NW04 Testdrive in Linux SuSE 9.3 64 Bit - Logon crashes with DB error

Hi there,
I just installed NW04 Testdrive on SuSE 9.3 32 Bit and it works fine .
But then I did the same on SuSE 9.3 64 Bit version and tried to logon using sapgui. The result is annoying because the logon screen crashes with the following ABAP runtime error: DBIF_RSQL_INVALID REQUEST in program SAPMSYST, include SAPMSYST, row 2529 in module NAME FILL_INFO_TAB. There is an error in databace interface while accessing table DOKTL.
I'm just asking whether MaxDB runs on 64 Bit SuSE Linux. Can anyone help?
Thanks in advance
Tobias

Hello Tobias,
according to the Software Downloads If there will be a Testdrive for 64 Bit Linux Systems.
Regards
Gregor

Similar Messages

  • Problem with install TestDrive 2004 on Suse 9.1

    I have problems with try install SAP NetWeaver 04 TESTDRIVE 2004 on Suse 9.1
    The sapdb-db-files-7.5-2.i386.rpm say this.
    error: unpacking of archive failed on file /sapdb/NW4/sapdata/DISKD0001;45e6dbc9: cpio: symlink failed - Imput/output error
    The partition have 25GB free
    I hope help
    Best Regards
    Alejandro.

    Natalia
    the dbmcli -d NW4 -u control,<password> param_getvolsall not work, is possible ?
    Suse-SAP1:/ # sdbregview -l
    DB Analyzer         /sapdb/programs    7.5.00.10    32 bit    valid
    Base                /sapdb/programs    7.5.00.10    32 bit    valid
    Loader              /sapdb/programs    7.5.00.10    32 bit    valid
    PCR 7403            /sapdb/programs    7.4.03.31    32 bit    valid
    PCR 7500            /sapdb/programs    7.5.00.10    32 bit    valid
    Server Utilities    /sapdb/programs    7.5.00.10    32 bit    valid
    JDBC                /sapdb/programs    7.5.01.00              valid
    Database Kernel     /sapdb/NW4/db      7.5.00.10    32 bit    valid
    PCR 7300            /sapdb/programs    7.3.00.46              valid
    PCR 7301            /sapdb/programs    7.3.01.15              valid
    ODBC                /sapdb/programs    7.5.00.10    32 bit    valid
    Suse-SAP1:/ #
    Suse-SAP1:/ #
    Suse-SAP1:/ # dbmcli -s inst_enum
    OK
    7.5.0.10     /sapdb/NW4/db
    Suse-SAP1:/ #
    Suse-SAP1:/ # dbmcli -s db_enum
    OK
    NW4     /sapdb/NW4/db   7.5.0.10        fast    running
    NW4     /sapdb/NW4/db   7.5.0.10        quick   offline
    NW4     /sapdb/NW4/db   7.5.0.10        slow    offline
    Suse-SAP1:/ # dbmcli -d NW4 -u control, aksec param_getvolsall
    Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
    Suse-SAP1:/ #
    Suse-SAP1:/ # dbmcli -d NW4 -u control,param_getvolsall
    Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
    Suse-SAP1:/ # dbmcli -d NW4 -u control, sapstar param_getvolsall
    Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
    Suse-SAP1:/ #
    Suse-SAP1:/ # xinstinfo NW4
    IndepData           : /sapdb/data
    IndepPrograms       : /sapdb/programs
    InstallationPath    : /sapdb/NW4/db
    Kernelversion       : KERNEL    7.5.0    BUILD 010-121-066-665
    Rundirectory        : /sapdb/data/wrk/NW4
    Suse-SAP1:/ #
    Best Regards and thanks for helpppp
    Very sorry, but my english is not good.
    Alejandro.

