NW portal for development purpose to install locall computer

Hi
Is there development purpose portal installation to Win XP computer?
I want to use it for development purpose.
Thanks.

Hi,
check out this section with all their different download and subscription models
http://www.sdn.sap.com/irj/scn/downloads

Similar Messages

Installation of SOA Suite 11g for development purpose

Hello All,
I wanted to install SOA Suite 11g for development purpose on my laptop (OS Windows XP).
As per installtion prerequisite process in the download page of oracle.
I found the following pre requisite - installation of Oracle DB 11g EE(although i am having Oracle DB 10g R2 10.0.2.0 - now the problem is i am not able to run RCU in this data base, so i installed 11g)
Jdev 11g Download
Web Logic Server
RCU Utlilty run
then SOA Suite installation.
My doubt is , is there any SOA development installation available because 11g DB EE takes lot of space in my system.
if available please provide the link.
Thanks & regards
Aboothahir

Hello Anuj,
Thanks for your reply,
I am running RCU utility on the XE Database.
I am getting the following error:
RCU-6083:Failed - Check prerequisites requirement for selected component:OIM
Please refer to RCU log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Error: JVM is not installed on the Database.
RCU-6092:Component Selection validation failed. Please refer to log at C:\rcuHome\rcu\log\logdir.2011-02-07_21-34\rcu.log for details.
Please provide a solution for this.
Thanks & Regards
Aboothahir M

Is Standard Edition free for development purpose

Hello,
I am using Oracle 10g express edition on a 32-bit Redhat Enterprise Linux 4. My test database have come upto 2gb and after that the database stopped working. I have been told to change to 64-bit OS through forums because of the 2gb file size limitation for 32-bit OS. When I checked the Oracle downoad site, there is no 32-bit Oracle express edition 10g. There is a 64-bit Oracle standard edition. Is Oracle 10g Standard Edition free for development purposes? What about Oracle 11g Standard edition?
Edited by: Thunder44 on Aug 25, 2008 1:09 PM

All Oracle software, though, is available for download from OTN with a license that allows you to prototype your application. Once the application is beyond the prototype phase, you'd need to purchase an appropriate license for your development environment, but you may just be looking at prototyping...
As well, note that the database size and RAM restrictions in the express edition would not be expected to change if Oracle ever released a 64-bit version. The whole point of those restrictions is to ensure that the free express edition doesn't cannibalize sales of the standard edition databases.
Justin

Is it possible to install Sharepoint Foundation 2013 in a Windows 8 Pro box for development purposes?

I remember an article explaining how to install SharePoint Foundation 2010 in a Windows 7 box which was prone to some errors but however a great article (http://blogsp.idea80.com/2010/02/instalacion-de-sharepoint-2010-sobre.html).
I wander if it would be posible to install 2013 in a Windows 8 pro box.
I want to try the SharePoint features in Visual Studio but I dont really want to go through the whole installation process for SharePoint in a server. I am not interested in ADS integration or anything else, just basic functionality to develop some basic
add ons in Silverlight.
Any help would be greately appreciated.
thanks!

No, it's not possible to do that anymore, it has to be run on Windows Server 2008 R2 or 2012, and I would totally recommend the latter, it seems to perform much better. But what you can do is this, and its what I'm doing, run a virtual machine on Windows
8 running Windows Server 2012 and install SharePoint 2013 there. Works like a charm.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Best practice for having separate clone data for development purposes?

Hi
I am on a hosted Apex environment
I have a workspace containing two instances/ copies of the application: DEV and PROD
I would like to be able to develop functionality and data in/ with the DEV instance and then insert it into DEV.
I gather that I can insert pages from DEV to PROD via Create -> New page as copy -> Page in another application
But I don't know how I can mimic this process with database objects, eg. if I want to create a new table or manipulate the data in an existing table in a DEV environment before implementing in a PROD environment.
Ideally this would be done in such a way that minimises changing table names etc when elevating pages from DEV to PROD.
Would it be possible to create a clone schema that could contain the same tables (with the same names) as PROD?
Any tips, best practices appreciated :)
Thanks

