NW2004s SneakPreview ABAP - setRegistrySecurity status ERROR

winXP SP2
CPU 1.73 GHZ
RAM 1024 MB
login as Administrator
install type local machine
at Step 3 - install common system files
error show
===========
INFO 2006-02-23 16:57:25
Execute step setRegistrySecurity of component
|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0.
INFO 2006-02-23 16:57:25
Execution of preprocess block of
|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0 Step setRegistrySecurity returns TRUE.
INFO 2006-02-23 16:57:30
Setting ACL of registry entries for SAP system NSP...
INFO[E] 2006-02-23 16:57:34
FSL-01027
Account user="bmaxr52\SAP_NSP_LocalAdmin" does not exist.
WARNING 2006-02-23 16:57:34
Error 1307 (This security ID may not be assigned as the owner of this object.)
in execution of a 'SetNamedSecurityInfo' function, line (633), with parameter
(Error in setting security on 'MACHINE\Software\SAP\NSP' registry).
ERROR 2006-02-23 16:57:34
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2006-02-23 16:57:34
MUT-03001 Value of type HKeyClass has illegal value '0'.
ERROR 2006-02-23 16:57:34
FCO-00011 The step setRegistrySecurity
Please Help

follow the steps..
delete OS users nspadm and SAPServiceNSP by right click on My computer, click on manage
delete OS groups anything starts with SAP..
delete Maxdb by going into control panel add remove programs
remove folders usr, sapdb in C drive and sapinst_instdir in prgram files
run regedit and remove NSP and sapdba folders.
check java_home set and path set
give "admin" to all db passwords when prompts
start the installation fresh.
all the best..
Sarath.

Similar Messages

Using the SAP GUI from the NW2004s SneakPreview Download

Hello,
does anyone else have major problems with the SAPGUI from the NW2004 SneakPreview download page?
Im getting a runtime error when logging on:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          24.12.2005 00:34:11
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
     Control Framework : Error processing control
     Technical information about the message:
     Message classe...... "CNDP"
     Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_GUI_CFW====================CP
     Include                                 CL_GUI_CFW====================CM002
     Row                                     23
     Module type                             (METHOD)
     Module Name                             FLUSH

Hello Rich,
the sap gui from the NW2004s SneakPreview page is on patchlevel 8. The problem is when i use the latest sap gui from the service marketplace (full install!) i cant event call the gui. Getting a error when doubleclicking on the SAP Gui icon.
'The procedure entry point 'RfcResetTraceDir' could not be located in the dynamic link library 'LIBRFC32.dll' .'
So actually since i installed the NW2004s on my local notebook the only sap gui "working" (at least i can call it) is the one from the NW2004s Sneakpreview page but im getting this error mentioned here on all systems! not only on the NW2004s system
regards,
Markus

SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version ERROR in importing ABAP phase

