NW PI 7.1 Install FKD-00048 Unable to open URL file:///tmp/sapinst_instdir

HI,
I am installing PI 7.1 on a HP-UX/ Oralce environment. Started the install and when It prompted for Oracle Software, I stopped the install and installed Oracle.
When starting back SAPINST after oracle install it terminates with the following error :
guiengine: 2011-03-18 07:26:03 Login in progress
guiengine: 2011-03-18 07:26:03 Login successful
ERROR 2011-03-18 07:26:50.304 [sixxcpars.cpp:179]
FKD-00048 Unable to open URL file:///tmp/sapinst_instdir/NW71/INSTALL/SYSTEM/ORA/STD/AS/control.xml.
Abort execution because of
keydb.unableToOpenURL
Nothing has been moved from the /tmp directory.
Any help would be appreciated
Thanks
Christo

Hi,
It looks like problem /tmp file system. Generally contents in this file system are temporary.
I think you have to start the installation again but this time I would suggest you to not use /tmp as installation directory.
Thanks
Sunny

Similar Messages

I have Adobe reader installed. However, I am unable to open some files because it is asking for Adobe's approval to open the files. How do I do this please?

I have Adobe reader installed. However, I am unable to open some files because it is asking for Adobe's approval to open the files. How do I do this please?

That message is NOT from Adobe, and has nothing to do with Adobe's approval for anything.
Quite the opposite: Adobe Reader is NOT YET RUNNING, Adobe aren't involved. Some other app or program is putting out that message. Have you tried giving that permission?

ERROR: Unable to open TUXCONFIG file

Hi,
I installed and installed the following software successfully on Windows XP
Oracle WebLogic Server 11gR1 (10.3.1) Microsoft Windows
PeopleSoft Enterprise PeopleTools 8.50
PeopleSoft Enterprise Human Resources Management System 9.1 - Revision 2
Tuxedo 10gR3 for MS Windows Server 2003 w/MS VS 2005 (32-bit x86, AMD64/EM64T x64) 32-bit
i am at the point of installing the Application Server. Domain created sucessfully but i got boot errors as shown below.
I searched for the TUXCONFIG file but could not find it in the tuxedo installation folder.
I read that i have to create the TUXCONFIG,if missing, using tmloadcf.exe and the ubbconfig file, but the only UBBCONFIG file is located in "\samples\atmi\rpcsimp\" folder.
How do i create the TUXCONFIG file?
Did i miss something with the installation? What location should this file exist after your tuxedo installation?
thanks
K
BOOT ERRORS:
PeopleSoft Domain Boot Menu
Domain Name: hrms
1) Boot (Serial Boot)
2) Parallel Boot
q) Quit
Command to execute (1-2, q) [q]: 1
Attempting to boot bulletin board...
tmadmin - Copyright (c) 2007-2008 Oracle.
Portions * Copyright 1986-1997 RSA Data Security, Inc.
All Rights Reserved.
Distributed under license by Oracle.
Tuxedo is a registered trademark.
No bulletin board exists. Entering boot mode.
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents an
d Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:588: ERROR: Unable to open TUXCONFIG file
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:6272: ERROR: Unable to get bulletin board par
ameters
115818.SU1491!tmboot.2652.1488.-2: CMDTUX_CAT:825: ERROR: Process PSWATCHSRV at SU1491 failed w
ith /T tperrno (TPESYSTEM - internal system error)
115818.SU1491!tmboot.2652.1488.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; init
iating user error handler
115821.SU1491!BBL.2956.4352.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
115825.SU1491!PSADMIN.3088: End boot attempt on domain hrms
Edited by: user2932595 on Apr 17, 2010 1:17 PM
Edited by: user2932595 on Apr 17, 2010 1:21 PM

Hi
The TUXCONFIG file normally is created automatically when you create your domain.
In this case I think you ran into trouble because the path of installation is too long!
Note the error in your log:
115818.SU1491!PSWATCHSRV.5832.6140.-2: LIBTUX_CAT:1519: ERROR: TUXCONFIG value (C:\Documents and Settings\klondon\psft\pt\8.50\appserv\hrms\PSTUXCFG) is longer than the allowed length of 64
Your path is 69 chars long!
I would suggest that you re-try the configuration with a shorter tuxedo and PS_HOME: perhaps in the root directory (c:\PSHOME)
In the past I've also noticed that installations have problems with paths that have spaces - ex: 'Documents and settings' , so I would avoid that as well.
Edited by: Alternate on Apr 19, 2010 2:00 AM

