NW2004 SP21 - Does someone known about any Release Notes available ?

Hello Forum
I'm studying the installation of SP21 on a SAP NW2004 Portal.
However as in previous upgrades of SPs, I couldn't find what this SP21 present or enhance of some functionality.
This is important to me, as is the Documentation Guides to the Upgrade Guide.
I think the SP Guide is the same since SP15.
Could anyone be so kind to indicate me where can I find some information about this new SP21 and what is it suppose to fix/benefits the installations already operating ?
Thank you for you time.
Kind Regards
Sílvia Cardoso

Try here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000595043&
and here:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000620973&_SCENARIO=01100035870000000202&

Similar Messages

New to macbook pro and have msmoney files (mbf) stored on an external hard drive. I want to transfer them to MoneyWiz and need to convert them to qif. Does anyone know of any free software available and how do I do it. Thanks.

I am new to macbook pro and have msmoney files (mbf) stored on an external harddrive. I want to transfer them to MoneyWiz and need to convert them to qif. Does anyone know of any free software available and how do I do it. Thanks.

iTunes>Preferences (Cmd+,)>Advanced
Choose the Ext HD (and the appropriate folder) as the location for your library.

Is there any Release Notes for SPA232D-SPA302D_1.3.4_FW

Hi,
Is there any Release Notes for SPA232D-SPA302D_1.3.4_FW?
In download section I found only .bin file.
/D

You can find release notes here: http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpvga/spa100-200/release/SPA232D-302D_rn_1_3_4.pdf
Regards.

Firefox 3.6.10 update does not show any release notes. What changed?

Firefox automatically updated to 3.6.10 and brought me to a very general "what's new" page where no information about this update could be found.

In the Help menu select "Release Notes"

CVI2013 sp1 bugfixes, known issue and release notes

Hi,
Can anyone advise me where I can find CVI2013 SP1 bugfixes, known issues and/or release note?
I am searched on CD and the http://digital.ni.com/express.nsf/bycode/exmvwx but found only "Behavior Changes" and few brief lines about "known issues" on CD.

it was said it will be released later this week (or maybe next week)...

Status of Document (Release) not available

Hello all,
"Release Status" is not available in the document which is created/changed using CV01N/CV02N transactions.
I have the below customising settings for the document type.
What am I doing wrong? Please suggest.
Thanks
RJS

Hi Ravi,
If you have a predecessor status for 'Released' status, then this status will appear only if you reach the predecessor status in the DIR.
If you are using standard 'DRW' document type, then PR-Checked & AR-Archived are the predecessor statuses for 'Released'.
Check the status graphics on the top right of the second screenshot for details on the status flow.
Regards,
Ravi

HT4623 Good afternoon, could someone inform about the release of Ios 7 for Portugal???

Anyone knows the hour for the ios 7 release in Portugal???

No. Apple did not give any time for the update only that it would be today September 18th Cupertimo Time Zone.
Considering it still just 7:30 a.m. in California there is still plenty of day left for the update.
Just wait and it will come.

Does someone knows about this tool on LMS 3.2?

I am quoting from the LMS 3.2 Deployment Guide:
What’s New: Generic Device Support in RME
Day one device support for network management applications is a continuing challenge. As new hardware platforms
come to market, device support may be lagging. The CiscoWorks Incremental Device Update team announces
availability of a new "automated" update tool, providing device support for inventory and configuration functionality
within Resource Manager Essentials. This tool allows customers to quickly get support for new hardware platforms
where complete device package support through the Incremental Device Update program has not yet been
delivered. This new tool can be downloaded from
http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme andinstalled on the LMS 3.01, 3.1, and 3.2 code base. The following features are enabled for devices using the
automated update tool:
Device Management in RME:The Device Manageability Status Report provides details as to whether the device is officially supported or
managed using automatic IDU.
Inventory Management in RME:
◦System-, port-, memory-, Flash-, and bridge-related information will be queried using Entity or the OCCM
MIB.
◦Support for CDA will be provided.
●
Config Management in RME:
◦Sync archive using CLI and TFTP protocols
◦Ad-hoc template in NetConfig deployment
◦Partial NetShow if MDF association is available
◦Raw mode in version summary and version tree
◦Partial out-of-sync summary and compare configuration
◦Config Editor support for editing in raw mode only
An announcement regarding similar support capability in Campus Manager and Device Fault Manager will be sent
when it becomes available.

