NW702 EHP2: BRFPlus could not be opendend
Hi all,
After installing successfully the Trial NetWeaver 7.0 Enhancement Package 2 (NW 702) on an virtual machine (mac + parallels - windows 7 ultimate) I try to call the 'brfplus' Transaction... but without success.
I got following Error-Message in the IE-Browser:
"The URl doesn`t have an valid domain (eazzy8ca1 instead of eazzy8ca1.<domain>.<ext>)."
I only activated some services in the SICF-Transaction. Does I miss something?
Regards,
Damir
Hi Phillip,
thanks for the help...
But after setting the FQDN Parameter with TA 'RZ10' (according to your link) I try to save the changings.
Then I got an error message, that another Parameter is invalid (I think it was ada/db or similiar) I deleted this parameter, so that I got a new version of the Instance-Profile.
After Restarting the server I wasn´t possible to start the SAP NSP Instance with the SAP Management Console ;-/
It seem so that I have to uninstall the SAP System to try a new way...
Any other ideas?
Cheers,
Damir
Similar Messages
-
Cannot sync, error message "could not be read" for an iPod no longer in use
I have two problems. I upgraded iTunes to 7.2 and the very next morning my iPod died. It is completely unresponsive. Maybe it's coincidental. So I bought a new 80 gig iPod and gave it a different name than the old dead iPod. Now when I try to sync the new iPod, it goes for about 10 minutes, then it fails with this message:
Attempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer! Somehow, minutes into syncing, iTunes has forgotten which iPod it is looking at. I have seen the article about the "cannont be read" message and it is not relevant. I need to make iTunes forget about the old dead iPod so it will stop looking for it. I've tried removing the files from "Documents and Settings" but iTunes still remembers the old unit. Where else does it store information? Any recommendations?
Windows XPAttempting to copy to the disk "old iPod name" failed. The disk could not be read from or written to.
It is complaining that it can not read the old dead iPod that is NOT hooked up to the computer!
Okay, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear -
IPod Error Message: "The disk could not be read from or written to."
Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 GenerationOkay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know. -
Error: "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX
Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
Does anyone have any info as to what the problem may be and how to correct it.
ThanksThanks for the response. OK... This is the first day I have been able to get back to the problem.
My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
Again thanks for taking the time to respond to this issue. -
I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.
Have you tried restoring the Preferences yet?
-
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Hi all,
Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
However, some images won't unmount and the unmount process displays the following:
C:\Windows\system32>dism /get-mountedwiminfo
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Mounted images:
Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Mounted Read/Write : Yes
Status : Invalid
The operation completed successfully.
C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
mp\~$WDSMGMT.000 /discard
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Unmounting image
[==========================100.0%==========================]
Error: 0xc1420117
The directory could not be completely unmounted. This is usually due to applica
tions that still have files opened within the mount directory. Close these file
s and unmount again to complete the unmount process.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Using process explorer shows no running processes that have the files open and the dism.log file shows:
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
2009-12-16 11:49:35, Error DISM DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
2009-12-16 11:49:35, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2009-12-16 11:49:35, Info DISM DISM.EXE:
2009-12-16 11:49:35, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2009-12-16 11:49:35, Info DISM DISM.EXE:
2009-12-16 11:49:35, Info DISM DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info DISM DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
Any suggestions gratefully accepted. - Matt.Hi all,
had same problem unmounting the wim file using Windows 7 Pro 32bit.
My solution was: Checking for "wrong" Dism.exe
Preparing a WinPE I followed the steps in the help of AIK. I ran the
copype.cmd batch. When it was finished, it said that it added something
to the path environment variable. It was clear that it did so in order
to find the tools needed for the further steps. As long as everything
worked, I didn't give it a second thought. Then I could not unmount the
WIM.
I looked at the PATH variable: NO entry pointed to the directory where
dism.exe was in. (In my case that would have been
c:\program files\windows aik\tools\x86\servicing
Magically, dism.exe started from everywhere though.
Doing a dir c:\dism.exe /s /a showed I had a Dism.exe in
c:\windows\system32, as well. This one has a file size different from
the correct one. Obviously I had started this one (because PATH points
there).
Starting the correct dism.exe let me unmount the WIM without problems.
Regards,
Robert -
Error while consolidating. The operation could not be completed.
Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-) -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
Erroe while invoking a process (could not validate SAML)
Hi,
I am getting the following error while invoking a process from
Weblogic Portal Server.The invocation happens properly always but
after frequent intervals(approx 1-1.5 hrs) this error comes.Then if
the Portal Server(the client which is invoking the process) is
restarted again it works properly.
This is very urgent to resolve.Any pointers to this will be very
helpful.
Thannks in advance,
Leena Jain
Stack Trace of the error:
ALC-DSC-215-000: com.adobe.idp.dsc.DSCAuthenticationException: None of
the Auth Provider could authenticate the user. Authentication Failed
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.authenticate
(AbstractMessageReceiver.java:157)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke
(AbstractMessageReceiver.java:312)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall
(SoapSdkEndpoint.java:138)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke
(SoapSdkEndpoint.java:81)
at sun.reflect.GeneratedMethodAccessor377.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.axis.providers.java.RPCProvider.invokeMethod
(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage
(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke
(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit
(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:
118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke
(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:
281)
at org.apache.axis.transport.http.AxisServlet.doPost
(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:
727)
at org.apache.axis.transport.http.AxisServletBase.service
(AxisServletBase.java:327)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:
820)
at weblogic.servlet.internal.StubSecurityHelper
$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet
(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute
(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter
(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter
(FilterChainImpl.java:42)
at
com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter
(InvocationFilter.java:43)
at weblogic.servlet.internal.FilterChainImpl.doFilter
(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext
$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs
(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown
Source)
at
weblogic.servlet.internal.WebAppServletContext.securedExecute
(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute
(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run
(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: | [com.adobe.idp.um.api.impl.AuthenticationManagerImpl]
errorCode:16421 errorCodeHEX:0x4025 message:Could not validate SAML
Token --- Assertion is not valid. Current time is greater than
NOTonOrAfter time specified in the Assertion| [IDPLoggedException]
errorCode:12804 errorCodeHEX:0x3204 message:Could not validate SAML
Token --- Assertion is not valid. Current time is greater than
NOTonOrAfter time specified in the Assertion
at com.adobe.idp.um.api.impl.ManagerImpl.handleException
(ManagerImpl.java:246)
at com.adobe.idp.um.api.impl.ManagerImpl.handleException
(ManagerImpl.java:192)
at
com.adobe.idp.um.api.impl.AuthenticationManagerImpl.validateAssertionCheck
(AuthenticationManagerImpl.java:587)
at
com.adobe.idp.um.api.impl.AuthenticationManagerImpl.validateAssertion
(AuthenticationManagerImpl.java:552)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.authenticate
(AbstractMessageReceiver.java:132)
... 33 moreThis happens due to expiry of the SAML assertion that the client has. Have a look at the Renew Assertion Recipe at the cookbook site
-
ITunes 10.0.1 "the network connection could not be made"
This was not a problem for me on 10.0. I can no longer update my podcasts because I get this error message
"There was a problem downloading (podcast name) the network connection could not be made"
so first I ran diagnostics for the network connection and it said that it could not make a secure connection to the itunes store. I clicked help and it said to add a rule to the windows firewall (even though one already existed), I did that and now its green but I still get the same error message. Here is the information from the diagnostics.
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
iTunes 10.0.1.22
QuickTime 7.6.8
FairPlay 1.9.16
Apple Application Support 1.3.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.2.0.47
Apple Mobile Device Driver 1.49.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.7.1.420
Gracenote MusicID 1.7.1.78
Gracenote Submit 1.7.1.106
iTunes Serial Number 0637C6B672852BC1
Current user is not an administrator.
The current local date and time is 2010-09-28 09:37:04.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 260M
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.0.1.22 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.2.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {A05144D0-DC62-4367-9AEA-8537EF0D39C9}
Description: Intel(R) 82577LC Gigabit Network Connection
IP Address: none of your business
Subnet Mask: 255.255.255.0
Default Gateway: none of your business
DHCP Enabled: Yes
DHCP Server: none of your business
Lease Obtained: Tue Sep 28 09:02:30 2010
Lease Expires: Thu Sep 30 09:02:30 2010
DNS Servers: none of your business
Adapter Name: {E8E377A7-4E43-4F3C-9BE3-9218319096C5}
Description: VirtualBox Host-Only Ethernet Adapter
IP Address: none of your business
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 09:00:00 1970
Lease Expires: Thu Jan 01 09:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Last successful store access was 2010-09-28 09:34:16.
