NWA Configuratios for EP

Hi Experts,
Could somebody help me with the providing me the documents or links for NWA configurations for EP only.
Can we configure alerts for EP in NWA ?
Also I have a doubt as which to use for EP i.e SOLMAN or NWA for monitoring .
Regards
Jimmy

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/009b6526-0479-2910-77b5-d00d36105e11?rid=/library/uuid/a9df9590-0201-0010-0bae-fea7edc2ffd9#q8 [original link is broken]
You will get an idea if u read the 8th question here.
Reward points if useful

Similar Messages

  • Change NWA language for single user

    Hello, gurus!
    The question is stated above: how can I change NWA interface language only for single user?
    Users in our BPM system are fetched from Active Directory therefore I cannot change (as they advise) user for my user from NWA. It is inactive.
    Is there any other solution?

    It shows that users are stored in LDAP.
    Also I'd like to draw your attention to language preferences in my browser
    Desirable language (English) is specified as recommended in guidelines, but NWA nevertheless is showed in Russian as you can see.

  • Laptop configuratio for Oracle Apps R12 installation

    hi,
    I would like to buy a laptop, which should support Oracle Apps R12 and Linux also, any body have idea about required configuration of laptop which support above requirement, please share it.
    Thanks
    ven

    Some requirements are documented in the install guide and in ML note 402310.1
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120oaig.pdf
    HTH
    Srini Chavali

  • Logs and traces are not reflecting in NWA

    I have to check default trace files from NWA. and for this NWA->montiroing->logs and traces->defaualt traces(filter) but it is saying no logs found.
    Do I have to activate some setting?not sure of this.Can any one let me know what I have to do to make default traces to be shown in NWA.
    Thank you.

    First of all I think this might be because you have not logged in as SAP NetWeaver Admininstrator role.
    Check SAP Note [1166762|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1166762]
    Form this note check that you have activated "Default Logger Param" in the Configuration > Miscellaneous area of Risk Analysis and Remediation.
    Also you will get few more notes at SAP if you want to activate specific logs.

  • Message "Password is blocked" when trying to access nwa

    Hello everyone,
    when i try to access the nwa with the administrator user i get the message "Password is blocked".
    1. Why is it blocked? It's the first time anyone tries to access the nwa in this installation
    2. How can i unblock it? Note: the password is only blocked for the nwa, SAP Logon can be accessed without problems.
    Sincerely,
    Tanja Wiemann
    EDIT:
    when i enter a wrong password, the same message appears.
    Do i have to set a distinct nwa-password for that user somewhere?

    Thanks for the answers.
    I'm not really a SAP-Expert so i don't know most of the abbrevations used in those links.
    I used another workaround: i created a new user and gave him the j2ee-administrator-role (which the blocked user also had).
    The other user is still locked, but i have the feeling that i will have to invest too much time to learn how to unlock him (seems to be symptomatic in the SAP-world: great effort -> little effect...).
    Sincerely,
    Tanja

  • Access of NWA

    Dear All,
    I would want to understand as to how I can connect to the NWA to register my mobile device.The MI server 7.0 is installed and the client as well is installed, but I was going through a document which suggests to register the device in NWA.
    Also, Im able to access SAP MC via : http://FQDN:portnumber/sapmc
    Regards,
    Sandeep Tudumu
    Edited by: Sandeep Tudumu on Feb 11, 2010 2:10 PM

    Hi Sandeep,
    Please open http://HOST:PORT/index.html for all SAP NetWeaver Application Server Java administration.
    Here you can find 'SAP NetWeaver Administrator' that will open NWA Adaminstrator(http://HOST:PORT/nwa).
    For SAP Management Console - (http://HOST:PORT/sapmc/sapmc.html)
    Hope this will helps you.
    Thanks
    Arun Jaiswal

  • Receiver File Adapter: FTPS Error

    On sending a text file to a trading partner the log in the communication channel shows the following:
    Connecting to FTP server - success
    Write to FTP server - success
    Transfer: "TXT" mode - success
    Exception caught by adapter framework:connection timed out - Error
    The FTP connection Parameters have:
    Data connection = Passive
    Connection security = FTPS (FTP using SSL/TLS)
    Command order AUTH TLS, USER, PASS, PBSZ, PROT
    Use of X509 cert for Client Authentication is checked
    Keystore = service_ssl
    x.509 Cert and private key = *******.crt
    When I look in the NWA logs for default trace I see several messages with the text "Rolling back transaction for message..." plus a FILE_ERR_211
    What is a FILE_ERR_211?
    Thanks
    Mark

    hi mark,
    To configure a timeout for the FTP connection, please enable the "Advanced Mode" for the respective FTP communication channel in the Integration Directory and add an entry "ftp.timeout"=timeoutSecs
    (without any quotation marks) to the "Additional Parameters" section, where timeoutSecs is the desired FTP timeout in seconds.
    regards
    kummari

  • Webclient Configuration Problem

    Hi,
    I have created a configuratio for role IC_agent with role config key 'ZW_rolekey' and object type and subobject type. I had removed a few assingment blocks from that configuration, but when i open the browser, those assignment blocks are still visible. In f2 l can see that it is searching for the coreect configuration and it is also finding the required configuration.i have transported all the configurations to the appropriate client as well, this is happening only for transaction type violation, other transaction type configurations are working fine ,,,, can anybody help me with this urgently .................
    Thank you,

