NW04s 07 java sneak preview installation error

Hi,
I am getting the following error when I am trying to install NW04s 07 java Sneak preview .
ERROR 2006-09-20 00:15:09
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilRebootDrv' does not exist on the 'localhost' host.
I have the localhost entry in the hosts.ini file and turned off Norton anti virus.
Appreciate quick response
Srini Sandaka

have a look may be it helps you
Re: Netweaver 2004s ABAP Sneak Preview
Regards
Subhash

Similar Messages

NW04 Full Java Sneak Preview is shutting down!

I've just installed the Full Java Sneak Preview of NW04 SPS16 but the installation doesn't seem to be stable. After a while running the J2EE Server (jcontrol.exe) is shutting down automatically. The developer trace gives the following information:
Thr 5460] JControlICheckProcessList: process SDM started (PID:5372)
[Thr 7776] JControlMSMessageFunc: Thread 7776 started as listener thread for ms messages.
[Thr 7776] Wed Apr 19 13:46:48 2006
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] Wed Apr 19 13:48:28 2006
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] Wed Apr 19 13:48:31 2006
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] Wed Apr 19 13:49:13 2006
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 7776] Wed Apr 19 13:54:16 2006
[Thr 7776] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 7776] Wed Apr 19 13:59:52 2006
[Thr 7776] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 7776] Wed Apr 19 14:05:12 2006
[Thr 7776] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 7776] Wed Apr 19 14:10:32 2006
[Thr 7776] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 7776] Wed Apr 19 14:12:19 2006
[Thr 7776] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 7776] Wed Apr 19 14:12:20 2006
[Thr 7776] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2488]
[Thr 7776] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1652]
[Thr 7776] Wed Apr 19 14:12:23 2006
[Thr 7776] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10065: WSAEHOSTUNREACH: No route to host) [nixxi_r.cpp 8588]
[Thr 7776] *** ERROR => MsIAttachEx: NiBufConnect to U410603/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 7776] *** WARNING => Can't reconnect to message server (U410603/3601) [rc = -100]-> reconnect [jcntrms.c 295]
The last lines are repeated every 10 secs...
What is the problem here - I already checked the maxdb-log-size but this doesn't seem to be the reason because it's not at 100%?!?
Thanks in advance,
Claudio

Im using version SP16. I tried sdm and blank as password still no luck...
In below thread they mentioned how to change the SDM password in SP16..But i dont know how to change it.
Deploying NWDS apps via SDM in Sneak Preview SP16 Java Full Edition
Can anyone help me pls..'
BM
Message was edited by:
 Bharathi M

Sneak preview Installation error, file source.properties not found

Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. K

Hi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru

SAP sneak preview installation error reg MaxDB

Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte

Hi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas

WAS Sneak Preview Installation problem???

Hi,
I was successful in installing the WAS sneak preview installation from sdn.but since I had problems in using sdm password for deploying webdynpro I uninstalled the entire setup of sneak preview.
Again when I tried to install sneal preview,it is stopping at 17th phase of 28 for a long time.The phase is "Load Java Database content".Neither it is giving any error in log file nor moving forward to next step for more than 2 -3 hours.
Has anybody encountered this problem earlier?
Useful answers will be suitably rewarded.
Regards,
RK

Hi,
it could very well be that your LOG volume is filled 100%. Please check your (<drive>:\sapdb\data\wrk\<SID>\)knldiag and/or knldiag.err file for LOGFULL messages.
In order to free up log, you need to make a Log backup. Prior to your first Log backup, you need to have made a Data backup.
So, if you haven't done any of the above previously, you would need to:
1. define backupmedia for both Log and Data backups
2. perform a data backup using the data backupmedium created in step 1
3. perform a log backup using the log backupmedium created in step 1
Afterwards, you could also create an Autolog backupmedium and switch on the Autologging feature, it would save the log automatically from filling to that degree.
All done conveniently using the Database Manager GUI.
Regards,
Roland

Problem in installing SAP NetWeaver 7.0 Java sneak preview on windows xp sp

Hi
when I am trying to install SAP NetWeaver 7.0 Java sneak preview on windows xp sp2 I am getting the following problem 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Automatic LiveUpdate scheduler does not exist' after giving the jce file path and i can find the registry entry for the automatic live update scheduler .then what is wrong
Any inputs are welcome

Hello Bala,
Do you have Norton AntiVirus installed? If so then you may need to uninstall it and then proceed with installation. Simple stopping it will not work.
Regards,
Vishwas.

