NW -Sneak Preview ABAP Error

Hi
I hav installed the ABAP Version in my machine. when i try to login to SAP and starting the NSP database i was not able to login to sap. i am encountering the following error
An invalid request was made to the database interface
when accessing  table "DOKTL"
Last error logged in SAP kernel                                                                               
Component............ "NI (network interface)"                                   
Place................ "SAP-Server Ganesan_NSP_00 on host Ganesan (wp 0)"         
Version.............. 38
Error code........... "-16"
Error text........... "verify own hostname 'Ganesan' failed"                     
Description.......... "NiIMyAddrVerify"                                          
System  call....... ""
Module............... "nixxi.cpp"                                                
Line................. 7458                                                                               
The error reported by the operating system is:                                   
Error number..... " "                                                            
Error text....... " "                                                            
Pls suggest me
Ganesh

did you install loop back adapter and configured the IP address
and set the IP address 10.10.0.10 pointing to your host Ganesan in windows/system32/drivers/etc/hosts file?
Regards
Raja

Similar Messages

  • Error installing  SAP Netweaver Sneak Preview ABAP

    Hi
       I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
    ERROR 2006-04-04 13:51:02
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
    ERROR 2006-04-04 13:51:02
    FCO-00011  The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
    I'm on Windows XP SP2 Profession.
    By the way... is this the right forum?
    Thanks in Advance

    Hi
    This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
    Thanks
    prince jose

  • GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP

    Hi,
    I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
    Thanks for Your help,
    Markus
    SAPinst is getting started.
    Please be patient ...
    starting gui server process:
      sapinstport: 21200
      guiport    : 21212
      command    : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
    The process that should run the GUI Server could not be started.
    Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
    directory of your Java installation. As an alternative you may start the GUI Server on another host
    (for details please consult the installation guide).
    103 controller.errorStartingGuiWindows  1580
    Exit status of child: 1

    Hi,
    I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
    What strikes me:
    'command : "C:\Programme\Java\jdk1.5.0_02...'
    Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
    I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
    Message was edited by: Markus Jarasch

  • Sneak Preview WDA - Error after I restart my laptop

    Hi,
    Happy X’mas to you all.
    I successfully installed "NetWeaver 2004s Sneak Preview ABAP" in my notebook, after I install I was able to logon (NSP) and was able to see the example given in the document and was able to successfully test the example. But for some reason I restarted my notebook and when I try to logon again I am getting error “partner not reached (host XXX.X.X.X, service sapdp00) WSAECONNREFUSED: Connection refused”.  What could be the reason and how I can overcome this error? Did anyone face the same problem? Could someone help me in resolving this problem.
    FYI: I was able to logon to other systems (on server through network) but the problem is with NSP.
    Appreciate your help.
    Thanks and Regards,

    Hi,
    Thanks a lot for the response. This would have had definitely solved my problem yesterday, but, because of my impatience or because of my eagerness to work on that Sneak Preview, I myself couldn’t wait for such a long time for the response from you or from anybody and played around with the installation and with that I started facing the problems and later realized that I should use MMC to start the engine. Now I logged my recent problem in the following Topic “Sneak Preview SAP NetWeaver 2004 - Error while installing it again”. If you can, could you help me in resolving this issue?
    Your help will be highly appreciated.
    Thanks and Regards,

  • NW2004s sneak preview ABAP - BI

    Hi all,
    I have installed NW2004s sneak preview ABAP succesfulLY in my laptop. Now i created a cube, data source and ransforamtions in client 001 and tried to load data from a flat file. I m getting an ABAP run time error when i execute a DTP or info package to load the data.
    How can i solve this problem.
    Has any one come across this situation.
    Regards
    Praveen

    Check out the note 946481. This should resolve your issue.
    Please update the output
    Regards
    Pankaj

  • Sneak Preview ABAP Edition just released

    The Sneak Preview: ABAP Edition is now available. Kathy just announced it in the forum: Sneak Preview Update: ABAP Edition just released!!
    The link to the Sneak Preview stays the same: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
    Basically this is a "slim" or "mini" ABAP installation with a compressed database component, comparable to the "slim" Java version. It's supposed to run with a minimum of 1GB but 2GB RAM is recommended.
    Feedback on this edition, like the others, should go in the SDN Code Sample/Download forum (Software Downloads).
    Cheers,
    Marilyn

    It would be really awesome to see the community weigh in on their experiences with this installation.
    I'm going to suggest that we find a way to reward participants for doing a good job of sharing and documenting their experiences with the installation.
    One idea would be to give a "double point" allocation.
    That means that good content contribution (articles, blogs, detailed forum posts in a separate marked thread) that articulates the substance of what a downloader does in the course of the new ABAP Sneak Preview installation: tips and tricks, installation guide details, observations and detailed opinions,  will be <u>doubly rewarded</u>.
    Hey, this is a very time consuming activity, as I am experiencing myself at present.
    Thoughts?
    Marilyn

  • BW reports (BEx Reports) in Sneak preview  ABAP version

    Hi All,
    Is it possible to display  the BW data in BEx reports with help of Tr code  RRMX  in Sneak preview  ABAP trail version.
    When i try to run Trcode RRMX system says <b>Please install Excel as viewer.</b>.
    Please let me know , how we can display data.
    Regards.
    Hari

    Hi,
    May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
    check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
    If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
    You may troubleshoot using below link
    Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
    Hope it helps.
    Regards,
    Srikanth

  • BW Reports( BEx reports) in Sneak preview ABAP trail version.

