NW PI change http port

Hi,
what are the activities I need to do if we are going to change the default http port of SAP NW PI 7.1 from 50000 to port 80?
since the proxy server only allows port 80 to pass onto them in able for us to call a service from a different domain.

Hi,
Just change the parameter com.sap.aii.connect.cr.httpport in the transaction SMICM in PI

Similar Messages

How can I change HTTP port in J2EE

Hi.
I installed Sneak Preview 640 and I want to change HTTP port for J2EE. (default port is 50000)
So, I started config tools and move to dispatcher -> service -> http -> port.
There is port information.
- Custom value : empty
- Default value : (Port:80,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:http)(Port:443,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:ssl)
My first question is that default port is "80" in above confirguration. Why we use "50000" ?
Second question is that I changed custom value but It doesn't work. How can I change HTTP port ?
Regards, Arnold.

you can use the "visual administrator" to set your http-port, too:
Dispatcher / Services / HTTP Provider / Ports
kr, achim

Cannot change http port

Hi guys,
I am trying to change the http port permanently to port 8000. Therefore I go to RZ10 -> select SID_DVEBMGS00_XXXXX -> Extended maintenance -> Display -> Edit -> Create -> and I add
Parameter name:
icm/server_port_0
Parameter val:
PROT=HTTP, PORT=8000
Then I press twice Copy and activate the profile. After that I restart the system.
Now when I go back to RZ10 -> select SID_DVEBMGS00_XXXXX I can not see the icm/server_port_0 entry in the parameter list. It should be here right?
Also when I go to transaction SMICM -> GOTO -> Services the HTTP Protocol is 0 and not 8000.
What am I doing wrong?
Thanks
Goluef

Hi Mate,
Before doing edit I would rather request you to import the active profiles first as changes done in older one will certainly not reflect.
Utilities >> Import Profiles >> Of active servers
Then choose the instance profile..Check if already there any entry of icm/server_port_0 and if not then create it or add a new one as icm/server_port_1 or similar
Then Copy the change>> Save>> Activate or Save and Activate.
Restart the system and the change should be there for sure..
If still doesn't work - Check the permissions in filesystem of this profiles and if the SIDadm is able to write the files. The data won't get written until you save it. Might want to check SM21 for errors.
Alternately for the time being just goto SMICM >> Goto >> Services >> Change the HTTP service here
Services >> Change
Put - Port - 8000, Log (HTTP), Keep alive, Process time and Save it.
Do note this is temporary and restarting system/ICM will make it go.
Do mind the port 8000 should not be used by any other process/prog.
Cheers,

Scripted WAS Config change http port add JVM classpath

On Windows in WAS 6.4 SP9
I can manually change the HTTP port for the dispatcher and add JVM settings (system properties and classpath) on the J2EE engine in the ConfigTool but I need to create an automated script do what I am manually doing in the ConfigTool.
Can someone please provide an example of how to do each or any of these? Is there documentation on how to script things manually done in the ConfigTool?
Thanks,
Barry

Hi,
changing the HTTP port is possible by integrating the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/84/0e3f15fc6af94f82c2e6449bcef3d1/frameset.htm">SETSP</a> shell command into your script (just as suggested in your other post).
However, I'm unsure about the JVM settings. They are usually read from a property file (instance.properties) by the jcontrol process that starts the instance. The option I see is to integrate the jcontrol in your script and pass your custom properties file using its -file option. However, this is just a suggestion - I have never tried this and am therefore not sure if it works at all.
No documentation is available about scripting, as AFAIK, this is not an officially supported startup procedure.
Hope all that helps a bit!

Change http port for Adobe Connect Pro?

I'm running Adobe Connect Pro 7.5 and would like to change the HTTP port Adobe Connect Pro uses. I've changed this from 80 to 90 in the Adobe Connect Pro console and saved. Then restarted my Adobe Connect Pro application. When I go to the URL http:\\<servername>:90 I get a "Connot Connect to Webpage" error. If I change it back to 80 the URL http:\\<servername>:80 works.
Does anyone know how I can change the port for Adobe Connect Pro 7.5? Is there another step I need to do on my Windows 2003 server?

I've had to "cache" uploaded videos by playing them shortly before the audience will see them. For me, the cache holding time when using Adobe's servers is about 5 minutes.