"Unable to open config file" Error when starting tomcat

hi all,
Here is the output from two of the log files when I start tomcat4 on my linux box. I have configured the mod_jk on the tomcat side.
From the output of the second log file, it seems that the ajp13 worker I defined was started successfully. What I don't understand is the following:
1) In catalina.out, where des the line 'Unable to open config file' come from? Which config file?
2) Tomcat4 is supposed to generate a mod_jk.conf automatically, but I don't see any file generated in 'conf/auto/'.
Content of 'catalina.out'
Unable to open config file
Starting service Tomcat-Standalone
Apache Tomcat/4.0.4
Unable to open config file
Starting service Tomcat-Apache
Apache Tomcat/4.0.4content of 'catalina_log.2002-08-16.txt'
2002-08-16 01:05:22 HttpConnector Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Opening server socket on all host IP addresses
2002-08-16 01:05:28 Ajp13Connector[8009] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][0] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][1] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][2] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][3] Starting background thread
2002-08-16 01:05:29 Ajp13Processor[8009][4] Starting background thread

I have all those files too.
I think the 'config file' mentioned in the error log is the mod_jk.conf.
On Jason Hunter's tomcat4 guide, it says don't use the tomcat4 RPM to installed. What is the difference bettween the RPM version and the tar.gz version? The only difference I can think of is that in the RPM version, the conf directory is in the 'etc/tomcat4/conf'. Could it be the reason that tomcat4 cannot read the config file? But it has no problem reading the server.xml though.

Unable to open RAW files in CS6 after update

Hi all,
I have Photoshop CS6 and have been able to open my D4 Raw files with no issues using the Camera Raw version 7.1 plugin.
Yesterday I upgraded my Mac OS from Snow Leopard to Yosemite (a big jump I agree) and proceeded to update Photoshop to the latest version as well as installing Adobe DNG Converter 8.8.
I am apparently still using the same 7.1 plugin version as I always have but I am now no longer able to open any RAW files through Photoshop as it displays a message saying 'files not recognised' when I try to open them.
Have I skipped too many updates? Do the latest Photoshop CS6 updates leave me unable to open RAW files? Am I being pushed down the CC route?
Could anybody offer any help at all as I have a wedding to edit but cannot open any files!!! Stress!!!
I backed up my system through Time Machine before I did the update but im not sure if I restore that I will still have Yosemite OS running.
Any help or advice really is appreciated.
Many thanks.
Phil

Camera RAW should be at version 8.8 for CS6
Adobe - Photoshop : For Macintosh
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am unable to open some file because there is "encrypt contents to secure data" attribute applied by me before format my pc

Please see this chat session
Shayne M:
3:03:06 PM
Hi, thanks for visiting Answer Desk! I'm Shayne M.
You:
3:03:24 PM
Hi! I am Surendra from Lucknow Inida.
Shayne M:
3:03:37 PM
Hello
How can I help you?
You:
3:05:35 PM
Madam my some file in green color and i am unable to open these file because there is encryption attribute applied by me some time before and now i am unable to remove encryption from my files
because today I format my system please help me
Shayne M:
3:06:01 PM
oh, sorry to hear that.
may I know what type of files is that?
is that a word file?
You:
3:07:37 PM
many type files excel pdf doc docs and many more some programs also encrypted, and some folder also encrypted.
Shayne M:
3:07:48 PM
I see.
may I know what version of windows do you have?
You:
3:08:53 PM
Window 7 Professional
Shayne M:
3:09:16 PM
I see, thanks.
Click here (Link Silverlight)
you can try that link
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or dial that number for Microsoft India.
any other questions for me?
You:
3:10:34 PM
I am downloading silverlight.exe please wait
Shayne M:
3:10:41 PM
okay.
please try the link I gave you, if that will not work, feel free to contact us back so we can look for any other options for you,
you may also contact the number I gave you for Microsoft India support.
You:
3:13:40 PM
program install successfully what to do now ?
Shayne M:
3:13:59 PM
please follow the intructions I gave you.
it's on the link.
You:
3:14:45 PM
please repeat
Shayne M:
3:14:53 PM
Click here
(Link Silverlight)
there you go,
if that will not work,
feel free to contact us back
You:
3:15:11 PM
please wait i am reading
Shayne M:
3:15:23 PM
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
or you may dial that number/
just take your time reading that. I cannot stay any longer Surendra.
anything else?
You:
3:17:18 PM
I am unable to remove attribute till now
Shayne M:
3:17:28 PM
alright,
you may contact the number I gave you for further assistance.
Dial toll-free: 1800 102 1100 or 1800 111 100
Direct dial: +91 80 40103000
that's Microsoft for India.
You:
3:18:43 PM
ok
Shayne M:
3:18:43 PM
anything else?
Thank you for contacting Microsoft Answer Desk, you Have a Great Day,Take care.
You:
3:19:04 PM
thank you
Shayne M:
3:19:10 PM
you're welcome.
Your Answer Tech Shayne M has ended your chat session. Thanks for visiting Answer Desk.

