NW preview edition and MI web console
Hi,
Is there a reason the NW Java preview edition doesnt have the MI web console? Since the ABAP edition has related MI components.
Thanks
Hi Yakub,
Please deploy LMtools.sca then you will be able to see the NWMAdmin links...
you can find it in below link...
https://service.sap.com/swdc
Support Packages and Patches - SAP NetWeaver- SAP NETWEAVER - SAP NETWEAVER 2004S"- Entry by Component- Mobile Infrastructure (MI) -LIFECYCLE MGMT TOOLS 7.00-#OS independent- LMtoolsxxxxx.sca
Regards,
Satyendra
Similar Messages
-
Netweaver Preview edition and MI
Hi,
Is it possible to run MI on the preview edition of SAP NW abap + java stacks?
If yes, where can I find documentation on who to properly configure the abap and java stacks to properly work with MI.
also the java stack doesn't have web console?
ThanksHi Yakub,
Please deploy LMtools.sca then you will be able to see the NWMAdmin links...
you can find it in below link...
https://service.sap.com/swdc
Support Packages and Patches - SAP NetWeaver- SAP NETWEAVER - SAP NETWEAVER 2004S"- Entry by Component- Mobile Infrastructure (MI) -LIFECYCLE MGMT TOOLS 7.00-#OS independent- LMtoolsxxxxx.sca
Regards,
Satyendra -
Previewing edits and start/stop points
OK, so I'm still new to this program (I've worked with ProTools and Cakewalk, but this is a bit different), so please bear with me. I'm trying to sample and adjust the different plugins for a track, but I'm running into trouble on two different fronts, thus two different questions:
1. Is there any way for me to preview any adjustments I make to the plugins before I implement them into the automation? That way, if I feel like something is wrong, I can simply re-adjust without having to rewrite the automation?
2. How do I select specific starting and stopping points within the track while editing and doing automation? As in, when I press stop twice, it goes back to a specific point in the song (as opposed to the beginning).Hey Onigami,
we talked about last week here.
Why don't you run the plug-ins on several busses and do a volume automation on the bus?
2. when you see the (yellow line - volume) (press V on seleted track) click on the line with the cursor to add points (dots) then drag them.
Press the loop tool or simply press and drag with the mouse up in the measure bars numbers (light green line) and it loop over the selection.
to resume from the beginning press return, if you don't have the punch in or loop engaged (both green) when you press the space bar twice it should resume from where it stoped, if any of these are on it allways start from the selected point.
Best regards,
Jorge -
Preview, export, and upload web photo galleries
This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WSA20E5E2B-1F61-4c59-A3F4-13C1AEF9EF56.html
In the web photo gallery, exporting seems to automatically create 4 sizes of images: large, medium, small and thumb. Because of copyright and bandwidth concerns, I start out with small images anyway. What Lighroom does, however, is to still create images for each, small, medium and large to be exactly the same size, and then the thumbnail. Ie I end up with bloating website which is 3 times as large as what it should be. Multiply the space wasted by thousands of photos, and you'll soon see that it is extremely inefficient way of creating a web presence. Then I have to FTP the mass to a remote server. Crazy. Yet, I cannot find an option anywhere (incl the help text) to turn off the bloatware. Adobe. How do I create only one size of image during export, namely original size, plus a thumbnail? That is all I need.
-
I've run across an interesting problem. After applying SP1 update rollup 2, I decided to re-organize my runbooks by placing them in a new folder naming structure.
I created the new folder structure under the runbook server in the runbook designer. I then right clicked and moved the runbooks to their new location. Everything was fine until windows updates were applied (Windows 2012) and the server was restarted.
After the restart, the runbooks are missing from both the designer and the web console.
I saw posts about truncating the Authorization Cache. I did that (see below) but that has not resolved my issue.
TRUNCATE TABLE [Microsoft.SystemCenter.Orchestrator.Internal].AuthorizationCache
EXEC [Microsoft.SystemCenter.Orchestrator.Maintenance].EnqueueRecurrentTask 'ClearAuthorizationCache'
EXEC [Microsoft.SystemCenter.Orchestrator.Maintenance].EnqueueRecurrentTask 'Statistics'
Not all the runbooks are missing. Some are visible. However, if I view the runbooks via SQL by querying Orchestrator.dbo.Policies, I see all of the runbooks. They just all don't show up in the designer.
SELECT * FROM [Orchestrator].[dbo].[POLICIES] Order by Name
The ones that are missing are always the same when the web console or designer is run (designer ran with and without elevated permissions).
Has anyone else seen this behavior? How do I get the runbooks to show back up in the correct folders? Or, how can I get them to show up anywhere so I can move them to the appropriate location?
Thank you
TedHi Ted,
sometimes seen similar.
It's not supported to manipulate the Orchestrator DB with SQL, but I know only to fix it with SQL statements.
All information below without warranty!