Changing the HTTP port number

Hi
I want to change the HTTP port number of the SAP web AS .Any idea on this how can i do that ?
regards
rajesh

Hi Rajesh ,
just go throgh this link , u can change this using Visual Administrator
http://help.sap.com/saphelp_nw04/helpdata/en/5b/82d3c3ee9691418e6b0281f933a37d/frameset.htm
Regards
Kishor Gopinathan

ECC6 integrated ITS default port 8000 changed to http port 80

We want the ECC6 integrated ITS default port 8000 changed to http port 80. The integrated ITS Cat2 transaction is currently working on http port 8000. I changed the icm/server_port_0(Instance Profile) and the ICM Monitor Active Services(smicm services) to use port 80. Cat2 transaction fails http fails after system restart. I have reverted back to 8000 and all is now working again. Is there more work that needs to be carried out or is port 80 is supported?

is your application server in domain?
if its in domain and when used sapides.<xxxx>.com if you get DNS not found, may be browser is looking up internet, put your domain in the exception in tools->internet options->connection->lan settings->proxy->advanced
"This server does not support HTTPS! It is therefore potentially unsafe to send your password" i just a warning message and you should still be able to log on.
(if you want to hide this info let me know)
and i never could logon into R/3 !!
do you also see a message that SSO2 is not configured? if yes follow the steps explained in OSS note no.517860
when you say never could logon what happens,
a) the field for user id pwd disabled? - click on the basic authentication button to get the log on pop up
b) error messages?
Regards
Raja

Multiple Context - Changing http server port

Hi,
Is it possible to change the firewall https port to different port? Normally in single context mode you can change it with this command.
http server enable 4434
In multiple context mode there is no option for the port...
http server enable ?

hi marius,
i just tried this on our live ASA 5520 and you're right, it can't be done on admin context.
it also can't assign a diffrent port under a different context. only default 443 is accepted.
ciscoasa/admin(config)# ip http serve enable ?
ERROR: % Unrecognized command
ciscoasa/CONTEXT(config)# sh ve
Cisco Adaptive Security Appliance Software Version 8.3(2)
Device Manager Version 6.3(5)
ciscoasa/CONTEXT(config)# http server enable ?
configure mode commands/options:

How to change HTTPS Console and Weblogic admin port

Hi,
I want to change my HTTPS Console port which was default port 7799 to some other port and also weblogic admin port 7101 to some other port .
How can we change that. Thanks
Thanks,
Sachin Bhadauria

you will need to change the monitoring credentials for the EMGC_GCDomain to reflect the new Admin Server port.
Go to Targets->Middleware->EMGC_Domain
Select Target Setup->Monitoring Credentials from the Farm dropdown menu
Change the Port field
Go back to the Farm dropdown menu and select Refresh WebLogic Domain->Add Update Targets
The OHS and Admin Server targets should now show UP in the console. I have verified this on my test site.

HTTPS port change

Hi;
Can I change management https port on WLC?
I couldn't see on the GUI maybe from CLI I can change it.
I use 6.0.196

Hi Murat,
no you cannot. Sorry :-)
Nicolas
===
Please rate answers that you find useful.

OC4J http port in release 2

i am deploying an oc4j application on release 2. but am not sure what is the oc4j http port from where i can access the web-site of the application deployed. also, what all configurations need to be done to make this work. in release 1, the server.xml, default-web-site.xml and data-sources.xml had to be edited. is it the same here or any other xml files need to be changed?

By default OC4J 9.0.2/9.0.3 is configured to listen for http requests at port 8888. Please look at http-web-site.xml.
regards
Debu

SERVER.XML re-write problem when changing HTTP to HTTPS

Hello,
I am using SUN ONE App server and had a problem with turning SSL on in order to use HTTPS.
What I did was that in GUI I selected a http listener under my instance and checked SSL/TLS Settings. I clicked Apply Changes button and I got a message saying that there wa a problem with XML-DOM. I checked my server.xml and found that its size was 0. It seems that it stopped re-writing it when it met the problem.
An interesting thing is that when I created an additional http listener with SSL at a different port, there was no problem.
It seems that the problem occurs only when I tried to change HTTP to HTTPS.
Is there anyone who can tell me why this happens?
I will appreciate any answers or comments.
Thanks

Hi,
Is your Implementation Class is still the same (as the old one), when you changed the pre-fix.
Just double click on the Implementation class and check whether the methods are still implemented or not.
Thanks, Advay

How to change default ports for task flow application?

