NW2004s SP7 Preview installation error, source.properties missing

dear sap
I got the error message
FSL-02015 Node c:\j\Sneak_Preview_Content\JAVA\SOURCE.PROPERTIES does not exist.
I linked some screenshots for your understanding.
<a href="http://itedu24.net/nw04ssp7/00Sneak Preview SAP NetWeaver 2004S SR 1installation.doc">00Sneak Preview SAP NetWeaver 2004S SR 1installation.doc</a>
*. haha, i created the empty file as "source.properties" .
but it doesn't work .. ^^
do you really miss it or ?
I made a mistake?
Thanks.
David

David,
I forgot;
FCO-00011
In this case, check the mapping of the hostname to the IP address with the following commands:
ping hostname
The system returns the IP address that is assigned to the host name.
ping -a <IP_Address>
The system returns the host name that is assigned to the IP address.
If the output of IP address and host name differs, correct the mapped IP address to the host name on the DNS Server or in the "hosts" file
James

Similar Messages

Sneak preview Installation error, file source.properties not found

Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. K

Hi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru

SAPNetWeaver 2004s sp7 preview installation mistry

Hi,
I am having issues installing SAPNetWeaversp7 preview installation. I downloaded all the files except TREX. I have extracted each in a different folder. I see that all the three folders have similar files....Please help me whats wrong with these files (Except the preview IDE folder)?
Thanks and Regards
Ayub

Hi,
Thank you very much for giving me the check list at the end !!!! I have completed the part1 installation successfully.
When I click Start > All Programs > SAP MMC console.
J2E Node is displayed. When I expand it, I see two instances SAP00(green),SAP01(yellow).
When I try to access http://localhost:50100/irj/portal I read the following:
Application stopped.
Details: You have requested an application that is currently stopped
please help me what to do next..
How to recheck if the following items are also installed ?
1)Visual Composer.
2)Content Management and Collaboration.
3)SAP NetWeaver Business Intelligence Java SDK.
4)Interactive Forms based on Adobe Software.
5)Composite Application Framework.
When I installed previously part1 finished successfully, when I clicked on Start > All Programs only SAP MMC was listed. What is the conclusion from this ?
Thanks and Regards
Ayub
Message was edited by: Ayub khan
Message was edited by: Ayub khan

NW2004 Sneak Preview installation

I am trying to install NW2004-SP16-Sneak-Preview on a 2 GB laptop with {Windows XP-MediaCenter Edition-Version 2002-SP2).
The installation finished successfully.The database and java instances have started successfully.
When we try to login like http://localhost:50000/irj, I get an error " 503 service unavailable
application stopped "
Details: You have requested an application that is currently stopped".
Does anyone has a solution to this issue?. is it any thing do to with the Media Center Edition?.
Any help is greatly appreciated.
Regards
Selvam

Hi Selvam,
Is the J2EE home page i.e http://localhost:50000 opening?
If yes, then probably the irj application might not be
running. Go to Visual Administrator usr/sap/.../j2ee/admin
go.bat -> server -> services -> deploy -> applications
and start the sap.com/irj application.
Regards
Srikishan

Netweaver 2004s Preview Installation Error - Any Help Appreciated.

Trying to install the Netweaver 2004s Preview Edition.
The following error (in the log file) occurs after pointing to the Java Cryptographic Extension Policy Archive (zip) file and clicking 'next'.
===============================================
ERROR 2007-01-04 00:26:04
FJS-00003 TypeError: this._name has no properties (in script NW_Java_OneHost|ind|ind|ind|ind, line 8987: ???)
ERROR 2007-01-04 00:26:21
FCO-00011 The step collect with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
===============================================
Any help is appreciated.
Rajendra.

Hi,
Drop me a mail to [email protected] I will send you the NW04s installation guide.
regards,
Ranjeet

SAP sneak preview installation error reg MaxDB

Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rte

Hi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas

Adobe Edge Preview installation error

I installed Adobe Creative Suite 6 through Adobe Creative Cloud. All of the applications seemed to install correctly, except Adobe Edge Preview, for which the following message was given.
Installation completed though some optional components failed to install correctly. More details.
The details page showed the following error.
ERROR: DW050: - DirectX: Install failed
Installation retry also failed and gave the same error.
What is the solution to fixing this error?

