NW6.5 FTP-file-mismatch with FTP over TotalCommander

Hello *
We use the FTP-Service within the TotalCommander-Program (TC from
www.ghisler.com) to access a NetWare-NSS-Volume.
Some filenames contains periods and space characters also
(e.g. "1.2 Chapter x.pdf".)
After a couple of weeks (~80 days) the displayed file-name changes: This
happens within the TC-FTP-access only. All other access-methods (MS-FTP;
Novell-NetStorage; NCP - Windows-Explorer) are showing the name correctly.
e.g.
access over NCP, MS-FTP, NetStorage | access over FTP within TC
displayed filename |(after ~80 days) displayed filename
------------------------------------|----------------------------
"2.1 Chapter ONE.pdf" |"Chapter ONE.pdf"
This happens from every PC at the same time, so there have to be some
changement on the NetWare-Server.
Volume compression is disabled (nssmu.nlm)
We have to copy or open and save the file again to get rid of this for
the next ~80 days ...
Any idea?
oskar

Thank you - Andrew,
yes, SOPHOS-Anti-Virus is installed, and there is a regularly Backup-Job
also. But both are running weekly ...
Anyway, we have to move the data to a new OS ... (could be a solution
for this ...)
By the way, Symantec-Backup-Exec-Support told me, that restoring the
trustee-rights (from a NetWare-NSS-Volume-Backup) to a OES-NSS-Volume is
not supported ("reason: ... it is another OS!").
Can you recommend a smooth method to move the data from NW to OES?
Kind regards
Oskar
Am 01.02.2012 22:56, schrieb ataubman:
>
> OK, well that's fine. I have no idea what your problem is, there is no
> automatic process on NW that runs every 80 days. The closest I can think
> of would be the NSS background check; Normally it runs 5 days after the
> server comes up and every two weeks thereafter.
>
> Do you have perhaps an anti-virus or backup that runs a scan regularly
> over the volumes at that interval?
>
> That aside all I can suggest is a rebuild:
>
> nss /poolrebuild /purge
>
>

Similar Messages

  • Sending XML file from SAP to Windows Based file server with FTP function

    Hi Gurus,
    We are using SAP BW 3.0B version.
    I need to convert data in ODS to XML format and send this XML file to remote server which  is not a SAP application server, it is just a Window Based file server with FTP function..
    By writing some ABAP code I have converted ODS data into XML format (which gets saved in my local system)
    (Is that I need to put this file in Application Server to send it to the other servers? )
    Now the thing is how I can send this file to that Windows Based file server.
    plz suggest me.... what can be done......
    Thanks in Advance
    Madhusudhan
    Edited by: Madhusudhan Raju on Dec 3, 2009 4:25 AM

    I dont think the above code support windows OS. Because I always execute this script via UNIX.
    I think you can try this option, go to command prompt, goto the destination path where you have an XML file using cd....
    ftp (destination servername), specify the username and password.
    afterthat, use the command put and filename.
    check whether the file had reached destination successfully or not.
    For automation purpose, you can use the following script like
    ftp: -s: test.txt  (servername)
    In test.txt,
    UserName
    Password
    bin
    cd /files
    put file.xml
    bye
    Also, you can check in SM69, there will be some SAP external commands to automate the file transfer.
    Thanks
    Sat
    http://support.microsoft.com/?kbid=96269

  • File Matching with FTP Adapter

    Guys,
    I have particular requirement where FTP Adapter needs to read set of files
    FILENAME.PCL
    FILENAME.I01
    the file name would be matching but extensions are different.
    the adapter needs to read the file match if they are SET of files ( based on file name) and move into target directory if not move into Error Directory .The Data needs some manipulation before it's written into target location so we are using ESB ( also for error notification) is it possible with FTP Adapter within ESB?
    Thanks

    May be difficult with ESB, may require BPEL. Can you give a specific example as that would make it easier to see what you mean.
    Antony

  • Changing oracle file permission with ftp / sql

    Hi, i have a question:
    I've configure webdav to browse my /i folder.
    I can use as well filezilla, connecting with hostname / uname: system / pass / myoraclesystem pass.
    Is there a way to change file permission attributes with ftp?
    Thank you

    Hi,
    Check out ORDSYS.ORDImage type from Oracle Intermedia, and especially its "process" method.
    It possesses various commands to change image properties.
    HTH.