I deploy a task form with the following hwtaskflow.xml information:
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>false</TaskFlowDeploy>
<TaskFlowServer>
*<hostName/>*
*<httpPort/>*
*<httpsPort/>*
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>ApproverHumanTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/MyApp/MyComposite/MyTask</TaskDefinitionNamespace>
<TaskFlowId>MyTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/MyTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
When I deploy the form then check the task URI in EM I see
Host name: server host name
HTTP port: 80
HTTPS port: 443
I know I can override these ports in the hwtaskflow but what if I want HTTPS port left blank? We don't have HTTPS active on our server. Another server in our environment only populates the HTTP port (HTTPS port is left blank) but I'm puzzled why the different behavior.
Can anyone tell me either how to specify a "blank" HTTPS port in the hwtaskflow or, preferably, how to change the server configuration so that HTTPS port is not filled in when I deploy the task form? We are wanting a completely automated deployment and presently we have to manually remove the HTTPS port via EM after deploying. Argh!

Jon,
May be you already figured out the solution nevertheless i will answer your questions.
1. Turning off the https port - give value as 0 for httpsPort in your hwtaskflow.xml.
Second reason why your custom hwtaskflow is not getting picked up is you have set the TaskFlowDeploy as false.
If you set this as true , and specify your cluster address you should be all set.
for eg : - your cluster host address is somename.cluster.com with only http configured at port 80 lets assume.
Then your hwtaskflow should look like this
<?xml version = '1.0' encoding = 'UTF-8'?>
<hwTaskFlows xmlns="http://xmlns.oracle.com/bpel/workflow/hwTaskFlowProperties">
<ApplicationName>worklist</ApplicationName>
<LookupType>LOCAL</LookupType>
<TaskFlowDeploy>true</TaskFlowDeploy>
<TaskFlowServer>
<hostName>somename.cluster.com</hostName>
<httpPort>80</httpPort>
<httpsPort>0</httpsPort>
</TaskFlowServer>
<hwTaskFlow>
<WorkflowName>LeaveRequestTask</WorkflowName>
<TaskDefinitionNamespace>http://xmlns.oracle.com/BuildApplication/BuildProject/LeaveRequestTask</TaskDefinitionNamespace>
<TaskFlowId>LeaveRequestTask_TaskFlow</TaskFlowId>
<TaskFlowFileName>WEB-INF/LeaveRequestTask_TaskFlow.xml</TaskFlowFileName>
</hwTaskFlow>
</hwTaskFlows>
This will automatically pick up the values on deployment , other play you can configure this is in your em console as well.

How to change default port in iws 4.1 installed in Solaris 5.9

Hi All,
I had installed iws 4.1 in solaris 5.9
Now , I want to change my default https port from 443 to 445 .
Can anybody , Please let me know the proceudre how to do it ?
Thanks for help in advance.
Regards
James

Ya , Manish you are right IWS 4.1 is really old.
But My application has been developed in past that is using IWS4.1 .
Right now , we are not having budget to migrate it from IWS4.1 to IWS6.1.
And the pointer for changing the port from magnus.conf is also correct but
I need to make it default port.
That means If would not specify any port number out of two port request goes to default one.
Right now default port is 443
But I want it to be 445
Thanks
James
Message was edited by:
write2jamesbond

How to change the port no in weblogic 10.3 server.

Hi,
Could you please tell me the steps,how to change my bea10.3 port no from 7001 to 7002?
Thanks Advance.

Hi,
Please refer to : http://weblogic-wonders.com/weblogic/2010/02/25/changing-adminserver-port-using-jmx/ (Using JMX)
http://forums.oracle.com/forums/thread.jspa?threadID=1037611&tstart=0 (Using WLST)
Simplest option ...your can change it from AdminConsole as well.....
Login to AdminConsole--->Server--><YourServer_name>--->Cionfiguration(Tab)--->ListenPort (Change it)
Thanks
Jay SenSharma

NW PI change http port

Similar Messages

Maybe you are looking for