  • Error while installing developer 10g on linux suse 10.0

    Hi All,
    This error appears while installing developer 10g on linux suse 10.0
    http://img179.imageshack.us/my.php?image=errorso9.png

    Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
    Use copy&paste method (for error message) rather than link to image.
    It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

  • Installation mySAP ERP 2005 on Linux SuSe 10

    Hello,
    I tried to install mySAP ERP 2005 on Linux Suse 10 with 8 GB RAM and enough harddisk space (6 x 250 GB) as a central system. But the Installations stops always in the "Import Abap" step with jobs:
    running 3 , wating 22 , completed 13, failed 0 , total 38
    No errors are written to the logfiles and there is no progress in the installation, so I have to stop it manually.
    Can anyone help me?
    regards
    Andreas

    Hi Frank
    Can you please let me know how to get the SAP Solution manager Key that we need to type in during the initial installation?
    Thanks
    Sasi

  • System Requirement for SAP Crystal Server in Linux Suse 11

    have trouble installing CRS 2011 in linux suse 11, need help to share best system requirements to install it.
    the condition is that this server will be use for mirroring database that support oracle 10g.

    Hi Felix,
    Please re-post to the BI Platform space.
    This space is designated for CR Design issues.
    P.S: You may download the Minimum System requirements and other such docs at www.help.sap
    (Choose Analytics > Business Intelligence > Crystal Server)
    -Abhilash

  • Linux suse 10 32位 Oracle 9.2数据库ora-600-[2831], [0]

    linux suse 10 32位 Oracle 9.2数据库ora-600-[2831], [0]
    alert日志如下：
    Errors in file /opt/oracle/admin/test/bdump/test_smon_12102.trc:
    ORA-00600: internal error code, arguments: [2831], [0], [0x0], [0x0], [1], [0], [], []
    Fri Aug 24 11:12:45 2012
    Database Characterset is ZHS16GBK
    Fri Aug 24 11:12:45 2012
    ORACLE Instance test (pid = 8) - Error 600 encountered while recovering transaction (9, 32).
    Fri Aug 24 11:12:45 2012
    trace文件邮件发出
    麻烦大师帮分析下及问题如何处理，ths...

    LOG FINDING:
    /opt/oracle/admin/test/bdump/test_smon_12102.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /opt/oracle/product/10.2.0/db_1
    System name:     Linux
    Node name:     linux-u72z
    Release:     2.6.16.46-0.12-bigsmp
    Version:     #1 SMP Thu May 17 14:00:09 UTC 2007
    Machine:     i686
    Instance name: test
    Redo thread mounted by this instance: 1
    Oracle process number: 8
    Unix process pid: 12102, image: oracle@linux-u72z (SMON)
    *** SERVICE NAME:() 2012-08-24 11:12:44.788
    *** SESSION ID:(549.1) 2012-08-24 11:12:44.788
    *** 2012-08-24 11:12:44.788
    ksedmp: internal or fatal error
    ORA-00600: internal error code, arguments: [2831], [0], [0x0], [0x0], [1], [0], [], []
    ----- Call Stack Trace -----
    calling              call     entry                argument values in hex     
    location             type     point                (? means dubious value)    
    ksedst()+27          call     ksedst1()            0 ? 1 ?
    ksedmp()+557         call     ksedst()             0 ? 73000 ? B70893AC ?
                                                       C72D280 ? 3 ? 40C ?
    ksfdmp()+19          call     ksedmp()             3 ? BFDCD5B4 ? AC05B20 ?
                                                       CBC2A40 ? 3 ? CB740C8 ?
    kgeriv()+188         call     00000000             CBC2A40 ? 3 ?
    kgesiv()+118         call     kgeriv()             CBC2A40 ? CC3C8EC ? B0F ? 5 ?
                                                       BFDCD620 ?
    ksesic5()+44         call     kgesiv()             CBC2A40 ? CC3C8EC ? B0F ? 5 ?
                                                       BFDCD620 ? B0F ? 5 ?
                                                       BFDCD620 ?
    kcfonl()+220         call     ksesic5()            B0F ? 0 ? 0 ? 0 ? 2 ? 0 ?
    tbsonl()+24          call     kcfonl()             CC3E0BC ? 0 ? 0 ? 1 ?
                                                       BFDCE7BC ? BFDCDB94 ?
    kcoubk()+131         call     00000000             BFDCDCB4 ? CC3E0A0 ? 1 ? 4 ?
                                                       0 ? BFDCE270 ? BFDCE254 ?
    ktundo()+2426        call     kcoubk()             BFDCE32C ? BFDCDCB4 ?
                                                       CC3E0A0 ? 1 ? 4 ? 0 ?
                                                       BFDCE270 ? BFDCE254 ?
    ktubko()+1299        call     ktundo()             1 ? 80008C ? CC3E09C ? 24 ?
                                                       38 ? BFDCE718 ?
    kturrt()+1820        call     ktubko()             BFDCE718 ? BFDCE708 ? 4 ?
                                                       BFDCE7BC ? BFDCE5C0 ?
                                                       BFDCE700 ?
    kturec()+1832        call     kturrt()             BFDCE7BC ? 20 ? 1 ? 0 ? 11 ?
                                                       4 ? 1 ?
    kturax()+574         call     kturec()             9 ? 0 ? 1 ? 0 ? FFFF ? 11 ?
                                                       4 ?
        SO: 0xb392c810, type: 3, owner: 0xb35c491c, flag: INIT/-/-/0x00
        (call) sess: cur b38fc338, rec b38f2d98, usr b38fc338; depth: 0
          SO: 0xb392d3e0, type: 3, owner: 0xb392c810, flag: INIT/-/-/0x00
          (call) sess: cur b38f2d98, rec b38f2d98, usr b38fc338; depth: 1
          SO: 0xb38f2d98, type: 4, owner: 0xb392c810, flag: INIT/-/-/0x00
          (session) sid: 541 trans: (nil), creator: (nil), flag: (2) -/REC -/-/-/-/-/-
                    DID: 0000-0000-00000000, short-term DID: 0000-0000-00000000
                    txn branch: (nil)
                    oct: 0, prv: 0, sql: (nil), psql: (nil), user: 0/SYS
          temporary object counter: 0
          SO: 0xb39da5e0, type: 5, owner: 0xb392c810, flag: INIT/-/-/0x00
          (enqueue) TX-00090020-0000006B     DID: 0001-0008-00000003
          lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  flag: 0x6
          res: b3b571f0, mode: X, prv: b3b571f8, own: b38fc338, sess: b38fc338, proc: b35c491c10.2.0.1.0+ Linux

