NW2004s SP12 - SP13: Model DC cannot publish Modelclasses to other DCs

All,
We are facing an issue with accessing the model classes in the another webdynpro DC once we upgraded our portal from sp12 to sp13.
We referred to the following thread NW2004s SP12 -> SP13: Model DC cannot publish Modelclasses to other DCs
We tried keeping the package name same for model as the model class's as in the above thread.
Did anyone else face similar kind of issue?
Any lead on this would be appreciated.
regards,
Pobi

Hi Shibendra,
In your model DC, the required model class files that need to be packed into a public part have to be added as "File" type entities to the public part.Till SP12,the model classes were being added as "Java Package Tree" type entities which does not work in SP13.
Please refer to the SAP note # 1126451 for more details on this change of behaviour in SP13.
Regards,
Ashitha.

Similar Messages

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish

Trying to publsh changes to my website. I get a message "There was an error communicating with the FTP server. Try again later, or check with your service provider." I did, and all my settings are correct, but still cannot publish.
Any other ideas?

Most likely you are suffering from a bug in iWeb that doesn't let you publish websites if an image you have added to your site begins with space. You can either search for that image and remove it.
<Link Edited by Host>

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Cannot publish 1 page in CS4. Other pages including index.html ok. Error message results.

After many months of no difficulty, I suddenly cannot publish changes to one of my pages (all others work) without getting the error message 'Another instance of Contribute is doing a workflow operation. Do you want to break the workflow and continue.....?' Whether I say yes or no and follow the prompts, it doesn't work. One way lets me exit, the other locks up my computer and I have to 'end task' to get control back. I hoped that the answer to the 'cannot publish index page' thread would help, but I didn't understand because most of this stuff is over my head. The only thing unusual I can dectect is the page name has an # sign after html as in 'name.html#tuition.' The word tuition refers to a pointer on the page. When I switch to edit mode, an asteric * appears after 'html' on the page name. I do not see that on any other page when I edit. I have CS4 version 5. Can anyone help? I don't know how many people there are in India, but I talked to half of them in a 2.5 hour 'session' in which I was transferred in a least 3 complete loops to every department and passing 'go' 3 times before some techie finally said I should email my question in and will get a reply within 3 days. Yeah, right. Worst tech support experience I have had in 10 years.

Hi,
Can you try deleting the Preferences and the Contribute's User Configuration folder. You will lose your website connections, you can recreate them again after relaunching Contribute.
If you have installed Contribute in Mac, go to <Username>/Library/Application Support/Adobe folder and delete Contribute CS4 folder there. Also, go to <Username>/Library/Preferences/ folder and delete the 'Adobe Contribute 5 Preferences' file.
If you have installed Contribute in Windows XP, the Contribute's Configuration folder will be in C:\Documents and Settings\<your username>\Local Settings\Application Data\Adobe\. Delete the Contribute CS4 folder there. To clear the registry for Contribute, type 'regedit' in the Run window.(Click Start, and click Run, and then type 'regedit' in the text field.) Select HKEY_CURRENT_USER, then Software, then Adobe, then Contribute CS4. Click Delete button. Close the Registry Editor window.
The <username>, I have mentioned above is the name with which you will have logged into the machine.
Now, Relaunch Contribute and connect to your website and try editing the web pages from your website. Can you try this?

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

I updated to os x 10.8.5 today and now I cannot publish changes to my web page through iweb. iweb crashes every time I try to publish

First do the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Next, in Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help

update to the latest iOS version.

Hi, i cannot publish my iWeb site with a non mac domaine name...can anyone help please?

hi, i cannot publish my iWeb site with a non mac domaine name...can anyone help please?

Hi, I have a site developed by myself usinf iWeb and as iWeb are no longer hosting teh sites in 2012 i have found another domaine. It is with Go Daddy and the domaine / name is live. I have tried to publish site using fttp but keeps coming up wih a common error message saying the info i have input is incorrect. I have tread this may be an issue if host is a windows based host???
appreciete your help

Cannot Publish in ADI ver 7.2.4

Hi,
Is this a known bug issue? I have a correct tnsnames file, and all correct passwords, however I still cannot publish reports.
I was told that this is a known issue with ADI ver 7.2.4. I am trying to find a web page from Oracle that acknowledges this bug, but I cannot find it.
Anyone know the bug in ADI and where I can find info about it? I tried to Google it, however it didn't come up. Or is anyone running 7.2.4 and able to publish?
Thanks in advance!!!

