NW PI Post Installation steps
Hello All,
I have installed a dual stack PI system and performing post installation steps for PI AS Java. In configuration tasks After completing NetWeaver initial setup with skipped steps I was progressing to next step to configure NW PI - AS ABAP in All Configuration Tasks-->NW PI - AS ABAP (Basic Configuration for Idoc, Proxy Maintain) but I couldn't find this option.
I have updated system, patches, cim etc still I couldnt find the above option, Please advise where I went wrong.
Thanks
Sam
Hi,
What is the pi version?
The steps differs from version to version . Like 7.1 and 7.3 are not exactly same. Can you check in the installation guide for the pi specific post steps for your version .
Regards,
Amit.
Similar Messages
-
Error in the post installation steps of SLD .
Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
NareshHi Naresh,
Can you let me know the service pack for the portal.
Also try login in using administrator using the http://<localhost><port>/sld
thanks
Pankaj -
Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO
Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
HolgerHi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos -
Webdynpro error in Post installation steps of SLD
Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
<b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!</b>
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
NareshHey Aviad,
Yes I did, in my case I've installed PDK SP 9 over SP2 which is prohibited. If this is your case as well do the following:
1) From the Undeployment tab of the SDM select the com.sap.pct.pdk..
components.
2) Using the Archive remover tool which can be accessed from
System Administration > Support > Portal Runtime > Administration
Console > Archive Remover --> Remove the portal applications with prefixcom.sap.pct.pdk...
3) Navigate to Content Administration > Portal content > Content
Provided by SAP > Platform Add-Ons > Developer Content
and remove all the contents below this folder.
4) Restart the server
After this you can deploy the SP9 business package using the SDM.
Hope it helps,
Roy -
POST Installation steps for SAP XI 7.0 SP06
Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly helpHi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful) -
Post installation Steps for SAP XI
Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
NishantCreate user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer -
Hi,
I'm trying to get XI going at a project. The basis guys have installed the server but I have an idea none of the 'post installation steps' have been completed.
The symptoms are that when I start the Integration Builder (SXMB_IFR) the Windows 'File Explorer' is started and not IE. The Integration Web page is not displayed.
I quickly looked at the Configuration guide and I see none of the RFC destinations mentioned in the guide.
Is this the reason for the problem ?. I need to know exactly what totell the basis people to look at. They have never done an XI installation before so I'm almost sure they have not done these configuration steps.
Thanks
AndreHi Andre,
They should look at the intallation/configuration guides that SAP provides. These guides can be found at the service.sap.com and/or help.sap.com
In a nutshell you have to make sure they have configured:
SLD settings, these involves configuring RFC destinations, Maintain the SLD parameters in SLDAPICUST.
Register, Starting up the queues. Configure the role of the integration server in trx SXMB_ADM or SXMB_ADMIN.
Hope this helps.
Cheers,
Roberto
Message was edited by: Roberto Viana -
Post Installation Steps for ERP add-on Inventory Manager 4.0
Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju VenkateshaYeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan -
EP 7.4 specific post installation steps
Hi,
Installing EP on NW7.4 SR1 .
After the installation, are there any EP 7,4 specific post steps need to be carried out?
Any template installer needs to be ran?
I will appreciate your help and guidance
Thanks in advanceHello Daniel,
Please check post installation steps at 82 page https://websmp203.sap-ag.de/~sapidb/011000358700000881042012E/nw740_win_db6_java.pdf
BR,
K. -
Post installation steps for EP 7.0
Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
SubbuHi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu -
Oracle Enterprise Repository post installation steps failed.
Hi,
I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
what could i have done wrong or suggest me hints to locate the error.
2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
Traceback (innermost last):
(no code object) at line 0
SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
at org.python.core.parser.fixParseError(Unknown Source)
at org.python.core.parser.parse(Unknown Source)
at org.python.core.Py.compile_flags(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
Thanks
Edited by: 985275 on Jan 31, 2013 12:13 AMHi,
After installing Oracle DB, did you Install RCU setup succesfully??
If not, Install RCU and then procced.
-Santosh -
Post Installation steps for Messages archiving from Adapter engine
Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar BolisettyHi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime -
Post installation steps for PI 7.0
Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~KumarHello,
<br><br><br>
We did PI Installation recently and version is 7.1
<br><br><br>
Steps are as under...
<br><br><br>
<br>1. Basic PI installation</br>
<br><br>2. System checks after basic installation
<br>a. SM50
<br>b. SM21
<br>c. ST22
<br>d. SM12
<br>e. SM13
<br>f. SM37
<br><br>3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
<br><br>4. Change 001 client settings back to no changes allowed.
<br><br>5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
<br><br>6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
<br><br>7. Import profiles (RZ10)
<br><br>8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
<br>a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
<br>b. icm/host_name_full = hostname.domain.ext
<br>c. login/system_client = 100
<br>d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
<br><br>9. Configure TMS in transport domain controller{PI DEV} (STMS)
<br>a. Add virtual system
<br>b. STMS in newly installed system and configure proper transport domain
<br>c. In domain controller approve the new system (STMS -> SAP system -> Approve)
<br><br>10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
<br><br>11. Kernel Update JSPM
<br>a. JSPM update
<br>b. Kernel update
<br>c. BC-FES-IGS update
<br><br>12. Support pack installation ABAP
<br>a. SPAM update
<br>b. Support packs update
<br><br>13. Support pack installation JAVA
<br>a. Apply support pack stack
<br>b. Apply support pack patches
<br>i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
<br>c. Restart JSPM and continue patch installation
<br><br>14. Client copy from client 001 to X00 using profile SAP_ALL
<br><br>15. Create logical system and assign it to new client (SALE)
<br><br>16. Change UME target in JAVA to client X00.