    Hi,
    please check if it is maybe related to a older personalization of the UI.
    delete the personalizations using SE38 with BSP_DLC_DELETE_PERSONALIZATION.
    Kind regards
    Manfred

  • Standard Adapter Module "Message Transform Bean" in Seeburger AS2 Adapter

    Hi,
        I am calling standard adapter module "Message Transform Bean" in seeburger AS2 Sender adapter where I am getting the following error :
    ClassNotFoundException:com.sap.aii.messaging.adapter.Conversion . Can anybody help me on this. Appreciate for your respoinse.
    Thank you,
    Mallikarjuna Rao M

    Hi,
    Thank you for your replies I manage to get NWA dump for this issue.. Here is the log
    Could not call backend system: Error in ???-module:Transform: failed to set up the transformer for channel 6857fd15f84d3e23a7b0f51ca1851b20; modkey TXT2XML; caused by java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
    Loader Info -
    ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
    Living status: alive
    Direct parent loaders:
       [system:Frame]
       [service:servlet_jsp]
       [service:ejb]
       [library:engine.j2ee14.facade]
       [library:com.sap.base.technology.facade]
       [library:com.sap.aii.af.lib]
       [library:com.sap.aii.af.sdk.lib]
       [service:com.sap.aii.af.cpa.svc]
       [service:com.sap.aii.af.svc]
       [service:com.sap.aii.adapter.xi.svc]
       [library:com.sap.aii.adapter.lib]
    Resources:
       D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
    [LOC: com.seeburger.as2.impl.SHCInitiatorProcessor.initiateToBackend] Caused by: Error in ???-module:Transform: failed to set up the transformer for channel 6857fd15f84d3e23a7b0f51ca1851b20; modkey TXT2XML; caused by java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
    Loader Info -
    ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
    Living status: alive
    Direct parent loaders:
       [system:Frame]
       [service:servlet_jsp]
       [service:ejb]
       [library:engine.j2ee14.facade]
       [library:com.sap.base.technology.facade]
       [library:com.sap.aii.af.lib]
       [library:com.sap.aii.af.sdk.lib]
       [service:com.sap.aii.af.cpa.svc]
       [service:com.sap.aii.af.svc]
       [service:com.sap.aii.adapter.xi.svc]
       [library:com.sap.aii.adapter.lib]
    Resources:
       D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
    at com.seeburger.xi.api.module.impl.nw71.SeeModuleProcessorLocal71.process(SeeModuleProcessorLocal71.java:55)
    at com.seeburger.xi.connector.fw.InitiationThread.run(InitiationThread.java:101)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
    Caused by: java.lang.ClassNotFoundException: com.sap.aii.messaging.adapter.Conversion
    Loader Info -
    ClassLoader name: [sap.com/com.sap.aii.af.mod.trans.app]
    Living status: alive
    Direct parent loaders:
       [system:Frame]
       [service:servlet_jsp]
       [service:ejb]
       [library:engine.j2ee14.facade]
       [library:com.sap.base.technology.facade]
       [library:com.sap.aii.af.lib]
       [library:com.sap.aii.af.sdk.lib]
       [service:com.sap.aii.af.cpa.svc]
       [service:com.sap.aii.af.svc]
       [service:com.sap.aii.adapter.xi.svc]
       [library:com.sap.aii.adapter.lib]
    Resources:
       D:\usr\sap\BWD\DVEBMGS00\j2ee\cluster\apps\sap.com\com.sap.aii.af.mod.trans.app\EJBContainer\applicationjars\com.sap.aii.af.mod.trans.ejb.jar
    at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:259)
    at com.sap.engine.boot.loader.MultiParentClassLoader.loadClass(MultiParentClassLoader.java:228)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:353)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:164)
    at com.sap.aii.af.modules.trans.MessageTransformBean.loadClass(MessageTransformBean.java:121)
    at com.sap.aii.af.modules.trans.MessageTransformBean.setup(MessageTransformBean.java:178)
    at com.sap.aii.af.modules.trans.MessageTransformBean.process(MessageTransformBean.java:346)
    at sun.reflect.GeneratedMethodAccessor484_10002.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at $Proxy2674_10002.process(Unknown Source)
    at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:249)
    at sun.reflect.GeneratedMethodAccessor311_10002.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
    at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
    at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
    at $Proxy102_10002.process(Unknown Source)
    at com.seeburger.xi.api.module.impl.nw71.SeeModuleProcessorLocal71.process(SeeModuleProcessorLocal71.java:43)
    Waiting for your valuable inputs on this.
    Thank you,
    Mallikarjuna Rao M

  • Using X.509 Client Certificates - SAP ABAP Webgui (SSL)