I am using ADI version 7.2.5, but I think we were using that version before.
Are you saying that you are able to log into ADI, but when you submit a report,
you receive an error message?
What does the error message say?
I recall having an issue before, because I forgot to include the
'FND...' entries in the tnsnames file..
Mark K

Cannot publish to MP4, get blank, yellow warning

I am using Captivate 6 (cloud - online) - which I just purchased June 2013. I use an iMac OS 10.8.4
The file size I am tyring to publish is 38.8 MB, but I cannot publish to MP4.
I even tried with a file that was only 4 MB, and cannot publish.
I also have the latest version of Captivate (6.2) Updated today.....
Tried after the upadte and still cannot publish.
The file names do not have any odd characters or spaces.
Any help would be appreciated.

Hi there,
Can you please confirm what is the resolution of your project? (check the bottom right side or click on modify > rescale project and check height & width).
Create a back up of your project (save it with a different name on another location), then rescale the project, so that W & H both should be in even numbers. (increase or decrease W or H by 1 to make them even)
Then republish your project in .MP4 and check whether this works?
Thanks.

Cannot publish .mp4 with AdobeCaptivate 7

Hello,
I cannot publish mp4 files. I creted a software simulation and want to publisg this as an mp4 file.
The AdobeVideo publisher starts and quits immediatelly. I gave had this with Captivate 6 as well but back in the day I was not using this feature so I did not deal with it. Now that i need it I cannot work!
I am using MAC and mountain lion on my iMac and Maverics on my laptop.
Also checking the applications folder it seems that videopublisher is not properly installed. I have unistalled and reinstalled several times but no change. My IT dpt. tried as well and no joy.
The files generates but it is 0bytes as you can see:
I have heard about the issue before but I have searched throughout the web and your forum and could not find a resolution to my problem.
Can you please help me?
Regards,
Argi

I am using ADI version 7.2.5, but I think we were using that version before.
Are you saying that you are able to log into ADI, but when you submit a report,
you receive an error message?
What does the error message say?
I recall having an issue before, because I forgot to include the
'FND...' entries in the tnsnames file..
Mark K

Cannot publish: solution found

Hi all. I'm an iWeb/.mac newbie with a trial .Mac account testing whether or not to keep the .mac.
I first fired up iWeb a few weeks ago, then didn't have time to mess with it. Recently, from lack of time to do a photo gallery myself via emacs, and the need to share some pictures, I used iPhoto to put some pictures online on the .mac account.
That worked fine and page was created, that is until I started messing with iWeb trying to add more pages. I had previously published one small/test page just fine, then continuously (weeks) had problems and could not publish. Then 1.1.1 came out, and I still could not publish.
Some of the solutions I tried: editting the Domains.sites package. Deleting the iweb prefs file. Deleting the Domains.sites file. (see group archive for explanations of these methods)
Nothing worked, and I spent hours reading all your helpful messages in this forum and surfing for solutions.
Last nite I finally hit on the problem - an upstream httpd proxy server (squid, on a Firewall). I realized the first iWeb page I had published I did from a Mac at work. The rest I tried doing from home, where the proxy server is. Whenever I tried to publish from home I got the "cannot publish" error. I had mistaken that for .Mac downtime, slowdowns, phase of the moon, you know the drill.
So last nite I turned of the web-proxy here, and lo and behold I now have absolutely no problems publishing (proof: http://web.mac.com/lottadot/ )

With the firewall I'm using it's just a checkbox to enable/disable. YMMV. BTW, Astaro is free for home use. http://astaro.com/

Eclipse cannot publish to osb 10.3.3

Hello experts,
It seems that I cannot publish from Eclipse to a linux osb test app server.
The error message:
The specified domain path is not a valid Oracle Service Bus domain
Already checked the config.xml file according to a older post Oracle Service Bus configuration project deployment problem .
it is <source-path>/opt/middleware/osb_11.1/lib/kernelEar</source-path>
My versions follow:
Eclipse Platform
Version: 3.7.2
Build id: M20120208-0800
TIA!
Edited by: NickAiva on May 2, 2013 5:11 PM
Edited by: NickAiva on May 3, 2013 11:41 AM

