NW2004 Installation - MaxDB error
Hi,
I am using win xp prof(SP2)laptop system and trying to install ABAP NW2004s. I keep getting below error message.
I did follow the guidelines as mentioned in the document.
But stuck at 17 of 24 phase(Import ABAP) with below message heading as "Reload.exe - Unable to Locate Component"
with error message as below:
"This application has failed to start because libSQLDBC76.dll was not found. Re-installing the application may fix this problem".
Did anyone experience the same problem. Please share your solution/workaround with me.
thanks,
partha
Hello Partha,
As of NW 2004s, the new MaxDB DBSL (dbsdbslib) and therefore the
disp+work uses the Library libSQLDBC76 of the MAXDB 7.6.00 installation
client.
The Reload tool can't find the libSQLDBC76.dll which needed to connect
to a 7.6 MaxDB database.
(The MaxDB client on application servers must always be on the same
major release version as the database server)
Please update with the following information:
1) Run the command
sdbverify
if you have the packages are marked as corrupted.
2) What is output of the 'sdbregview -l' command?
3) When you will run 'xinstinfo' you will get <IndepPrograms>.
If you installed the MAXDB version 7.6, please check libSQLDBC76.dll
in the directory <IndepPrograms>\pgm.
Please check that the PATH variable was adjusted by <IndepPrograms>\pgm
& <IndepPrograms>\bin.
4) Run the command
DBUPDATE.BAT -client
from the MaxDB RDBMS CD to update the Client software
Or
Using the SDBINST tool, proceed as follows to install the client
software < as administrator > with the following options:
SDBINST -profile "Runtime For SAP AS"
from the directory where you unpacked the MAXDB SAR file.
( Please run with 'SDBINST -l' to review the existing profiles & packagenames. )
5) The xuser data have the correct user/pwd/server/database name
information from the connected to the <SID> system database.
As you know, as of Version 7.5, you must only maintain correctly the Xuser
entries for the users <sid>adm (UNIX/Windows) and SAPService<sid> (Windows only).
You could find more information about xuser tool:
Run command 'xuser -h'.
At link - MaxDB documentation: http://dev.mysql.com/doc/maxdb/
MaxDB Library -> Tools -> Utilities -> XUSER
Thank you & best regards, Natalia Khlopina
Similar Messages
-
In linux install ECC6 + MAXDB error, please look at the help, thank you
This is the log file sapinst.log the last few lines
INFO 2008-12-03 07:22:54.106
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:22:54.295
State of instance QD1/DVEBMGS00 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-12-03 07:23:24.346
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.347
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.349
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.349
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-03 07:23:24.512
State of instance QD1/DVEBMGS00 changed from ABAP: STARTING to ABAP: STARTING.
WARNING[E] 2008-12-03 07:23:24.545
CJS-30105 Instance QD1/DVEBMGS00 reached state UNKNOWN after having state STARTING. Giving up.
ERROR 2008-12-03 07:23:24.875
*FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind
|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .*
I used LINUX is a bit X86-64
The database is MAXDB 7. 6. 03
SAP is ECC6 SR3
JAVA version is IBMJAVA 1. 4. 2_10
In installing the system, the need to upgrade some of the RPM package
SAP and then set up the necessary environment variables and parameters
Next to start the installation MAXDB, until the installation is complete, very smooth.
Finally, start the installation to install ECC6 in error when START INSTANCE
Who can help me take a look, thank youSystem: linux-x86_64bit
MAXDB version: 7.6.03
JAVA version: IBMJAVA 1.4.2_10
I first installed the system LINUX, and then set variables and parameters, followed by the installation of JAVA, set the environment variable JAVA. Finally, start the installation ECC6 SR3, ECC6 SID and MAXDB SID I became a full set QD3, a very smooth start the installation until the START INSTANCE this step, the system error
The following is a log error
sapinst.log
INFO 2008-12-05 01:15:10.553
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.748
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.749
Disconnect from message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.751
Connect to message server (SAPSH/3900) succeeded.
INFO 2008-12-05 01:15:40.751
Disconnect from message server (SAPSH/3900) succeeded.