    Hello,
    current runs the integrated ITS (Webgui). We now want the smart card and have adapted to the configuration:
    RZ10:
    icm/server_port_0=PROT=HTTPS,PORT=1443,TIMEOUT=180                                                                               
    icm/HTTPS/verify_client=2   
    table USREXTID: C=DE,ST=xxx,L=xxx,O=xxx,OU=xxx,CN=xxx,emailAddress=xxx
    smart card certification -> firefox 2.x and IE 7.x install.
    SICF: Webgui Service -> Login with Client Certificate
    The test (with IE or Firefox) was unsuccessful.
    SMICM Trace:
    [Thr 5708] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 5708] ERROR in ssl3_get_client_certificate: (536871698/0x20000312) the client did not send a certificate handshake message
    [Thr 5708] << -
    End of Secude-SSL Errorstack -
    [Thr 5708] <<- ERROR: SapSSLSessionStart(sssl_hdl=003FFBC0)==SSSLERR_SSL_ACCEPT
    [Thr 5708] ->> SapSSLErrorName(rc=-56)
    [Thr 5708] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT
    [Thr 5708] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn.c   1777]
    [Thr 5708] ->> SapSSLSessionDone(&sssl_hdl=023BC640)
    What should I do now?
    Thanks, Silke
    Full Trace:
    sysno      02
    sid        RD1
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    148
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5468
    [Thr 5416] started security log to file dev_icm_sec
    [Thr 5416] ICM running on: sdatu100.pvw.tu-darmstadt.de
    [Thr 5416] MtxInit: 30001 0 2
    [Thr 5416] IcmInit: listening to admin port: 65000
    [Thr 5416] DpSysAdmExtCreate: ABAP is active
    [Thr 5416] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    [Thr 5416] DpShMCreate: sizeof(wp_adm)          13576     (1044)
    [Thr 5416] DpShMCreate: sizeof(tm_adm)          36258120     (18120)
    [Thr 5416] DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    [Thr 5416] DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    [Thr 5416] DpCommTableSize: max/headSize/ftSize/tableSize=2000/8/2112040/2112048
    [Thr 5416] DpShMCreate: sizeof(comm_adm)          2112048     (1048)
    [Thr 5416] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    [Thr 5416] DpShMCreate: sizeof(slock_adm)          0     (96)
    [Thr 5416] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    [Thr 5416] DpShMCreate: sizeof(file_adm)          0     (72)
    [Thr 5416] DpShMCreate: sizeof(vmc_adm)          0     (1296)
    [Thr 5416] DpShMCreate: sizeof(wall_adm)          (224040/329544/56/100)
    [Thr 5416] DpShMCreate: sizeof(gw_adm)     48
    [Thr 5416] DpShMCreate: SHM_DP_ADM_KEY          (addr: 028C0040, size: 38968448)
    [Thr 5416] DpShMCreate: allocated sys_adm at 028C0040
    [Thr 5416] DpShMCreate: allocated wp_adm at 028C1B30
    [Thr 5416] DpShMCreate: allocated tm_adm_list at 028C5038
    [Thr 5416] DpShMCreate: allocated tm_adm at 028C5068
    [Thr 5416] DpShMCreate: allocated wp_ca_adm at 04B591B0
    [Thr 5416] DpShMCreate: allocated appc_ca_adm at 04B5D800
    [Thr 5416] DpShMCreate: allocated comm_adm at 04B5EF70
    [Thr 5416] DpShMCreate: system runs without slock table
    [Thr 5416] DpShMCreate: system runs without file table
    [Thr 5416] DpShMCreate: allocated vmc_adm_list at 04D629A0
    [Thr 5416] DpShMCreate: allocated gw_adm at 04D629E0
    [Thr 5416] DpShMCreate: system runs without vmc_adm
    [Thr 5416] DpShMCreate: allocated ca_info at 04D62A10
    [Thr 5096] IcmProxyWatchDog: proxy watchdog started
    [Thr 5416] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 0
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 1
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 2
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 3
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 4
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 5
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 6
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 7
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 8
    [Thr 5416] IcmCreateWorkerThreads: created worker thread 9
    [Thr 4352] IcmWatchDogThread: watchdog started
    [Thr 5672] =================================================
    [Thr 5672] = SSL Initialization  on  PC with Windows NT
    [Thr 5672] =   (700_REL,Mar 25 2008,mt,ascii,SAP_UC/size_t/void* = 8/32/32)
    [Thr 5672]   profile param "ssl/ssl_lib" = "D:\usr\sap\RD1\SYS\exe\run\sapcrypto.dll"
               resulting Filename = "D:\usr\sap\RD1\SYS\exe\run\sapcrypto.dll"
    [Thr 5672] =   found SAPCRYPTOLIB  5.5.5C pl17  (Aug 18 2005) MT-safe
    [Thr 5672] =   current UserID: SDATU100\SAPServiceRD1
    [Thr 5672] =   found SECUDIR environment variable
