NW Sneak Preview EP 6.0 SP4 and TREX

Greetings.
I installed the sneak preview edition with KM and it works fine. We would like to install TREX.
Did anyone tried installing TREX along with the Sneakpreview. If so could you please let me know the version and any other tips.
Thanks in advance.
- PK

PK,
Have you had any success configuring TREX with EP 6.0 SP4? I have been trying myself and have not had much luck.
After a successful install of TREX 6.0.1.2.0 on a seperate server, I receive a java runtime error in the Portal TREX monitor.
I have also noticed that in the Portal, under System Administration -> System Configuration -> Knowledge Management -> Configuration, there is no TREX folder.
I am beginning to think that you cannot install TREX onto this trial version of EP. Do you agree?
Thanks,
Matt

Similar Messages

VC and Sneak Preview

Hi,
I have installed the Portal sneak preview with WAS 6.40 and Portal SP7.
VC 6.0 patch 2 is installed on the same machine .
I have configured a SAP system on the portal but I can not see it in the system list in VC after logging on to the portal. (Alias is created and user mapping is configured on the portal).
In the portal log files entrie like :
om.sap.portal.guimachine.portalconnector.Login#
#1.5#000374890932004A000001AD0000039C0003EAAA3E857D62#1102442120621#System.err#sap.com/irj#System.err#Guest#2#####SAPEngine_Application_Thread[impl:3]_19##0#0#Error##Plain###com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in connection#
What is wrong ?
Thanks for any hint.
Marcus
Message was edited by: marcus schiffer

Hi Marcus,
Please make sure that:
1. System alias is defined.
2. User mapping is defined for that alias and you use the same use in Visual Composer Story Board.
3. You have installed the latest SDAs from patch 2 on the portal side.
Regards, Eyal

Sneak preview Installation error, file source.properties not found

Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. K

Hi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru

Java WebDynpro - Sneak Preview

Guyz,
I installed java stack (sneak preview) couple of months back and when now i'm switching it on, my J2EE Server is automatically switching off after certain time.....
upon checking logs in 'Developer Trace', it says its shutting down while license check failed .....
can anybody tell me what should I do other than reinstalling sneak preview....'coz thats a pain....
out of curiosity when it says licence check, what exactly it check in the system to validate the expiry ...i.e., in normal r/3 instances we have transaction code SLICENSE...do we have any similar stuff in java stack ??
Thanks in advance

Hi,
Interesting thing is though the date is in future date, but the validity says 'Not Valid'. Donot understand why ?
anysuggestions pls ?
Thanks

Sneak Preview Full Edition Availability & System Requirements

Can anyone tell us authoratatively when the Full Edition (Java + ABAP) of the NW04 Sneak Preview will be available? And equally importantly, for planning purposes, what the minimum and recommended system requirements will be?

In the download area you can get the Full Netweaver (ABAP + Java) for Linux. This has been available for a little while.
Now, what you are asking is the same I've been waiting for: the Full version for Windows.
I had expectations that it would be far down the road, but since the version ABAP was released today, I feel like we may get it soon.
I suggest you keep watching the forums and visiting SDN regularly (like me). An estimate release date will come out sometime soon.
Leonardo
Message was edited by: Leonardo Araujo

Guide me how do download the Java Edition of the Netweaver Sneak preview

Can Some one please guide me how do I download the Java edition , I have Core FTP installed, On doing a save target as it asks me whehther to use Core FTP for file transfer, on choosing yes it a status window which says connecting,with source and destination values and then gives a message NW04SneakPrevJavaSP11.part1.rar-File not found....
and thereafter the File Download Dialog still remains trying to find for the source location.....
Some Kindly guide me the right way to do it

Hi Paras,
I just tried to download, no problem. I click on <i>Downloads -> Web AS -> New! Sneak Preview -> Download file 1</i> and get a popup where to save the file.
Please try again with the given path.
By the way, it should be enough to post your problem once
Hope that helps!
Best regards
Renald