<br>a. Enter URL as http://hostname.domain.ext:port/nwa
<br>b. Management -> Infrastructure -> Destination
<br>c. Logon data TAB change client to X00
<br>d. Restart JAVA Instance
<br><br>17. Create following users
<br>a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
<br>b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
<br>c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
<br>d. JCoRFC_<SID> in new system
<br>e. Sapadm user in new system
<br><br>18. Assign roles and groups to BASIS team on JAVA Stack
<br><br>19. Create PUBLIC logon group (SMLG)
<br><br>20. Configure SLD collector job as sapadm (RZ70)
<br><br>21. Run Configuration Wizard
<br>a. Enter URL as http://hostname.domain.ext:port/nwa
<br>b. Configuration management -> Scenarios -> Configuration Wizard
<br>c. Select Initial Configuration and click Start.
<br><br>22. Create the JCoRFC connection.
<br>a. Enter URL as http://hostname.domain.ext:port
<br>b. Web Dynpro -> Content administrator -> Maintain JCo destination
<br>c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
<br>i. WD_ALV_METADATA_DEST
<br>ii. WD_ALV_MODELDATA_DEST
<br>iii. WD_MODELDATA_DEST
<br>iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
<br><br>23. Repeat for the remaining 3 JCo RFC destinations.
<br><br>24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
<br><br>25. Create RFC destination in to ERP target system (SM59)
<br>a. Give Name PI_INTEGRATIONSERVER
<br>b. Connection type H
<br>c. In Technical settings TAB provide
<br>i. Target host = hostname.domain.ext
<br>ii. Path Prefix = /sap/xi/engine/?type=entry
<br>iii. User information is blank
<br><br>26. Setting SXMB_ADM ERP target system
<br>a. Open Integration engine configuration
<br>b. Goto -> Change Global Configuration Data
<br>c. Role of Business system = Application System {This is optional}
<br>d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
<br><br>27. Schedule Standard Jobs as SAPADM in client X00.
<br><br>28. SICF service to activate
<br>a. /default_host/sap/public/bc/pictograms
<br>b. /default_host/sap/public/bc/webicons
<br>c. /default_host/sap/public/bc/its/designs
<br>d. /default_host/sap/public/bc/workflow
<br>e. /default_host/sap/bc/ccms
<br>f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
<br>g. /default_host/sap/bc/webflow
<br>h. /default_host/sap/bc/workflow
<br>i. /default_host/sap/bc/workflow_xml
<br>j. /default_host/sap/bc/xmb
<br>k. /default_host/sap/bc/ping
<br>l. /default_host/sap/xi/wsdl_sr
<br>m. /default_host/sap/xi/wsdl_url
<br>n. /sap/bc/webdynpro/sap/appl_soap_management
<br><br>29. Adjusting JNLP Heap size
<br>a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
<br>b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
<br>c. Value = 1024
<br>d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
<br><br>30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
<br>a. RFC Destination = AAE_<SID>
<br>b. Connection type = G
<br>c. Target Host = Host Name of AAE Server {PI Server}
<br>d. Service No. u2013 HTTP port number of AAE Server
<br>e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
<br>f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
<br><br>31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
<br><br>32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
<br><br><br>
Please let me know if I am missing anything there...
<br><br><br>
Cheers,
<br>
Yogesh -
Post Installation steps for Solution Manager 4.0 SP10
Hi,
Can any one of you help me out to do the post installation steps to be done after installing solution manager.
Thanks in advance.
Thanks
VenuHi Dolores,
I am not able to find iTutor anywhere in service.sap.com/rkt-solman.
Could you please give us the perfect path for that?
Regards
Pranav -
Post Installation Steps after installation of sap sol 7.1
Dear all
Can you pls share me what are the post installation steps required after the installation of Solution Manager 7.1
I know some of them as same in ECC
1 ) SICK
2) STMS
3) RZ10 - Profile parmeters
4) SGen
5) Back ground Jobs scheduling
Also tell me which parameters need to be set in solman
regards
ShakshiHi,
You can refer below guide for setup:
https://websmp103.sap-ag.de/~sapidb/011000358700000872072011E
Regards
Vivek
Maybe you are looking for
-
ITunes unknown error (-1200) HughesNet Gen4 solved
In iTunes, when trying to review my purchases from the iTunes store, I received the following error: "We could not complete your iTunes request. An unknown error occurred (-1200)". This happened both on my MacBook Pro and my iMac while I was at home
-
Get Next or Previous Primary Key Value
I have a dynamic report with a select statement retreiving certain number of records, depending on the user choice. Once the user decides to change a record, he clicks on it and gets forwarded to the form page. On the form page I have two buttons - p
-
Kwin_gles on nvidia 337.12
Just wanted to share my experience trying out kwin_gles on nvidia 337.12. So far it is working well with no crashes. The blur effect was causing artifacts, but after turning it off I haven't had any other problems. OpenGL vendor string: NVIDIA Corp
-
How to re-synch primary and standby database?
Hello everyone, Working on 10g R2/windows server 2003, I have configured a physical standby database but, I have an issue, and don't know how to resolve it. We were making an update that made some DDL and DML on our application, and for security reas
-
Administration Edition- View Business Areas
Can anyone tell me if it is possible to install the Oracle discoverer Administration edition for a user, but only with query/view rights on Business Areas ?. The user should not be able do make changes , but only to view : eg : folder links, custom f