You can go to Common Services > Software Center > Device Update, click the the RME link, and search for GenericDev. If you find it, then you have the package installed. For any device which has a sysObjectID which RME doesn't recognize with a specific package, this package will be tried instead.
If you find that the package is not already installed, perform a device update for RME, and download and install all available device packages.

HT5085 Does someone know when this will be available in Sweden?

Is there a roll out plan for Sweden with iTunes Match?
Br
Magnus

Nobody on here will know until if/when Apple announce something.
As re-downloading music isn't yet available in Sweden then I assume that the record companies haven't yet agreed to that there yet - and until they agree to re-downloading then I doubt the iTunes Match will be possible.

HT202157 Why does Apple TV say Netflix is not available when I can watch it on my computer?

I have reset my Apple tv to factory defaults, but it did not ask me to activate it again.
For the last two days everytime i try watch a Netflix movie is says Netflix is not availble please try again latter.
I have also power cycled my apple tiv by leaving it unplugged five minutes and upgraded the software.
I was using it with no problem and am not aware of anything I did to hurt the configuraton.
Again I have reset and restarted and power cycled several times.
Not sure why it did not ask me to activate it again.
I can also watch trailers and get to the sign in page on other channels.
This is the first Apple product I have ever bought because I don't like the fact everything they have is propriatary.
I work in IT and there is a good reason why you don't see Apple servers in datacenters.
Maybe at an art department in a marketing company at the most.

I understand that point. They are mostly bought from iTunes. But, I can watch on my laptop, iPad, iPhone on an airplane or wherever without an Internet connection. So why the hang up on my apple tv, should it not just be an extension of my laptop?

Why does my ipod have the wifi not available i have wifi working my house i just can't go to set up a wifi?

how can i solve it?

ok
this is how to get the wifi on your ipod
1. go into settings
2. click wi-fi
3. make sure the switch at the top that says "Wi-Fi" is on not off
4. also make sure as to join networks is on at the bottom.
5. if not there click other
6. enter whatever your network name is and it's security type is
7. i hope this works for you
good luck!

Does someone know information about Company name:TianMei Electronic Trade Co., Ltd Address:Anbao Building No.28 street, quanzhou , FUJian, China.Is it Legit to buy there or not? or what information you have???please answer

Does someone know information about
Company name:TianMei Electronic Trade Co., Ltd
Address：Anbao Building No.28 street, quanzhou , FUJian, China
Pleas abswer is it legit or not?
Does someone have got any experience with that company?
Any information is welcome?
Or is it somekind on cheating ?`?
Do i get there a legit iphone or somekind of Chinese knock offs?
<Email Edited By Host>

You can look for authorized Apple resellers here:
https://locate.apple.com/cn/zh/
If you have any doubts about any reseller, I strongly advise that you not purchase from them. Buy your iPhone directly from Apple and you will then have no worries.
Regards.

Release notes for CC apps?

Are there release notes available for the Creative Cloud programs?
In the days of packaged and even electronic delivery there'd be a printed sheet or a pdf with release notes which might include known issue.
I ask because there are a couple of things which have come up on the forums since the release of CC versions where an Adobe staff member has gone "Yes, we know about that, and a fix is in the works". These are things that it'd be really useful to know before you start struggling to get something to work.

