NW7.0 install under linux - Rapid Installer

Hello,
I tried to install NW7.0 SR3 (SPS14) under OpenSUSE Linux 11 with a Rapid Installer package.
The installation routine started and the first screen was shown (installation type). I marked the rapid installation of NW7.0 and clicked next. A few seconds later a message was shown with the information:
"This computer's hostname is 'linuxportal.mydomain.de'. but a reverse lookup returned 'linuxportal.mydomain.de'......SOLUTION: Insert a line: '10.20.30.40 linuxportal.mydomain.de' into the host file '/etc/hosts' and then continue with the installation."
I added this line to the file, restart the server and the same messagebox was shown in the same installation step.
A nslookup command on teh console gave the correct mapping of the hostname to the ip-address. a o´ping on the ip-address and on the hostname was successful.
What can I do th solve this installtion problem? Any ideas?
Thanx
Andreas Gräbnitz

ok, I think, I have solved the problem. It is necessary to add two lines in the /etc/hosts file, one with the real ip-adress and the hostname and one with the ip-address 127.0.0.2 and the hostname - like this
10.20.20.40 linuxportal.mydomain.de
127.0.0.2   linuxportal.mydomain.de
Good luck,
Andreas

Similar Messages

  • Error when Installing NW04 using Rapid Installer:FJS-00003  ReferenceError

    Hi friends,
    As a part of Portal migration, i am installing NW04 using Rapid Installer 2.5.1 for SunOS.
    Installation went fine till phase "Database Oracle Patch" but in "Oracle Sidadm Env" phase, an error occured.
    Acc. to sapinst.log file:
    FJS-00003  ReferenceError: mgt is not defined (in script InstallationScript_10, line 12689: ???)
    I searched in SDN and found SAP Note 785921 and 668604. Both are asking us to do the same thing i.e.
    After the following line in control.xml
    "OraJ2ee.prototype.CreateProfilesFromTemplate = function() { "
    insert the line
    var mgt = new FileMgt();
    I did the same but no luck. I stopped the installation and again started it to see if it works but again the same thing.
    Can some one just tell me how to get rid off it?
    Regards,
    Nilz

    Hi Asshish,
    After installing the oracle database did you check whether JDK version is correct in the environment variables before installing the rapid installer.
    What happens is that oracle resets the JDK version to lower version, which is not acceptable to portal. So after installing the oracle verify the version of JDK in the Environment variables and the JAVA_HOME variable.
    Then you try to install the RI 2.5.1
    Regards
    Arun

  • Having trouble getting CF11 to install under Linux

    Hi,
    First, apologies if this (or a similar version) ends up posted here twice.
    I am trying to install CF11 (ColdFusion_11_WWEJ_linux64.bin) on a Scientific Linux machine and am getting the following, as it craps out:
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    Launching installer...
    JRE libraries are missing or not compatible....
    Exiting....
    My java version is:
    java -version
    java version "1.7.0_71"
    OpenJDK Runtime Environment (rhel-2.5.3.1.el6-x86_64 u71-b14)
    OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
    Do any of you have any suggestions as to what I need to do to get this to install?
    Thanks,
    Steve

    Well, this apparently was a bizarre failure mode when /tmp got full.  By setting IATEMPDIR to something with more space, I was able to get this to finish.  Have to say, that was not intuitive.  :-\
    Steve

  • Net configuration assistant fail on install under linux

    Hi,
    after a crash of our server. I tried to install oracle 9i release 2. Everything is working, but on install die net configuration assistant failed. How can I start it up after install? The database is already created by the installer.
    thanks a lot,
    Remco Ploeg

    Your locales are cooked. Use dpkg-reconfigure locales, select your local language (both en_US versions for me), C as your default, and you should be set.

  • Is it always necessary to patch Oracle when installing under Linux?

    I did a search first and, yes, I checked http://www.puschitz.com/.
    Everything I have seen to this point suggests Oracle cannot be installed without patching it first, even if it certified for that platform.
    Please advise.