Problem: Update Linux sneak preview to sp 17

Hallo,
I have updated my Netweaver from 04 to sp 17.
I get the following error from sapinst.
ERROR 2006-08-07 14:21:33
CJS-20057 Starting J2EE Engine DVEBMGS00 of SAP system NW4 failed: after 46 seconds the state of the engine changed from "Synchronizing" to "Stopped".
with "sapstart" I also can not start the dispatcher and sinstance anymore.
I am running on Suse 9.2
it seems there ist a problem with the boostrap.
from bootstrap.log:
com.sap.engine.frame.core.configuration.NameNotFoundException: A file entry with the name "FontManagerService_native.zip" cannot be found in the configuration "cluster_data/os_libs/nuc/ntintel/32".
Error from devf_disp:
on Aug 7 16:19:16 2006
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 15
Release check o.K.
Mon Aug 7 16:19:22 2006
MBUF state ACTIVE
Mon Aug 7 16:19:23 2006
DpModState: change server state from STARTING to ACTIVE
Mon Aug 7 16:19:37 2006
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=23283)
ERROR => DpProcKill: kill failed (3: No such process) [dpuxdisp.c 599]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Can somenody help me please ?

sry - I did not see there is a exrta form for sneak preview - pls close this thread and I will post it in the other forum

Loading Java Sneak Preview freezes at Load Java Database

I have tried installing the java sneak preview on two different machines and it freezes everytime at Load Java Database. I searched the form and found a similiar post with no response. Has anyone had this problem or any ideas.
1st Box was WinXp 1gig ram p42.8
2nd Box was Win2003 1gig p41.8

Agustin,
Were you able to solve your situation ?
I have the same situation, I have an ABAP NW2004s (v7.00 SP8) installed and working on my PC. I am trying to install the Java NW2004s FULL on the same PC, and after entering the location for the JCE files, the setup displays message:
Collecting information about installed SAP systems: checking SAP service SAPNSP_00...
then an error comes up, the log has the following :
ERROR 2006-11-16 15:03:13
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2006-11-16 15:03:13
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
I am installing on a PC WIn XP SP2, with 1GB of RAM, and have 16.7 GB available on the Hard Disk.
Please let me know, thanks

PDK for EP Sneak Preview SP4

Hi.
I installed EP Sneak Preview SP4 and I want to use PDK.
- Which version of PDK can I use for EP Sneak Preview SP4 ?
( PDK 6.0 SP3 is OK ? )
- Where can I get PDK eclipse plugin for EP Sneak Preview SP4 ? (I found PDK eclipse plugin SP2. Is it works for EP Sneak Preview SP4 ? )
Regards,
Arnold.

hi,
you can deploy the pdk60.3 via sdm to your sneak preview.
the eclipse-plugin is then downloadable in the portal in menu Java Development / Tools / Downloads.
but if you use the netweaver developer studio, there's no need to download the plug-in, since it's already in the nds implemented. you'll only need the plugin for an eclipse (2.x) installation (or eclipse base, like ibm websphere studio).
kr, achim

HTMLB and Java EE 5 Sneak Preview?

Hello *,
I recently installed the Java EE Sneak Preview. I'd like to develop some JSP that still use HTMLB. But I could not find any information, whether the Java EE Sneak Preview includes or even supports HTMLB, Do you have any information about that? I already searched the plugins folder of the SAP NetWeaver Developer Studio, that ships with the Java EE Sneak Preview. But I couldn't find a "htmlb.jar" or something like that. Is there any documentation about this?
Kind regards, Lars

Hi Lars!
Actually the Java EE 5 Edition IDE does only contain Java EE 5 standard tools that are based on Eclipse's WTP. There are also a few administrative SAP specific plugins bundled: MaxDB client plugins, SAP MMC for Eclipse and a Deploy View for SAP specific deployment.
Best Regards,
Robin

SAP NetWeaver Sneak Preview and Trial

Hi,
I am new to SAP Netweaver Enterprise portal (java)
I donloaded SAP Full Java Edition-Trial -SAP NetWeaver 04 SP16. which is with out visula composer support.
There is another SAP NetWeaver Sneak Preview and Trial.
Which with visual composer support.
That is Full Java Edition2004s-Trial - SAP NetWeaver 04s SP7.
so let me know which Service pack is first.
Weather SP16 is first or SP7 is First.
regards
mmukesh

