NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work

Hi,
We went live with SPS 7/FEP 7 and we are having problem in 3.X Bex Analyzer with "Select Filter Value" for charcteristic having active hierarchy(in this case it is using time dependent hierarchy). (For Eg: Organization Unit)
If I inactivate the hierarchy for organization unit at query level and then execute the query, then "select filter value" works for Organization Unit.
NOTE: I checked other query using hierarchy (not time dependent hierarchy) and I was able to do "select filter value"
Please let me know if any OSS note is available for this issue so that we can fix this issue in our Production Environment.
NOTE: The above issue works in SPS 8/FEP 802 with 3.X Bex Analyzer.
Thankyou,
-Sini
Message was edited by: Sini Kumar

Hi,
Did you have an asnwer to your problem?
We've a similar problem we had a technical upgrade to BI 7.0. But we still work with the frond end tools of 3.5.
When we select in the Bex analyzer a node in an hierarchy it shows the result, but if want to select an other node we must first remove the old filter. This wasn't when we're on the 3.5 enviroment.
Maybe if the problem is solved, this can help us.
Thanks in advance!
Regards,
Juriaan

Similar Messages

Select Filter value for Hierarchy node taking long time

Dear Experts,
I am facing an issue with the Filter value selection in a BEx query and searched the forum for a solution but found none.
I have a free characteristic with hierarchy enabled for it and the Filter value selection at Query execution has been set to 'Values in Master data table' in the query definition and in the Multiprovider as well.
However, whenever the filter value selection is performed, the values are being read from teh underlying infocubes instead of the Master data.
We tried checking the BIA Index for the cube as well as the InfoObject and all is fine.
Can someone please point what might be going wrong here.
Thanks & Regards,
Sonal

Could you please check as per Note 1565809 and make sure the F4 mode is really M mode in each level settings?

Problem with Select Filter value.......

HI all
We have created a report on Sales cube,and Inserted the Report into work book.
In the report we have 2 Commission codes 1.Customer,2.material.
   when we are trying to select filter values for customer Commission code,we are Gatting the Pop-up window but the system is Getting hanged, it is not showing any values also.
   We thought it is a Bex problem, but when tried other reports it is working fine.
   Suggest me any possible solution to resolve the issue
Thanks in advance

Little more improvement
After deleting and re creating the indexes, the Filter values are comming but it is taking almost 10-12 min to display the values.

WebAn: select filter value on 0plant gives error (but works fine for other)

Hi all,
have something strange in the web analyzer:
i have a query with 0plant in the free characteristics
when I do 'select filter value' when it's in the free characteristics -> dump
when 0plant is in the rows and I do 'select filter value' -> dump
when I do 'select filter value' on 0customer that is in the free characteristics -> works fine
In the BEx Analyzer it works fine...
Anybody an idea?
Ciao
Joke
the strange world of BI...

Hello,
Is it a 7.0 system? maybe the RSTT trace as per note 899572 can give you more information about this error.
Thanks,
Ricardo

POSDM - filter value for category code determination

Hi Guru's
Pl advice on significance of setting the filter value for Category Code Determination in POSDM config under /posdw/img -> general settings.
If my inbound tlog contains all the relevant POS transaction type codes , which have been defined in config then probably :
- I do not need to give any filter value for Category Code Determination
- I do not need to maintain any definition and assignment entries under posdw/img -> Integration with Other SAP Components -> SAP POS -> Definition of Values for Category Code Criteria AND Assignment of Category Code Criteria to PIPE Category Codes
Please advice.....
thanks!!

Hi,
Select new entries and give 2 digit numeric value in sequence in tax field. it is taking only numeric values.
It might be helps to u.
Regards
Sasikanth.Ch

Filter Value for BADI

Hi,
Kindly Let me know the Filter Defined for Implementaing
BADI.
Hoping for your Response...!!!