WARNING[E] 2008-12-05 01:15:40.922
CJS-30149 ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
ERROR 2008-12-05 01:15:41.232
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11
|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
sapinst_dev.log
TRACE 2008-12-05 01:15:40.910
NWException thrown: nw.progress.waitingForStartABAPFailed:
ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
TRACE 2008-12-05 01:15:40.922
Function setMessageIdOfExceptionMessage: nw.progress.waitingForStartABAPFailed
WARNING[E] 2008-12-05 01:15:40.922
CJSlibModule::writeError_impl()
CJS-30149 ABAP processes of instance QD3/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
TRACE 2008-12-05 01:15:40.937 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2008-12-05 01:15:41.023 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 18724
TRACE 2008-12-05 01:15:41.119 [syuxctask.cpp:1382]
CSyTaskImpl::start(bool)
A child process has been started. Pid = 18725
ERROR 2008-12-05 01:15:41.232 [sixxcstepexecute.cpp:951]
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11
|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
TRACE 2008-12-05 01:15:41.246 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > MaxDB > Central System > Central System. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS. </p> </body></html>
TRACE 2008-12-05 01:15:41.246 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
I had to see dev_disp, dev_rd, dev_w0 this document 3 inside information without warning or error message
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid QD3
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 18637
Fri Dec 5 01:05:16 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 18637) [dpxxdisp.c 1243]
shared lib "dw_xml.so" version 144 successfully loaded
shared lib "dw_xtc.so" version 144 successfully loaded
shared lib "dw_stl.so" version 144 successfully loaded
shared lib "dw_gui.so" version 144 successfully loaded
shared lib "dw_mdm.so" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Dec 5 01:05:17 2008
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPSH_QD3_00 <
DpShMCreate: sizeof(wp_adm) 25160 (1480)
DpShMCreate: sizeof(tm_adm) 5748600 (28600)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x7f3bb0384000, size: 6446000)
DpShMCreate: allocated sys_adm at 0x7f3bb0384000
DpShMCreate: allocated wp_adm at 0x7f3bb03861b8
DpShMCreate: allocated tm_adm_list at 0x7f3bb038c400
DpShMCreate: allocated tm_adm at 0x7f3bb038c460
DpShMCreate: allocated wp_ca_adm at 0x7f3bb0907bd8
DpShMCreate: allocated appc_ca_adm at 0x7f3bb090ec58
DpShMCreate: allocated comm_adm at 0x7f3bb09111d8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x7f3bb0996eb8
DpShMCreate: allocated gw_adm at 0x7f3bb0996f38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x7f3bb0996f68
DpShMCreate: allocated wall_adm at 0x7f3bb0996f70
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation map
<EsMap> EsMapUnamFileMapInit: Initialize the memory 1968 MB
Linux: Kernel supports shared memory disclaiming
Linux: using madvise(<pointer>, <size>, 9).
Linux: disclaiming for shared memory enabled
<ES> 491 blocks reserved for free list.
ES initialized.
Fri Dec 5 01:07:17 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( SAPSH) [dpxxdisp.c 11822]
DP_FATAL_ERROR => DpMsAttach: local hostname 'SAPSH' is resolved to loopback address (cf. SAP note 1054467 for details)
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(18646,0) successful -> process alive
killing W0-18646 (SIGUSR2)
kill(18647,0) successful -> process alive
killing W1-18647 (SIGUSR2)
kill(18648,0) successful -> process alive
killing W2-18648 (SIGUSR2)
kill(18696,0) successful -> process alive
killing W3-18696 (SIGUSR2)
kill(18698,0) successful -> process alive
killing W4-18698 (SIGUSR2)
kill(18711,0) successful -> process alive
killing W5-18711 (SIGUSR2)
kill(18712,0) successful -> process alive
killing W6-18712 (SIGUSR2)
kill(18713,0) successful -> process alive
killing W7-18713 (SIGUSR2)
kill(18715,0) successful -> process alive
killing W8-18715 (SIGUSR2)
kill(18716,0) successful -> process alive
killing W9-18716 (SIGUSR2)
kill(18717,0) successful -> process alive
killing W10-18717 (SIGUSR2)
kill(18718,0) successful -> process alive
killing W11-18718 (SIGUSR2)
kill(18719,0) successful -> process alive
killing W12-18719 (SIGUSR2)
kill(18720,0) successful -> process alive
killing W13-18720 (SIGUSR2)
kill(18721,0) successful -> process alive
killing W14-18721 (SIGUSR2)
kill(18722,0) successful -> process alive
killing W15-18722 (SIGUSR2)
kill(18723,0) successful -> process alive
killing W16-18723 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:27 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Dec 4 17:07:27 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 18646 Run no 0 0 0
1 DIA 18647 Run no 0 0 0
2 DIA 18648 Run no 0 0 0
3 DIA 18696 Run no 0 0 0
4 DIA 18698 Run no 0 0 0
5 DIA 18711 Run no 0 0 0
6 DIA 18712 Run no 0 0 0
7 DIA 18713 Run no 0 0 0
8 DIA 18715 Run no 0 0 0
9 DIA 18716 Run no 0 0 0
10 UPD 18717 Run no 0 0 0
11 ENQ 18718 Run no 0 0 0
12 BTC 18719 Run no 0 0 0
13 BTC 18720 Run no 0 0 0
14 BTC 18721 Run no 0 0 0