  • Moving big files(600MB) with FTP Adapter error The IO operation failed

    I everybody, I have the next trouble:
    I need to move big files from one server to another remote server through ftp protocol. All the configuration is correct and I am able to move little files
    with no problem, but when I move big files the server shows the next error:
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'readEBS'
    failed due to: The IO operation failed. The IO operation failed. The "OPER[NOOP][NONE]" IO operation for "/tmp/TestLogSOA/DetalleCostos3333333.dvd"
    failed. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_NOTA start() failed on
    resource 'SOADataSource_ohsdomain': XAER_NOTA : The XID is not valid oracle.jdbc.xa.OracleXAException at
    oracle.jdbc.xa.OracleXAResource.checkError(OracleXAResource.java:1532) at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:321) at
    weblogic.jdbc.wrapper.VendorXAResource.start(VendorXAResource.java:51) at weblogic.jdbc.jta.DataSource.start(DataSource.java:722) at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1228) at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1161) at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:297) at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:507) at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:434) at
    weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1592) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1496) at
    weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:439) at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396) at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:355) at
    oracle.integration.platform.xml.XMLDocumentManagerImpl.getConnection(XMLDocumentManagerImpl.java:623) at
    oracle.integration.platform.xml.XMLDocumentManagerImpl.insertDocument(XMLDocumentManagerImpl.java:208) at
    sun.reflect.GeneratedMethodAccessor1534.invoke(Unknown Source) at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at
    org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149) at
    org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106) at
    org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171) at
    org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204) at $Proxy285.insertDocument(Unknown Source) at
    oracle.integration.platform.instance.store.MessageStore.savePayload(MessageStore.java:244) at
    oracle.integration.platform.instance.store.MessageStore.savePayloads(MessageStore.java:99) at
    oracle.integration.platform.instance.InstanceManagerImpl.persistPayloads(InstanceManagerImpl.java:773) at
    oracle.integration.platform.instance.InstanceManagerImpl.persistReferenceInstanceBean(InstanceManagerImpl.java:1106) at
    oracle.integration.platform.blocks.adapter.AbstractAdapterBindingComponent.createAndPersistBindingInstance(AbstractAdapterBindingComponent.java:502)
    at oracle.integration.platform.blocks.adapter.AdapterReference.createAndPersistBindingInstance(AdapterReference.java:356) at
    oracle.integration.platform.blocks.adapter.AdapterReference.request(AdapterReference.java:171) at
    oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139) at
    oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179) at
    Thanks!!!

    Hi idavistro,
    You can try setting the XA Transaction Timeout for SOADataSource.
    1. Log in to the WebLogic Admin Console.
    2. Select in the left tree: Services-> Datasources-> SOADataSource->Transaction.
    2. Select Set XA Transaction Timeout.
    3. Set XA Transaction Timeout to 0.
    4. Restart the server and check if the error still appears.
    Regards,
    Neeraj Sehgal

  • FTP/File adapter with Fixed Position File Format

    Hi All,
    Can any one guide me how to deal with the fixed position files while using File or FTP adapters?
    Thanks In advance

    Hi,
    Have a luk at the below link it has gud examples:
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/nfb.htm#CCGIBHFH

  • File Sharing with PCs over wifi

    Hello,
    I have just set up a mac mini as a home server, primarily for file sharing. It works fine when the mac is plugged into the router by ethernet, my two PCs can connect to the mac's local IP address and can access the drives, but they cannot access the mac's wifi IP, so I can only use it as a server when it is plugged into the router, which is something of a limitation regarding placement.
    It's a brand new mac mini 2.5 GHz, with OSX 10.8.4, with OSX server, and the PCs are both Windows 7.
    I can't tell if it is a problem with the mac or the PCs, I've swapped the IPs of the wifi and ethernet interfaces and still the PCs could only access the ethernet.
    I hope this is enough to go on.

    As a guess...  Are the WiFi and the wired networks configured in different IP subnets (as would be typical when there's more than one network connection on a host) or is the WiFi device configured as an access point (which would disable IP routing on the device, and rendering it effectively transparent to IP traffic)?