There's a column named Deleted in table Policies. Look with your select statement above if the Runbooks have the deleted flag. If yes, update it to 0.
But, I guess not. I think the previous containing folder has the deleted flag (table folders) and the Runbooks have still this folder as ParentID.
SELECT POLICIES.Name AS RunbookName, FOLDERS.Name AS FolderName, FOLDERS.Deleted AS FolderDeleted
FROM POLICIES INNER JOIN
FOLDERS ON POLICIES.ParentID = FOLDERS.UniqueID
WHERE POLICIES.Name = 'Name of one Runbook'
If so, change the deleted flag from the containing Folder:
UPDATE FOLDERS
SET Deleted = 0
FROM POLICIES INNER JOIN
FOLDERS ON POLICIES.ParentID = FOLDERS.UniqueID
WHERE (POLICIES.Name = 'Name of one Runbook')
after that Restart Management Service and Refresh view in Runbook Designer
Good luck!
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu -
Hi there,
I have downloaded the NW04 SP15 Sneak Preview Edition from SDN and it has EP6 along with it. I am working on it at the moment. I would like to know whether there are any differences between the sneak preview edition and the licensed version of the portal? Or is it exactly the same, and the difference lies only in the license?
Thanks in advance for any replies.Thank you Abdul. It seems working though I did get different error - password not confirming to policy. I need to figure out what the ps requirement is (length, special char,...).
-
Where is the web root directory in Database 10g Express Edition and APEX
I'm developing a mod_plsql application with database express edition and the APEX version that comes with.
It works fine for developing mod_plsql applications(http://localhost:8080/apex/mypackages), but I could not find the different web directories to put my static html documents, css, gifs etc.
I could also not find a way to configure the webserver.
There's no apache installed.
Can somebody help me.
Thanks Romanhttp://daust.blogspot.com/2006/03/where-are-images-of-application.html
-
Yes, new web-developer all-in-one tools are total mess.
I didn't find the answer to this question either https://support.mozilla.org/en-US/questions/955612 but downgrade to Firefox 19.
But nor in Nightly, nor in Aurora, nor in Firefox Beta, nor in Firefox 20.0 I can use simultaneously web-console (where I test some style changing javascript code) and element inspector (where I instantly observe a reaction to my code). The only option I see is to switch every three seconds between them. How can I fix this except downgrading?You can consider to use the DOM Inspector extension instead of the built-in Inspector.
*DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/ -
Cant open up web console after install db 11gr2 and show weird symbols?
i just finished installing oracle database 11gR2. after successful install, i will usually want to open up web console at http://localhost:1158/em..
however if i open up the page i get a weird symbol on the top left. i also cant login to the db using any db management software.(im using toad)
Could anyone help me as to what i should do to fix this?and i would also like to what is the cause of this?
This is the error i got:
http://imageshack.us/photo/my-images/207/errorph.png/This is the Oracle Forms Forum. You might have better luck posting the db forum:
https://forums.oracle.com/forums/category.jspa?categoryID=18 -
Can iWeb Be Used To Create and Edit Completely Seperate Web-Sites/Pages?
Is it possible to use iWeb to create completely separate web-sites/pages? As far as I can tell even what is called NEW SITE simple creates a new nested SITE folder.
I want to use iWeb to edit totally separate web-sites.
I want to be able to make a single word change on my home page without having to upload and replace my entire site.
My work around for example would be to keep my Photo and Movie Album separate (where most of my memory intensive files reside)from the part of my site which is mostly text. And when I make a single word change to my home page I would simply upload that page. I would have a link from my home page to my Photo and Movie Album - much like I edit web-pages in Dreamweaver.
Any suggestions?
thanks.There are many ways to create brand new Domain/Site/page, see my posts:
http://discussions.apple.com/thread.jspa?messageID=6460488�
http://discussions.apple.com/thread.jspa?messageID=6007612�
Splitting domain.site(2) is bad juju:
http://discussions.apple.com/thread.jspa?messageID=6261141� -
Question: How to edit and/or delete photos uploaded to web gallery?
My Dad uploaded some photos to my web gallery without renaming the photos. Is there any way I can go in and edit and/or delete these photos? Sorry if it's a dumb question... I'm new to iLife '08 (really new to iLife in general)... and for the life of me can't figure out how to edit and/or delete these photos (without deleting the whole library).
Thanks for any help!
Ciao ~ LouieGuess I just answered my own question.
For anybody else that may be wondering...
From within iPhoto there is a "WEB GALLERY" tab in the left side menu. There you will see the name of your web gallery with a little icon that looks like an antenna. If you click on that icon... it will sync your web gallery photos that have been uploaded by other users into iPhoto. You can then edit and/or delete the photos within iPhoto and the edits will automatically change on the published web gallery (may depend on sync preferences... mine changed automatically). -
IDX LDAP web-console and sso framework
For anyone that is intersted, or is doing a fair amount of development work with directory servers... I have finally finished a product that allows anyone to connect to Active Directory and OS X Open Directory servers via web console and integrate external applications very quickly.
http://www.authentisoft.com/products/idx/
The product runs on just about any J2EE server or database.Hello,
this should be asked on one from
http://social.msdn.microsoft.com/Forums/en-US/home as the problem belongs to programming and not working within the forums where this page is for.