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

E70 PDF Reader : Unable to open. File type not sup...

This morning I have bought an E70, among others due to its highscreen resolution and the possibility to run a PDF reader on it.
I have now tried ...
  - the pre-installed Adobe PDF Reader
  - the Adobe PDF Reader supplied with the PC Suite CD-ROM
  - the Adobe PDF Reader available on europe.nokia.com
I am fascinated by a software which presents itself in the About box as '1.5', prompts during installation for '1.0.5' and has filenames '1_5_0'.
Apart from minor variations in the SIS filenames they all share the same annoying feature: They refuse to display any of my PDF files but display a message 'Unable to open. File type not supported. 5. !' instead.
It doesn't seem to be a problem of the PDF files, since a collegue of mine was able to open them on his E61 or E70 (forgot to ask).
Any idea what this problem could be caused by?

I am speechless -- but happy.
The complaint about the file type only appears if you try to open a PDF stored in the phone memory but not if you try to open a PDF stored on the memory card.
Problem solved.

Unable to open AVI files in Photoshop CS6

Unable to open AVI files in Photoshop CS6
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:\Windows\system32\imaadp32.acm Unknown video codec #11" I have NO idea where to go from here. I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11". What the heck is that and what do I do about it. Any help would be appreciate, Cliff
ps I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

I am unable to open PDF files or run adobe flash when its needed I have downloaded it several times and tried updating it.

I am unable to open PDF files or run adobe flash when its needed I have downloaded it several times and tried updating it. NEED HELP