15 SPO 18722 Run no 0 0 0
16 UP2 18723 Run no 0 0 0
Dispatcher Queue Statistics Thu Dec 4 17:07:27 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
4
4
2000
4
0
--------++++--
+
DIA
1
1
2000
1
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 5
wake_evt_udp_now 1
wake events total 5, udp 1 ( 20%), shm 4 ( 80%)
since last update total 5, udp 1 ( 20%), shm 4 ( 80%)
Dump of tm_adm structure: Thu Dec 4 17:07:27 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Dec 4 17:07:27 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:32 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPSH_QD3_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_OFF
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 1/4096 done
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
Stop work processes
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:33 2008
NiISelect: TIMEOUT occured (1000ms)
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:34 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:35 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) successful -> process alive
kill(18647,0) successful -> process alive
kill(18648,0) successful -> process alive
kill(18696,0) successful -> process alive
kill(18698,0) successful -> process alive
kill(18711,0) successful -> process alive
kill(18712,0) successful -> process alive
kill(18713,0) successful -> process alive
kill(18715,0) successful -> process alive
kill(18716,0) successful -> process alive
kill(18717,0) successful -> process alive
kill(18718,0) successful -> process alive
kill(18719,0) successful -> process alive
kill(18720,0) successful -> process alive
kill(18721,0) successful -> process alive
kill(18722,0) successful -> process alive
kill(18723,0) successful -> process alive
wait for end of exclusive shutdown
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:38 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18646,0) -> ESRCH: process died
kill(18647,0) -> ESRCH: process died
kill(18648,0) -> ESRCH: process died
kill(18696,0) -> ESRCH: process died
kill(18698,0) -> ESRCH: process died
kill(18711,0) -> ESRCH: process died
kill(18712,0) -> ESRCH: process died
kill(18713,0) -> ESRCH: process died
kill(18715,0) -> ESRCH: process died
kill(18716,0) -> ESRCH: process died
kill(18717,0) -> ESRCH: process died
kill(18718,0) -> ESRCH: process died
kill(18719,0) -> ESRCH: process died
kill(18720,0) -> ESRCH: process died
kill(18721,0) -> ESRCH: process died
kill(18722,0) -> ESRCH: process died
kill(18723,0) -> ESRCH: process died
Stop gateway
killing proc (18644) (SOFT_KILL)
Stop icman
killing proc (18645) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
kill(18646,0) -> ESRCH: process died
kill(18647,0) -> ESRCH: process died
kill(18648,0) -> ESRCH: process died
kill(18696,0) -> ESRCH: process died
kill(18698,0) -> ESRCH: process died
kill(18711,0) -> ESRCH: process died
kill(18712,0) -> ESRCH: process died
kill(18713,0) -> ESRCH: process died
kill(18715,0) -> ESRCH: process died
kill(18716,0) -> ESRCH: process died
kill(18717,0) -> ESRCH: process died
kill(18718,0) -> ESRCH: process died
kill(18719,0) -> ESRCH: process died
kill(18720,0) -> ESRCH: process died
kill(18721,0) -> ESRCH: process died
kill(18722,0) -> ESRCH: process died
kill(18723,0) -> ESRCH: process died
wait for end of gateway
kill(18644,0) successful -> process alive
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:39 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18644,0) -> ESRCH: process died
wait for end of icman
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:40 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:41 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:42 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:43 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:44 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:45 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:46 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:47 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:48 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:49 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) successful -> process alive
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Dec 5 01:07:50 2008
NiISelect: TIMEOUT occured (1000ms)
kill(18645,0) -> ESRCH: process died
DpStartStopMsg: send stop message (myname is >SAPSH_QD3_00 <)
NiIMyHostName: hostname = 'SAPSH'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
MsIBufAlloc: allocated buffer
NiIRead: hdl 2 received data (rcd=458,pac=1,MESG_IO)
NiBufIIn: NIBUF len=458
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 458 bytes
MSG received, len 110+348, flag 4, from SAPSH_QD3_00 , typ 0, key FFFFFFFF00000000
DpHalt: received 348 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Fri Dec 5 01:07:51 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelPSet: set events of sock 11 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelPRemove: removed last sock 11 (pos=3)
NiSelIRemove: removed hdl 2
NiICloseHandle: shutdown and close hdl 2 / sock 11
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EsCleanup destroy slot 0