Hi,
BADI may be implemented depending on a specific filter value( example COUNTRY-SPECIFIC VERSIONS: distinct implementations of the BADI can be created for the COUNTRY).
a filter type must be entered when defining your enhancement ( a country or industry, for example).
all methods created in the enhancement's interface have filter value 'FLT_VAL' as their import parameter.
the method then selects the active implemetation based on the data provided in the filter value.
for seting the filter value, you must enable the option FILTER DEPEND and provide FILTER TYPE in the ATTRIBUTES of the BADI defination.
SE18 is the transaction code for creating BADI.
Filter dependence for BADI definitions means that each interface method automatically has an importing parameter FLT_VAL assigned ot it. This parameter must be filled with a filter value as current parameter when it is called.
A BADI definition should be marked as filter-dependent whenever the characteristic of the BADI implementation should match the characteristics of the filter type - that is, whenever the implementation of different filter values should be different or should only exist at all for certain filter values.
Typical filter types are line of industry or country.
The BADI is filter dependent. In the first tab of your BADI implementation (SE19), the lower half will contain filter details.
STEPS FOR SETTING UP A FILTER
just go to se18 and give ur BADI name..
then Select 'Attributes' Tab ,there u will find option Filter-Dependent in window named "type"..
check tht filter dependent checkbox and give ur data element/field in the Filter type field say u can give 'MOLGA' ..save and come back..
now go to se19 and implement this BADi and there u can give filter values for filed MOLGA..
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Select Filter Value

This is an on-going performance issue that I am bogged down with. The best idea would definitely get 10 points and all the other great ideas will be well rewarded for sure! Please help...
The reports on our system run very slow (15 minutes on the average) though our cube has just about 10 million records. What bothers the user the most is that even when they go for "select filter value" on any of the "free characteristics", it takes 10 lazy minutes for the selection screen to show up. We have indices created on the master data and the SAP indices on the Cube dimensions are supposed to be good enough for faster query/selection screen retreival especially when the number of records are just 10 million. RSRV test came out to be fine on DB and cube indices. Any great ideas to improve the time it takes to bring up the selection screen?
Regarding the general query performance, we already have query cache and several aggregates in place. We use BEx, so how effective are the reporting agents on top of these? Please provide some knowledgeable comments to improve the general query performace as well.

The Select Filter Value time almost certainly has to do with the F4 options you have set for those InfoObjects. You can change this for the the InfoObject, or change the setting just for the cube using the Structure Specifc Settings.
Depending on the setting, using F4 for an InfoObject may simply read the Master Data, or it actually interrogates the the master data and the cube to see what values exist, or actually looks to see what values would be available given all the other query criteria. So as you can imagine, the response time of the options can vary a lot.
As far as query performance in general, try searching this forum, you'll find lots of threads. Also try SDN's Performance Tuning Knowledge Center.
I'm assuming you regularly compress the cube(s). Have you verified the aggregates are being used most of the time and confirmed the the value of the aggregate by comparing explain plans.
A lot of issues may relate back to the data model you are using. You can look at adding secondary indices on some of the dimension tables of you have some large dimensions that get receive full table scans because the BW system built index does not relate well to the query restrictions that are actually used.
Pizzaman

Select filter value..not opening..query hanging

Hi,
I have a queary and it is executing fine. After executing it is displaying data fine. I have company code and two more characterstics in free characterstics section. After executing the report i am doing right click at company code in the excel sheet and selecting the option 'select filter value'. It is then opening the small screen 'selection for company code' but it is not displaying the values. It's keep on running and after some time it is hanging (not responding).
In the company code object hardly there are 60 values. Can anyone tell me why this is taking long time and result in hanging for just 60 values?
This company code object is Authorisation relevant checked in the 'Business Explorer' tab. There is a variable used for this comopany code in the query design and this variable is processed by authorisation. But i dont think this is the reason for the issue. If this is the reason could you please tell me how it effects? Please suggest me the solution.
Many Thanks in advance
K
Edited by: kirankumar chandaluri on Jun 17, 2008 5:38 PM

Hi MA,
Thanks for your immedieate reply.
In the business explorer tab for which one you are asking to change the settings?
Is it for   'query def. filter value selection'
                          OR
             'query execution filter value selection'?
The current status is:
Query Def. filter value selection is 'values in Master data table'                 &
Query Execution filter value selection is 'only posted values for navigation'.
This is not cube but this is ODS. For ODS where do we set DB specfic settings?
Thanks in advance
Kiran