Hi,
ideally you should have a little more separation between your dev and prod environments. At the minimum you should have separate workspaces each addressing separate schemas. Apex can be a little difficult if you want to move individual Apex application objects, such as pages, between applications (a much requested improvement), but this can be overcome by exporting and importing the whole application. You should also have some form of version control/backup of export files.
As far as database objects go, tables etc, if you have tns access to your hosted environment, then you can use SQL Developer to develop, maintain and synchronize between your development and production schemas and objects in the different environments should have identical names. If you don't have that access, then you can use the Apex SQL Workshop features, but these are a little more cumbersome than a tool like SQL Developer. Once again, scripts for creating and upgrading your database schemas should be kept under some sort of version control.
All of this is supposing your hosting solution allows more than one workspace and schema, if not you may have to incur the cost of a second environment. One other option would be to do your development locally in an instance of Oracle XE, ensuring you don't have any version conflicts between the different database object features and the Apex version.
I hope this helps.
Regards
Andre

Use a remote iPad for development purposes?

I want to allow my partner's iPad to test my apps. No problem, of course if the iPad is within connecting distance to XCode. However, the iPad is at a remote location, and my partner doesn't use a Mac.
How can I authorise the device and transfer my apps to it for testing?

It's on
https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistrib utionGuide/TestingYouriOSApp/TestingYouriOSApp.html

Blackberry Media Manager NOT working for Blackberry storm (wont install on computer)

Hello 2months ago I got a Blackberry storm. Its a good phone but I have one problem that would make it much better. When I try installing the desktop manager, everything installs besides the Roxio Media manager. It gives me an error and cancels the installation of Roxio and continues with the other stuff. I really want to transfer Photos and Videos from my phone to my computer and vice-versa. Please tell me what I can do to install the Media Manager to get the device working. I am not using the CD's to install, i downloaded it from the blackberry website. The english version WITH media manager, and I even clicked Custom install and made sure it was planning to install it.
My error is this:
Error 1402.Could not find key:
UNKNOWN/ComCtl3.CoolBar/CLSID
Verify you have sufficient access to the key , or contact your support personelle.
What does that mean I have to do?
Solved!
Go to Solution.

Hi and Welcome to the Forums!
You don't need Roxio nor Media Manager to transfer files to/from your BB. Follow these instructions and be sure to download the version of Desktop Manager that is without either of those...
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
With that, you'll be able to have 2 additional drive letters on your Windows PC and you can drag-and-drop just like any other drive on your machine. Slick.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Install Weblogic 12c zip for developement on Windows 7

I have downloaded wls1211_dev.zip for development purpose (instead of full install using windows installer), for installing on the windows 7 (64 bit). After extracting the zip contents, I set up the environment variables for JAVA_HOME, MW_HOME and JAVA_VENDOR as stated in the readme.txt included in the zip distribution. I also made sure to set the environment variables using 8.3 names (old DOS names) by using dir /x command. Here are the environmental settings:
E:\WLS12c>echo %JAVA_HOME%
C:\PROGRA~1\Java\JDK17~1.0_0\bin
E:\WLS12c>echo %MW_HOME%
E:\WLS12c
E:\WLS12c>echo %JAVA_VENDOR%
Sun
But every time I run configure.cmd, I get the following error:
(I checked the permissions on the directory where I have unzipped and it is full control for me (not an administrator user). I tried to run the configure.cmd using administrative user but the same result). I can also navigate to the directories using 8.3 names. I am able to create delete and update files and folder in the target directories as non-administrative user. I have no idea why I should be getting the following errors.
WebLogic Server 12c (12.1.1.0) Zip Configuration
MW_HOME: E:\WLS12c
JAVA_HOME: C:\PROGRA~1\Java\JDK17~1.0_0\bin
783 jar files are being unpacked.
Please wait, title bar will show progress ...
The system cannot find the path specified.
-- above line repeated I guess 783 times
"ACLs are being setup for E:\WLS12c Please wait..."
The system cannot find the path specified.
The WebLogic Server wasn't found in directory E:\WLS12c\wlserver\server.
Please edit the setWLSEnv.cmd script so that the WL_HOME
variable points to the WebLogic installation directory.
Your environment has not been set.
The system cannot find the path specified.
I will appreciate your help in this regard.
Thanks in advance
Salman