  • Problems deploying with SDM on SAP Netweaver Testdrive on Linux

    Hello,
    I tried to deploy the System Analyzer (see SAP-Note 770702) for NW 04 on the SAP Netweaver Testdrive on Linux (Technology Preview SAP NetWeaver 04 - SAP Web Application Server on Linux and MaxDB).
    When I try to deploy it with the RemoteGui, the GUI hangs after the step 2 ('show deployment proposals for SCAs/SDA's to be deployed'). There is no error in the logfiles.
    When I try to deploy it on the command line (standalone modus), I get the following error:
    >>>
    Caught Exception: java.lang.NullPointerException
    java.lang.NullPointerException
            at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.doSubstitution(DeplParamVarSubstProcessorImpl.java:238)
            at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.findSubstitution(DeplParamVarSubstProcessorImpl.java:75)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSet.<init>(CPOFSJavaFileSet.java:58)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSets.<init>(CPOFSJavaFileSets.java:41)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFactory.createNewFileSets(CPOFSJavaFactory.java:24)
            at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionProcessor.<init>(FSJavaDeploymentActionProcessor.java:87)
            at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionHandler.createDeploymentActionProcessor(FSJavaDeploymentActionHandler.java:25)
            at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.createDeploymentActionProcessor(PhysicalDeploymentActionExecutor.java:104)
            at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.createDeploymentActionProcessor(DeploymentActionImpl.java:102)
            at com.sap.sdm.app.proc.deployment.states.StateRequestTargets.processEvent(StateRequestTargets.java:69)
            at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
            at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
            at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.processStartInstallation(DeployerImpl.java:168)
            at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:80)
            at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:182)
            at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
            at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
            at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
            at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
            at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
            at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
            at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
            at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
            at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
            at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
            at com.sap.sdm.control.command.Command.exec(Command.java:42)
            at SDM.main(SDM.java:21)
    Severe (internal) error. Return code: 16
    <<<
    Any ideas?
    Thank's a lot
    Peter

    Hi Peter,
    Testdrive is a manipulated version that may miss some parts. It is definitely not intended for installing any additional SAP software nor tools on it.
    Regards,
    Benny