Values missing in Navigation block - Select filter value

Hi Experts,
I'm using navigation attribute in query. Query is built over multiprovider. Navigation attribute in query is ZCOMPAN01__ZSALES_RG. In multiprovider I use two cubes as sources and from first cube I assigned nav. attribute ZCOMPAN01__ZSALES_RG and from second cube I assigned SCUSTSAL1__ZSALES_RG.
When I click in query on funnel to Select filter value I don't see all values which are displayed in query (I see only values from first cube). But when I write the value directly to filter, it is regulary selected. Also I can right click on value in query and set Select filter value, after that I see in filter block all values (from both cubes).
I tried to change all possible Business Explorer setting of infoobject ZSALES_RG (eg. Only values in infoprovider/ only posted...etc.). I also tried to change setting of navigation attribute (right click on nav. attribute in multiprovider - Provider-Specific Properties), but without success. SID table of infoobject contains all values which I need.
Do you have any hint how to see all used values in Select filter value?
Thanks in advance
David

Hi Murali,
Thank you for the response but we know how to set the value, the option is checked and the Select Filter Value still does not show on the context menu during execution. I think the issue is related to a default user exit variable that we use to pre-select a date but still want to be able to navigate and filter other characteristics during execution. There seems to be something to this combination that BW does not like.
Thanks again,
Rick

Selecting filter value doesn't work

Hi guys,
I've a random problem on some bex query when I try to slect filter value on navigable info object of the query.
The problem is that I can't select filter value because of the message:
<b><Install error> Missing ActiveX component: Business Expolrer Selektor</b>
Have you never had this kind of problem? Somebody knows how i can solve it.
Thank you,
Marco

See the below discussion forum
Error when starting Bex analyzer
Hope it will be useful.
Regs
Gopi
Assign points if it helps ..
Message was edited by: Gopi

How to select XML value for a namespace when multiple namespaces

Hi,
I'm a beginner with this, but I'm doing well with your help from this forum in a recent post selecting out all the detail from my xml
out into my oracle relational tables. Stumped, though, on how to select a value for xml tag value referenced by a defined namespace.
Version, XML, what I want to select, and attempted sql is below. Thanks in advance!
select * from V$VERSION
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Solaris: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
drop table TRANSCRIPT;
create table TRANSCRIPT (
CONTENT xmltype
<?xml version="1.0" encoding="UTF-8"?>
<arb:AcademicRecordBatch xmlns:arb="urn:org:pesc:message:AcademicRecordBatch:v1.0.0">
<hst:HighSchoolTranscript xmlns:hst="urn:org:pesc:message:HighSchoolTranscript:v1.0.0" xmlns:ct="http://ct.transcriptcenter.com">
   <TransmissionData>
      <DocumentID>2013-01-02T09:06:15|D123456789</DocumentID>
   </TransmissionData>
   <Student>
            <Person>
                <Name>
                    <FirstName>John</FirstName>
                    <LastName>Doe</LastName>
                </Name>
            </Person>
            <AcademicRecord>
                <AcademicSession>
                    <Course>
                        <CourseTitle>KEYBOARD 101</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010456</NCESCode>
                             <CourseRigor>1</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                    <Course>
                        <CourseTitle>SCIENCE 101</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010457</NCESCode>
                             <CourseRigor>2</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                </AcademicSession>
                <AcademicSession>
                    <Course>
                        <CourseTitle>MATH 201</CourseTitle>
                        <UserDefinedExtensions>
                          <ct:TranscriptExtensions>
                             <NCESCode>01001E010458</NCESCode>
                             <CourseRigor>2</CourseRigor>
                          </ct:TranscriptExtensions>
                      </UserDefinedExtensions>
                    </Course>
                </AcademicSession>
         </AcademicRecord>
   </Student>
</hst:HighSchoolTranscript>
</arb:AcademicRecordBatch>I want to be able to select the NESCODE associated to each coursetitle (01001E010456, 01001E010457, 01001E010458), with NESCode defined by namespace, but getting out NULL.
DOCUMENTID     LASTNAME     COURSETITLE     NCESCODE
2013-01-02T09:06:15|D123456789     Doe     KEYBOARD 101
2013-01-02T09:06:15|D123456789     Doe     SCIENCE 101
2013-01-02T09:06:15|D123456789     Doe     MATH 201
My SQL is below. You'll see where I commented out a couple failed alternatives too. Thanks again in advance for any guidance.
   select x0.DocumentID
         ,x1.LastName
         , x3.CourseTitle
         ,x3.NCESCode
from TRANSCRIPT t
     , xmltable(
         xmlnamespaces(
           'urn:org:pesc:message:AcademicRecordBatch:v1.0.0' as "ns0"
         , 'urn:org:pesc:message:HighSchoolTranscript:v1.0.0' as "ns1"
        --, 'http://ct.transcriptcenter.com'                               as "ns1b"
      , '/ns0:AcademicRecordBatch/ns1:HighSchoolTranscript'
        passing t.content
        columns DocumentID       varchar2(40) path 'TransmissionData/DocumentID'
                   , Student xmltype      path 'Student'
      ) x0
   , xmltable(
        '/Student'
        passing x0.Student
        columns LastName varchar2(20) path 'Person/Name/LastName'
                    ,AcademicRecord   xmltype      path 'AcademicRecord'
      ) x1
   , xmltable(
        '/AcademicRecord/AcademicSession'
        passing x1.AcademicRecord
        columns GradeLevel varchar2(20) path 'StudentLevel/StudentLevelCode'
              , Courses      xmltype      path 'Course'
      ) x2
          , xmltable(
          xmlnamespaces('http://ct.transcriptcenter.com' as "ns2b")
          , '/Course'
        passing x2.Courses
        columns CourseTitle varchar2(40) path 'CourseTitle'
                     ,NCESCode varchar2(20) path 'UserDefinedExtensions/ns2b:ct/NCESCode'
                     --,NCESCode varchar2(20) path 'UserDefinedExtensions/ns2b:ct/TranscriptExtensions/NCESCode'
      ) x3