Hi,
This issue usually occurs when you install WebLogic Server using generic jar installer and when launching installation with incorrect JDK version.It may be improper JDK installation or incorrect JAVA HOME setup at OS level.
To resolve this issue, uninstall current WebLogic installation using generic.jar installer that is referring incorrect JDK and relaunch the installation with correct JDK by setting correct JAVA HOME system variables. Below are steps to be followed to address this issue.
Un-install WebLogic from your machine.
If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
Run the installer as follows:
Open a command prompt
Change directory to \JDK_64\bin folder and execute:
java.exe -jar -Xms1024m server1001_generic.jar
After the installation is completed you can proceed to safely run the Configuration Wizard (config.cmd)
Regards,
Kal

Need help : Installing the standalone OEPE for OSB 11g for development

Hi All,
It would be greatly appreciated if any one could share the details of installing the standalone OEPE (Eclipse along with the OSB plugin for 11g) for development purpose.
If possible kindly share the download link for the same.
Thanks in advance.
Regards,
Balaji R

Hi,
To have OEPE with the plugins for OSB you actually have to install Weblogic with OEPE and OSB. OEPE will need the libraries in Weblogic and OSB installation...
The latest version for Weblogic+OEPE (Indigo) for Windows
http://download.oracle.com/otn/nt/middleware/11g/wls/1211/oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32.exe
The latest version for OSB for Windows
http://download.oracle.com/otn/nt/middleware/11g/111160/ofm_osb_generic_11.1.1.6.0_disk1_1of1.zip
Weblogic download page...
http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
OSB download page...
http://www.oracle.com/technetwork/middleware/service-bus/downloads/index.html
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Would it be possible to have 2 shared resources, one local containing all common topics and pictures for several projects, and another one remote containing all topics and pictures for collaboration purposes

Hi,
I was wondering, now that I discovered the advantages of Resource Manger, if it would be possible to have 2 shared resources, one local with common topics and pictures for several projects, and another one, remote, containing the whole projects, i.e. topics and pictures, for collaboration purposes.
The local one I intend to use it for my purposes to have common items (topics & pictures) updated in all projects where they appear, and the remote one I intend to use it together with my remote colleagues that might want to do changes in the topics.
This would mean that the common topics and pictures would be present in both resources, the local one as well as the remote one.
Thank you.

Thank you for your fast answer Rick.
I was merely wondering if it would be possible w/o having to use other products outside RoboHelp.
We are already using svn for a lot of other purposes and we are using that for the RoboHelp projects as well, however I was wondering if it would not be possible to have RoboHelp take care of the RoboHelp projects, and with svn to take care of the other things in the company.
Eventually, if it would be possible, I would think to sync all the local projects with the remote projects, then sync the local project with the local shared resources, and at the end sync the rest of the projects with the local shared resources.

Do I need a separate iPhone for development?

Hello fellow developers,
I'm excited that I'm finally accepted to the dev program so I can test my app on my iPhone. Before I start testing, I have a couple of questions though. Do I need a dedicated iPhone device for the development? or is it possible to use my only iPhone for both development and personal use?
Another question is, I've read that I need to install an iPhone OS on my device. Given that I have updated my iPhone today with the latest official 2.0 firmware, do I still need to install another binary for the development?
Cheers,
Jake

1) I use my iPhone both for development and personal use. The last few beta updates have been pretty stable so personal use is possible and is not as annoying as it used to be. However, you should expect some performance issues (mostly due to extensive logging and probable debug builds) and unexpected crashes since the releases were still beta (point 2 might affect this).
2) I haven't been able to update my iPhone to the latest gold master v2.0 of the iPhone firmware yet. Since I already have v2.0 beta 8 installed, iTunes doesn't seem to be able to distinguish between the two versions. According to the information available on the development portals, we should be able to use the GM firmware for development purposes, which imho would be awesome!
HTH

Correct Hardware Requirment for Educational Purpose

Goal:
Buy a new hardware for SharePoint development.
Purpose:
Increase my knowledgein SharePoint development. Today. I'm a junior SharePoint developer. I have experience in dot.net deveopment but not in SharePoint development.
Problem:
1.
Is Hardware requirements—database requirement below enough?
2.
Which software requirements I should use?
- Single server with built-in database,
- Server farm with a single server in the farm or
- Server farm with multiple servers in the farm
for a educational purpose. Each of these has different hardware requirement. (http://technet.microsoft.com/en-us/library/cc262485.aspx)
Information:
I have consider buying a new desktop och laptop computer with following criteria.
laptop with hardware requirement:
16 GB RAM
Intel processor i7
Desktop with hardware:
24 GB RAM
Intel processor i7
I gonna install windows 2012, SQL server 2012, SharePoint 2013 in VM Player's environment.