  • Cant do a file get from external server using file sender adapter with ftp

    Hi all,
    Up until now our company has only used the file sender adapter with ftp protocol to get a file from our XI server for processing and input the file into an integration process
    I have a requirement to do an ftp file get from an external server
    From our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...).  So all firewall issues and communications are fine
    Unfortunately I cannot currently pull files from the external server using the XI file adapter with ftp protocol from the XI development server AWB017
    FTP Connection Parameters: External server name using port 21, Data Connection is Passive, No security, I supply a userid and password
    Processing Parameters: Processing Mode is Archive (I tried test but this did not work either)
    No messages appear in the RWB
    Is there something else that I need to set up in order for the external ftp get to work via the XI file adapter?
    Regards,
    Mike

    Thanks for your responses.
    I have found the error messages in the File Adapter Monitor
    Scenario 1
    When I prefix the source directory with a forward slash, eg <b>/Folder/Subfolder</b> the error message is as follows
    <b>EST: Error: Error connecting to ftp server 'ip address': FTPEx: /Folder/Subfolder: The system cannot find the path specified</b>
    Scenario 2
    When I DO NOT prefix the source directory with a forward slash, eg <b>Folder/Subfolder</b> a different error message is returned
    <b>Error: Retrieving file 'FILENAME.XML' failed unexpectedly: FTPEx: Folder/Subfolder: The system cannot find the path specified</b>
    At least in this scenario the adapter has been able to identify the file on the external FTP site but cannot retrieve it
    Questions
    I thought that the backslash prefix for the source directory was mandatory but I am receiving an error in each scenario
    I receive the same error message whether the Processing Mode is 'Archive' or 'Test'
    The logs on the external ftp server seem to indicate that I am simply connecting, sending username and password then quiting straight away. I am not issuing any commands that they can see
    I thought that being a Sender adapter it would inherently execute a Pull or Get command
    To recap, from our XI development server I can ftp directly to the external server and view the required directory using the command window via a DOS prompt (FTP open ...). So all firewall issues, communications, userid and password are fine
    Has anyone experienced these issues?
    Please advise on next course of action?
    Regards,
    Mike

  • Duplicate file with FTP sender

    hello everybody,
    i have the "Duplicate file problem with FTP sender " with my XI 3.0 sp23.
    So sometimes my file adapter load 2 times the same file.
    I found this link :
    http://wiki.sdn.sap.com/wiki/display/XI/DifferentwaystokeepyourInterfacefromprocessingduplicate+files
    with some interesting solutions for fix the problem.
    But my question is:
    Are not a standard solution or a SAP hotfix?
    My chance is just implement one of solution proposed in link?
    thanks in advance
    Alex

    Hi,
    You can use any of the solution according to your requirement.
    In one of my scenario i used solution 1 (module creation).
    In XI3.0 i think there is no sap standard fix for this issue (but i am not sure).
    Regards,
    Shradha

  • Steps for File Transfer through FTPS...!!!

    Hi ,
    Can anyone please tell the steps for file transfer with FTPS.
    Does PI file adapter has bulilt in feauture to handle this? or
    Do we need to deploy anything to handle this?
    Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
    Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
    File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
    Please suggest me.
    Thanks
    Krupakar

    Hi Shabarish,
    We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
    Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
    Ip: XXX.YY.YY.ZZZ
    Port: 990
    User and pwd.
    and I am getting the same below error
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
    I tried by selecting different options like
    1. Without selecting the X509 certificate for client authentication.
    2.  Keystore as TRUSTED\view\entry-cert
       X509 certificate and private key as TRUSTED\view\entry-cert
    3. Keystore as TRUSTED\view
      X509 certificate and private key as TRUSTED\entry-cert
    4.Keystore as "view"
      X509 certificate and private key as "entry-cert"
    Please help me in this.
    Thanks
    Krupakar