<EsMap: unlink /SAP_ES_00_000
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
ShmCreate( 76, 0, 2, 0x0x5425b70 )
ShmKeyPermission( 76 ) = 0740 (octal)
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 1, 3 )
ShmProtect( key 1 valid )
ShmProtect( slot Index 0 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 1 prot 3/0 done
ShmCreate( 1, 0, 2, -> 0x0x7f3bbb3c5000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0x7fffc33c4cc0 )
Fri Dec 5 01:07:52 2008
ShmProtect( 2, 3 )
ShmProtect( key 2 valid )
ShmProtect( slot Index 1 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 2 prot 3/0 done
ShmCreate( 2, 0, 2, -> 0x0x7f3bb0384000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 3, 3 )
ShmProtect( key 3 valid )
ShmProtect( slot Index 2 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 3 prot 3/0 done
ShmCreate( 3, 0, 2, -> 0x0x7f3baf70f000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmProtect( 4, 3 )
ShmProtect( key 4 valid )
ShmProtect( slot Index 3 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 4 prot 3/0 done
ShmCreate( 4, 0, 2, -> 0x0x7f3bb091f000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 14, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 14, 0, 2, -> 0x0x7f3bb1426000 )
ShmProtect( 14, 3 )
ShmProtect( key 14 valid )
ShmProtect( slot Index 13 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmProtect( key 14 valid )
ShmProtect( slot Index 13 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 13 )
ShmCreate( 14, 0, 2, -> 0x0x7f3bb1426000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 11, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 11, 0, 2, -> 0x0x7f3bb5bfa000 )
ShmProtect( 11, 3 )
ShmProtect( key 11 valid )
ShmProtect( slot Index 10 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmProtect( key 11 valid )
ShmProtect( slot Index 10 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 10 )
ShmCreate( 11, 0, 2, -> 0x0x7f3bb5bfa000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmProtect( 19, 3 )
ShmProtect( key 19 valid )
ShmProtect( slot Index 18 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 19 prot 3/0 done
ShmCreate( 19, 0, 2, -> 0x0x7f3bab855000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmProtect( 33, 3 )
ShmProtect( key 33 valid )
ShmProtect( slot Index 32 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 33 prot 3/0 done
ShmCreate( 33, 0, 2, -> 0x0x7f3baffe6000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmProtect( 41, 3 )
ShmProtect( key 41 valid )
ShmProtect( slot Index 40 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 41 prot 3/0 done
ShmCreate( 41, 0, 2, -> 0x0x7f3baaee7000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 42, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmProtect( 40, 3 )
ShmProtect( key 40 valid )
ShmProtect( slot Index 39 )
ShmProtect( Mode: 112000000 )
ShmCreate( 40, 0, 2, -> 0x0x7f3a9e6f1000 )
ShmGet( 40, 42, 0, 2, -> 0x0x7f3aa1057000 )
ShmProtect( 42, 3 )
ShmProtect( key 42 valid )
ShmProtect( slot Index 41 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmProtect( key 42 valid )
ShmProtect( slot Index 41 )
ShmProtect( Mode: -40 )
ShmProtect( SegSlotIdx: 41 )
ShmCreate( 42, 0, 2, -> 0x0x7f3aa1057000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 43, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 45, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 44, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmCleanup( 54 )
ShmCreate( 54, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 54 ) = 0740 (octal)
ShmProtect( 54, 3 )
ShmProtect( key 54 valid )
ShmProtect( slot Index 53 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 54 prot 3/0 done
ShmCreate( 54, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_DB_SYNC
ShmCleanup( 46 )
ShmCreate( 46, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 46, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_CUA_BUFFER
ShmCleanup( 47 )
ShmCreate( 47, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 40, 47, 0, 2, 0x0x7fffc33c4bd8 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c46f8 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OTR_BUFFER
ShmCleanup( 64 )
ShmCreate( 64, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 64 ) = 0740 (octal)
ShmProtect( 64, 3 )
ShmProtect( key 64 valid )
ShmProtect( slot Index 63 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 64 prot 3/0 done
ShmCreate( 64, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_DB_ESM_BUFFER
ShmCleanup( 65 )
ShmCreate( 65, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 65 ) = 0740 (octal)
ShmProtect( 65, 3 )
ShmProtect( key 65 valid )
ShmProtect( slot Index 64 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 65 prot 3/0 done
ShmCreate( 65, 0, 2, -> 0x0x7f3bb05a9000 )
ShmCleanup SHM_ROLL_AREA_KEY
ShmCleanup( 9 )
ShmCreate( 9, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 9 ) = 0740 (octal)
ShmProtect( 9, 3 )
ShmProtect( key 9 valid )
ShmProtect( slot Index 8 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 9 prot 3/0 done
ShmCreate( 9, 0, 2, -> 0x0x7f3a80899000 )
ShmCleanup SHM_PAGING_AREA_KEY
ShmCleanup( 8 )