    Anser is NO, the oracle 8.0.5 can be installed on redhat 5.2 without any patch, the oracle10g can be installed on redhat EL3 without any patch too. Those version of oracle with those version of Redhat linux are standard couple. Though something need a little skill to fix such as the ora8.0.5 precompile need some fix on redhat 5.2. Ora8i and Ora9i having too much bugs, after the patch, the bug will be bigger than before. However the Ora10g is good, the only problem is user SYSTEM seems having control right problem, but we can using user SYS replace SYSTEM user.
    Does any one have other idea?

  • TREX problem: Rapid Installer 2.0

    First I try to install EP 6.0 SR1 with Rapid Installer 2.0, I got an trex error in the installation. In this forum (read by Nicky Gromeleit) I got the information that installing TREX in rapid installation is not possible so I try again the following steps:
    1) Install only EP platform succesfully
    2) Install TREX manually succesfully
    3) I have configured IIS 6.0 for TREX
    4) After entering the name server adress in the SAP J2EE Engine Adminisatrator Tool I got only com.sapportals.wdf.WdfErrors in the TREX monitor, although the adress and port is correct. I use the url which you can see in "settings/ Landscape Overview" after starting trexgui.exe.
    Did I forget something or must I change something else?
    Regards,
    Frank

    Hi Frank,
    I had the same problem in the rapidinstallation, but the installation of Trex manualy works fine. I used the port, witch you can find opening 'Drive:\usr\sap\TREX_<Instance>\sapprofile.ini' at line 'TREX/NameServer/Port'
    In the Visual Administrator "-> Server 0 -> Services -> TREX Service" I changed the
    Parameter 'nameserver.address' in my case to 'tcpip://localhost:port'
    Nothing else is to do. So I did nearly the same as you, but maybe the port differs.
    Greetings,
    Axel

  • JCOP tools under linux - no readers detected for activation

    [eclipse 3.1.2, pcsc-lite 1.4, redhat el3]
    I just downloaded the JCOP tools as described in the following post:
    http://forum.java.sun.com/thread.jspa?forumID=23&threadID=722788
    I found that it would not install under linux, because win32 has been specified in the site and feature manifest files. When I removed these entries, it installed OK.
    Now, when I attempt to activate using my "engineering sample" card, the activation wizard notifies me that no PC/SC readers were detected. I'm puzzled by this, since pcsc-lite (1.4) is working well on my system, and I can see the reader & card being detected in pcscd's log. I have also been careful to ensure that eclipse knows about the shared library paths and I've even included jpcsc.jar as an extra library.
    If anyone else has JCOP tools working under linux, I'd appreciate any insights that might help. My issue may be simply that I have downloaded a custom windows distribution (tools.zip) - hence the manifest hack - perhaps there is a linux one?

    Could be the pcsc-lite 1.4 version the problem?
    http://forum.java.sun.com/thread.jspa?forumID=23&threadID=688560PC/SC Support (Linux)
    JCOP Tools only works with pcsc-lite 1.2.0.

  • Rapid Installer ESS / MSS

    We installed Portal using Rapid Installer. SAP Netweaver 2004s EP 7 SP11 with ESS MSS Scenario. I do not know what version of ESS MSS version it is. I am expecting it to be ESS MSS 1.0.
    Now with respect to SCAs for the code when I navigate the CMS screens I see ESS MSS 700. But when I try to download SCA's the latest release I see is ESS MSS 600. Any body know about the actual version of SCA's that I should be using keeping in mind of the Rapid Installer.
    Any help appreciated.

    Thanks for confirning chitti. I also felt the same.
    1- Does this include backend(SAP r/3)configuration as well?
    2. in addition to basic ESS and MSS like pers data,address, family details, bank ...they want benefit module to include as well.
        which will be the best approach (ABAP-webdynpro / Java Webdynpro).