    [Thr 5672] =   using SECUDIR=D:\usr\sap\RD1\DVEBMGS02\sec
    [Thr 5672] =  secudessl_Create_SSL_CTX():  PSE "D:\usr\sap\RD1\DVEBMGS02\sec\SAPSSLC.pse" not found,
    [Thr 5672] =      using PSE "D:\usr\sap\RD1\DVEBMGS02\sec\SAPSSLS.pse" as fallback
    [Thr 5672] =  secudessl_Create_SSL_CTX():  PSE "D:\usr\sap\RD1\DVEBMGS02\sec\SAPSSLA.pse" not found,
    [Thr 5672] =      using PSE "D:\usr\sap\RD1\DVEBMGS02\sec\SAPSSLS.pse" as fallback
    [Thr 5672] ******** Warning ********
    [Thr 5672] *** No SSL-client PSE "SAPSSLC.pse" available
    [Thr 5672] *** -- this will probably limit SSL-client side connectivity
    [Thr 5672] ********
    [Thr 5672] = Success -- SapCryptoLib SSL ready!
    [Thr 5672] =================================================
    [Thr 5672] *** WARNING => HttpPlugInInit: Parameter icm/HTTPS/trust_client_with_issuer or icm/HTTPS/trust_client_with_subject no
    X.509 cert data will be removed from header [http_plg.c   720]
    [Thr 5672] ISC: created 400 MB disk cache.
    [Thr 5672] ISC: created 50 MB memory cache.
    [Thr 5672] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
    [Thr 5672] HttpExtractArchive: files from archive D:\usr\sap\RD1\SYS\exe\run/icmadmin.SAR in directory D:/usr/sap/RD1/DVEBMGS02/
    [Thr 5672] HttpSubHandlerAdd: Added handler HttpAdminHandler(slot=1, flags=4101) for /sap/admin:0
    [Thr 5672] CsiInit(): Initializing the Content Scan Interface
    [Thr 5672]            PC with Windows NT (mt,ascii,SAP_CHAR/size_t/void* = 8/32/32)
    [Thr 5672] CsiInit(): CSA_LIB = "D:\usr\sap\RD1\SYS\exe\run\sapcsa.dll"
    [Thr 5672] HttpSubHandlerAdd: Added handler HttpAuthHandler(slot=2, flags=12293) for /:0
    [Thr 5672] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=3, flags=1052677) for /:0
    [Thr 5672] Started service 1443 for protocol HTTPS on host "sdatu100.pvw.tu-darmstadt.de"(on all adapters) (processing timeout=9
    [Thr 5672] Started service 25000 for protocol SMTP on host "sdatu100.pvw.tu-darmstadt.de"(on all adapters) (processing timeout=8
    [Thr 5672] Tue Jul 15 14:38:37 2008
    [Thr 5672] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 5 seconds [icxxman.c    4578]
    [Thr 5672] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxman.c
    [Thr 3932] Tue Jul 15 14:39:32 2008
    [Thr 3932] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c  430]
    [Thr 5416] Tue Jul 15 14:40:23 2008
    [Thr 5416] IcmSetParam: Switched trace level to: 3
    [Thr 5416] *
    [Thr 5416] * SWITCH TRC-LEVEL to 3
    [Thr 5416] *
    [Thr 5416] NiBufIAlloc: malloc ICM_EXT, to 80 bytes
    [Thr 5416]
    NiBufSend starting
    [Thr 5416] NiIWrite: hdl 3 sent data (wrt=80,pac=1,MESG_IO)
    [Thr 5416] SiSelNSelect: start select (timeout=-1)
    [Thr 5416] SiSelNNext: sock 8088 selected (revt=r--)
    [Thr 5416] NiBufISelProcess: hdl 9 process r-
    [Thr 5416] NiBufIAlloc: malloc NIBUF-IN, to 72 bytes
    [Thr 5416] NiIRead: hdl 9 received data (rcd=72,pac=1,MESG_IO)
    [Thr 5416] NiBufIIn: NIBUF len=72
    [Thr 5416] NiBufIIn: packet complete for hdl 9
    [Thr 5416] NiBufISelUpdate: new MODE -- (r-) for hdl 9 in set0
    [Thr 5416] SiSelNSet: set events of sock 8088 to: ---
    [Thr 5416] NiBufISelUpdate: new STAT r-- (---) for hdl 9 in set0
    [Thr 5416] NiSelIListInsert: add hdl 9 [17] to buf-list (0) of set0
    [Thr 5416] NiSelISelectInt: 1 handles selected (1 buffered)
    [Thr 5416] IcmMsgProcess: Receive data from partner: WP(2), wp_no: 1
    [Thr 5416]
    NiBufReceive starting
    [Thr 5416] NiBufISelUpdate: new MODE r- (--) for hdl 9 in set0
    [Thr 5416] SiSelNSet: set events of sock 8088 to: rp-
    [Thr 5416] NiBufISelUpdate: new STAT - (r) for hdl 9 in set0
    [Thr 5416] NiSelIListRemove: remove hdl 9 [17] from buf-list (1) of set0
    [Thr 5416] IcmRecMsg: received 72 bytes
    [Thr 5416] ============================================
    [Thr 5416] | COM_DATA:
    [Thr 5416] | Offset: 0     | Version: 7000
    [Thr 5416] | MsgNo: 2     | Opcode: ICM_COM_OP_ICM_MONITOR (66)
    [Thr 5416] ============================================
    [Thr 5416] IcmHandleAdmMsg: op: 66
    [Thr 5416] NiBufIAlloc: malloc NiBufadm, to 0 bytes
    [Thr 5416] NiBufDup: ref 1 for buf 0252CE50
    [Thr 5416] IcmQueueAppend: queuelen:     1
    [Thr 5416] IcmCreateRequest: Appended request 13
    [Thr 5416] NiBufIAlloc: malloc ICM_EXT, to 80 bytes
    [Thr 5416]
    NiBufSend starting
    [Thr 4392] IcmWorkerThread: worker 3 got the semaphore
    [Thr 4392] REQUEST:
        Type: ADMMSG    Index = 12
    [Thr 4392] NiBufFree: ref 1 for buf 0252CE50
    [Thr 5416] NiIWrite: hdl 9 sent data (wrt=80,pac=1,MESG_IO)