Hi mmukesh,
you have to understand that there a two seperate NetWeaver releases (NetWeaver 2004 and NetWeaver 2004s) with their own support packages.
Read more here:
Re: difference between 2004 and 2004s?
Regards,
Martin

Sneak Preview of WAS 640 and ABAP Engine

Hi all,
I installed the Sneak Preview of the WAS 6.40 on a WinXP system an tried out most of the examples and tutorials.
It is working fine and the developer studio is also very nice.
I am wondering whether the abap engine is also available in the sneak preview or is it restricted to the java side only?
Best Regards,
Steffen

Hi Steffen,
all you need for this type of communication is already included in the WAS. There's a lot of documentation available:
JCO (Java Connector for ABAP backends): http://help.sap.com/saphelp_nw04/helpdata/en/35/42e13d82fcfb34e10000000a114084/frameset.htm
Generating proxies "around" JCO (very useful feature of the developer studio):
http://help.sap.com/saphelp_nw04/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm
Using ABAP EIS in a transactional J2EE environment via J2EE connector architecture: http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5caa85b11d6b28500508b5d5211/frameset.htm
This should be sufficient for the beginning
Hope that helps.
Best regards
Stefan

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

How to use JCo Provider Service w/Sneak Preview and Test Drive

I have both SAP Web AS Sneak Preview (6.40) and MiniWas 6.20 Test Drive installed on a single system. I have implemented a Java server program which can be RFC called from an ABAP program using JCO.
The only disadvantage to this process is that I must manually run the server program each time I bring up the J2EE system.
I would like to set things up so that when I start the WebAS 6.40 J2EE system, the server function can be automatically registered (if I'm using the correct terminology - not at all sure about that...). It looks to me that I should be able to use JCo Provider Service to do what I want to do, but I don't know how to do any of the session bean creation and I esp. can't seem to find out how to run the J2EE Visual Administrator, which the documentation I've found leads me to believe needs to be used.
Is there a tutorial, or example, that will lead me through this entire process? I have the ABAP calling program working OK, and I have the Java JCo server program working ok - I just want to create something in Java that will operate like a good old C Language function installed as an RFM.
Can anyone help? Is it possible?

Stefan:
Well, I guess I'm stuck at the first step.
As I understand it, I have to use the Visual Administrtor to register the Web AS 6.40 Sneak Preview system as an RFC destination. When I bring up the Visual Administrator, it has essentially two tabs showing: Dispatcher and Server. It's inviting me to define a connection and Login. So, Q1: Is it inviting me to login to the J2EE or the Web AS? Either way, I am never able to login - I get this error:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext
I used all of the NetWeaver sneak preview defaults when installing, and I recorded these:
Type               Account
OS User            Compaq-laptop/J2EAdm
OS User            Compaq-laptop/SAPServiceJ2E
DB User            SAPJ2EDB
J2EE Engine User   Administrator
J2EE Engine User   Guest
Q2: Is it possible to do what I'm trying to do with the Sneak Preview system?
Or am I trying to connect and logon to the Web AS 6.20 Test Drive (I don't think so...)? I used the defaults when installing the Test Drive, and have these users:
BCUSER
DDIC
Is it one of these I should be logging onto?
Also, Visual Administrator wants a port specified on the J2EE Engine connection paramters - what port should I be specifiying?
Can you get me past this dilemma, Stefan? Thanks...

Sneak preview of Guided procedures ( CAF ) on EP 6.0 and higher

Hi
I am looking to build some prototype workflows on CAF- GP ( Guided procedures ) . I understand that GP runs on enterprise portal 6.0 and higher. Could anyone please forward me the correct link to a sneak preview download of enterprise portal - that comes along with GP ? I tried many links given in weblogs on EPs - but none of them take me to a location wherein I can download the sneak preview of EP 6.0 or higher ...
Please help...

Is there no location on SDN where in I can get a working - sneak preview ( trial version ) download of Enterprise Portal - seems very strange.

NW Sneak Preview EP 6.0 SP4 and TREX

Similar Messages

Maybe you are looking for