  • Cannot install JMF under Linux Mandrake 10

    I simply cannot install JMF under the Mandrake 10 Official Linux distribution. I downloaded the jmf-2_1_1e-linux-i586.bin file and tried to execute it as root. It unzipped some files then showed me an error message about AWT and GTK+. I found a hack consisting of modifying the .bin file to have the PATH variable point to SUN JDK, the error does not show up, but the installation still does not work. In fact, the installation works, but the Diagnostics applet keeps telling me than class files are not present. My Mozilla 1.6 Java plugin is working and displaying the applet. My JMF lib directory does not contain sound.jar, such jmf.jar. I set the CLASSPATH and LD_LIBRARY_PATH according to the readme.html file. I would like to know if it is a compatibility problem with Mandrake 10, the 2.6 kernel or if JMF just DO NO work under Linux. In the latter case, JMF is a violation to the Java portability philosophy and I would never use it on my own initiative, just if I were asked to.
    After the files are unzipped, I have the following warning and error messages.
    Warning:
    Name: HorScrollBar
    Class: XmScrollBar
    The specified scrollbar value is greater than the maximum
    scrollbar value minus the scrollbar slider size.
    JavaSound Capture Supported = true
    JavaSoundAuto: Committed ok
    java.lang.Error: Can't open video card 0
    java.lang.Error: Can't open video card 1
    java.lang.Error: Can't open video card 2
    java.lang.Error: Can't open video card 3
    java.lang.Error: Can't open video card 4
    java.lang.Error: Can't open video card 5
    java.lang.Error: Can't open video card 6
    java.lang.Error: Can't open video card 7
    java.lang.Error: Can't open video card 8
    java.lang.Error: Can't open video card 9
    Done.
    Even if I do not have a working video capture card (I have an ATI All-in-Wonder 128 but it is not working under 2.6 kernel), JMF should work because some people do not have a video capture card. I also tried with the cross-platform ZIP file, but this one does not contain sound.jar either and the Diagnostics applet keeps complaining about missing class files. I tried to search on the Web for solutions to this problem or for a way to change the CLASSPATH used by the Mozilla Java plug-in (if it uses a different CLASSPATH than the one from the environment variable), but nothing, nothing. Is there a distribution from which JMF would work better than Mandrake 10? Or can JMF work only under Microsoft Windows or Sun Solaris? I also tried Blackdown, but a README file directed me to the Sun's page, nothing to download here about JMF.

    well, your not the only one.
    I have it working in Debian, and JDS.(JMF is setup automatically in JDS).(2.6.6 kernel)
    I looked at the installation structure of JDS, and was able to duplicate what they did for Debian.
    Maybe it will work for Mandrake two??
    ok, all you have to do is copy or create soft links from your Mozilla directory, just like you did with the java plugin, and link to all the *.so files in JMF-2.1.1e/lib directory.
    Should work.
    I also read that not haveing the native files only matters if you are doing Capture. not play.
    to get your ATI All-in-Wonder 128 to work, make sure you install the correct driver, and have it working under linux, then try it in JMSTUDIO

  • Failed to install enterprise manager under linux

    When I installed Oracle 10g(10.2.0.1) under linux, I got an error when running
    /ora01/db/oracle/product/10.2.0.1/bin/emca within oracle universal installer.
    The emConfig.log file shows such error:
    oracle.sysman.emcp.exception.EMConfigException: Invalid value null for parameter PORT
    at oracle.sysman.emcp.ParamsManager.checkParam(ParamsManager.java:2630)
    at oracle.sysman.emcp.EMDBPreConfig.checkConfigParams(EMDBPreConfig.java:1285)
    at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1060)
    at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
    at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
    at java.lang.Thread.run(Thread.java:534)
    So I have to run emca after the oracle installation. I am new to this tool. I modified both tnsnames.ora and listener.ora file to set port to 1521. And then I run emca -config all db,
    but now I cannot pass "entering the password for SYS user" (I already set SYS user's password to oracle, and it works when using sqlplus.) .
    I am totally confused. What should I run emca to set up the enterprise manager's website? Now I can use localhost:5560/isqlplus and localhost:5560/isqlplus/dba.
    Many thanks!!

    I just run emca as oracle instead of root, then the password got passed, but I got new errors:
    Aug 30, 2007 5:59:59 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
    What should I do? Is running emca -config all db necessary to get enterprise manager installed?