Thanks. The link you provided is to a PPT and WMA presentation about the DirectX 11 technology update. I downloaded http://www.microsoft.com/en-us/download/details.aspx?id=35, instead, installed it, and then ran the installation retry in Adobe Application Manager. Installation worked. Success.
To all, your prompt responses were much appreciated. Please consider this problem resolved.

OC4J Preview Installation Error

Hello,
I have downloaded the OC4J Developers Preview version (10.0.3.0.0) from OTN. Now, when I start the OC4J, I always get the following error on the console.
JspTagLibListener error : oracle.xml.parser.schema.XSDBuilder.
build(Ljava/net/URL;)Loracle/xml/parser/schema/XMLSchema;
Also, when I try to acceess the homepage of OC4J, I get the following error on the browser
Request URI:/index.jsp
Exception:
java.lang.NoSuchMethodError: oracle.xml.parser.schema.XSDBuilder.build(Ljava/net/URL;)Loracle/xml/parser/schema/XMLSchema;
Both the errors do seem to be related. I have not changed/updated any configuration files of oc4j yet. These errors occur in a clean installation.
Any idea how this can be removed?
Thanks in advance.

Hmm, that's the exact platform and JDK I'm using and I have no problems with the 1003 release. I've not seen anyone else ever mention this problem either.
Even though you're getting a funky taglib error, it still looks like it initialized -- can you hit the home page ad see if it works (http://localhost:8888) -- if so, do the JSP/servlet examples on the page work?
Has it ever worked for you or is this your first time trying it out?
Have you deployed any applications to it previously or configured applications?
If you extract the oc4j_extended.zip file to a different directory does it work?
Can you try it on another machine just to check?
That's all I can think of at the moment.
cheers
-steve-

Photoshop CS5 installation error "Archive part missing"

Photoshop CS5 download consists of two files: one is .exe and the other is .7z. I downloaded both but when I try to run the .exe file it gives the error message "Archive part missing." The archive is present and is in the same directory as the .exe file. I have successfully installed this software several times before without error messages. I am reinstalling it on my laptop after upgrading from WinXP to Win7 (and I did properly deactivate Photoshop before formatting the laptop's hard disk.) I have read the kb article at http://helpx.adobe.com/creative-suite/kb/start-installer-downloading.html and it didn't help. Now what?

Hi Junetvee,
I apologize i provided you the wrong link
Please use the below link
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Please make sure to complete the Very Important Instructions section prior to clicking on the download link.
Thanks

OUI installation error (emd.properties file location)

hi!
i'm trying to install new home (10g SE) in a SuSE linux server (which is already having another home (10g EE) running in a different path).
10g (10.2.0.3) Enterprise Edition home location:
$ORACLE_HOME: /app/oracle/product/10.2.0
I have giving the 10g (10.2.0.3) Standard Edition home path in OUI as:
$ORACLE_HOME: /opt/app/oracle/product/10.2.0
The OUI installer throws following error, once I click 'Next' past product specific pre-requisite checks (all passed).
"Error finding file /app/oracle/product/agent10g/sysman/config/emd.properties"
I really don't understand, why is this looking for this file. I believe this file is not related to the database but OMS. Moreover, I'm confused on how it's picking up this path (/app/oracle/product/agent10g/sysman/config) while my new home path is entirely different.
OMS agent is running in this server. Agent home is:
/app/oracle/product/10.2.0/agent/agent10g
Can anyone help on where I'm faultering?
Thanks!

AFAIK, 10.2.0.3 is only available as a patch on top of 10.2.0.1. Are you installing 10.2.0.1 ? Is there a reason for using a desupported version ?
Pl post the contents of the install log file - http://docs.oracle.com/cd/B19306_01/install.102/b15660/app_ts.htm#sthref1324
HTH
Srini

NW04s 07 java sneak preview installation error

Hi,
I am getting the following error when I am trying to install NW04s 07 java Sneak preview .
<b>ERROR 2006-09-20 00:15:09
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilRebootDrv' does not exist on the 'localhost' host.</b>
I have the localhost entry in the hosts.ini file and turned off Norton anti virus.
Appreciate quick response
Srini Sandaka

have a look may be it helps you
Re: Netweaver 2004s ABAP Sneak Preview
Regards
Subhash