Adobe Acrobat NPAPI Plug-in, Version 11.0.04
Adobe® Acrobat® Plug-in for Web Browsers, Version 11.0.04 — from file “AdobePDFViewerNPAPI.plugin”.
application/pdf
Acrobat Portable Document Format
pdf
application/vnd.adobe.pdf
Acrobat Portable Document Format (Interim)
pdf
application/vnd.adobe.pdfxml
Acrobat XML Portable Document Format
pdfxml
application/vnd.adobe.x-mars
Acrobat XML Portable Document Format (Interim)
mars
application/vnd.adobe.xdp+xml
XML Data Package
xdp
application/vnd.adobe.xfd+xml
FormFlow99 Data File
xfd
application/vnd.adobe.xfdf
Acrobat Forms Data Format in XML
xfdf
application/vnd.fdf
Acrobat Forms Data Format
fdf
doubleTwist Web Plugin
doubleTwist Web Plugin — from file “doubleTwistWebPlugin.bundle”.
application/x-vnd-doubletwist
doubleTwist Web Plugin
Java Applet Plug-in
Displays Java applet content, or a placeholder if Java is not installed. — from file “JavaAppletPlugin.plugin”.
application/x-java-applet
Basic Java Applets
javaapplet
application/x-java-applet;deploy=10.25.2
Java applet
application/x-java-applet;javafx=2.2.25
Java applet
application/x-java-applet;jpi-version=1.7.0_25
Java applet
application/x-java-applet;version=1.1
Java applet
application/x-java-applet;version=1.1.1
Java applet
application/x-java-applet;version=1.1.2
Java applet
application/x-java-applet;version=1.1.3
Java applet
application/x-java-applet;version=1.2
Java applet
application/x-java-applet;version=1.2.1
Java applet
application/x-java-applet;version=1.2.2
Java applet
application/x-java-applet;version=1.3
Java applet
application/x-java-applet;version=1.3.1
Java applet
application/x-java-applet;version=1.4
Java applet
application/x-java-applet;version=1.4.1
Java applet
application/x-java-applet;version=1.4.2
Java applet
application/x-java-applet;version=1.5
Java applet
application/x-java-applet;version=1.6
Java applet
application/x-java-applet;version=1.7
Java applet
application/x-java-vm
Java applet
application/x-java-vm-npruntime
Java applet
QuickTime Plug-in 7.7.1
The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site. — from file “QuickTime Plugin.plugin”.
application/sdp
SDP stream descriptor
sdp
application/x-mpeg
AMC media
amc
application/x-rtsp
RTSP stream descriptor
rtsp,rts
application/x-sdp
SDP stream descriptor
sdp
audio/3gpp
3GPP media
3gp,3gpp
audio/3gpp2
3GPP2 media
3g2,3gp2
audio/aac
AAC audio
aac,adts
audio/ac3
AC3 audio
ac3
audio/aiff
AIFF audio
aiff,aif,aifc,cdda
audio/amr
AMR audio
amr
audio/basic
uLaw/AU audio
au,snd,ulw
audio/mid
MIDI
mid,midi,smf,kar
audio/midi
MIDI
mid,midi,smf,kar
audio/mp3
MP3 audio
mp3,swa
audio/mp4
MPEG-4 media
mp4
audio/mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/mpeg3
MP3 audio
mp3,swa
audio/vnd.qcelp
QUALCOMM PureVoice audio
qcp,qcp
audio/wav
WAVE audio
wav,bwf
audio/x-aac
AAC audio
aac,adts
audio/x-ac3
AC3 audio
ac3
audio/x-aiff
AIFF audio
aiff,aif,aifc,cdda
audio/x-caf
CAF audio
caf
audio/x-gsm
GSM audio
gsm
audio/x-m4a
AAC audio
m4a
audio/x-m4b
AAC audio book
m4b
audio/x-m4p
AAC audio (protected)
m4p
audio/x-midi
MIDI
mid,midi,smf,kar
audio/x-mp3
MP3 audio
mp3,swa
audio/x-mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-mpeg3
MP3 audio
mp3,swa
audio/x-wav
WAVE audio
wav,bwf
image/jp2
JPEG2000 image
jp2
image/jpeg2000
JPEG2000 image
jp2
image/jpeg2000-image
JPEG2000 image
jp2
image/pict
PICT image
pict,pic,pct
image/png
PNG image
png
image/tiff
TIFF image
tif,tiff
image/x-bmp
BMP image
bmp,dib
image/x-jpeg2000-image
JPEG2000 image
jp2
image/x-macpaint
MacPaint image
pntg,pnt,mac
image/x-pict
PICT image
pict,pic,pct
image/x-png
PNG image
png
image/x-quicktime
QuickTime image
qtif,qti
image/x-sgi
SGI image
sgi,rgb
image/x-targa
TGA image
targa,tga
image/x-tiff
TIFF image
tif,tiff
video/3gpp
3GPP media
3gp,3gpp
video/3gpp2
3GPP2 media
3g2,3gp2
video/avi
Video For Windows (AVI)
avi,vfw
video/flc
AutoDesk Animator (FLC)
flc,fli,cel
video/mp4
MPEG-4 media
mp4
video/mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/msvideo
Video For Windows (AVI)
avi,vfw
video/quicktime
QuickTime Movie
mov,qt,mqv
video/sd-video
SD video
sdv
video/x-m4v
Video (protected)
m4v
video/x-mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/x-msvideo
Video For Windows (AVI)
avi,vfw
SharePoint Browser Plug-in
Microsoft Office for Mac SharePoint Browser Plug-in — from file “SharePointBrowserPlugin.plugin”.
application/x-sharepoint
Microsoft Office for Mac SharePoint Browser Plug-in
Shockwave Flash
Shockwave Flash 11.9 r900 — from file “Flash Player.plugin”.
application/futuresplash
FutureSplash Player
spl
application/x-shockwave-flash
Shockwave Flash
swf
Silverlight Plug-In
5.1.20913.0 — from file “Silverlight.plugin”.
application/x-silverlight

Filestream Creation Unable to Open Physical File Operating System Error 259

Hey Everybody,
I have run out of options supporting a customer that is having an error when creating a database with a file stream. The error displayed is unable to open physical file operating system error 259 (No more data is available). We're using a pretty
standard creation SQL script that we aren't having issues with other customers:
-- We are going to create our data paths for the filestreams.
DECLARE @data_path nvarchar(256);
SET @data_path = (SELECT SUBSTRING(physical_name, 1, CHARINDEX(N'master.mdf', LOWER(physical_name)) - 1)
                  FROM master.sys.master_files
                  WHERE database_id = 1 AND file_id = 1);
-- At this point, we should be able to create our database.
EXECUTE ('CREATE DATABASE AllTables
ON PRIMARY
    NAME = AllTables_data
    ,FILENAME = ''' + @data_path + 'AllTables_data.mdf''
    ,SIZE = 10MB
    ,FILEGROWTH = 15%
FILEGROUP FileStreamAll CONTAINS FILESTREAM DEFAULT
    NAME = FSAllTables
    ,FILENAME = ''' + @data_path + 'AllTablesFS''
LOG ON
    NAME = AllTables_log
    ,FILENAME = ''' + @data_path + 'AllTables_log.ldf''
    ,SIZE = 5MB
    ,FILEGROWTH = 5MB
GO
We are using SQL Server 2014 Express. File streams were enabled on the installation SQL Server. The instance was created successfully and we are able to connect to the database through SSMS. The user is using an encrypted Sophos.
We have tried the following:
1. Increasing the permissions of the SQL Server server to have full access to the folders.
2. Attempted a restore of a blank database and it failed.
There doesn't seem to be any knowledge base articles on this particular error and I am not sure what else I can do to resolve this. Thanks in advance for any help!