  • Oracle 9i Installation under Linux

    I am trying to Install Oracle 9.0.1 under Linux.
    During the Installation Process it has given some
    error as follows..
    ERROR in invoking target install of makefile
    /home/oracle/OraHome1/plsql/lib/ins_plsql.mk
    and also for sqlplus and ldap etc, etc.
    I ignored those and after 100% completion
    its going into a window and saying Configuring NetAssistant and its going into a loop somewhere because its not coming out from that loop even after several hours.
    Can you suggest something.
    Thanks and Regards.
    Keshav

    Check the url of SuSe :
    http://www.suse.com/us/support/oracle/index.html
    I guess you're trying to install on SuSE 7.3. Is that right ?

  • Problem installing language pack manually under Linux

    I had downloaded Asian language pack to be install under Ubuntu Linux. When ran the installer script using sudo I been prompted to enter the path where Adobe Reader was installed.
    The problem seems to accept path name that have the word "acroread" only as the default option was under /opt path. My installation was under /usr/lib32/Acrobat/Reader8/bin and the installer script does not recognize that.
    Help needed here. Thanks

    Hi,
    If you used the standard installation for reader, the path should have been /usr/lib32/Adobe/Reader8/bin and not /usr/lib32/Acrobat/Reader8/bin. Could you confirm how you performed the installation?
    The solution is to uninstall and re-install the reader using the standard location. We highly recommend that you install under /opt if it's a system-wide installation. Installing under /usr/lib32 seems strange given that the reader consists of more than just libraries.
    If that's not possible, you can fix it by tweaking the INSTALL script that is part of the language pack installer. Change line 198:
    from:
    198 if [ ! -d "$dir/Adobe/Reader8/Reader" -o ! -d "$dir/Adobe/Reader8/Resource" ]
    to:
    198 if [ ! -d "$dir/Acrobat/Reader8/Reader" -o ! -d "$dir/Acrobat/Reader8/Resource" ]
    and specify /usr/lib32 as the path of installation when prompted.
    Let us know how you progress.
    Gaurav

  • Java installation under Linux

    Hi
    I've got a problem with the installation of somme Java Packages under Linux.
    What must I do with the "*.jar" file? I wont to install the neu Open Xchange Server under SuSE 9.1, but there are somme Problems with the Java Packages!
    Can someone help me???
    Thanks a lot!!
    Dambi

    Hello Ishan,
    The J2EE server is not starting because of the error in A. Please refer to note 965451 for solution.
    The warnings in part B are insignificant. The startup framework has list with profile parameters and when a parameter is not in the list complains with warning. This warning doesn't mean that the parameter is wrong!
    The jcontrol is the parent process of the server process and if the server process dies you will always get error message there.
    Regards,
    Ventsi Tsachev
    Technology Development Support (J2EE Engine)
    SAP Labs, Palo Alto, Ca (USA)

  • Problems with installation under Linux

    I try to install Portal 3.0.6 under linux, but it always says on the end of the install that the SSOHash class was not loaded and that the WWSEC_ENABLER_CONFIG_INFO$ table is empty. The install l9g shows a message that it couldn;t allocate space in lrage_pool, but I allocated much more space in this pool than the requirements said and it still doesn't work. The installation is mess,
    Anybody has a clue?
    Thanx!

    loadjava expects ksh to be on the system. Obviously, you won't have ksh on your Linux box.
    Perform a symbolic link from bash to ksh and it'll work just fine.
    Logan
    null

  • Installed Netweaver 2004s with Rapid Installer , can not connet to BI7.0!!!

    Hi,
    I installed Netweaver 2004s with rapid installer but i can not connect to BI7.0 with SapLogon 710. SapLogon waiting for response forever. What are the post actions after I installed the Netweaver 2004s. I can connect to portal by IE.
    I am new to this so any help will be greatly appreciated.
    thanks,
    Jenni

    OS is Windows Server. SAPID is IKI. I am the only one trying to connect to BI so DPMON is not the issue. I wanted to stop and start the SAPIKI_03 service but I can not stop it, maybe it is related to that.
    What are the post steps after installing rapid installer?
    How can I make sure that I installed Java+Abap stack or only Java?
    Thank you for your help.
    jenn

Maybe you are looking for