NW04 SP11 freezes during step 15 of 19 Deploy online

Dear SDN,
  I am trying to apply NW04 SP11 to WAS640 SP09. The installation freezes during step 15 of 19 Deploy online. Any recommendations.
Thanks
Jeremy Baker

sapinst_dev.log
INFO 2005-03-29 20:46:22
CJSlibModule::writeInfo_impl()
Output of C:\j2sdk1.4.2_07/bin/java.exe '-Xmx256M' '-jar' 'S:\usr\sap/J2E/JC01/SDM/program/bin/SDM.jar' 'deploy' 'list=C:\Program Files\sapinst_instdir\PATCH\ORA/SDAS_TO_BE_DEPLOYED.LST' 'onerror=stop' 'sdmhome=S:\usr\sap/J2E/JC01/SDM/program' 'logfile=C:\Program Files\sapinst_instdir\PATCH\ORA/callSdmViaSapinst.log' 'logtoconsole=true' is written to the logfile java.exe.log.
java.exe.log
Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
and
deafult0.trc
#SAPEngine_System_Thread[impl:5]_64##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.deploy.exceptions.ServerDeploymentException: A deploy callback threw an exception while processing event Deploy Event:
phase : local finish
operation : start an application
component name : sap.com/com.sap.ip.me.insttool
from server : Server 0 1_36535
message :
status started
application components : {webservices_container=[Ljava.lang.String;@1c83579,

Similar Messages

  • Sync of iPod Touch 4th Gen freezes during Step 6 0f 6

    Sync of iPod Touch 4th Gen on PC with Windows 7 freezes (after installing iTunes 10.5.0.142 and iOS 5) in Step 6 of 6 @ message that says "some of the items in the iTunes library were not copied because they could not be found".  This message has always come up before but I could always click on OK and sync would then complete itself without any further problems.  Have now tried re-syncing several times and same freeze-up keeps happening.  My other concern is that I have just purchased new iPhone 4S and now don't know whether to try and sync it or will it just end up with the same problem.  Any help would be greatly appreciated.

    The difference between the 8GB advertised capacity and the available 6.5 GB is due to the iOS taking ups some of that difference and the way GB is calculated and advertised. See consumer confusion in:
    http://en.wikipedia.org/wiki/Gigabyte
    The latest iOS (4,2,1) is larger than previous ones so the difference is larger.
    BTW, your exact question gets asked a couple of time a week and you could have found it by looking at or searching the iPod Touch forum;.

  • IDVD freezing during burn process

    I was trying to burn my DVD project onto a disc and iDVD kept freezing during the middle of it. It just so happened to always freeze during step 2 of the process, but Im not sure if that is just a coincidence or not. Any suggestions at how to get the program to burn my project without freezing up in the middle ?
    Thanks
    I am using iDVD 4

    Thanks dispatx.com, that page was of immense help. I found much of it very encouraging simply knowing that someone has gone through the exact same thing, missing deadlines, sleep, etc.
    I gathered as much info as I could and have successfully burned a DVD image now using the "Easter Egg" hurz & pfurz. Why doesn't apple include that in the program?
    I cleaned up my powerbook prior to burning with OnyX. I trashed the iDVD preferences. I created a new project in iDVD using the same footage I had exported from FCP as QT movies, not self contained. I included songs I downloaded from the iTunes store (debunking the myth that the protected songs foul up the burning process). I held down ctrl and clicked burn, named the image, and then it went to work.
    Timeline:
    6:00am started step 1, 10 secondes later, step 2 begins.
    9:00 Step 3, Asset Encoding begins (Hallelujah, I never could get to this step)
    9:50 Step 4 begins, mulitplexing
    10:20 Image is ready and iDVD is asking me to name the image again, I finally figured out this gives me the option of burning several copies, I did and it only took another 15 minutes to create another image instead of starting the whole process over again.
    10:40 I drop it into disk utility and burn a 3.7 GB DVD in 20 minutes.
    Oliver Luker accurately observes and records CPU usage at each of the steps so that helped me know NOT to cancel even when Activity monitor showed iDVD as not responding.
    I went with best performance because too many people were reporting over 60 minutes and best quality as not working well, and I need this DVD done. I had an extras section in the DVD that I yanked. But I don't understand why we are limited to less than 60 minutes. This angers me a bit and I'm determined to find a way to have a good looking DVD with over 60 minutes of footage that will burn through iDVD. I don't want to buy DVDSP, yet.
    Good luck everyone.

