NW2004s on Windows 20003 Server
Hi,
I have installed NW2004s for the first time on Windows 2003 Server. My problem is that I can not start the Server with it's standard Password: "abcd1234" from SAP Management Console. I didn't change the standard password while I installed the NW2004s.
User: NW2004S\Administrator
Password: abcd1234
regards,
Sharam
Hi Sharam,
Try giving your system password(desktop login password). Are you sure that your giving right password.
Regards, Suresh KB
Similar Messages
-
Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server
HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
Install NW2004s on windows server 2008
I want to install and configure NW2004s on windows server 2008 with Oracle combination , Can some one let me know how do i go about or could guide me withthe steps for the same. please also suggest some SAP notes, which have more information for applying patches
Hi Harender,
You can get the details whether SAP supports this platforms or not at http://service.sap.com/pam.
You can also get the installation guides or documents for installation at
http://service.sap.com/instguides.
Refer to the note 822379 it might help youfor patches upload.
Reward points if helpfull.
Regards,
Vamshi. -
Sizing for NW2004s 7.0 App server
Hi All
This is regarding the sizing req's for SAP NW2004s (7.0) app server which is required for the installation of GTS. I am going through the req's for a new implementation of GTS 7.1 for a very small user group ( Less than 10) on AIX with Oracle.
I have been told that the initial estimates for the server HD size cam up to 75 gb each for the DEV and QA and this apparently includes the app+db.
I am not familiar with the quicksizer and someone else arrived at this number. I doubt that 75 gb for an ABAP+JAVA NW 7.0 install would be sufficient to house the db and app and am still reading through documentation to verify this.
Can someone who has gone through the NW app server installations clarify this and let me know if there is a breakup of file sizes for the Orcale and the SAP files for an NW 2004s app server install.
Thanks
VicWas this installation done on UNIX ?
: nope System that I tell you is windows.
Do you have any breakup for the SAP sytem and the Database files (sapdata and teh log files) ?
: BREAKUP ???? did you mean backup if "backup" is YES.
Does this account for the swap space and how RAM do you have on your system ?
: for RAM I have on my system is 9GB but I can install 3 instance(SID) and DB in one Server
maybe we can share Exp. in how to tuning for best performance next time -
Server invontory of Windows 2003 serve
Hello,
We have installed the ZFS invenrory agents on several Windows 2000 servers
and 2 Windows 2003 servers.
The Windows 2000 servers invontory just fine. The Windows 2003 serves do
not inventory at all.
The remote control on both 2000 and 2003 work just fine.
I think it may have something to do with the security enhacements in Windows
2003, but I;m not sure where to start.
I have attached a screen shot of the ZFS server screen in hopes it might
help. The IP address listed in one on the Windows 2003 servers in question.
Thanks.Here is what is in the log file from one of the 2003 servers:
2005.01.31 14:24:06 [TED] Log file maintenance scheduled for: Mon Jan 31
14:24:16 CST 2005
2005.01.31 14:24:21 [TED] Sent variables to policy service.
2005.01.31 23:00:09 [TED] Stopped distribution from distributor
JJMA-P4ZENWORKS.jjma.com due to mismatched destination in route.
2005.01.31 23:00:09 [TED] 192.168.120.10: Workorder proceeding.
2005.01.31 23:00:09 [TED] Distribution Reply for
Server_INV_Distro.Pascms.Dept40.McMullen, 1099544401002, message = 5 was
sent successfully to jjma-p4zenworks.jjma.com
2005.01.31 23:00:10 [TED] Stopped distribution from distributor
JJMA-P4ZENWORKS.jjma.com due to mismatched destination in route.
2005.01.31 23:00:10 [TED] 192.168.120.10: Workorder proceeding.
2005.01.31 23:00:10 [TED] Distribution Reply for
Server_INV_Distro.Pascms.Dept40.McMullen, 1107234000219, message = 5 was
sent successfully to jjma-p4zenworks.jjma.com
"Ron van Herk" <[email protected]> wrote in message
news:6mbMd.7776$[email protected]..
> Use iManager, look at the logs or enable the DOSBOX to see what happens on
> the Win 20003 box, maybe that indicates what is causing the refused
> connection.
>
> Ron
>
> "Damon Vanbuskirk" <[email protected]> wrote in message
> news:5e8Md.7471$[email protected]..
> > Hello,
> >
> > We have installed the ZFS invenrory agents on several Windows 2000
servers
> > and 2 Windows 2003 servers.
> >
> > The Windows 2000 servers invontory just fine. The Windows 2003 serves
do
> > not inventory at all.
> >
> > The remote control on both 2000 and 2003 work just fine.
> >
> > I think it may have something to do with the security enhacements in
> Windows
> > 2003, but I;m not sure where to start.
> >
> > I have attached a screen shot of the ZFS server screen in hopes it might
> > help. The IP address listed in one on the Windows 2003 servers in
> question.
> >
> > Thanks.
> >
> >
> >
> >
>
> -
Windows Home Server 2011 and Windows 8.1 desktop
My questions is whether a Windows Live account and a local account can be combined in Windows 8. I asked this question in Microsoft Community and
an MS employee said I should ask my question here.