    [Thr 4392] MPI<a>0#5 GetInbuf -1 138968 440 (1) -> 6
    [Thr 4392] IcmHandleMonitorMessage: called with opcode: 100
    [Thr 5416] SiSelNSelect: start select (timeout=-1)
    [Thr 4392] MPI<9>1#4 GetOutbuf -1 1489a0 65536 (0) -> 05348A00 0
    [Thr 4392] MPI<a>0#6 FreeInbuf#2 0 138968  0 -> 0
    [Thr 4392] MPI<9>1#5 FlushOutbuf l-1 1 1 1489a0 1104 6 -> 053489E0 0
    [Thr 4392] IcmWorkerThread: Thread 3: Waiting for event
    [Thr 5416] SiSelNNext: sock 8088 selected (revt=r--)
    [Thr 5416] NiBufISelProcess: hdl 9 process r-
    [Thr 5416] NiBufIAlloc: malloc NIBUF-IN, to 72 bytes
    [Thr 5416] NiIRead: hdl 9 received data (rcd=72,pac=1,MESG_IO)
    [Thr 5416] NiBufIIn: NIBUF len=72
    [Thr 5416] NiBufIIn: packet complete for hdl 9
    [Thr 5416] NiBufISelUpdate: new MODE -- (r-) for hdl 9 in set0
    [Thr 5416] SiSelNSet: set events of sock 8088 to: ---
    [Thr 5416] NiBufISelUpdate: new STAT r-- (---) for hdl 9 in set0
    [Thr 5416] NiSelIListInsert: add hdl 9 [17] to buf-list (0) of set0
    [Thr 5416] NiSelISelectInt: 1 handles selected (1 buffered)
    [Thr 5416] IcmMsgProcess: Receive data from partner: WP(2), wp_no: 1
    [Thr 5416]
    NiBufReceive starting
    [Thr 5416] NiBufISelUpdate: new MODE r- (--) for hdl 9 in set0
    [Thr 5416] SiSelNSet: set events of sock 8088 to: rp-
    [Thr 5416] NiBufISelUpdate: new STAT - (r) for hdl 9 in set0
    [Thr 5416] NiSelIListRemove: remove hdl 9 [17] from buf-list (1) of set0
    [Thr 5416] IcmRecMsg: received 72 bytes
    [Thr 5416] ============================================
    [Thr 5416] | COM_DATA:
    [Thr 5416] | Offset: 0     | Version: 7000
    [Thr 5416] | MsgNo: 2     | Opcode: ICM_COM_OP_ICM_MONITOR (66)
    [Thr 5416] ============================================
    [Thr 5416] IcmHandleAdmMsg: op: 66
    [Thr 5416] NiBufIAlloc: malloc NiBufadm, to 0 bytes
    [Thr 5416] NiBufDup: ref 1 for buf 0252CE50
    [Thr 5416] IcmQueueAppend: queuelen:     1
    [Thr 5416] IcmCreateRequest: Appended request 14
    [Thr 5416] NiBufIAlloc: malloc ICM_EXT, to 80 bytes
    [Thr 5416]
    NiBufSend starting
    [Thr 5784] IcmWorkerThread: worker 4 got the semaphore
    [Thr 5416] NiIWrite: hdl 9 sent data (wrt=80,pac=1,MESG_IO)
    [Thr 5416] NiBufFree: ref 1 for buf 0252CE50
    [Thr 5416] SiSelNSelect: start select (timeout=-1)
    [Thr 5784] REQUEST:
        Type: ADMMSG    Index = 13
    [Thr 5784] MPI<c>0#5 GetInbuf -1 1489a0 440 (1) -> 6
    [Thr 5784] IcmHandleMonitorMessage: called with opcode: 100
    [Thr 5784] MPI<b>1#4 GetOutbuf -1 138968 65536 (0) -> 053389C8 0
    [Thr 5784] MPI<c>0#6 FreeInbuf#2 0 1489a0  0 -> 0
    [Thr 5784] MPI<b>1#5 FlushOutbuf l-1 1 1 138968 1104 6 -> 053389A8 0
    [Thr 5784] IcmWorkerThread: Thread 4: Waiting for event
    [Thr 4352] Tue Jul 15 14:40:26 2008
    [Thr 4352] NiSelISelectInt: 0 handles selected (0 buffered)
    [Thr 4352] IcmWatchDogThread: check ni handles (timeout=10000)
    [Thr 4352] SiSelNFCSelect: start select (timeout=10000)
    [Thr 5416] Tue Jul 15 14:40:29 2008
    [Thr 5416] SiSelNNext: sock 8160 selected (revt=r--)
    [Thr 5416] NiSelIListInsert: add hdl 6 [3] to sel-list (0) of set0
    [Thr 5416] NiSelISelectInt: 1 handles selected (0 buffered)
    [Thr 5416] IcmExternalLogin: Connection request from Client received
    [Thr 5416] NiIAccept: hdl 6 accepted connection
    [Thr 5416] NiICreateHandle: hdl 8 state NI_INITIAL
    [Thr 5416] NiIInitSocket: set default settings for hdl 8 / sock 8076 (I4; ST)
    [Thr 5416] NiIBlockMode: set blockmode for hdl 8 FALSE
    [Thr 5416] NiIAccept: state of hdl 8 NI_ACCEPTED
    [Thr 5416] NiIAccept: hdl 6 accepted hdl 8 from 192.168.1.3:1305
    [Thr 5416] NiIAccept: hdl 8 took local address 130.83.89.22:1443
    [Thr 5416] IcmConnCheckStoredClientConn: next client timeout check in 3 sec
    [Thr 5416] IcmServIncrRefCount: sdatu100.pvw.tu-darmstadt.de:1443 - serv_ref_count: 2
    [Thr 5416] IcmQueueAppend: queuelen:     1
    [Thr 5416] IcmCreateRequest: Appended request 15
    [Thr 5416] IcmConnIntegrateServer: accepted connection from 192.168.1.3 on service 1443
    [Thr 3932] IcmWorkerThread: worker 5 got the semaphore
    [Thr 3932] REQUEST:
        Type: ACCEPT CONNECTION    Index = 14
    [Thr 3932] CONNECTION (id=1/8):
        used: 1, type: 1, role: 1, stateful: 0
        NI_HDL: 8, protocol: HTTPS(2)
        local host:  130.83.89.22:1443 ()
        remote host: 192.168.1.3:1305 ()
        status: NOP
        connect time: 15.07.2008 14:40:29
        MPI request:        <0>      MPI response:        <0>
        request_buf_size:   0        response_buf_size:   0
        request_buf_used:   0        response_buf_used:   0