  • Libraries on Windows to Linux SuSe

    Hi everybody,
    There are a thousand forms which have 4-5 attached libraries. These libraries are located in a library directory C:\LIBS.
    I want to transfer these forms to Linux SuSe environment and libraries as well...
    Except for the compilation and save of the forms and libs , how can I alter 'massively' - if it is possible - the location of the lib directory (let's say from C:\LIBS to /opt/libs).
    I think of two ways:
    1) transforming into xml , make the neccessary modification and return back to fmb
    2) transforming into fmt , make the neccessary modification and return back to fmb (is this possible..?)
    3)which else?
    Which is the quickest way to alter the path of the forms 10.2. on Windows to Linux SuSe?
    Thanks , a lot
    Simon

    Hi Francois,
    I cannot , at least in Windows, convert the .pll files to .plx . Error FRM-91507 : Cannot create the lib and another message PDE-IIN005 : command insert is unknown appear.
    That's why i have installed the .pll into a specific library directory C:\LIBS.
    Then , imagine that i'll make the executable of the libs..
    The files(.fmb) in Linux will still have the 'wrong' path C:\LIBS in their properties , won't they..?
    Unfortunately , anyway i cannot test it right now....
    Thanks a lot for your constant support and ideas....
    Simon

  • Sapinst fails in Linux SUSE

    Hi,
    I'm completely new to Linux. Yesterday I installed a Linux Suse 10 and now I wanted to install a Netweaver 7.0 with SR3.
    I installed the Java JDK IBM 1.4.2. and seems ok because comand "java -version" works fine. 
    I have copied the master CD into a file in my Desktop.
    With the terminal I go to the location where I have the sapinst file and when I run the comand "./sapinst" I'm getting the following error
    iaextract.c:439:  Error opening archivefile /root/Desktop/sapcd/BS_2005_SR3_SAP_Installation_Master/IM_LINUX_X86_64/./sapinst
    Anyone has an idea of what could be the reason or where to look in search of clues?
    Any help appreciated and points awarded.
    Thanks,
    Alberto Sabate

    There is also another thing that I don't understand. If I execute sapinst I get the error that I meantioned earlier in the thread.
    However if I execute startinstGui.sh the SAPinst GUI windows appears and the terminal displays:
      Java Runtime found in JAVA_HOME environment variable
      Path: /usr/lib64/jvm/java/bin/java
    Start mode: gui (GUI only)
    Connection parameters:
      GUIServer host: localhost
      GUIServer port: 21212
    Starting...
    <<< frog.jar: version 5.4.5  10/19/05  sap.theme: null >>>
    Unfortunately the sapinstGUI windows also delivers the message
    Could not connect to host localhost on port 21212. java.net.ConnectException: Connection refused
    But again as I said earlier I'm completely new to Linux so most probably there is something obvious that I haven't done.

  • Linux suse 10

    Hi,
    within linux suse 10 (i586), how can I call Sqlplus?
    Regards,
    huamin

    Hi,
    It's located in your oracle_home /bin
    If you want to find it:
    find / -name sqlplus 2>/dev/null
    Regards,
    Mario Alcaide
    http://marioalcaide.wordpress.com

  • Problems Installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0)

    I have problems installing Designer 6.0 over Oracle 8i (Linux SUSE 8.0). When I try to create the repository the installation hang up. I try over Oracle 8i (WIndows 2000) and the problems remain.
    Please any body can help?
    Is it possible to install Designer 6i and generate forms 6.0 (I mean for using Developer 6.0 (NOT 6i))?
    Best regards,
    JAGC

    Marcel,
    I had the same problem. Oracle gives as an answer that Designer 6.0 is not supported against 8.1.7. In the specified package a statement is issued which is a problem for 8.1.7. I changed that package and now it works fine.
    Comment as below and replace with the delete statement, then it compiles fines.
    I don't know if any problem can occur after that, but a Migration from a 1.3.2 repository to 6i works fine through this repository. Hope this helps.
    Kind Regards
    Jan Boersma
    Email: [email protected]
    see here:
    -- Remove Reserved Names entry and comment
    -- delete from sdd_reserved_names
    -- where (rn_res_name, rn_type) in ((upper(view_name), 'VIEW')
    -- ,(upper(pack_name), 'PACKAGE')
    -- ,(upper(pack_name), 'PACKAGE BODY')
    -- ,(upper(app_view_name), 'VIEW BODY'));
    delete from sdd_reserved_names
    where ((rn_res_name = UPPER(view_name) AND rn_type = 'VIEW') OR
    (rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE') OR
    (rn_res_name = UPPER(pack_name) AND rn_type = 'PACKAGE BODY') OR
    (rn_res_name = UPPER(app_view_name) AND rn_type = 'VIEW BODY'));
    null