    Hi All,
    Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
    When i try to run Trcode RRMX system says Please install Excel as viewer..
    Please let me know , how we can display data.
    Regards.
    Hari

    Hi,
    May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
    check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
    If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
    You may troubleshoot using below link
    Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
    Hope it helps.
    Regards,
    Srikanth

  • ADS for SAP NW2004s Sneak Preview ABAP..

    Hello folks,
    Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
    Regards,
    Sarath.

    I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.

  • Sneak Preview ABAP - Password for Database Manager Operator Control

    Hello All , My first installation 'SAP NetWeaver 2004s Sneak Preview ABAP' was aborted where I did supply the password for Database Manager Operator Account : Control . When I am trying to reinstall , the installation fails and it comes back with a message
    ' The check of the control user password failed . Check logfile XCMDOUT.LOG '.
    I think I am supplying the correct password which I entered originally .
    Thanks
    Rajesh Kapoor

    hi there,
    the default password for control is control.
    According to about threethousandfivehundredandtwelve postings in here your problem might arise due to the usage of special characters in the password, e.g. a +(plus).
    What do the last few lines of your XCMDOUT.LOG read?
    regards,
    anton

  • Sneak Preview ABAP NW04s license expired

    Hi,
    I havenu00B4t been using the SNeak Preview ABAP 2004s system for a month. Now I want to use it again, but the license expired at Oct 17. I put the system in back date, i.e. Oct 16 to be able to connect with the system and I tried to install the new license, which I got from SAP Developer Network.
    My problem is that I am not able to install the new license. The expiration date is 20070221 because I got the new license, but when I try to install it, the system hangs and after a while I get a Dump.
    I start the system with nspadm user and I also tried with c:\usr\sap\NSP\SYS\exe\nuc\NTI386\saplicense -install, but it was impossible too.
    Please, can anybody give me an answer for this? Any suggestion?
    Thanks in advance
    Investiga

    I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
    Anyway, Thanks a lot to all
    Investiga

  • Sneak preview ABAP - Developer Key too long.

    I installed Sneak preview ABAP edition and I requested the developer key, the key I have received is of 24 digits where as the size of the screen field is 20 digits. I don't know how I can get the correct key.
    Thanks,

    Hi Gregor,
    I could'nt able to give 10 because, I resolved the issue my self by referring to the article you wrote and I set this question to solved before you sent me the link. The radio button for the "Solved Problem (10)" is disabled. Any way I will give you another 6 now. Enjoy.
    Suman

  • Installation Sneak Preview ABAP 2004s: iaextract.c:814 error

    Hi,
    I am trying to install the abap sneak preview 2004s on a xp system.
    When I start the script SAPinst.bat the server starts and after a while I get a popup with the error message:
    iaextract.c:814
    The GUI window is not even display a single time.
    Please find the last lines of dev_selfex.out below:
    iaextract.c:592: Extraction finished with 0
    ianxsysex.c:171: existsDirectory(jre) returns 0
    ianxsysex.c:203: chdir(C:\SAPNW2004sSneakPreviewABAP\Installation_Master\IM_WINDOWS_I386) = 0
    iaextract.c:799: selfexRun()
    iaextract.c:626: selfexGetCommandline()
    iaextract.c:636: No RC file C:/DOKUME1/Gerhard/LOKALE1/Temp/sapinst_exe.1672.1138396048/sfx.rc found, using builtin default.
    iaextract.c:804: self->argv[0]: C:/DOKUME1/Gerhard/LOKALE1/Temp/sapinst_exe.1672.1138396048/sapinst.exe
    ianxsysex.c:424: cmdline: "C:\DOKUME1\Gerhard\LOKALE1\Temp\sapinst_exe.1672.1138396048\sapinst.exe"
    ianxsysex.c:488: selfexWaitForChild()
    ianxsysex.c:504: Exitcode was -2147483645
    iaextract.c:814: child has signaled an exec error. Keeping directory C:/DOKUME1/Gerhard/LOKALE1/Temp/sapinst_exe.1672.1138396048
    ianxcsapstart.cpp:199: ExitInstance()
    iaextract.c:537: Starting cleanup
    Regards
    Peter

    Hi Peter,
    Note 851251 gives some info about SAPInst 701. It does
    show the same problem that you got(but after
    installation), and tells to ignore it. This error usually
    occurs on UNIX systems because either "DISPLAY" variable
    is not defined or the root user has memory allocation
    problems.
    Regards
    Srikishan

  • NW04s 07 java sneak preview installation error

    Hi,
    I am getting the following error when I am trying to install NW04s 07 java Sneak preview .
    <b>ERROR 2006-09-20 00:15:09
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilRebootDrv' does not exist on the 'localhost' host.</b>
    I have the localhost entry in the hosts.ini file and turned off Norton anti virus.
    Appreciate quick response
    Srini Sandaka

    have a look may be it helps you
    Re: Netweaver 2004s ABAP Sneak Preview
    Regards
    Subhash

  • Sneak Preview ABAP 2004s: Problem with HTTP-Server

    Hi..
    I have just installed the sneak preview.
    Everything works well.
    But there is a problem with the webdynpro
    for abap. When i try to start the example
    i become a message: "Windows can not find
    ://:/sap/bc/webdynpro/sap/wdt_quiz ....... "
    This error is from the HTTP options.
    In transaction SMMS over extert functiuns->http->display
    the parameter  http_status_code is -1.
    Can anyone help me what i can do?

    when you go into transaction SMICM->go to ->services you should atleast see one entry for HTTP
    it will be something like below.
    No. Protocol           Service Name/Port    Host Name            Keep Alive Acti External Bind                                                                               
    1  HTTP               1081                 xxxx.domain.com        30                       
    i dont think that for this reason , you have to go for a reinstall, i am sure some config is missing.
    Regards
    Raja

Maybe you are looking for