Missing Connection Types in Report Data Source Properties

I am running three installations of SharePoint 2013 with SQL 2012 for Business Intelligence, with Kerberos working.
I have been having intermittent issues with SQL Reporting Services in a multi-server configuration, but finally had it working in all three environments. We discovered many of our issues were caused by master page customizations which we have now disabled
temporarily while we work on function issues.
However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened. Most everything appears to still be working, except Reporting Services. I have verified that features are enabled
in both the farm and the site collection, as well as insured managed content types are being allowed on the target document libraries. I also verified the Reporting Service properties and database connections. However, I have found two clear symptoms
which I can find no other information regarding (in logs or in online searches):
1) If we try to create a new "Report Data Source" using the SharePoint UI, it will open a new Data Source Properties window, but in the "Data Source Type" field, there are no values available for me to select my connection type (e.g.,
Microsoft SQL Server).
2) In Central Administration, while administering the Reporting Services Service Application, I can manage a majority of the settings, including System Settings, Manage Jobs, Key Management, etc. However, if I click on the link for "E-mail Settings,"
I get the dreaded "Sorry Something went wrong screen," with an error saying that "Object reference is not set to an instance of an object."
So I am hoping someone has an idea of where I can look for additional information on this issue, or even better, knows what I am missing to get Reporting Services functional again in this environment!
Thanks in advance for any help provided.
Elohir

However, we started having a new problem with Reporting Services on just ONE of the environments, and we are not sure what happened.
Hi Elohir,
I assume you are installing Reporting Services SharePoint mode for SharePoint 2013, you need to:
1. Install "Reporting Services – SharePoint" and "Reporting Services add-in for SharePoint Products" on the SharePoint server that the SSRS service will run on. All other SP servers only need the "Reporting Services
add-in for SharePoint Products."
2. Run the Insall-SPRSService and Install-SPRSServiceProxy on Central Admin and SSRS server.
3. Start SSRS Service only on desired SSRS servers.
http://msdn.microsoft.com/en-us/library/jj219068.aspx
Since the issue occurs only to one of the environments, please provide more information about your multi-server configuration, and point out the server where the issue occurs.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

Error saving Data Source Properties. - Base Exception. Call Oracle Support

Hi,
Oracle Application Server 10g Release 2 (10.1.2).
I tried to create new Datasource using OEM Console but it throws error as following :
Error saving Data Source Properties. - Base Exception: The Entity et="system";ei="0",et="application";ei="138",et="data-sources";ei="146":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: If possible, remove et="system";ei="0",et="application";ei="138",et="data-sources";ei="146":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; . Call Oracle Support.
May I know how to resolve this please ?
Thank you.
J.

Hi ,
Write following code in your UDF
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = <your query>;
try{
         channel =LookupService.getChannel(<comm channel name>,< business system>);
         accessor = LookupService.getDataBaseAccessor(channel);
         resultSet = accessor.execute(Query);
         if(!(resultSet.equals(null)))
                   Iterator rows = resultSet.getRows();
                   if (rows.hasNext()) {
                   Map rowMap = (Map)rows.next();
                   <your variable>.add(rowMap.get(<db field name>)+ "");
catch(Exception ex)
      result.addValue(ex.getMessage());
finally
          try
     if (accessor!=null) accessor.close();
          catch(Exception e)
     result.addValue(e.getMessage());
Thanks ,
Suvarna
Pls award pts if it helps .

Installation error: cannot find the data source checking utility (dbcheck)

BO XI 3.0:
During the process of installing "Dashboard and Analytics Servers", we've got this error.
Installation error: cannot find the data source checking utility (dbcheck)
Have anyone encountered this issue? We can't move on after this error.
Thanks,

I've fixed the problem.
Lianjun.
Lianjun (guest) wrote:
: I've tried to run the latest beta version of OMWB to migrate
from
: MS SQLSERVER7.0 to Oracle8i. At step 4:Source Database Details,
: every time I put in the data source name (which is in the
control
: panel-ODBC data source Administrator), it gave an error message
: that Data source name not found and no default driver
: specified).Anybody has any ideas?
: Thanks for the help!
: Lianjun.
null

NW2004s SP7 Preview installation error, source.properties missing

Similar Messages

Maybe you are looking for