Hi all,
I am trying to instal this trial version on my computer. I have tried with Windows XP Pro SP2 and with Windows XP Pro SP3 and I get the same error, in both cases, in the phase 18 wich is: Importing ABAP.
These are the errors I get:
Import Monitor jobs: running 1, waiting 27, completed 0, failed 0, total 28.
Import Monitor jobs: running 2, waiting 26, completed 0, failed 0, total 28.
Import Monitor jobs: running 3, waiting 25, completed 0, failed 0, total 28.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 25, completed 0, failed 1, total 28.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 25, completed 0, failed 2, total 28.
Loading of 'SAPSSEXC_1' import package: ERROR
Import Monitor jobs: running 0, waiting 25, completed 0, failed 3, total 28.
Import Monitor jobs: running 1, waiting 24, completed 0, failed 3, total 28.
Import Monitor jobs: running 2, waiting 23, completed 0, failed 3, total 28.
Import Monitor jobs: running 3, waiting 22, completed 0, failed 3, total 28.
Loading of 'SMIMCONT1' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 0, failed 4, total 28.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 0, failed 5, total 28.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 0, failed 6, total 28.
Import Monitor jobs: running 1, waiting 21, completed 0, failed 6, total 28.
Import Monitor jobs: running 2, waiting 20, completed 0, failed 6, total 28.
Import Monitor jobs: running 3, waiting 19, completed 0, failed 6, total 28.
Loading of 'SEOCOMPODF' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 0, failed 7, total 28.
Loading of 'SAPNTAB' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 0, failed 8, total 28.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 0, failed 9, total 28.
Import Monitor jobs: running 1, waiting 18, completed 0, failed 9, total 28.
Import Monitor jobs: running 2, waiting 17, completed 0, failed 9, total 28.
Import Monitor jobs: running 3, waiting 16, completed 0, failed 9, total 28.
Loading of 'SAPSSEXC_2' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 0, failed 10, total 28.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 0, failed 11, total 28.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 0, failed 12, total 28.
Import Monitor jobs: running 1, waiting 15, completed 0, failed 12, total 28.
Import Monitor jobs: running 2, waiting 14, completed 0, failed 12, total 28.
Import Monitor jobs: running 3, waiting 13, completed 0, failed 12, total 28.
Loading of 'REPOTEXT' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 0, failed 13, total 28.
Loading of 'STXL' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 0, failed 14, total 28.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 0, failed 15, total 28.
Import Monitor jobs: running 1, waiting 12, completed 0, failed 15, total 28.
Import Monitor jobs: running 2, waiting 11, completed 0, failed 15, total 28.
Import Monitor jobs: running 3, waiting 10, completed 0, failed 15, total 28.
Loading of 'WDY_CTLR_COMPO' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 0, failed 16, total 28.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 0, failed 17, total 28.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 0, failed 18, total 28.
Import Monitor jobs: running 1, waiting 9, completed 0, failed 18, total 28.
Import Monitor jobs: running 2, waiting 8, completed 0, failed 18, total 28.
Import Monitor jobs: running 3, waiting 7, completed 0, failed 18, total 28.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 0, failed 19, total 28.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 0, failed 20, total 28.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 0, failed 21, total 28.
Import Monitor jobs: running 1, waiting 6, completed 0, failed 21, total 28.
Import Monitor jobs: running 2, waiting 5, completed 0, failed 21, total 28.
Import Monitor jobs: running 3, waiting 4, completed 0, failed 21, total 28.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 0, failed 22, total 28.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 0, failed 23, total 28.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 0, failed 24, total 28.
Import Monitor jobs: running 1, waiting 3, completed 0, failed 24, total 28.
Import Monitor jobs: running 2, waiting 2, completed 0, failed 24, total 28.
Import Monitor jobs: running 3, waiting 1, completed 0, failed 24, total 28.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 0, failed 25, total 28.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 0, failed 26, total 28.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 0, failed 27, total 28.
WARNING[E] 2009-04-10 18:45:34.749
           CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR      2009-04-10 18:45:34.764 sixxcstepexecute.cpp:950
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
I am very new on this so I probably will not understand many technical words.
Please. Can any one tell what´s going on. This is the 5th time I try to instal the program.
Thank you very much in advance.
Regards.

Hi,
I got a similar error while installing Solution Manager 7 EHP1 on Windows/Oracle. Ihave gone through the import log, and the respective logs directed to, and pasted below.
Loading of 'REPOSRC' import package: ERROR
ERROR: 2009-06-18 11:19:40 com.sap.inst.migmon.LoadTask run
Loading of 'REPOSRC' import package is interrupted with R3load error.
Process 'D:\usr\sap\SMN\SYS\exe\uc\NTAMD64\R3load.exe -i REPOSRC.cmd -dbcodepage 4103 -l REPOSRC.log -stop_on_error' exited with return code 2.
For mode details see 'REPOSRC.log' file.
REPOSRC.log
(TSK) ERROR: file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\REPOSRC.TSK.bck already seems to exist
             a previous run may not have been finished cleanly
             file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\REPOSRC.TSK possibly corrupted
D:\usr\sap\SMN\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
REPOSRC.TSK
REPOSRC.TSK.bck
Upon inspection of the previous .TSK files, i found that it contained a list of Tables to be created: the REPOSRC.TSK.bck was a continuation of the same list. Hence the installation uses/used both to see where it had stopped.
I found a sapnote 455195 (last paragraph) which advises that i run R3load with the -merge option, but how can i do that during the installation process?

System Refresh SAPINST.exe error ExeProcs was executed with status Error

Hi Everyone,
                     As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
The error being displayed is as follows:
An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
sapinst.log file contains following information:
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
INFO 2010-11-06 17:40:31
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2010-11-06 17:40:41
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
INFO 2010-11-06 17:40:41
Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
ERROR 2010-11-06 17:40:58
FCO-00011 The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
Our Environment details:
SAP Version : ECC6
OS                 : Microsoft windows server 2003
DB                 : Microsoft SQL Server         2005.
Can some please guide me in debugging this issue. Your help is highly appreciated.
Thanks a lot in advance.
Kind Regards,
Bharani.

Hi Satya,
             Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
             Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
             As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
Thank you,
Kind Regards,
Bharani.