  • Server 2012 freezes during setup at the "installing updates" step

    I'm trying to install server 2012 standard on an IBM blade HS22V "7871".  Server has SAN attached storage.  Server freezes during installation setup at the "installing updates" step.  I have tried install booting off of
    a USB drive and DVD drive with the same results. 

    Im unable to boot in safemode because windows has not completed the OS install.  The install is stuck in the setup at the installing updates step.  It will sit there for days or until you crash the server.  This is what I have done so far:
    installed 2008r2 on the same LUN/SAN without issue
    Updated Blade to the latest BIOS/Firmware.
    Using the most current IBM ServerGuide "9.51" for hardware drivers.
    Attempted install in both UEFI and Legacy mode
    Attempted 3 separate install medias "cd and usb"made from ISO not cd copy
    Verified we only have 1 LUN 1 Volume Group and 1 Path
    Attempted 4 different blades and 3 different chassis. Same results.
    We have a HP/3Par T400 SAN that I can successfully install server 2012 on.  This is our old Test SAN.  We  have our new 3par 7400 SAN that is now our production SAN that we are unable to build server2012 on.

  • HT1338 My iPhoto keeps freezing during upgrading step 5 of 9.  How do I fix this?

    My iPhoto is trying to upgrade but keeps freezing at step 5 of 9.  Is there a fix for this?

    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    If that fails:
    Restore from your back up, repair the Library and try again

  • NW04 SP11 preview installation problem

    Hi all,
    I am having problems installing the Sneak Preview NW04 SP11 Java version.
    It gives we following error:
    WARNING 2005-09-25 21:17:06 Error 5
    (Access is denied.) in execution of a 'RegOpenKeyEx' function, line (67), with parameter (SYSTEM\CurrentControlSet\Services\SBCore).
    WARNING 2005-09-25 21:17:06 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SBCore' does not exist on the 'localhost' host.
    WARNING 2005-09-25 21:17:06
    The step setDefaults with step key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
    WARNING 2005-09-25 21:17:15
    An error occurred during the installation.
    I am using the Administrator account - but somehow it seams like that aint enough??
    Please help me...
    Best reagards
    Lars

    Hi everybody,
    I have now found the solution.
    The server i am installing on is my domain controller, and have SBS2003 (small business server 2003) installed - this should always be the domain controller...say Microsoft!
    But i works if I using CMD with REGEDT32.exe and editing the registry key (SYSTEM\CurrentControlSet\Services\SBCore) so that Adminsitrator have FULL acccess
    Remember us edit the Control.xml file if you are using the domain account - just like phillip has described:
    ***Phillip says:***
    In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
    Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
    I replaced:
    'name:host + "
    SAP_LocalAdmin"'
    with
    'name:this.getDomain() + "
    SAP_LocalAdmin"'
    and
    'name:host + "
    SAP_" + this.getSID() + "_LocalAdmin"'
    with
    'name:this.getDomain() + "
    SAP_" + this.getSID() + "_LocalAdmin"'
    The installation is still running at the moment, but far behind that point where the error always came up.
    For me it looks very good.
    SAP says installation on a DC is not supported, which not means that it would be impossible.
    Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
    **end Phillip**
    Thats it! - now the installation is running (still runnig )

  • IPod won't sync correctly. iTunes freeze during "Determing Tracks to Sync". Playcounts are a mess now. Please help!'

    So since a few months my iPod is starting to get on my nerves. Everytime I try to sync it, my iTunes freezes during the "Determing Tracks to Sync" step. Most of the time it takes a few minutes and then it cancels the sync. I have to sync my ipod atleast 10 times a day to get a song or app on my iPod! One of the most anoyying things tough is, that all playcounts from my iPod sync to my iTunes every time I try to sync. Example: I play Poker Face on my iPod 5 times. I try to sync and my play count says 5 times on my PC. I sync my iPod again and it says 10 times now. It's so anoyying. I restored my iPod already. I removed iTunes and installed it again (And yeah, I deleted it the way Apple wants it). I called Apple and they said I can repair my iPod for 150€, but that's just so much. Any ideas on how to fix my iPod?
    Thank you

    Hello there,
    And welcome to Apple Discussions.
    Because you reformatted your computer, your iPod does not recognize the new library because it was synced with the older library you had before reformatting. In order to get the iPod working again, you will have to [Restore|http://support.apple.com/kb/HT1339] the iPod via iTunes. Once you have completed that step, try re-syncing the music and see if that helps.
    B-rock

  • Iphone to itunes sync fail during step 3

    HI I uprgraded my Iphone to the new ios 8 and now I cant sync it anymore.
    The fail occurs during step 3 when it is transferring purchased apps.
    The error text reads "The Iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone"
    It then says "To authorize the computer for items purchased from the Itunes store, choose store > authorize this computer".
    I have tried this multiple times, even unathorized it to authorize it again.
    This Iphone still has some items under the previous owners apple ID, I dont know which ones have crossed over until it comes to app update time when it tells me.
    I have been systematically deleting them one by one as they appear then downloading the app again from the app store under my apple ID.
    Is this the correct thing to do or is this possibly why my sync is failing?