  • Can't put files with FTP

    I’m trying to transfer a site with Dreamweaver 8
    (Windows) to CrystalTech. I can connect and transfer files okay
    with WS_FTP. Hitting the “Test” button in
    Dreamweaver’s site definition dialog returns a successful
    test. But when uploading the site, the usual progress bar appears
    and disappears rapidly, and no files are transferred. There is no
    error message. The Dreamweaver FTP log is empty. This is the first
    time I have tried to use Dreamweaver’s FTP to transfer a
    site, although I have put files over the LAN before. Here is the
    site definition remote info:
    Access: FTP
    FTP host: josephherl.org
    Host directory: [blank]
    Use passive FTP is checked [as instructed by
    CrystalTech’s website]
    Under “Server Compatibility,” “Use FTP
    performance optimization” is checked, “Use alternative
    FTP move method” is unchecked
    Edit | Preferences | Site | Firewall port is set to 21
    For what it’s worth, the testing server is set up on my
    local machine and works fine. The machine is at my university.
    I have tried:
    using the IP address for the FTP host;
    specifying a host directory [CrystalTech’s website
    says to leave it blank];
    unchecking “Use passive FTP”;
    changing the settings under “Server
    Compatibility”;
    disabling Windows Firewall; and
    double-checking that the local root folder is correct.
    Thanks in advance for your help.
    Joe Herl

    Do you need a testing server? That is, are you building PHP
    pages?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Joe Herl" <[email protected]> wrote in
    message
    news:ecvl5g$bjp$[email protected]..
    >> HOw do you have the three parts defined in DW (local
    site, remote site,
    >> and
    > > testing server)?
    >
    > Right now I have this:
    >
    > Local info:
    > Site name: Music 313
    > Local root folder: C:\htdocs\chmu313
    > Refresh local file list automatically is checked
    > Default images folder is empty
    > Links relative to document is selected
    > http address:
    http://josephherl.org/chmu313
    [I left it blank;
    > Dreamweaver
    > filled it in automatically when I saved the settings]
    >
    > Remote info:
    > Access: FTP
    > FTP host: josephherl.org
    > Host directory: chmu313/
    > Login: chmu313
    > Use passive FTP and Maintain synchronization information
    are checked
    >
    > Testing server:
    > Server model: PHP MySQL
    > Access: FTP
    > FTP host: josephherl.org
    > Host directory: chmu313/
    > Login: chmu313
    > Use passive FTP is checked
    > URL prefix:
    http://josephherl.org/chmu313
    >
    > [All the information in the "testing server" category
    was filled in
    > automatically when I selected FTP under "Access."]
    >
    > The above configuration works. My previous configuration
    was the same for
    > "local info" and "remote server," but I had the
    following under "testing
    > server":
    >
    > Server model: PHP MySQL
    > Access: Local/Network
    > Testing server folder: C:\htdocs\chmu313\
    > URL prefix:
    http://localhost
    >
    > That configuration did not work.
    >
    > Joe
    >

  • How can I set-up to receive a file with FTP?

    I want to receive a .pdf file from another, but the file is rejected by my email service provider for size.  What are the requirements and steps for arranging to receive this large file using File Transfer Protocol (FTP)?  I'm using OS Snow Leopard 10.6.8 with a DSL Internet connection nominally at 10 MBs download.

    Daniel Lichtenwald wrote:
    What are the requirements and steps for arranging to receive this large file using File Transfer Protocol (FTP)?
    Usually, we don't speak of "receive" when using FTP, since the file is transferred from server to client, so it's more of a case of "download".
    At your end, it's simple. You use an FTP client; under SL, that includes Finder and Safari, so you don't even need to get any additional software.
    At the other end, it's more complicated; the 'sender' must set up an FTP server on his machine.
    Alternatively, you can set up your own Mac as an FTP server, and have the 'sender' connect to you with an FTP client and upload the file; but, if your Mac lives behind a router, then you have more work to do with the router settings.
    That's why it's much easier to use the file sharing services mentioned above -- if they are available in both sender's and receiver's locations. (Keep in mind that some countries block access to all those mentioned -- except perhaps <www.transfer.ro>, of which I know absolutely nothing.)

  • Need help with a simple process with FTP Adapter and File Adapter

    I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
    I can provide additional info such as the contents of my bpel and wsdl files if needed.
    Would appreciate if someone can help me with this at the earliest.
    Thanks
    Jay

    persiandude wrote:
    Topic: Need help with if, else, and which statements and loops.
    How would I display 60 < temp. <= 85 in java
    System.out.println("60 < temp. <= 85 in java");
    another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
    Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
    [http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
    jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
    JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
    Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
    Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
    Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
    James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

  • Is CPA Cache refresh linked with  ftp or file pooling process in XI?