        request_buf_offset: 0        response_buf_offset: 0
    [Thr 5416] SiSelNSelect: start select (timeout=-1)
    [Thr 3932] MPI:1 create pipe 052002C0 1
    [Thr 3932] MPI<d>1#1 Open( ANONYMOUS 1 1 ) -> 1
    [Thr 3932] MPI<d>1#2 Open( ANONYMOUS 1 0 ) -> 1
    [Thr 3932] MPI:0 create pipe 05200180 1
    [Thr 3932] MPI<e>0#1 Open( ANONYMOUS 0 0 ) -> 0
    [Thr 3932] MPI<e>0#2 Open( ANONYMOUS 0 1 ) -> 0
    [Thr 3932] ->> SapSSLSessionInit(&sssl_hdl=023BC640, role=2 (SERVER), auth_type=2 (REQUIRE_CLIENT_CERT))
    [Thr 3932] <<- SapSSLSessionInit()==SAP_O_K
    [Thr 3932]      in: args = "role=2 (SERVER), auth_type=2 (REQUIRE_CLIENT_CERT)"
    [Thr 3932]     out: sssl_hdl = 003FFBC0
    [Thr 3932] ->> SapSSLSetNiHdl(sssl_hdl=003FFBC0, ni_hdl=8)
    [Thr 3932] NiIBlockMode: set blockmode for hdl 8 TRUE
    [Thr 3932]   SSL NI-sock: local=130.83.89.22:1443  peer=192.168.1.3:1305
    [Thr 3932] <<- SapSSLSetNiHdl(sssl_hdl=003FFBC0, ni_hdl=8)==SAP_O_K
    [Thr 3932] ->> SapSSLSessionStart(sssl_hdl=003FFBC0)
    [Thr 3932]   SapISSLServerCacheExpiration(): Calling ServerCacheCleanup() (lifetime=900)
    [Thr 3932]   SapISSLServerCacheExpiration(srv,"D:\usr\sap\RD1\DVEBMGS02\sec\SAPSSLS.pse"): Cache max/before/now = 5000/1/1
    [Thr 5096] Tue Jul 15 14:40:32 2008
    [Thr 5096] SiSelNSelect: of 1 sockets 0 selected
    [Thr 5096] IcmProxyWatchDog: check sockets (timeout=10000)
    [Thr 5096] SiSelNSelect: start select (timeout=10000)
    [Thr 4352] Tue Jul 15 14:40:36 2008
    [Thr 4352] NiSelISelectInt: 0 handles selected (0 buffered)
    [Thr 4352] IcmCheckForBlockedThreads: check for blocked SSL-threads
    [Thr 4352] IcmWatchDogThread: check ni handles (timeout=10000)
    [Thr 4352] SiSelNFCSelect: start select (timeout=10000)
    [Thr 5096] Tue Jul 15 14:40:42 2008
    [Thr 5096] SiSelNSelect: of 1 sockets 0 selected
    [Thr 5096] IcmProxyWatchDog: check sockets (timeout=10000)
    [Thr 5096] SiSelNSelect: start select (timeout=10000)
    [Thr 3932] Tue Jul 15 14:40:45 2008
    [Thr 3932]   peer has closed connection
    [Thr 3932] <<- SapSSLSessionStart(sssl_hdl=003FFBC0)==SSSLERR_CONN_CLOSED
    [Thr 3932] ->> SapSSLSessionDone(&sssl_hdl=023BC640)
    [Thr 3932] <<- SapSSLSessionDone(sssl_hdl=003FFBC0)==SAP_O_K
    [Thr 3932] NiICloseHandle: shutdown and close hdl 8 / sock 8076
    [Thr 3932] MPI<d>1#3 Close( 1 ) del=0 -> 0
    [Thr 3932] MPI<d>1#5 Delete( 1 ) -> 0
    [Thr 3932] MPI<d>1#4 Close( 1 ) del=1 -> 0
    [Thr 3932] MPI<e>0#3 Close( 0 ) del=0 -> 0
    [Thr 3932] MPI<e>0#5 Delete( 0 ) -> 0
    [Thr 3932] MPI<e>0#4 Close( 0 ) del=1 -> 0
    [Thr 3932] IcmConnFreeContext: context 1 released
    [Thr 3932] IcmServDecrRefCount: sdatu100.pvw.tu-darmstadt.de:1443 - serv_ref_count: 1
    [Thr 3932] IcmWorkerThread: Thread 5: Waiting for event
    [Thr 5416] SiSelNNext: sock 8160 selected (revt=r--)
    [Thr 5416] NiSelIListInsert: add hdl 6 [3] to sel-list (0) of set0
    [Thr 5416] NiSelISelectInt: 1 handles selected (0 buffered)
    [Thr 5416] IcmExternalLogin: Connection request from Client received
    [Thr 5416] NiIAccept: hdl 6 accepted connection
    [Thr 5416] NiICreateHandle: hdl 8 state NI_INITIAL
    [Thr 5416] NiIInitSocket: set default settings for hdl 8 / sock 8092 (I4; ST)
    [Thr 5416] NiIBlockMode: set blockmode for hdl 8 FALSE
    [Thr 5416] NiIAccept: state of hdl 8 NI_ACCEPTED
    [Thr 5416] NiIAccept: hdl 6 accepted hdl 8 from 192.168.1.3:1309
    [Thr 5416] NiIAccept: hdl 8 took local address 130.83.89.22:1443
    [Thr 5416] IcmConnCheckStoredClientConn: check for client conn timeout
    [Thr 5416] IcmConnCheckStoredClientConn: next client timeout check in 60 sec
    [Thr 5416] IcmServIncrRefCount: sdatu100.pvw.tu-darmstadt.de:1443 - serv_ref_count: 2
    [Thr 5416] IcmQueueAppend: queuelen:     1
    [Thr 5416] IcmCreateRequest: Appended request 16
    [Thr 5416] IcmConnIntegrateServer: accepted connection from 192.168.1.3 on service 1443
    [Thr 5708] IcmWorkerThread: worker 6 got the semaphore
    [Thr 5708] REQUEST:
        Type: ACCEPT CONNECTION    Index = 15
    [Thr 5708] CONNECTION (id=1/9):
        used: 1, type: 1, role: 1, stateful: 0
        NI_HDL: 8, protocol: HTTPS(2)
        local host:  130.83.89.22:1443 ()
        remote host: 192.168.1.3:1309 ()
        status: NOP
        connect time: 15.07.2008 14:40:45
        MPI request:        <0>      MPI response:        <0>
        request_buf_size:   0        response_buf_size:   0
        request_buf_used:   0        response_buf_used:   0
        request_buf_offset: 0        response_buf_offset: 0
    [Thr 5416] SiSelNSelect: start select (timeout=-1)