    Hello, toshrobbo.
    I've found an article that may help you sort things out with iTunes:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1717
    Symptoms
    This article provides some general suggestions when trying to troubleshoot an issue where iTunes for Windows Vista or Windows 7 won't open, stops responding, or unexpectedly quits. It may be useful to print this document before following the steps outlined below.
    Cheers,
    Allen

  • MDD DP G4 elusive diagnosis - freezes during boot up.  Tired- HELP!

    After not using my Dual Bootable  DP 1.25 GHz MDD G4 for a couple of months, it's now freezing during the boot process.
    What's weird is that it boots in Target Mode just fine, and when connected in this mode to my G5 Quad, it actually boots the G5 Quad in Target Mode just fine!    The G4 drive shows in fact as the boot drive on the G5 Quad's monitors.
    I was able to boot off a retail Tiger 10.4.6 disk, so I did an erase and install of a fresh Tiger OS 10.4.6, which I promptly updated to 10.4.11.  After trying and failing umpteen times to boot off the HD, even in safe mode, I ended up being utterly unable to get either of the Super Drives to open normally, so I had to resort to the straightened paper clip trick to retrieve the install DVD.
    Now even the paper clip fails to open either of the optical drives.
    I have twice wiped the HD from the G5 Quad after booting up in Target Mode, and installed fresh copies of Tiger 10.4.11 as described, with the Tiger install DVD in the SuperDrive of the G5 Quad.
    Since in Target Mode the G5 Quad boots just fine of the G4 HD, I think I can rule out the Hard Drive.
    I think I can rule out the battery too, as it boots fine in Target Mode and in the regular boot process it sometimes gets as far as playing the OS fresh install music after going through the registration process.
    I do have the original install disks with AHT 2.0.2 that came with the G4, but I can't get the optical drives open to insert the disk in either one of them.
    I'm thinking it could be bad RAM, but why would the optical drives be stuck, both of them??!
    I'd be most grateful for any tips as to what to try next.

    Jump all hard drives Cable Select and place the intended Master on the end connector of each IDE ribbon (each bus).
    Can you clarify, please?  Are you referencing the actual CPU?
    Yes. A very fine layer of corrosion on one or more of the 300 pins could render the machine incapable of achieving logic.
    The step should be performed after doing all the other reseats that I suggested.
    I've never re-seated one,
    Not so difficult.
    Replacement of the thermal compound is a requisite part of the proceedure, however.
    Use Arctic Cooling MX-4.
    No worries if a bit too much is applied, unlike silver based compounds....... bzzzZZTT! Dead CPU.
    My tutorial:
    9AE7FE0E-0CF2-4A7C-8003-489B282582BC.html
    I posted this for someone who wanted to remove a MDD logic board (edited for clarity, I hope):
    To remove the logic board (of a MDD):
    -Disconnect all cables connected to the logic board.
    -Remove any PCI cards, and RAM.
    -Find and remove the five screws that hold the heatsink. Remove the heatsink.
    -Remove the processor board by lifting the edges of the daughter card. After successfully pulling the card free from the connector, it might help to slide the processor board a bit to the rear and/while lifting out, being careful to clear the two mounting pegs.
    -Find and remove the one screw that holds the logic board.
    -Slide the logic board away from the back panel, lifting to avoid the chassis hooks.
    You need to pay attention to the three steps in bold. There is no screw retaining the CPU daughter card. It is sandwiched between the heatsink and the logic board socket.

  • Z10 freezes during start up

    My z10 freezes during start up. First I can see the red led on, then the BB logo and "blackberry" on the screen and it stays there forever.
    I have tried to update the OS, using BB update software option, at which after resetting my Z10 the green led stays on, though I cannot update it, getting the error message "error downloading Blackberry Desktop Software".
    Any ideas ? I need to recover information in the phone's internal memory.
    Thank you !!!