ShmCreate( 8, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 8 ) = 0740 (octal)
ShmProtect( 8, 3 )
ShmProtect( key 8 valid )
ShmProtect( slot Index 7 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 8 prot 3/0 done
ShmCreate( 8, 0, 2, -> 0x0x7f3a951c1000 )
ShmCleanup SHM_ROLL_ADM_KEY
ShmCleanup( 17 )
ShmCreate( 17, 0, 2, 0x0x7fffc33c4cc0 )
ShmGet( 10, 17, 0, 2, 0x0x7fffc33c4bd8 )
ShmGet( 10, 17, 0, 2, -> 0x0x7f3bb185a000 )
ShmProtect( 17, 3 )
ShmProtect( key 17 valid )
ShmProtect( slot Index 16 )
ShmProtect: Key=17 not attached
ShmProtect( 17, 3 )
ShmProtect( key 17 valid )
ShmProtect( slot Index 16 )
ShmProtect( Mode: -10 )
ShmProtect( SegSlotIdx: 16 )
ShmCreate( 17, 0, 2, -> 0x0x7f3bb185a000 )
ShmCleanup SHM_PAGING_ADM_KEY
ShmCleanup( 18 )
ShmCreate( 18, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 18 ) = 0740 (octal)
ShmProtect( 18, 3 )
ShmProtect( key 18 valid )
ShmProtect( slot Index 17 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 18 prot 3/0 done
ShmCreate( 18, 0, 2, -> 0x0x7f3bb0729000 )
ShmCleanup SHM_PXA_KEY
ShmCleanup( 6 )
ShmCreate( 6, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 6 ) = 0740 (octal)
ShmProtect( 6, 3 )
ShmProtect( key 6 valid )
ShmProtect( slot Index 5 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 6 prot 3/0 done
ShmCreate( 6, 0, 2, -> 0x0x7f3a92cc9000 )
ShmCleanup SHM_ENQ_TABLE_KEY
ShmCleanup( 34 )
ShmCreate( 34, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 34 ) = 0740 (octal)
ShmCleanup SHM_ENQID_KEY
ShmCleanup( 58 )
ShmCreate( 58, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 58 ) = 0740 (octal)
ShmCleanup SHM_VB_ADM_KEY
ShmCleanup( 7 )
ShmCreate( 7, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 7 ) = 0740 (octal)
ShmProtect( 7, 3 )
ShmProtect( key 7 valid )
ShmProtect( slot Index 6 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 7 prot 3/0 done
ShmCreate( 7, 0, 2, -> 0x0x7f3bbb3b0000 )
ShmCleanup SHM_ES2_ADM
ShmCleanup( 76 )
ShmCreate( 76, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 76 ) = 0740 (octal)
ShmCleanup SHM_EM_ADM
ShmCleanup( 51 )
ShmCreate( 51, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 51, 3 )
ShmProtect( key 51 valid )
ShmProtect( slot Index 50 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 51 prot 3/0 done
ShmCreate( 51, 0, 2, -> 0x0x7f3bad5e6000 )
ShmCleanup SHM_EM2_ADM
ShmCleanup( 77 )
ShmCreate( 77, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 77 ) = 0740 (octal)
ShmCleanup SHM_EG2_ADM
ShmCleanup( 78 )
ShmCreate( 78, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 78 ) = 0740 (octal)
ShmCleanup SHM_MSBUF
ShmCleanup( 52 )
ShmCreate( 52, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 52, 3 )
ShmProtect( key 52 valid )
ShmProtect( slot Index 51 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 52 prot 3/0 done
ShmCreate( 52, 0, 2, -> 0x0x7f3bbb3b3000 )
ShmCleanup SHM_THRUN_ADM_KEY(th run adm)
ShmCleanup( 30 )
ShmCreate( 30, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 30 ) = 0740 (octal)
ShmProtect( 30, 3 )
ShmProtect( key 30 valid )
ShmProtect( slot Index 29 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 30 prot 3/0 done
ShmCreate( 30, 0, 2, -> 0x0x7f3bbb3bd000 )
ShmCleanup SHM_JAVA
ShmCleanup( 70 )
ShmCreate( 70, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 70 ) = 0740 (octal)
ShmCleanup SHM_PF_AS_KEY(Appl.Statistics)
ShmCleanup( 56 )
ShmCreate( 56, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 56 ) = 0740 (octal)
ShmCleanup SHM_PROFILE
ShmCleanup( 57 )
ShmCreate( 57, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 57, 3 )
ShmProtect( key 57 valid )
ShmProtect( slot Index 56 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 57 prot 3/0 done
ShmCreate( 57, 0, 2, -> 0x0x7f3bb95d3000 )
removing request queue
ShmCleanup( 31 )
ShmCreate( 31, 0, 2, 0x0x7fffc33c4cb0 )
ShmProtect( 31, 3 )
ShmProtect( key 31 valid )
ShmProtect( slot Index 30 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 31 prot 3/0 done
ShmCreate( 31, 0, 2, -> 0x0x7f3baf18d000 )
ShmCleanup SHM_POOL_0
ShmCleanup( 10 )
ShmCreate( 10, 0, 2, 0x0x7fffc33c4cc0 )
ShmProtect( 10, 3 )
ShmProtect( key 10 valid )
ShmProtect( slot Index 9 )
ShmProtect( Mode: 136000000 )
ShmCreate( 10, 0, 2, -> 0x0x7f3bb141f000 )
ShmCleanup SHM_DB_POOL
ShmCleanup( 40 )
ShmCreate( 40, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_POOL_50
ShmCleanup( 50 )
ShmCreate( 50, 0, 2, 0x0x7fffc33c4cc0 )
ShmKeyPermission( 50 ) = 0740 (octal)
MiCleanup:
ShmCleanup( 62 )
ShmCreate( 62, 0, 2, 0x0x7fffc33c4ca0 )
ShmProtect( 62, 3 )
ShmProtect( key 62 valid )
ShmProtect( slot Index 61 )
ShmProtect( Mode: 0 )
ShmProtect( before shmdt )
ShmProtect( after shmdt )
ShmProtect( before shmat )
ShmProtect( after shmat )
ShmProtect: shmat key 62 prot 3/0 done
ShmCreate( 62, 0, 2, -> 0x0x7f3aa51c1000 )
MpiCleanup() -> 0
removing Semaphore-Management
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 0 (type=2)
NiICloseHandle: shutdown and close hdl 0 / sock 8
DpDelSocketInfo: del info for socket 1 (type=1)
NiICloseHandle: shutdown and close hdl 1 / sock 9 - sock 10
***LOG Q05=> DpHalt, DPStop ( 18637) [dpxxdisp.c 10700]
shutdown completed - server stopped ***
Good Bye .....
