drag and drop animation presets onto layers in the Timeline panel and combine them for a unique result. http://adobe.ly/ytXsgl
-
Which of these computers are better than
im a graphic designer and I want to buy one of these Which do you think is better 1.macbook pro 2.66 Ghz Intel Core 2 Duo 4 gb ram NVIDIA 9400 and NVIDIA 9600 GT dual graphics 2.macbook pro 2.4GHz Intel Core i5 4GB 1066MHz DDR3 Intel hd Graphics5 and
-
Some albums not listed under artist.
Some albums appear in the Albums list but not in the Artist/Album submenu. eg; I have 2 albums by Sigur Ros but only one shows when I go: Artist/Sigur Ros - Album. I only see one. I see both under the Album list. Any thoughts appreciated...
-
On sunday, my phone randomly decided to stop receiving emails (nokia messaging), but would still send them. This went on until i flashed it yesterday, at which point it did receive them again, all day, night, and into this morning. I reflashed again