    So I did the Disc Utility, and the disc was sucessfully repaired. I restarted the iMac and got to exactly the same place as before: "Login window started" where it froze again. I turned it of, restarted in Safe Mode and it froze at the same spot.
    Is the next step to try reinstalling the OSX? I didn't see an option to install in place ie leave all my files intact. There's an "Archive and install" option. Does this just archive the system folder and erase all my other files. I'm pretty much backed up but I'd much prefer not to erase the files if I can avoid it.
    Thanks

  • What do I do when Itunes freezes during last process of sync

    What do I do when Itunes freezes during final steps of sync

    Cancel the sync and try again.  But, before you do, make sure you have turned off any firewall/anti-virus software you have running.  This often is the root cause of failed sync's. 

  • IMac is freezing during start-up from OS X installation disk

    My iMac 27" is freezing during re-installation of the complete machine from Leopard OS X installation disk. The machine ends up (also in safe mode) with a screen showing something like "horse steps in the snow" as shown in both pictures, which can be seen on:
    http://whbakker.demon.nl/screen and http://whbakker.demon.nl/detail
    I cannot find a thread or a good suggestion, what to do to re-initialize the complete machine.
    Thank you in advance for your answers!
    Willem.

    willemhb wrote:
    My iMac 27" is freezing during re-installation of the complete machine from Leopard OS X installation disk.
    Can we assume you mean your Snow Leopard installation disc & that it is a grey one that came with this iMac?
    27" iMacs are new enough that they can't run Leopard (OS 10.5), nor can they run some of the earlier versions of Snow Leopard. The installer on the disc should check for this & refuse to attempt an install if it is the wrong one, but if you are trying to boot from the disc to start the install it will never get that far. This is because the earlier OS versions lack the necessary extensions to support the latest hardware in the iMac. Thus, a safe boot won't help since there is still no source for them.
    Also, if you have installed any aftermarket memory modules, it is possible they are not fully up to spec & incapable of running Snow Leopard. You may be able to verify this by starting up from the Apple Hardware Test, which you run from the original grey system disc by following the instructions printed on it. If you get an error with "MEM" in it, it means one or more memory modules is defective. If they are aftermarket ones, contact the supplier for replacements. If they are Apple-supplied modules they are covered by a one year Apple warranty (or 3 year one if you bought the Applecare protection plan).

  • System optimization freezes during Itunes 7.6 upgrading

    Hi, the last step (system optimization) freezes during the Itunes/Quicktime/Imovie upgrading.
    What can I do ? Thanks for any advise.

    +Now I get bluescreen every time I try to open or configure Quicktime or even I if my Quicktime-Plugin for IE or Firefox starts...+
    What numerical and text codes are you getting with it? (ie 0x\[zeros/letters/numbers] CAPSANDUNDERSCORES)
    If the blue screen mentions a specific file (such as, for example ati3duag.dll), let us know what that is called too. (Exact spelling, please.)
    Here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    If you're just seeing a "flash" of a blue screen, we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (On Vista, go "Start > Control Panels", click "Classic View", click "System").
    2) Click "Advanced System settings".
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

  • My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am un to date on the OS also.

    My iPad Air always freezes during FaceTime calls using wifi. I switch to my iPhone 5c on the same wifi, and it never freezes while I'm sitting in the same location. Is there maybe a setting I have that is causes this? I am up to date on the OS 7.1.1. Video and audio is froze on my end, only video freezes on the other end. It doesn't make a difference who makes the call either.

    No, there isn't any setting that you are missing. Have you tried force closing FaceTime, and resetting your iPad?
    In order to close FaceTime, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that does not make a difference, you could try resetting all settings, if you reset all settings you will have to enter all of the device preferences again in the settings app. That takes some time to accomplish, but you will not lose my data, media, apps or anything like that. Settings>General>Reset>Reset all settings.
    If that doesn't help, the next step would be to restore the iOS software. Backup your iPad first, restore the iOS, then restore the backup.
    Use iTunes to restore your iOS device to factory settings

  • Freeze during boot after enabling Hyper-V feature in Windows 8

    Good day.
    I'm using AMD FX 8320 with 990FXA-GD65. After enabling hyper-v my pc freezing during boot.  Google told me that it might be issue with USB 3.0 controller, so i disabled it in bios, but result still the same.
    Can you please tell me where should i look at?

    Hi,
    Please try to boot into WinRE and run the Startup Repair option.
    Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
    you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
    This log file would record Windows installation process, we may find the problem of Hyper-V installation.
    Kate Li
    TechNet Community Support

Maybe you are looking for