dev_rd
trc file: "dev_rd", trc level: 1, release: "700"
Fri Dec 5 01:05:17 2008
***LOG S00=> GwInitReader, gateway started ( 18644) [gwxxrd.c 1691]
systemid 390 (AMD/Intel x86_64 with Linux)
relno 7000
patchlevel 0
patchno 137
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 18644
gateway runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
gateway (version=700.2007.10.01)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [127.0.0.1] SAPSH (HOSTNAME)
2 : [192.168.0.50] SAPSH (NILIST)
3 : [192.168.122.1] 192.168.122.1 (NILIST)
Full qualified hostname = localhost.localdomain
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri Dec 5 01:07:16 2008
DpShMCreate: sizeof(wp_adm) 25160 (1480)
DpShMCreate: sizeof(tm_adm) 5748600 (28600)
DpShMCreate: sizeof(wp_ca_adm) 28800 (96)
DpShMCreate: sizeof(appc_ca_adm) 9600 (96)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2008)
DpShMCreate: sizeof(wall_adm) (40056/36728/80/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0x7f7e67601000, size: 6446000)
DpShMCreate: allocated sys_adm at 0x7f7e67601000
DpShMCreate: allocated wp_adm at 0x7f7e676031b8
DpShMCreate: allocated tm_adm_list at 0x7f7e67609400
DpShMCreate: allocated tm_adm at 0x7f7e67609460
DpShMCreate: allocated appc_ca_adm at 0x7f7e67b8bc58
DpShMCreate: allocated comm_adm at 0x7f7e67b8e1d8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x7f7e67c13eb8
DpShMCreate: allocated gw_adm at 0x7f7e67c13f38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x7f7e67c13f68
MtxInit: -2 0 0
Fri Dec 5 01:07:38 2008
caught SIGINT (2)
***LOG S30=> GwStopGateway, gateway stopped () [gwxxrd.c 14589]
dev_w0
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid QD3
M systemid 390 (AMD/Intel x86_64 with Linux)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 18646
M
M
M Fri Dec 5 01:05:17 2008
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 18646) [thxxhead.c 1281]
M ThInit: running on host SAPSH
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.144 (Make PL 0.144)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
C (0.131) Do not trace password of SQLOPT into dev trace (note 1097930)
C (0.130) Performance optimization for UPDSTAT PREPARE (note 1096387)
C (0.125) Update statistic prepare on row level (note 1086430)
C (0.104) Update statistic with empty schemas (note 1041547)
C (0.095) MaxDB DBSL patch collection 1 2007 (note 1014270)
C (0.082) MaxDB DBSL patch collection 3 2006 (note 991258)
C (0.079) MaxDB DBSL patch collection 2 2006 (note 984406)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C Attach to SAP DB : Kernel 7.6.03 Build 009-123-163-622
C Database release is SAP DB 7.6.03.009
C INFO : Database 'QD3' instance is running on 'SAPSH'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPQD3'
C Command info enabled
C Now I'm connected to SAP DB
C 00: SAPSH-QD3, since=20081205010517, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081205 010517 SAPSH
C INFO : SAP RELEASE (DB) = 700
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7f3bb1426000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x7f3a80899000, size: 613580800)
M SHM_PAGING_AREA (addr: 0x7f3a70899000, size: 268435456)
M SHM_ROLL_ADM (addr: 0x7f3bb185a000, size: 10683916)
M SHM_PAGING_ADM (addr: 0x7f3bac975000, size: 2622496)
M ThCreateNoBuffer allocated 560152 bytes for 1000 entries at 0x7f3a69dcb000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x7f3bbb3b0000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation map
X Linux: Kernel supports shared memory disclaiming
X Linux: using madvise(<pointer>, <size>, 9).
X Linux: disclaiming for shared memory enabled
X ES initialized.
B
B Fri Dec 5 01:07:13 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 17, CON_ID = -1
B
B Fri Dec 5 01:07:14 2008
B dbtbxbuf: Buffer TABL (addr: 0x7f3baac4d100, size: 30000000, end: 0x7f3bac8e9480)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14203520
B ***LOG BB0=> buffer TABL started with length 30000000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: 0x7f3a66dfa100, size: 10240000, end: 0x7f3a677be100)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5030272
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/QD3/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: Opening /usr/sap/QD3/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/QD3/DVEBMGS00/data/tbxnew to /usr/sap/QD3/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 0 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 464 = 464
B 2: 17 * 40 = 680
B 3: 4001 * 64 = 256064
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13251 * 256 = 3392256
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7f3baa84c108, size: 4194304, end: 0x7f3baac4c108)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 464 = 464
B 2: 17 * 40 = 680
B 3: 4001 * 64 = 256064
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13251 * 256 = 3392256
B Tracing = 0, Shm Protection = 0, F -
Dispacher and server0 is not started during NW2004s installation
Hi,
Dispacher and server0 is not started during NW2004s installation. SAPInst is stopped on the step of the 'Start java instance'. SDM is 'running' but dispacher and server0 is 'Starting framwork'. So I configured the some parameters via configtool but I can't solve this probelm. I found the some error logs as the followings.