Thank you for understanding.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
Why won't Text Edit and Preview open in Lion?
I have installed Lion over Snow Leopard on my MacPro Dual Core Intel Xeon AND also mad a clean installation on an external hard drive.
In neither case will Text Edit or Preview open.
When I first log into Lion as the various application open on the desktop I notice that a couple of Text Edit files on the desktop mount a coloured icon. After everything is done the icons revert to a grey and white one with a grey "RTF" in place of the picture.
I found the same problem with pages (1Work 9.0) but then I found and upgrade in the Lion recovery pages on the Apple website. Unfortunately there is nothing similar for Text Edit or Preview.
Otherwise everything else seems to work.I just found the solution on our problen on another post entitled:
After upgraded to LION, Preview.app and Textedit.app keep crash
The problem only occurred on one account on my machine. For that account the ownership on the "Library" folder at the root level of that account was wrong. I set it to the credentials of that user (me) and now both Preview and TextEdit open and work without crashing. This is a hidden folder when in the Finder, but I use the Terminal application a lot, and from there I did a chown to change the owner and group of the Library folder. An additional problem is that you need to have root access to make the change.
The discussion I refer to above gives the procedure to use when in the Finder, so if you're not familiar with using the Terminal window, that is probably the best solution. In that discussion, see the post from Silvertoe on Jul 21, 2011 10:08 PM.
Good luck. -
After manually downloading and applying IR11 which it said was successful, when I try and go into the web console from the Manager I get an error "Unexpected result parsing XML from Zenworks Asset management WebConsole server". I have tried TID10098167 multiple times now. Attempting to go in from another machine I'll see "A problem was encountered during the database upgrade. CreateWebNetworkDiscoveryWebReports.xml failed to complete." Also in the C:\Tomcat5\webapps\rtrlet\sql\mssql\failed directory is the file CreateWebNetworkDiscoveryWebReports.xml. Not sure what else to try.
Dan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
The buttons are gone for selecting, editing, and printing under my HP Smart Web since HP dialed in and fixed another problem. I have uninstalled and reinstalled the software but still no luck. All that shows up is the "HP Smart Web Printing" banner with the X to exit; that's it, no options listed below. My computer has completely crashed twice since I started using it 1/4/10. The second time the person dialed in and changed the bios and a few things in msconfig but I don't see anything there that would cause the smart web printing. HELP. Am I missing something really silly since I am a new user of HP Smart Print?
Thank you in advance if you can help!
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^Put behind you the troubles of yesterday, today's a new day full of blessings.
^j^May you and your loved ones be blessed with peace, love, joy,and health now and forever.
^j^CarrieI am REALLY annoyed to read this post. I have spent a lot of time to try and fix my computer (which I don't have with 5 kids...not your problem I know and NOT the point). It should NOT be this hard to update and fix a product. I DON'T WANT the Bing bar...and am feeling like I am being forced to accept it to make my puter run correctly because it is supported by HP. What....kind of service is THAT???????? I hope that someone from HP....admin or whatever...reads this. I am "madder" than mad. I have had HP products for years with few problems...and all of which I could find a solution for. This is unacceptable...and I hope someone listens. I don't know if I can trust HP again....when it won't even use the browser most use without problems. Sorry to the rest of the "forum" for venting...but I can't get help...am frustrated...find this out now...and it is nothing personal.
Maybe you are looking for
-
This is file I created in SnapzPro (which was saved as a Quicktime mov - Animation) of a Powerpoint Presentation.
-
Does anyone know how to print from color to black on Acrobat x pro
The version doesnt seem to have the print in black option it does have print in grayscale but it doesnt do anything to my doc.
-
How to capture alert text messages defined in RWB to CCMS
Dear Team, I have configured for Alerts in RWB to capture Integration and Adapter Engine failure messages. I am getting a detailed description of alert text in the alert inbox. Example:Error found in MAPPING.EXCEPTION_DURING_EXECUTE for the MAPPING
-
Unable to Supervise Retina Display iPads in Configurator 1.4
Hi, I've struggled all day trying to get the last 3 ipads at my school updgraded to ios 7 and supervised. Whenever I to through the supervise setup step in configurator 1.4 (Version 1.4 (351)) When the iPad reboots for the last time and starts the s
-
Special characters in iPhone.
Hello, I'm trying to write a street address in a contact but, when it arrives at the door number + the floor number I need to write the 'º' character (e.g. nº 14/ 2º Direito) does anybody knows how can I do that?