Redwood CPS job goes to status ERROR but job works completes ok in SAP

Hi
When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
Checked the operator messages and all it says is:
Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
- doesn't elaborate why the job has status Error.
Is this saying the CPS part had an error or the ABAP part??
Ross

Hi Anton
I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
Cheers
Ross

DTP-ABAP run time error- Urgent

Hi All
I had put Sales order as the key in my COPA DSO,due to which i was getting summarised records, nw i removed this key and put the Lowest granular detail key and i.e BW doc # (0doc_num) & then i have activated my DSO.Now when i do the DTP frm COPA Datasource to my DSO, the Records get updated but in DTP run i get ABAP run time Error as 'ASSIGN_TYPE_CONFLICT'
Short Text: Type Conflict with ASSIGN in program "GP493C06NEDFLBYD3SN1KJR3EDX"Can any1 please advice on this as this is quiet urgent.
Points are assured
Thanks

Hi Noor,
Regarding your problem, p/s do this:
1. Go to tx: RSSGPCLA
2. Highlight the RSTRAN_MASTER_TMPL then click set status button
3. Re-execute the DTP.
Or you can see it : Notes: 908427
As your references.
Hopefully it can help you a lot.
Best regards,
Niel.
thanks for the points you choose to assign.

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Material statuses error message should go after entering Trackin No in PO

Hi All,
I have created one Material statuses with error message, I have created material with the use of that material statuses..
Its working fine,At the creation of PR, PO I'm getting that Error message..
My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
Is it possible?? how to do it?? plz help me...
Is it possible in standard SAp???
thanks and regards
rames reddy

Hi,
You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
And then assign field selection key to PO Document type and save.
SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
The same you can do for PR document type by having a field selection key for PR document type.
Regards,
Biju K

While creating a student through piqstc getting abap run time error

Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti Swain

Hi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain

STPPOD Idoc creation status : Error in ALE Service

Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text:   IDoc: 0000000000211243 Status: Error in ALE service
T100 Text:     Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role          Basic Type     Receiver Port           Application     Output Mode
LS        DELVRY03      A000000018 (XI port)           GRN               Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan Keshwani

Nikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani

Time machine backup error OS Status error 2

Time machine has been backing up to newly replaced Time Capsule with no Time Machine issues until today.
There have been a few Time Capsule 'amber flashing light' moments, solved with a reset.
But after one such reset this morning, despite the green light being steady, the error message stated in the title above has appeared.
Time capsule is visiblle and properly configured, according to Airport Utility.
On the menu bar, the Tme Machine logo is grey, and states "Time Machine is not configured".
In the Time Machine preferences window, have re set the Time Capsule as the backup disk (several times).
Time Capsule green light is on, and I can hear it whirring into action when I select it as back up disc.
The complete message reads:
Time Machine can’t access the backup disk “(my name) Time Capsule”. Time Machine backup OS status error 2.
I am Running OSX 10.6.7
Time Capsule 1 TB
Less than one month old, and the second time calsule replacement form Apple.
Can anyone please shed any light on this?
Many thanks
Lorraine

Is the NAS designed to work with Time Machine, because Time Machine isn't designed to work with a NAS.
See this post (Major Dude) that is in the More Like This section:
Time Machine and ReadyNAS Duo

Media encoder status error CS4

I cant get my CS4 projects to encode!
Media encoder gives me a status error. (yellow triangle in the status column) When I open the text file I get:
- Source File: C:\Users\Andrew\AppData\Local\Temp\denis final CS4_1.prproj
- Output File: E:\Sequence 01.wav
- Preset Used: Windows Waveform 48kHz 16-bit
- Video:
- Audio:
- Bitrate:
- Encoding Time: 649:51:33
8/25/2009 9:10:49 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Other info:
-Vista 64bit,
-Adobe creative Suite CS4. Premiere CS4 4.1.0
-It wont encode anything, I've tried a few projects, the above one was an export of audio timeline.
-The project "denis final CS4.prproj" is actually in my "E:" drive
-A renamed project called "denis final CS4_1.prproj" (created by CS4 I assume) does in fact exist in "C:\Users\Andrew\AppData\Local\Temp\"
-I am unable to deactivate Premiere CS4 . It allows me to deactivate successfully, but comes up active next time I run.
Any ideas?
thanks,
Andy

Here's what I get after a few minutes of being in the encoder. Nothing actually starts encoding:
- Source File: /Users/user/Library/Caches/TemporaryItems/Wedding.prproj
- Output File: /Users/user/Video/Projects/Wedding/DVD/_Wedding.mpg
- Preset Used: Export Widescreen DVD 7Mbps CBR
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:19
Sun Dec 20 15:56:11 2009 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Is there an error code in there?

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Service entry sheet reversal document (Status: Error in process) List repor

Hi,
I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
while investigation i found below options (not exactly meeting my requirement)
1) Display and Process Confirmations Centrally >Document Category>reverse documents
which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
2) I can execute PPB_PD with BUS2203>status>I1019
is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
Thanks,
Jai

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

NW2004s SneakPreview ABAP - setRegistrySecurity status ERROR

Similar Messages

Maybe you are looking for