<<I'm assuming there is more to your XML than you showed, since
StudentLevel/StudentLevelCode
is not in the XML, but is in your query. >>
Yes, to simplify, I left out some of the additional XML data, which is typically present, sorry for any confusion. I should have removed those references to that data in my example which was failing to retrieve the NCESCode data which was denoted by that namespace.
Thank you very much! Your correction worked. I was not understanding until your correction how to properly reference in the XPATH for that namespace value. I'm a newbie at this, and this is my second post. But I've been able to populate quite a few relational tables and that was the first of several namespace tags I will have to deal with next, and with that help, I should be good with that syntax now.
Thanks again for your help on this.

Select filter value error...

hello,
In BEx, i cant activate the feature "Select Filter Value". In my web template, i've already set "Always Display" and still nothing happens. Can someone please advice? If i run this report in Query designer, it works fine.

Hello,
We are experiencing the same issue as described. In the definition of the web template the option to display the Select Filter Values is selected but in the execution of the web template the option is not available. Was a resolution over found?
Thanks,
RB74

When i select an event for move to trash, it doesn't appear in the trash to be emptied. where is it?

I have iMovie 10.0.4. When I select an event for 'move to trash' it doesn't appear in the trash to be emptied there. Where is it?

Thanks for the reply, have checked and that seems to be the problem, I have plugged in my ipad and the missing app has appeared.

Payed for subscription, but Muse CC doesn't work, it asks me serial number

payed for subscription, but Muse CC doesn't work, it asks me serial number, any help?

Hi,
Depending on your OS, please try the steps below
Windows
Click on the "Start" menu. Select "All Programs" and then "Accessories"
Right-click on "Notepad" and select "Run as Administrator"
Click "Continue" on the "Windows needs your permission" dialog
When Notepad opens, click File and select Open
In the filename field type the following:
C:\Windows\System32\Drivers\etc\hosts
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
From the "File" menu select "Save" after making changes
Restart Muse
Macintosh
Click on the "Finder" icon. Select the "Applications" folder
Open the "Utilities" folder and select "Terminal"
Type the following:
sudo nano /etc/hosts
Enter the OS user's associated password when prompted
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
Press control+o to save the file
Press control+x to close the file
Restart Muse
Let me know the result

Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

Both Chrome and Safari interrupt online streaming to request/demand an update for a PC program that doesn't work on Macs. What is going on?

The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions.

NW04s(SP7/FEP7)-Select Filter value for HIER in 3.XBexAnalyzer doesn't work

Similar Messages

Maybe you are looking for