(22503) Starting local Command:
Command: en.sapMPP_SCS33 pf=/usr/sap/MPP/SYS/profile/MPP_SCS33_spdeai01
listen failed on port/service sapdp33
initialize_global: another instance of the enque server seems to be running. EXIT
***LOG Q01=> MsSInit, MSStart (Msg Server 1 22502) [msxxserv_mt. 1818]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/MPP/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.223.50.15] spdeai01 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [10.223.50.215] 10.223.50.215 (NILIST)
[Thr 1] 4 : [10.223.50.115] 10.223.50.115 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = spdeai01
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to internal port 3933 (3933) ***
[Thr 1] *** HTTP port 8133 state LISTEN ***
[Thr 1] CUSTOMER KEY: >Q0820898445<
[Thr 1] Wed Oct 24 18:28:11 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110500] into logged in list
[Thr 1] Wed Oct 24 18:28:21 2007
[Thr 1] MsJ2EE_AddLoggedInNode: add node [305110550] into logged in list
Our JDK version is '1.4.2_11' and We are installing on the HA environment.
How can I solve this problem? or What should I check about it?
Best Regards,
David.Check if the Database serivice is up and running. If this is not so.. you might have to start all over again..!!
VJ -
Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?
thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again. -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
Installer Encountered Errors - PLEASE HELP
Hi,
Getting very annoyed - sat at the computer for almost 2 hours.
Have windows Vista and finally it has allowed me access to install iTunes. When I go through the stages to install I get the following message:
+The installer encountered errors before iTunes could be configured. To retry these operations at a later time, please run the installer again.+
I have tried so many times. Windows is up to date and I have looked at the troubleshooting pages and am getting nowhere. I want to play with my new toy and can't. Can anyone help me get this thing installed successfully.
Thank you!See if you can get itunes to install from another Windows user account. That will tell you if the problem is system-wide or user-related.
Then try other steps listed in this article:
http://support.apple.com/kb/HT1926 -
Everytime I try to install the new itunes it come up with the following message: ' The installer encountered errors before itunes could be configured, Errors occured during installation, your system has not been modified. Please run installer again or click exit' I've tried to install it multiple times now and get the same message everytime. I've also tried re installing itunes 10, but when I go to open it it comes up with the message 'The files itunes libray.itl cannot be read because it was created by a newer version of itunes'. Please help.
Hey sjl95,
Thanks for the question. I recommend that you refer to this article if you are running into issues re-installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
ITunes 7.3 installer "encountered errors before iTunes could be configured"
I was able to originally install itunes 7.3.1.3 (upgraded from 7.2) and use it with my iphone (activated/synced for 2 weeks with no problems). I had a problem due to a disk full which corruped Outlook.
I cleared substantial disk space, reinstalled Outlook 2003. This seemed to have corrupted the iTunes sync function, so I uninstalled iTunes (using Add/Remove Programs control panel), and have since been trying to reinstall. I am continually getting the "iTunes installer Completed - The installer encountered errors before iTunes could be configured" error message.
I have read many messages and suggestions in these discussions, and already tried the following:
Completely uninstalling iTunes and Quicktime (iTunes no longer shows up in the Add/Remove programs or using the Windows install cleanup utility) follwing all the steps listed in "Removing iTunes, QuickTime, and other software components for Windows XP" http://docs.info.apple.com/article.html?artnum=93698.
Quicktime (version 7.2 Pro) is currently installed. I can cleanly install/remove Quicktime alone with no errors, but not using the combined quicktime/iTunes installer.
I have tried redownloading the itunes installer several times, and even used the Apple Software update download only option and then manually running the itunes.msi file, but still get the same error.
I have tried manually removing all instances of iTunes/iPod/activesync/iphone that I can find in the registry and all the iTunes/iPod folders as the above knowlege base article instructs.
There must still be some other remnant of the old install, because if I try to install iTtunes 7.2, I get an error message that a later version is already installed, but I have not been able to find anything else.
I have even enabled the verbose logging, the error seems to occur in this section of the log:
MSI (c) (00:C8) [11:00:26:796]: Invoking remote custom action. DLL: C:\DOCUME~1\[myusername]\LOCALS~1\Temp\MSI36.tmp, Entrypoint: iTunesLaunchConditions
Action ended 11:00:26: iTunesLaunchConditions. Return value 3.
MSI (c) (00:FC) [11:00:26:859]: Doing action: SetupCompleteError
Any suggestions on what else I can try would be appreciated. One of the main reasons I need sync my ipnone to my work windows machine is to keep my Outlook contacts and calendar. I have no problems with iTunes on my macs.
I am running XP SP2, and have local administrator rights on my Dell 610 notebook.I had to find this solution from another site, so thanks to all the people who viewed this thread & knew how to fix this but didn't bother.
If anyone is weary enough to come to this forum to solve this problem, here is one solution that worked for me & it may work for you if you encounter the error:
"the installer encountered errors before safari could be configured"
1. Use a trustworthy registry cleaner to clean your registry such as Ccleaner or Advanced System Care. This step may not be necessary though.
2. Go to "C:\Users\MyUsername\AppData(Hidden)\Local\Temp" & delete everything in it.
3. If step 2 still doesn't allow you to install Safari, then try:
4. Open Start type "CMD" in the search button, then in the cmd prompt "Regedt32"
5. In the reg editor open:
"Computer" / "HKEYCURRENTUSER" / "Software" / "Apple Computer, Inc." & try deleting the entries for any Apple programs that may be causing any conflicts.