Hi Ryan,
1)SQL Server(any version) can't be installed on encrypted drives. Please see a similar scenario in the following link
https://ask.sqlservercentral.com/questions/115761/filestream-and-encrypted-drives.html
2)I don't think there is any problem with permissions on the folder, if the user can create a database in the same folder. Am not too sure. Also see the article by
Jacob on configuring the FILESTREAM for SQL Server that describes how to configure FILESTREAM access level & creating a FILESTREAM enabled database
Hope this helps,
Thanks
Bhanu

Has anyone run into the problem of downloading or opening an E.pdf file? I am running on 10.6.8 and am unable to open the file. Any suggestions?

Has anyone run into the problem of downloading or opening an E.pdf file? I am running on 10.6.8 and am unable to open the file. Any suggestions?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

Unable to open PDF files from Fileserver Content Source using Browser

The situation is this :
A content source was created to search a fileserver
Search facility finds the files using the browser
Able to open MS Office files from the fileserver
Able to open PDF files that are in the Sharepoint Portal
Unable to open PDF files from the Fileserver
Currently using Sharepoint 2010. PDF Filter is installed and configured on the Sharepoint Server
Your assistance is always greatly appreciated.
Have a great day.
NRH

Hello Nate,
I have the necessary access to the folder.
The content source addresses are
\\172.25.136.53\KDrive\Home\Company\DAILYREP
\\172.25.136.53\KDrive\Home\Company\TRINMAR
\\172.25.136.53\KDrive\Process Safety Management
NRH

Unable to open pdf files on my IMac I have downloaded

Unable to open PDF Files on my IMac I have installed the latest Adobe Reader still no joy when I try to open any PDF File from a site I just get an empty black
page.

Is it only ones you have downloaded? What about for example the ones that came with your iMac - you didn't give a model but mine has a folder "User Guides and Information" that has a number of pdfs. Spotlight should find it for you.

Unable to open PDF files or Adobe Reader

I am unable to opern adobe reader or download a ner version of adobe reader.

Apparently the original software download was corrupt. I tried to
"change" it through the add and delete software area of Windows, and re-installed
the software. That seemed to work. Debating on whether to upgrade to one
of their other products. I could certainly use fillable forms, signature,
and modifiable documents.
Thank you for responding.
In a message dated 3/4/2014 5:34:53 P.M. Pacific Standard Time,
[email protected] writes:
Re: Unable to open PDF files or Adobe Reader
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/6179300#6179300)

Unable to open jar files in Fedora

Unable to open jar files in Fedora core 5 and getting an error messege
java -jar ezim.jar
Exception in thread "main" java.lang.ClassFormatError: org.ezim.core.Ezim (unrecognized class file version)
at java.lang.VMClassLoader.defineClass (libgcj.so.7)
at java.lang.ClassLoader.defineClass (libgcj.so.7)
at java.security.SecureClassLoader.defineClass (libgcj.so.7)
at java.net.URLClassLoader.findClass (libgcj.so.7)
at java.lang.ClassLoader.loadClass (libgcj.so.7)
at java.lang.ClassLoader.loadClass (libgcj.so.7)
at java.lang.Class.forName (libgcj.so.7)
at gnu.java.lang.MainThread.run (libgcj.so.7)
I have installed java from java.com

Any Jar file by default is associated in Windows as a Executable Jar File.When you click it the JVM tries to launch it as an standalone application But those files are not standalone applications and they don't contain Main-Class attribute in the manifest.mf file.
If you want to open jar files with a single click you will need to associate Jar files with winrar or open them directly.
It is not recommended to modify any file or their values.
Regards,
German

NW PI 7.1 Install FKD-00048 Unable to open URL file:///tmp/sapinst_instdir

Similar Messages

Maybe you are looking for