    [Thr 5708] MPI:0 create pipe 05200180 1
    [Thr 5708] MPI<f>0#1 Open( ANONYMOUS 0 1 ) -> 0
    [Thr 5708] MPI<f>0#2 Open( ANONYMOUS 0 0 ) -> 0
    [Thr 5708] MPI:1 create pipe 052002C0 1
    [Thr 5708] MPI<10>1#1 Open( ANONYMOUS 1 0 ) -> 1
    [Thr 5708] MPI<10>1#2 Open( ANONYMOUS 1 1 ) -> 1
    [Thr 5708] ->> SapSSLSessionInit(&sssl_hdl=023BC640, role=2 (SERVER), auth_type=2 (REQUIRE_CLIENT_CERT))
    [Thr 5708] <<- SapSSLSessionInit()==SAP_O_K
    [Thr 5708]      in: args = "role=2 (SERVER), auth_type=2 (REQUIRE_CLIENT_CERT)"
    [Thr 5708]     out: sssl_hdl = 003FFBC0
    [Thr 5708] ->> SapSSLSetNiHdl(sssl_hdl=003FFBC0, ni_hdl=8)
    [Thr 5708] NiIBlockMode: set blockmode for hdl 8 TRUE
    [Thr 5708]   SSL NI-sock: local=130.83.89.22:1443  peer=192.168.1.3:1309
    [Thr 5708] <<- SapSSLSetNiHdl(sssl_hdl=003FFBC0, ni_hdl=8)==SAP_O_K
    [Thr 5708] ->> SapSSLSessionStart(sssl_hdl=003FFBC0)
    [Thr 5708] NiIBlockMode: set blockmode for hdl 8 FALSE
    [Thr 5708] NiIHdlGetStatus: hdl 8 / sock 8092 ok, data pending (len=1)
    [Thr 5708] NiIBlockMode: set blockmode for hdl 8 TRUE
    [Thr 5708]   SSL_get_state() returned 0x00001181 "SSLv3 read client certificate B"
    [Thr 5708] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL
    [Thr 5708] SecudeSSL_SessionStart: SSL_accept() failed --
      secude_error 536871698 (0x20000312) = "the client did not send a certificate handshake message for its authentication and we c
    [Thr 5708] >> -
    Begin of Secude-SSL Errorstack -
    >>
    [Thr 5708] ERROR in ssl3_get_client_certificate: (536871698/0x20000312) the client did not send a certificate handshake message
    [Thr 5708] << -
    End of Secude-SSL Errorstack -
    [Thr 5708] <<- ERROR: SapSSLSessionStart(sssl_hdl=003FFBC0)==SSSLERR_SSL_ACCEPT
    [Thr 5708] ->> SapSSLErrorName(rc=-56)
    [Thr 5708] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT
    [Thr 5708] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn.c   1777]
    [Thr 5708] ->> SapSSLSessionDone(&sssl_hdl=023BC640)
    [Thr 5708] <<- SapSSLSessionDone(sssl_hdl=003FFBC0)==SAP_O_K
    [Thr 5708] NiICloseHandle: shutdown and close hdl 8 / sock 8092
    [Thr 5708] MPI<f>0#3 Close( 0 ) del=0 -> 0
    [Thr 5708] MPI<f>0#5 Delete( 0 ) -> 0
    [Thr 5708] MPI<f>0#4 Close( 0 ) del=1 -> 0
    [Thr 5708] MPI<10>1#3 Close( 1 ) del=0 -> 0
    [Thr 5708] MPI<10>1#5 Delete( 1 ) -> 0
    [Thr 5708] MPI<10>1#4 Close( 1 ) del=1 -> 0
    [Thr 5708] IcmConnFreeContext: context 1 released
    [Thr 5708] IcmServDecrRefCount: sdatu100.pvw.tu-darmstadt.de:1443 - serv_ref_count: 1
    [Thr 5708] IcmWorkerThread: Thread 6: Waiting for event
    [Thr 4352] Tue Jul 15 14:40:46 2008
    [Thr 4352] NiSelISelectInt: 0 handles selected (0 buffered)
    [Thr 4352] IcmQueueAppend: queuelen:     1
    [Thr 4352] IcmCreateRequest: Appended request 17
    [Thr 4352] IcmWatchDogThread: check ni handles (timeout=10000)
    [Thr 4352] SiSelNFCSelect: start select (timeout=10000)
    [Thr 4196] IcmWorkerThread: worker 7 got the semaphore
    [Thr 4196] REQUEST:
        Type: SCHEDULER    Index = 16
    [Thr 4196] IcmGetSchedule: found slot 0
    [Thr 4196] IcmAlReportData: Reporting data to CCMS Alerting Infrastructure
    [Thr 4196] NiIGetServNo: servicename '1443' = port 05.A3/1443
    [Thr 4196] IcmConnCheckStoredClientConn: next client timeout check in 59 sec
    [Thr 4196] NiIGetServNo: servicename '1443' = port 05.A3/1443
    [Thr 4196] IcmGetServicePtr: new serv_ref_count: 2
    [Thr 4196] PlugInHandleAdmMessage: request received:
    [Thr 4196] PlugInHandleAdmMessage: opcode: 136, len: 272, dest_type: 2, subhdlkey: 262145
    [Thr 4196] HttpSubHandlerCall: Call Handler: HttpCacheHandler, task=4, header_len=0
    [Thr 4196] HttpCacheHandler: 4 0 006BBBC4 00000000
    [Thr 4196] SCACHE: adm request received:
    [Thr 4196] SCACHE: opcode: 136, len: 272, dest_type: 2, dest:
    [Thr 4196] MTX_LOCK 3038 00ADEE88
    [Thr 4196] MTX_UNLOCK 3051 00ADEE88
    [Thr 4196] IctCmGetCacheInfo#5 -> 0
    [Thr 4196] IcmNetBufWrapBuf: allocated netbuf: 00AD2B48, blocks used: 1
    [Thr 4196] IcmNetBufWrapBuf: allocated netbuf: 00AD2B48
    [Thr 4196] IcmNetBufFree: free netbuf: 00AD2B48 out of 1 used
    [Thr 4196] IcmConnFreeContext: context 1 released
    [Thr 4196] IcmServDecrRefCount: sdatu100.pvw.tu-darmstadt.de:1443 - serv_ref_count: 1
    [Thr 4196] IcmGetSchedule: next schedule in 30 secs
    [Thr 4196] IcmWorkerThread: Thread 7: Waiting for event
    [Thr 5096] Tue Jul 15 14:40:52 2008
    [Thr 5096] SiSelNSelect: of 1 sockets 0 selected
    [Thr 5096] IcmProxyWatchDog: check sockets (timeout=10000)
    [Thr 5096] SiSelNSelect: start select (timeout=10000)