Is there a way to have both active?
I want to reap the benefits of having a live account to keep everything in sync and fully utilize the features of Windows 8.1 but I have a Windows Home Server 2011 that requires that I have a local user account that matches the server side so that I can
use resources on the server.
I've seen lots of tutorials for switching between the two account types but nothing for combining them.
Is this even possible?
Thanks in advanceYour question has not been answered.
Windows Home Server 2011 does not use domains, so even if you had Windows 8.1 Pro, you'd still be left without a solution. I have one PC with Windows 8.1 Enterprise and that does work with Home Server; and a laptop with Windows 7 Pro and that works fine
too. Like you, I have issues with Windows 8.1 Pro.
Does anyone from Microsoft Server actually read these posts?
@PeterPensive,
the OP's original question was relating to "linking/combining" an MS Account with a Win8.x local account. That question was answered. (the answer is no), so, for a WHS scenario, linked accounts aren't possible, but, in Win8.x, an MS Account might be suitable
for use with WHS.
Are you confirming that an MS Account on Win8.x works ok with WHS?
< Also, this is a community-driven forum - MS staff rarely, if ever, participate here.. >
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional
Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
ZurvaanYes, of course. Both versions works but you have to be prepared for lots of RAM.
-
How to install a plugin on 64 bits windows 2008 server?
From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
How to install Cisco Work 3.2 on Windows 2008 Server Standard R2
Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
FaridHi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet -
How to install KB2950358 on Windows STORAGE Server 2008 R2?
Hello
I am experiencing the exact issue described
here on my WD Sentinel DX4000 nas box which runs Windows Storage Server 2008 R2. This is causing regular crashes and reboots and general unreliability when the memory leak causes all ram to be used up and the CPU is constantly running at 100% which both
increases electricity usage and shortens the lifespan of the system.
I have downloaded the hotfix on that KB article but it refuses to install claiming that it is not compatible. When the underlying Windows Server 2008 R2 OS is the same how can it not be compatible? My theory is that the Storage server version is only used
and available on a small handful of OEM devices and there's barely any information of it on the internet so I think Microsoft have forgotten to add it to the compatibility list for this particular hotfix.
After weeks of searching, I cannot find a way to force install the update. It's not a business-critical system and I've got backups of it so I am happy to try manual or risky efforts to get it installed. I have tried extracting the MSU file but that doesn't
give me any useful files to install it manually or skip the compatibility checks.
I've also tried to contact Microsoft directly but they don't even have Storage Server listed as an option on their support contact page so I've given up there, as a last resort I am hoping someone here can point me in the right direction. Other online forums
refuse to help saying it's too risky with a server but personally I want it installed and will try anything to do so because I've got a £1000 NAS sitting here that is unusable due to this issue. I'd rather not reinstall the OS as the problem reoccurs - I've
tried it already before I found this KB article.
Bottom line, Microsoft have identified the issue and released a hotfix, the server version IS supported, but was not added to the compatibility restrictions of the update so I cannot get the update installed.
Any advice gladly received. Hopefully someone from MS will see this and be able to update the compatibility of the hotfix if nothing else is possible.I see SP1 is a prerequisite. Also the manufacturer may have specific patch procedures or recommendations so I'd probably contact them directly.
http://support.wdc.com/product/install.asp?wdc_lang=en&fid=wdsfWDSentinel
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?
Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Robthose may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo -
Error connecting to the SAP SRV on Windows 2008 Server platform
Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani DlaminiHi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy. -
Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem
Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
DiwakarOPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here. -
Problem Oracle 10g database Installation on Windows 2003 Server
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
Installing problem on Windows 2003 Server 64 bit
Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
MatthiasHi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias
Maybe you are looking for
-
Video freeze, sound only, no solution
I'm having problems with video iChat. Shortly after I connect, my video freezes (both send and receive) but the chat continues with sound. If I try doing anything in iChat (like quitting) I get the spinning wheel of death. The only thing I can do at
-
My hp 7160 wants to print in black only after replacing the yellow cartridge. Ink level shows full amount. Test page prints fine. I have tried different programs to color print in, all return the same error message.
-
Image size reduction is doing new and unwelcome things to my PNGs
I've recently upgraded to Photoshop 6 from 5.5. My work involves taking large (1500-3000 pixels square) and reducing them to 256 or below. Upon upgrading to Photoshop 6 I started to notice that the images were looking a little harsher and less blende
-
Scripting Crash- "Create from Data Type" on Typedef Enum
I just encountered a crash that I can duplicate in both LabVIEW 2013 and 2012 (student). Attached is a project that contains the code I used on 2012. Run the target VI. (I can get the project I had in 2013, if needed, sometime next week) Basic steps:
-
Type fonts to In design not listed in memue
I am unable to find the typeface Neue Hammer Unz.. 1,2, Type 1 and alternates.to us in my Indesign form. It is installed in windows and show up in other programs to use. but not in Indesign and Illistrator. How do i install it in these 2 programs . i