NW Gateway 2.0 and NW Mobile

Hello,
I would like to ask the following: if we want to build a system landscape that supports EAM Work Order (which requires NW Mobile) and Productivity apps (which require NW Gateway 2.0), can we install both add-ons on the same NW AS? If I am correct, until recently we would need two separate installations of NW AS. Is it still the case? I searched for information online, bt did not find anything relevant. Could you please assist me on this issue?
Thank you and kind regards,
Stella
Edited by: Styliani Taplidou on Feb 13, 2012 10:54 AM

Hi Styliani,
I have tried NW Mobile + Gateway 1.1.
Logically it should be possible as Gateway requires ABAP AS instance which NW Mobile is..
Not tried myself
Regards,
Ram.

Similar Messages

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

Two weeks ago I was updating my phone. It went in recovery mode and messed up my iTunes and phone. I've tried reform lading iTunes and mobile me and apple mobile support will

Two weeks ago I was updating my iPhone 4 to the new software. As soon as it was done it sent my phone into recovery mode. I talked to apple support line four times and they could not figure it out. I got frustrated after two days of
Not being able to use my phone and went to the apple store and had them restore it. When that happened it of
Course deleted all my stuff on my phone. When I was talking to apple support on the phone they told
Me that my computer was not downloading mobile me or apple mobile support. I've never had problems before until I tried updating it. So now Ive tried
Reinstalling iTunes and my computer will not dl mobile me or apple mobile support. I went to their support online and followed some
Of their stuff to try to fix and disabled Something and it told me to restart my computer and so I did and now I can't find the page where it was giving me the directions for it bc when I disabled programs it somehow disabled to where I can't get on the Internet. My phone works fine now just don't have my numbers, music, apps, ringtones pictures etc. The problem is now my computer, iTunes, my Internet connection, and mobile me and apple mobile software. Please help!

rjnorred wrote:
.... If I restore the phone in iTunes, will I be able to get to my Cloud data?
When Prompted in the Restore process... Choose Restore from iCloud Backup...
Full Details here > http://support.apple.com/kb/HT1414

Can anyone help with iPlayer and Sky Mobile?

Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
BBC iPlayer
Sky Mobile*
YouTube
*I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...

About iPlayer.
Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
Mine only works over Wlan.
FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
p.s. Just to be clear. You say "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone).

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please researc

I currently use an iPhone, an iPad, and a Mac computer for business. The three devices have Contacts Managers that sync with each other through both Google and through Mobile Me. Currently, this has created a mess of duplicate contacts. Please advise me on the steps necessary for removing these duplicates and establishing a syncing solution that doesn't regenerate the duplicates. There are several applications available that remove duplicates, but I am not sure which ones work or don't work. I want information on this, but most importantly I want to understand how to fix this problem permanently. Also, I read somewhere that Mac's new operating system, Lion, can help deal with duplicates. I don't have Lion, but I would be willing to get it, if this would fix the problem.

Had the same problem with 4 devices (two computers, an iPhone and an iPod). The solution is simple: open the Address Book application in your mac, ask it to locate duplicate entries (under one of the top menu items, "edit" I think), and then ask it to consolidate them: it took me all of three seconds after I figured it out: worked like a charm! PS: if you have more than one mac with unconected Address Books, repeating the operation in the second one may be a good idea.
Message was edited by: mfduran

I have an apple id which I have been happily using to purchase from iTunes and it appears on iPad and iPhone. Now I have done something wrong in iCloud and my mobile me Id comes up on iPhone and iPad so I can no longer purchase. What should I do.

I have an apple id which I have been happily using to purchase from iTunes and it appears magically on iPad and iPhone, MacBook and partner's iPod touch. Now I have done something wrong in iCloud and my mobile me Id comes up on iPhone and iPad so I can no longer purchase using this and i can't find a way to reset What should I do? I want to be able to buy apps from iPhone and iPad from this same account and still synch with my mac book and share with my partner's iPod touch.
Any suggestions?

We are users, not Apple. We cannot trace your phone, and neither can Apple.
Please change every password you have. Posting your email addresses and Apple IDs on a public forum is insane. Hopefully a Mod will edit them out for you.

How can I swap phone numbers between Verizon and T-Mobile phones?

I have Verizon and T-Mobile phones. My wife uses the T-mobile phone and I the Verzion phone. I was given a GSM iPhone 5 that I want to use on the T-mobile account, so I want to move the Verzion phone number to the T-Mobile phone and the T-Mobile number to the Verzion phone. I do not want to have to inform all our friends about the number swap. I also would like to maintain phones on different networks for reliability and connectivity assurance.
I called the Verizon wireless number and the person couldn't help me. The best I can figure out is to give up on Verizon and move the Verizon phone number to a new T-mobile account.
Any ideas?