For development purposes, if you leave out SharePoint Search, you can get away with as little as 10GB RAM allocated to the SharePoint + SQL VM (given you restrict SQL to 1 or 2GB memory).
If you need Search functional, then go no lower than 16GB for a SharePoint + SQL VM.
Also make sure you get a separate disk for the SharePoint + SQL VM, SSD if you can swing it, otherwise, in a laptop, a 7200 RPM drive minimum.
Don't forget that you also need a Domain Controller in your environment running Active Directory. This should not be the same VM as the SharePoint server, but rather a separate VM (for many reasons). This VM can be small, with as little as 512MB RAM allocated
to it.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Setting 1280x1024 Screen size in Jdeveloper 11.1.1.4 for development

Hi All,
I am using JDeveloper 11.1.1.4 to develop an ADF application. I want to develop UI screens for lowest screen resolution as (1280x1024). But in the JDeveloper IDE in the resolution dropdown, I can only see the following
Full screen
400x600
600x800
800x1200
1024x768
1280x720
1600x1200
1680x1050
Problem is most of the end-user (customers) screens have maximum resolution of 1280x1024. My development PC resolution is 1600x1200. Can I can use the full screen option in JDeveloper after setting my screen resolution to 1280x1024? Will it suffice or is there a way to set JDeveloper for 1280x1024 resolution in the IDE for development purpose.
Thanks
Edited by: user5108636 on Feb 13, 2011 10:11 PM

I previously developed under full screen option and my PC resolution was 1600x1200. But when the application was ran on other screens it was displaying with some page contents being cut out. It was due to other machines running on lower resoultion. I will need now redesign the pages to run on user defined lower resolution of 1280x1024. How do I setup Jdeveloper design tab to show for 1280x1024.
Thanks
Edited by: user5108636 on Feb 14, 2011 5:23 PM

Is Oracle Apex a freeware tool for development?

Dear All,
Is Oracle ApEx a freeware tool for development purpose?
As per my knowledge as All Oracle products are free for Development purposes. Licenses are required only for professional usage.
i.e for Customers who use Applications developed in Oracle Products.
So I think Oracle ApEx is also a freeware Development tool.
Is that right?
regards,

Abhijit,
Is Oracle ApEx a freeware tool for development purpose?
Oracle Application Express can be used in conjunction with a compatible Oracle Database Server product for which you hold a license.
As per my knowledge as All Oracle products are free for Development purposes. Licenses are required only for professional usage. i.e for Customers who use Applications developed in Oracle Products.
I don't believe that any aspect of what you stated is correct.
Oracle product downloads from OTN are free, i.e., there is no charge for downloading, and the use of the downloaded products are restricted by the license agreement that can be found here: http://www.oracle.com/technology/software/htdocs/devlic.html
So I think Oracle ApEx is also a freeware Development tool. Is that right?
Doesn't sound right to me, no, but "freeware Development tool" is your own terminology. Please refer to the actual license agreement for any Oracle product that you have questions about or contact your Oracle sales representative for further clarification.
Scott

Trouble updating Firmware for OS X Tiger install

Hi,
I'm having trouble installing OS X Tiger. I currently have OS 10.2.8 installed and get a message that I need to update my firmware in order to install Tiger, but the only firmware update I can find is for OS 9. Is there any way to accomplish this without having to reinstall OS 9?
Thanks,
Pete

Updating the firmware on your model of iMac can only be done when a Mac OS 9 system is used to start up the computer; this system can be located on the hard disk, an USB flash or hard disk, or an external FireWire hard disk. You cannot use the system on a Mac OS 9 CD for this purpose without installing it.
(19938)

NW portal for development purpose to install locall computer

Similar Messages

Maybe you are looking for