Yes, it does.
Version compatiblity issue between OEPE and OSB
Project developed on higher version of OEPE OSB plugin may not get deployed into lower version of OSB runtime as it is not certified. Even Oracle won't provide any support if you will face any issue, in such case. So it's better to use compatible OEPE OSB plugin (in your case OSB 11.1.1.3.0)
I asked you whether you have PS2 (11.1.1.3.0) installed in your machine from where you are trying to publish and definitely answer is "No". You are using OSB plugin of higher version for development and trying to publish the project to lower version of OSB, which is not certified (or supported, in other words)
OEPE 11.1.1.5 is certified with OSB 11.1.1.3.0 plugin so please use this combination.
Regards,
Anuj

Cannot publish video on Ipad

Help! I'm trying to upload a video to youtube on the ipad and it's saying cannot publish…do you know why this is happening and how I can get the video to upload?
Thanks!

Unless there's a way to do it through the YouTube app, you will not be able to do this using the Safari web browser on the iPad.

Model.AppModuleImpl cannot be cast to model.MantainScreenAppModuleImpl

hi am having this error when trying to run my application,am in jdeveloper 11.1.1.6.0
<oracle.adf.view.rich.component.fragment.UIXRegion> <ADF_FACES-00009> <Error processing viewId: /maintainschema-task-flow/maintainSchema URI: /Re-design/maintainSchema.jsff actual-URI: /Re-design/m
aintainSchema.jsff.
javax.faces.FacesException: javax.el.ELException: java.lang.ClassCastException: model.AppModuleImpl cannot be cast to model.MantainScreenAppModuleImpl
        at javax.faces.component.UISelectItems.getValue(UISelectItems.java:144)
        at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.addSelectItems(SelectItemUtils.java:184)
        at oracle.adfinternal.view.faces.renderkit.rich.SelectItemUtils.getSelectItems(SelectItemUtils.java:78)
        at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectOneChoiceRenderer.getSelectItems(SimpleSelectOneChoiceRenderer.java:98)
        at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer._renderContent(SimpleSelectBaseRenderer.java:208)
        at oracle.adfinternal.view.faces.renderkit.rich.SimpleSelectBaseRenderer.renderElementContent(SimpleSelectBaseRenderer.java:122)
        at oracle.adfinternal.view.faces.renderkit.rich.FormInputRenderer.encodeAllAsElement(FormInputRenderer.java:152)
        at oracle.adfinternal.view.faces.renderkit.rich.FormElementRenderer.encodeAll(FormElementRenderer.java:164)
        at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:1627)
        at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.renderFieldCellContents(LabeledInputRenderer.java:228)
        at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.renderFieldCell(LabelLayoutRenderer.java:528)
        at oracle.adfinternal.view.faces.renderkit.rich.LabelLayoutRenderer.encodeAll(LabelLayoutRenderer.java:305)
        at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.encodeAll(LabeledInputRenderer.java:215)
        at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
        at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
        at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
        at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:405)
        at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
        at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer._encodeFormItem(PanelFormLayoutRenderer.java:1015)
        at oracle.adfinternal.view.faces.renderkit.rich.PanelFormLayoutRenderer.access$100(PanelFormLayoutR

javax.faces.FacesException: javax.el.ELException: java.lang.ClassCastException: model.AppModuleImpl cannot be cast to model.MantainScreenAppModuleImpl
at javax.faces.component.UISelectItems.getValue(UISelectItems.java:144)Can you check if there is some LOV which has issues in rendering in the MaintainScreen.jsff
See if the same is rendered fine from the BC4J AM tester , this will help to narrow down the issue.

Cannot publish to MobileMe?

Hi guys,
Have used Mobile Me in the past to upload iWeb sites with a movie. Usually no problem, but now it is saying that it has published, but when I try the link it says 'page not found'.
Also when I try to look at previous movie on a PC using Firefox or Internet Explorer, I can see the web page and the movie box, and can hear the audio - but no picture!
Please help - it is driving me mad!!
Stephen

Besides the wrong title of the post "Cannot publish to MobileMe?" (Yes you can) the question is:
why do you publish a wall-to-wall video (1280x720) of 53.2MB and display it as a thumbnail (533x300) on the page?
I exported it for iPhone and now the video is 480x270 and 13,4MB.
but on a pc - just audio, no movie
Might be this : [SOLUTION : Movie NOT playing on Windows PC|http://discussions.apple.com/message.jspa?messageID=10370447]

NW2004s SP12 - SP13: Model DC cannot publish Modelclasses to other DCs

Similar Messages

Maybe you are looking for