Loading Java Sneak Preview freezes at Load Java Database

I have tried installing the java sneak preview on two different machines and it freezes everytime at Load Java Database. I searched the form and found a similiar post with no response. Has anyone had this problem or any ideas.
1st Box was WinXp 1gig ram p42.8
2nd Box was Win2003 1gig p41.8

Agustin,
Were you able to solve your situation ?
I have the same situation, I have an ABAP NW2004s (v7.00 SP8) installed and working on my PC. I am trying to install the Java NW2004s FULL on the same PC, and after entering the location for the JCE files, the setup displays message:
Collecting information about installed SAP systems: checking SAP service SAPNSP_00...
then an error comes up, the log has the following :
ERROR 2006-11-16 15:03:13
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2006-11-16 15:03:13
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
I am installing on a PC WIn XP SP2, with 1GB of RAM, and have 16.7 GB available on the Hard Disk.
Please let me know, thanks

Netweaver7.0 Sneak preview installation

Hi All,
I am trying to install Netweaver7.0 sneak preview at my local PC. I have met all required configuration for installation. I am getting an error at step 3 , while setting OS User Passwords.
1)I have manually created two users
SAPServiceJ2E
SAP System > OS User Passwords
Default is abcd1234, ie. the master password. If the password does not match you Windows password policy (eg., 10 letters, at least on digit), installation will fail.

Hi, I can't find the forum we are supposed to use for sneak preview installation support. I'm new here, so maybe it's obvious and I'm just missing it.... Could you help us out and provide a link?
Thanks!
On edit: Okay never mind, found the link on the download page...for anyone else who is looking, here it is:
Software Downloads
Message was edited by: Margaret Hilsbos

Can I add a JAVA sneak preview to my installed ABAP trial version

Hello experts,
I have installed the ABAP sneak preview 7.01 and I need to install an SLD to it so i can register my ABAP stack to another SLD.
As i know i have to install the JAVA stack first before intalling SLD, it that right?
Is that possible to add a JAVA stack to my ABAP trial version? i can not find a JAVA sneak preview download in SDN..
Thanks a lot!
Best regards, Charlie

Hi Charlie,
It does say that you shouldn't have another SAP system installed but you can definately install two systems without a problem.
Sapinst should do it for you but make sure that you have different instance numbers and ports selected during the start of the install.
Gingle explains the process well here:
/people/glen.spalding/blog/2010/06/20/the-full-monty--part-9--the-ce2-install
Cheers
Phillip

NW04s full version Sneak Preview (java): License check failed

I've seen similar posts, but not exactly the same thing.
I installed the Sneak Preview Full Edition (Java), and finally installed it today. It shuts down after 30 minutes with an error from jcontrol.exe - the license check has failed.
It's not an expired license (I just downloaded it this week, and installed it today).
I've seen several posts related to using the Visual Administrator to manipulate licenses, but I haven't seen how to start this tool - there are no instructions I've found that are any more detailed than "start the Visual Administrator".
I feel like I'm almost getting it. Can anybody provide me that missing link?

Finally got it going properly.
I adjusted my system clock to fall between the licence dates found in Visual Administrator and restarted the system.
It didn't work.
I uninstalled the sneak preview edition,
Set the system clock to 15/Dec/2005,
Reinstalled the the sneak preview edition.
It did worked this time.
I was surprised by the licence dates in Visual Administrator.This time that the start date was set properly from 15/Dec/2005 to expire on 15/Mar/2006.
However in the first installation,the licence dates are
from Nov/05 to May/06 which is 6 months.
This time i got the licence from Dec/05 to Mar/06 which is 3 months.
I observed 2 differences between these 2 installations.
1) After my first installation, while the jcontrol.exe is still starting some processes, I tried to login to VA couple of times unsuccessfully. In my next attempt to login to VA, it asked me to change my password and I did change it from abcd1234 to something else.
When I changed my password, may be jControl.exe didn't pick it up instantly and tried to use some services using the old password which might have caused the problem.
2) In my second installation, I changed my system date to 15/Dec/2005.So.. to prevent any sort of automatic date synchronization, I've disconnected the internet connection.
This time the installation date was taken into consideration by the installer to create the licence.
It is still a mystery to me why the licence date was set to some old dates in my first install.

KM errors out on SP16 Java sneak preview

Any ideas with this one?
i have installed the full SP16 Java preview and all runs as expected, expect KM that is.
Initially post install I had to change the repository manager path for /etc to my local sapmnt share. Now I can see into the /etc directory but when I access KM Content from the Content Admin role I get red runtime messages. Furthermore in System Admin>Monitoring>KM the cache service and most of the scheduler services are red.
Has anyone else got this problem?
I have now installed the sneak preview twice both times onto clean os installs and get exactly the same symptoms. As I said everything else portal and nwa work as advertised.
Thanks in advance.