    Hi,
    I have a file to file scenario using Transport protocol as FTP in XI 3.0 SP 15.
    When we try to sends some file using ftp protocol where we are using
    FTP  connection parameters
    Server                          = <CORRECT IP>,
    Port                               =  21 ,
    User name                <CORRECT NAME>,
    Password                  <PASSWORD> ,
    Data Connection           = Active
    Connection Seq          = None
    Connection Mode          = Permanently
    Transfer Mode            =   Text
    Processing Parameters
    Quality of Service    = Exactly Once
    Pooling Interval        = 1 sec
    Processing Mode    = delete
    File Type                   = Text
    File encoding           = utf-8                 
    The problem we are facing like some time the ftp is not working even the file is present in the location for pick up. If few files are stacked up to be collected then when we are using CPA Cache refresh in Full mode manually then it fetches all the files from the location but the problem is that ,we have a time constraint for this process to be completed in just 60 seconds if we are not able to pick up a  file in 60 Secs then the file will be treated as invalid.
    So I just want to know how Manual CPA CACHE refresh in full mode generally solve the problem.
    Next if more files will be stacked up then cache refresh also failed to solve the problem and more cache refresh result in NOT pooling any other files in XI including the above discussed flow.
    So,in anyway Cache refresh linked with ftp or file pooling process in XI?
    Please assist me in correctly understating the whole problem and what solution could be put to solve this.
    Thanks,
    Satya
    Edited by: Satya Jethy on Mar 14, 2008 12:28 PM

    Hi Suraj,
      If you see my query i have mentioned that the pooling interval is 1 Second.
    If we are not able to pick the file with in 60 Secs as this is a  real time scenario so the file will be treated as a invalid file.
    Moreover this problem is happening some time.
    I have also checked the component monitoring it is saying everything is ok as because we are receiving the file with out any error and the file transfer is also success.The only problem is that it is not collecting the files from the given location.
    Hope i make you understnad the problem .If not please revert back i will try to explain once again.
    Thanks,
    Satya

  • File import with OS command on FTP receiver adapter

    Hi gurus,
    I would like to write a script ("Run OS command before Message Processing")for importing a file from a FTP based on a condition, like if file_a.txt does not exist on folder RECEIVE/TXT than import file_a.txt from location IMPORT/TXT to RECEIVE/TXT.
    please provide me with some information regarding this issue.
    My OS is windows NT.
    Thanks

    If I don't understood wrong, the script can be something like follow:
    set filename=text.txt
    cd /directory1/
       IF EXIST %filename% (
            # FTP 2
            ftp <serverdest_1>
            mput %filename%
        ) ELSE (
            cd /directory2/
            # FTP 2
            FTP <serverdest_2>
            MPUT %filename%

Maybe you are looking for

  • Can't open iPhoto after downloading yosemite app

    I have an IMac, and have recently downloaded the Yosemite app. Was not able to open iPhoto so I downloaded the iPhoto app. Now the slash on the iPhoto icon on the dock is gone, but when I try to open iPhoto I am directed to download the iPhoto app ag

  • Mapping Issue in Triggering Email

    Hi All, I am having problem in PI Mapping. Requirement: Trigger an email target structure only if ReturnCode is not equal to 0 and 1. Source Structure                                                                                Target Structure Inv

  • Drill through report - Essbase Studio

    Hi, Need some help on drill through reports. I have created a drill through report in essbase studio. I am able to drill down to the source table in SmartView. But the problem is, when I drill, it is showing me all the records in the table instead of

  • Play audio in Finder?

    In OS 10.4, I could play an audio file in a column view Finder window. In 10.5, I only get some goofy generic icon. What happened? How can I get OS 10.5 to play audio files in the Finder window like 10.4 did? If there is no preference setting that wi

  • MAC pro 2013 model not detecting E122 USB Modem

    Hi, For some reason, the light of USB modem doesnt glow, and neither is it detected. But when the Mac is restarted, the USB Modem does lit, and shows signs of being detected. Tried downloading Mobile Partner, but since the Modem is not detected, noth