Hi Vikrant,
Thanks for that information. Great to know that they are indeed included and available.
However, there's something a bit daft going on here.
When you press F1 or go to help/ online help in the CC products it takes you to this page (Premiere as an example).
http://helpx.adobe.com/premiere-pro/topics.html
Which does NOT show the release notes.
To get to the right place:
http://helpx.adobe.com/premiere-pro.html
You have to go help-> online support centre.
This doesn't feel intuitive to me.
"I have a problem. I need help. I go to the help pages". As opposed to "I have a problem. I need help, I go to the online support centre"
But then maybe that's just me.
Anyhow, having found the Premiere Pro release notes
http://helpx.adobe.com/premiere-pro/release-note/release-notes-premiere-pro-cc.html
I click the "known issues link" which gives me an error 404 page not found:
http://helpx.adobe.com/content.html#main-pars_heading_7
If I scroll down the page to the "known issues" paragraph, the hyperlinks aren't active, and if I manually paste the second one:
www.adobe.com/go/pr_cc_knownissues
Into my browser I also get 404 page not found.
Since I know there are known issues in Premiere ProCC I'm sure there's a page out there somewhere just dying to be correctly linked
Cheers
Mark

1.1.2 Release Notes?

I can't seem to find any release notes on the latest update, here or on the Apple site. Granted, perhaps I just missed them. But regardless, can someone please paste them here or point me to a link? Thanks

Thanks, that's better than nothing -- I should've known wiki would've been updated by now lol
But FWIW - first, I have NO problems with Apple nor my iPhone, BUT, I WOULD like to know exactly what's being changed in MY phone. So thanks again
For the record:
1.1.2
* Battery charge level shown in iTunes
* International language & keyboard support
* Patched the TIFF exploit
* Adds custom ringtone field
* Fixed Bugs

COMPUTE_BCD_OVERFLOW on MIRO. Any SAP NOTE?

Hi,
I'm getting a COMPUTE_BCD_OVERFLOW dump with the the CX_SY_ARITHMETIC_OVERFLOW exception when doing a MIRO process.
The user is using huge values in the PO and the error is related to a multiplication between this values. (EKTE table is hoding the huge value that is greater than 1 billion).
I see no ABAP solution at this moment. A friend said that we should have some SAP note to make the field greater.
Does someone knows about this note?
below we have more details related to the DUMP:
Termination occurred in the ABAP program "SAPLFDMM" - in "DETERMINE_AMOUNTS".
The main program was "SAPLMR1M ".
The procedure is in program "SAPLFDMM "; its source code begins in line
197 of the (Include program "LFDMMF00 ".]
Source code:
300 *     Quantity of goods received greater than purchase order qua
301 *     or "Delivery completed" indicator is set
302       if ekbp-wemng > ekbp-bemng     "Überlieferung
303       or ekbp-elikz <> space.         "Endlieferungskennzeichen
304 *       offene Bestellmenge = Wareneingangsmenge minus Rechnungs
305 *       open PO quantity = quantity of goods received - quantity
306         offen_bestmenge = ekbp-wemng - ekbp-remng.
307       else.
308 *       offene Bestellmenge = Bestellmenge minus Rechnungsmenge
309 *       open PO quantity = PO quantity minus quantity invoiced
310         offen_bestmenge = ekbp-bemng - ekbp-remng.
311       endif.
312
313 *------- Obligo = offene Bestellmenge * Bestellwert / Bestellmen
314       if ekbp-bemng > 0.               "Division durch 0 verhind
315         if offen_bestmenge = ekbp-bemng.
316           wabetrag = ekbp-bewtw.   "erspart unnötige Multiplikat
317         else.
>>>>>           wabetrag = offen_bestmenge * ekbp-bewtw / ekbp-bemng.
319         endif.
320       endif.
321     endif.   "if ekbp-vrtkz = const_po_valuebased
Thanks in advanced!

Hi Rob, Thanks for answer.
Unfortunately, I do not have access to do that. The MM functional asked for the ABAP leader of the project for look for it...
I asked here because maybe someone had a common problem and want to share the solution. I'm not lazy If I could look at the note sure I would did!
Does someone knows this error or something related on this?
Thanks in advanced!

NW2004 SP21 - Does someone known about any Release Notes available ?

Similar Messages

Maybe you are looking for