Hello,
Our main purpose is how to get workitem data with EP UWL. Then we will be able to transfer the date to webservice directly.
so the question are:
1. Will the workitem data be update into kmc_uwl_items table when creating or modification from ERP?
2. If it's not this table, how to fetch workitem data directly?
I have checked the blogs and code sample: /people/kenichi.unnai/blog/2009/10/19/how-to-use-uwl-api-for-netweaver-bpm-tasks
We can use these codes to get bpm task itsms,But we can not get WORK ITEMS FROM ERP SYSTEM even 3 or more hours later after creating some tasks.
Could anyone help me? Thanks.
San

NW2004 Sneak Preview installation

I am trying to install NW2004-SP16-Sneak-Preview on a 2 GB laptop with {Windows XP-MediaCenter Edition-Version 2002-SP2).
The installation finished successfully.The database and java instances have started successfully.
When we try to login like http://localhost:50000/irj, I get an error " 503 service unavailable
application stopped "
Details: You have requested an application that is currently stopped".
Does anyone has a solution to this issue?. is it any thing do to with the Media Center Edition?.
Any help is greatly appreciated.
Regards
Selvam

Hi Selvam,
Is the J2EE home page i.e http://localhost:50000 opening?
If yes, then probably the irj application might not be
running. Go to Visual Administrator usr/sap/.../j2ee/admin
go.bat -> server -> services -> deploy -> applications
and start the sap.com/irj application.
Regards
Srikishan

Was 640 java add in installation error 1332 - no mapping...

i am currently installing
the was 640 java add in for the was 640 abap.
i am logged in as /Sap_LocalAdmin and the installation fails.
Please check the following error messages:
INFO 2005-03-16 16:36:26
Successfully added privileges 'SeServiceLogonRight SeNetworkLogonRight SeDenyInteractiveLogonRight SeDenyRemoteInteractiveLogonRight' to account 'JDCKARLSRUHESAPServiceJXI' on host '.'.
INFO 2005-03-16 16:36:28
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'JDCKARLSRUHEjxiadm' on host '.'.
ERROR 2005-03-16 16:36:28
FSL-00001 System call failed. Error 1332 (No mapping between account names and security IDs was done.
) in execution of system call 'LookupAccountName' with parameter (NULL, jdcbwSAP_LocalAdmin, ...), line (305) in file (synxcaccmg.cpp).
ERROR 2005-03-16 16:36:28
FSH-00008 A system error occurred when executing function LookupAccountName. ErrorNo=1332
i don´t know exactly what to do now? should i edit the xml file or what can be done?
or am i wrong with my assumption, that the system´s reference to the group isn´t valid?

Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer

Was Java Add in installation error FJS 0003

Hi all
does anyone have an idea about the following problem?
I am installing Java Add In on AS/400 platform. SAPINST termitaes with error:
FJS-0003 Output is not defined.
I cannot understand what's going on.
Hints are really appreciated.
P.S. Was ABAP 6.40 is already installed on host.
F.V.

Hi,
i had the same problem too.
Actually i'm installing the "Sneak Preview SAP NetWeaver 2004 Slim Edition (Java)" on Windows 2003 DomainController. In this case the relevant settings are stored in "<Location_Of_SAPINST.EXE>\ADA\control.xml", which is being copied to "<SAPINST_INSTDIR>\j2ee_wp\installdefault\" during installation.
Before i started a new installation i searched the original "control.xml" for String "LocalAdmin".
I replaced:
'name:host + "
SAP_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_LocalAdmin"'
and
'name:host + "
SAP_" + this.getSID() + "_LocalAdmin"'
with
'name:this.getDomain() + "
SAP_" + this.getSID() + "_LocalAdmin"'
The installation is still running at the moment, but far behind that point where the error always came up.
For me it looks very good.
SAP says installation on a DC is not supported, which not means that it would be impossible.
Remember to edit the "control.xml" at it's original location BEFORE you start the installation.
Good luck,
Philipp Kammerer

GUI Hangs with JAVA sneak preview

Hello all,
I have SAP NetWeaver 2004s Java Trial Version
SP09 successfully installed on my WINXP machine.
Everything is good exept GUI. I cannot be able to use any GUI neither SAP GUI nor JAVA GUI (700). In both cases it hangs without any errors when I try to logon.
J2EE engine is working properly - portal, VC and so on...
May be I have to do something else? Please help me with it.
Regards,
Max

there is sneak preview ABAP engine available whichyou can download and use it forBW and integrated planning.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/webcontent/uuid/b2918eea-0601-0010-6284-e6cb7eee4399 [original link is broken]
Regards
Raja

NW04s 07 java sneak preview installation error

Similar Messages

Maybe you are looking for