They are both 4g phones correct? All verizon phones come unlocked. If the verizon phone works with tmobile all you do is take the sim card out and stick it in the phone. however when you do this it is going to erase everything on the phone so make sure you back it up before swaping sim. As far as using the tmobile phone with verizon you would need to ask tmobile if the phone is unlocked

ICloud is not working and still mobile me conflicting with icloud on lion

I am really starting to lose faith in Apple ever since I got this icloud problem on my macbook pro.. Everytime when I do something with icloud, it kept asking my old mobile me account and saying 'mobile me' services are no longer available.. how can I totally wipe out old mobile me from my macbook pro and running only with icloud?? Also why my Pages is not syncing with icloud or there is no option to upload?? Although I activated 'icloud' from my system preference, I cannot find 'mobile document' folder anywhere on my mac?? Someone could help me??

I am in Belgium: same problem since this morning. My email sometimes works, then stops working again and this on all devices + browser access to icloud.com. I called Apple support (based in the Netherlands it seems). I was told they are aware of the problem and asked me "for a few days patience". A FEW DAYS? In what century is Apple expecting us to live? Is that the kind of support Apple expects us to accept for a PAID service? Unfortunately it is not the first time me.com or now icloud.com does not work as it should. Every time I call support I get the same answer "it should work again soon". What is even more annoying is to read on the Apple web site the statement that all services are running fine! On what planet? It is really sad that Apple does not even recognize there is a problem. Apple customers are loyal but Apple inc needs to learn there are also limits to loyalty. If I am supposed to use my icloud account for business communications then I should be able to rely on that service. Being offline for days is not an option. Wake up Apple inc.!

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

Have you looked at this article:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device support will not delete. Now I can't download itunes. Help!!

Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device would not uninstall. Now I can"t download itunes. Help!!

apple mobile device would not uninstall.
Try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
Fix problems with programs that can't be installed or uninstalled

How to display html content with image in Adobe Flash and Flex mobile project?

Hi,
I have a html content with image in it. How to display it in Adobe Flash Builder and Flex mobile project? Which control needs to be used for this?

Hello,
The only current way is to use an iFrame, or if you only need some html tags you could use the Text Layout Framework.
Here this is the iFrame approach:
http://code.google.com/p/flex-iframe/
If the swc do not work in Flex4 just use its ource code which works...
...it is basically based on this:
http://www.deitte.com/archives/2008/07/dont_use_iframe.htm
see also and vote, please:
http://bugs.adobe.com/jira/browse/SDK-12291
http://bugs.adobe.com/jira/browse/SDK-13740
Regards
Marc

My Apple ID is changed from hotmail domain to icloud how come? and my mobile now doesn't work

I have iPhone 4 i make rest to delete data my Apple id: ****** the mobile change the domain to the same usr name @icloud.com how come? and my mobile doesn't work now and my recovery email dont work also. how can i activate my iPhone and use it pls?
<Email Edited By Host>

Contact iTunes by:
Contact iTunes

Difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft

Hi Experts ,
Can anyone tell me the difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft ?
Best Regards,
SK

SAP Netweaver Gateway 2.0 is a product for Exposing ERP data as OData for external consumption which is independent of any Microsoft product. Using this you can model OData services and Expose them for light weight consumption. You can use this in use cases where you just want to consume the OData in some client or so, and you do not want any kind of accelerators to help you in development or in your integration.
GWPAM is an interoperability framework from SAP that leverages SAP NetWeaver Gateway and Microsoft technologies enabling customers and partners to easily and quickly compose solutions that consume and extend SAP throughout Microsoft technologies for on premise and on demand deployment. With GWPAM you get components like
GWPAM Visual Studio Add-On,GWPAM Template,GWPAM Project,GWPAM Outlook Add-In which are very much Microsoft specific.

320PPI 5cm x 5cm , and the mobile app that this image appear runs on a mobile phone of 200ppi disp

IF I DO AN IMAGE in FW or PS of 320PPI 5cm x 5cm , and the mobile app that this image appear runs on a mobile phone of 200ppi display resolution, then resolution seem of image should be 200ppi ... in other words should adapt automatically????

Only if you were to measure the physical dimentions. (Using physical dimentions and changing the ppi would add or remove pixels)
inches X ppi = pixels
A 1200 x 1600 pixel image will be the same on all devices that share that ratio, the ppi difference comes into play when the phyical size of the screen is changed.
Technically the quality never changed only the zoom changed.
When designing a screen at 1200x1600 (example) That image will fit on any screen that has that spec.
The ratio plays a role when only 1 of the 2 pixel dimentions changes (width or the height).
On larger screens, the ppi is lower to equal the same number of pixels. So when a device can support a higher resolution, the ppi is increased on the same size screen.
Knowing that, having the specs of the device will tell you the maximum number of pixels that screen can display.
Therefore, when designing a screen, always start with the largest resolution (pixel dimmentions) first, then downsample to the next size screen and so on.
The reason is simple, it is easier to remove pixels, then it is to add them later, as photoshop or any other software does not know what should be there.
BTW, this is also the reason why you can change the pixel dimentions in the save for web dialog box and not the physical size or ppi. To make it easy to reduce the pixel dimentions.

NW Gateway 2.0 and NW Mobile

Similar Messages

Maybe you are looking for