  • Installation - Linux Suse 9 OS Requirements

    Hi,
    I have inherited a production system, which is Oracle Application Server 10.1.2 on Linux Suse 9; the configuration includes Web Cache, Portal, OID etc.
    There have been several performance and stability issues and the deeper I look I find that many configuration settings are either wrong or none existent.
    I have also noticed that the recommended software requirements as listed above as documented in the Oracle Application Server Installation Guide were not made and these are as follows:
    1. Linux Software requirements (Linux packages)
    2. Kernel Parameters
    3. Kernel Parameter settings for OracleAS Web Cache
    4. Kernel Parameters settings for OracleAS MR
    5. Oracle User Shell Limits
    The question I have for you esteemed Oracle Professionals is will any retrospective changes have the desired stabilising effect or should I rebuild?
    Message was edited by:
    4dyomi

    I described installation of 9i R2 valid for SUSE 9.1, 9.2 and 9.3. You could find it on http://ivan.kartik.sk/oracle/install_ora9_suse.html
    Hope that helps

  • Java 2SE and Linux SuSE 8.1 Prof.

    Hi,
    What do you think about relationship as in the topic, Java 2SE on Linux SuSE 8.1, does it work?
    Regards
    Krzysztof

    I do all my development work (JFreeChart, JFreeReport) using Eclipse on SuSE 8.1 Professional (Gnome desktop). I don't have any problems with it...
    Regards,
    Dave Gilbert
    http://www.object-refinery.com

  • Linux Suse 64bits & BOXI3.1 Physical Memory

    Hi,
    These are the question.
    We have a server Linux Suse (64 bits) with 48 GB RAM and Business Objects XI 3.1 SP3 (32 Bits) the problem is that it only takes 4GB of memory instead of 48 GB
    The CMC Metrics show only 4gb.
    somebody has an idea why only takes 4gb ?
    Thank you

    Hi;
    this is not a problem, this is the way BOE XI 3 is build and delivered, so no workaround, BOBJ XI 3 is compiled as 32bits, so no way to go above this 4GB limit (even 2 on Windows), your only and recommended option is to have several instances of the servers that are actively used.
    The only process that can be switched to 64 bits, it the JVM running Tomcat, this article explains how to do it on Windows ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Quickandeasytomcat64bitsconfigurationwithBOEXI3.1onWindows64+Bits ), read it and adapt for Linux.
    For your information, starting with XI 4.0, all server binaries will be delivered as 64 bits only.
    Regards;
    Lionel

  • OBI & Linux SuSe v10

    Hello everyone,
    Can anyone tell me if there is a OBI version that supports Linux SuSe 10?
    Thank you!

    Hello everyone,
    Can anyone tell me if there is a OBI version that supports Linux SuSe 10?
    Thank you!

Maybe you are looking for

  • Custom security provider exception

    Good day, colleagues. I want to raise an old topic. I use custom security provider exceptions: -AccountExpiredException -AccountLockedException However, the login() method only captures FailedLoginException try   CallbackHandler pwcall = new weblogic

  • Page not rendering (loading) completely post deployment

    Hi, We developed a custom page and deployed it into one of our test instances. We already have more than 11 modules (all in OA Framework) successfully deployed and running on the instance till date without errors. For this page alone when I click on

  • Sudden Drop in WiFi Performance - iBook G4

    My wife's iBook G4 14" (1.1 GHz CPU) with Airport Extreme card has had great wireless performance since we've had it. About a month ago, it began having terrible reception. It used to connect fine from upstairs. Now it can only connect consistently w

  • Ubuntu, Disk, Media Kit, help me :(

    Using the disk utility, I have successfully installed Ubuntu OS on it's own 10 GB Partition(s). That's awesome and all, however, after running the installation, I wanted to install XP as well. So as I went to make another 10 GB free space on the same

  • Install fonts on iphone 4s

    I downloaded free font apps but I can't find a way to actually install them for use in texting.