I modified it slightly because my IP address is not necessary for troubleshooting this issue. is anyone else having the same problem? how can i fix thisDid you get anywhere with this? I'm getting the same error when I try to use Home Sharing. It worked through all the 9.x versions, but with 10.0.1, I can't even home share between two identical MacBooks. I get the above error when I try to copy a song / video / etc. from one library to another.
-
IPod cannot be synced because external hard drive could not be read
I moved my music folder to an external hard drive to create space on my laptop, and changed the location under Preferences / Advanced. Since I did this, my iPod trys to automatically sync but gives the error message "The iPoD "[name]" cannot be synced. The disk could not be read from or written to." The external hard drive is on and working. Is there some reason that the iPod will not sync with this external hard drive? What do I need to do to fix it? Thanks, Bill
First question, since you made
the change, can you still play your music from within
iTunes?
Patrick
Sorry for the delay in answering as I have been traveling. Yes, I can play music from iTunes. The music is located on my external hard drive. iTunes software is on my laptop, and the music library points to the music folder on my external hard drive.
Thanks, Bill
Dell Laptop Windows XP -
Disk could not be read from or written to
I'm a new ipod user. I can get songs on my ipod. But when I go to get photos I get an error message saying, "ipod cannot be updated. The disk could not be read from or written to."
In itunes I can see the ipod. When I go to look at My Computer, it does not show the ipod as a disk drive.
Thanks!I'm a new ipod user. I can get songs on my ipod.
But when I go to get photos I get an error message
saying, "ipod cannot be updated. The disk could not
be read from or written to."
In itunes I can see the ipod. When I go to look at My
Computer, it does not show the ipod as a disk drive.
Thanks!
It's so simple, dont worry. Just connect your ipod to the computer. iTunes must open. In iTunes clcik on the small ipod icon which appears at the right bottom of the itunes window. click on that icon and another window with some options will be opened. Click on "enable disk use" and make this selection marked and click ok.
it'll certainly help! -
Suddenly my Ipod will not sync. The error message says "...disk could not be read from or written to..." We tried the HOLD TOGGELING. But that didn't work. It won't let me restore the Ipod either because it says other programs are currently in use.
Suggestions would be greatful!Welcome to the discussions,
if the reset did not work, did you try to put it into disk mode? http://support.apple.com/kb/HT1363 -
Error Message: "Disk could not be read from or written to".
New 5th Gen. was downloading CD's I loaded into iTunes just fine; when uploading tunes into iPod yesterday this error message appeared: "Attempting to copy to the disk (iPod name) failed. Disk could not be read from or written to". Restored iPod with 1/10/06 update of iPod Install; using iTunes 6.0.2; operating system 10.3.9. Frustrated. iPod useless at this point. Anyone found a fix to this vexing problem?
Thanks,
JohnThanks Jeff. Only thing that rings true is updating OS; when I tried to downoad 10.4 message said I 'could not on this computer'. Since I purchased and installed 10.3 a year ago I don't understand. Also, iPod was downloading perfectly until two days ago when -36 appeared. Bummer. I am not a techie, Apple tech support does not have a clue, and iPod is useless. Ideas?
Maybe you are looking for
-
Where can I get an Arabic USB/Wireless Apple keyboard?!
I have asked this to Apple UK and Apple USA telephone sales, who have no idea where to start (other than google!) Where can I buy one of the Arabic USB keyboards?! How hard can it be to get one? I'm in London, with a UK Mac Pro. Apple say they won;t
-
Checking /Viewing Unix file permissions
Is there a way for me to check file permissions (In Java) under unix, without having to call a system dependent function. (ie Runtime.getRuntime(); run.exec(....)) Any help would be greatly appreicated. Curtney
-
Airport Extreme Bridge Mode Connection Drop
Hi everyone, Hoping that someone will be able to help me. I have a one year old son who is now getting his hands into everything so a few weeks ago I decided to look at my options for networking my home iMac and External HD's. I am currently running
-
Is there anyway to uncheck entire albums in my itunes, as opposed to unchecking each song??
Is there anyway to uncheck an entire album in my itunes as apposed to unchecking each song seperately?
-
Installing Snow Leopard on MacBook with OS 10.5.2
I'm inquiring for my son who has the MacBook. When we purchased SL at the mac Store, the clerk indicated we could install it over the old OS....and not have to back anything up. My son installed SL and now reports that it is sluggish and not running