Be aware that any programs that you delete registry entries for may not function correctly afterwards or need to be reinstalled, but this more drastic measure should hopefully allow the installation of Safari browser.
Hope this helps any further visitors to this forum looking to solve this problem it worked for me, good luck.
Message was edited by: RottenestApple -
Installer Encountered Errors before iTunes could be Configured
I keep getting the same Error over and over again:
*iTunes Installer Completed*
The Installer encountered errors before iTunes could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click Finish to exit the Installer.I'm using version 8.2 lately and i downgraded to version 7 for some reason.... After i got my new iPhone 3GS yesterday. Which is needed the 8.2 version....So i uninstall the version 7 and re-install the version 8.2 again and i got this message....
*"A NETWROK OCCURED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\BONJOUR.MSI".....*
I try to check this file in my C:\ Drive but unfortunately i can't find it and i can't install the iTunes 8.2..... and the bad thing is i can't f#*******ing use my new iPhone 3GS....
Please help me or otherwise maybe just return it to the shop and get something else instead of this new iPhone 3GS...... too much trouble.... -
I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously. -
The installer encountered errors before apple mobile device support could be configured
I'm having issues with installing apple mobile device support. Every time I try to install apple mobile device support I get this annoying message:
the installer encountered errors before apple mobile device support could be configured
I have tried these two ideas with no luck.
Had this issue, and none of the solutions above worked, here is what I did to fix the issue, Install Itunes like you normally would, admin rights ect. When you get the error message "Itunes errors occurred during installation before itunes could be configured" do not click finish, leave that folder up, no navigate to your appdata directory such as example C:\Users\Your Username\appdata\local\temp, inside there look for a file called iTunes64Setup.log or iTunes32Setup1850.log, open that up and scroll down, look for these key things as in example, "Executing: "C:\windows\system32\msiexec.exe" /i "C:\Users\Crusisxx\AppData\Local\Temp\IXP593.TMP\iTunes64.msi" INSTALL_SUPPORT_PACKAGES=1" so I would navigate inside the folder in my temp called "IXP593.TMP, there you will find all the installation packages, copy all of those files and paste either on your desktop or a new folder ect, once done you can now click finish on the failed itunes installer, now whether or not where ever you decided to place your files you copied from that temp folder you will want to run Itunes64.msi or Itunes.msi ect, and run the installer, you should now have successfully of installed Itunes.
Itunes 11.1.1 Errors occurred during installation...
I got it. I just first uninstalled iTunes then this:
1.Open up the Command Prompt as an Administrator (Go to All Programs > Accessories and Right Click on Command Prompt and then choose Run as administrator)
2.Type cd C:\Windows\SysWOW64
3.Type regsvr32 vbscript.dll (This registers VB Script with your computer.)
4.Now install iTunes as you normally would by double clicking on the install program and wait for iTunes to finish installing.
5.Type regsvr32 /u vbscript.dll (This unregisters VB Script with your computer.)
Re: "This iPod cannot be used because the required software is not installed."
What else can I do and why is it not working?Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
-
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Adobe reader 11 installation fails. error message: there was an error installing adobe reader. adobe reader installation error. null. tried using adobe cleaning tool. using XP sp3. seems that adobe 11 is not completely uninstalling. this is because when adobe reader 11 is removed from add/remove program. when pc is rebooted, adobe reader 11 entry comes back but it is like false entry as no size given. please help to succesfully install Adobe Reader 11. also tried:
1. uninstalled, rebooted, reinstalled 2. installed from different locations 3. removed adobe key from
local machine and tried to installSeriously, I do not understand what is going on - I have never seen this before!
The MSI installers are usually used in corporate environments to roll out installs on multiple machines. However, you can use it like a normal (EXE) installer; it will just go through fewer steps than the EXE. Not sure if it will improve the situation, but it's worth a try.
Another thing to try is to uninstall these remaining entries using Microsoft Fixit: http://support.microsoft.com/mats/Program_Install_and_Uninstall - also no guarantee, but also worth trying.
Maybe you are looking for
-
My husband and I use the same itunes account and ID. I set up a new account in his name with a new ID but his purchases still come under my account. On his ipod I still see my username not his. How can I change it?
-
How to delete duplicate presets in bulk?
By mistake I have imported presets twice and as they are huge in numbers, I would like to know a method to delete those duplicate presets using an easy method. Note: I don't want to find every duplicate preset one by one and thus asking for a solutio
-
Report Painter - Change multiple selection criteria
Hi Experts, I am new to report painter. I need to change a report which is being developed in Report Painter. I need to add extra selection criteria. Please help. Regards, Nitin.
-
Since july 2 I have Acrobat Pro (the paid version). But every time I start the program I get the screen with: this is a trial version. You have X days left, etc. I find that quite annoying.
-
Lllustrator and Photoshop display different colors despite synchronized CS5 Color Settings
I've got some students who noticed that Illustrator and Photoshop display completely different colors on screen for eactly the same RGB values despite Color Settings being synchronized. Settings are: CSF: North American Web/Internet (RGB color space