    >
    silke kubelka wrote:
    > SMICM-Log:
    >
    *** No SSL-client PSE "SAPSSLC.pse" available
    >
    *** this will probably limit SSL-client side connectivity
    >
    > is this a problem?
    Well, since you want to enable the certificate-based user authentication (where your ABAP server is in the role of the SSL server) this does not matter. But if you intend to use your NWAS ABAP as SSL client (for outbound https communication) then it will matter. To resolve this problem you simply create an SSL Client PSE using transaction STRUST.
    Once you've managed to [configure your NWAS ABAP for SSL,|https://service.sap.com/sap/support/notes/510007] you should see (in the ICM trace) that a X.509 client certificate was received. If the certificate-based logon does not succeed, then it's most likely due to some mapping problems - those can be analysed by using the tracing approach described in [note 495911|https://service.sap.com/sap/support/notes/495911].
    If you need assistance in enabling the X.509 client certificate authentication you should submit an inquiry to SAP (message component BC-SEC-LGN).
    Best regards,
    Wolfgang

  • SAP_XI_IDOC/IDOCXmlToFlatConvertor fails with Enhanced Idoc

    Hi All ,
    We have used the PI conversion module SAP_XI_IDOC/IDOCXmlToFlatConvertor in a number of Idoc-To-FlatFile scenarios and it is working fine.
    However recently we tried to use it in a scenario where the target file structure is that of an enhanced Idoc.
    In this case, the receiver channel (where the module is configured) fails with the error message, Idoc metadata not available in ECC.
    We have tried the following:
    1) Checked NWA connection for RFC Destination and JCA connection factory : Working fine.
    2) Loading Enhanced IDoc in IDX2: Working Fine.
    3) Change the receiver agreement to point to a Standard IDoc instead: Working fine.
    Have any of you been facing the same issue and/or could you guide us to a possible solution.
    Thanks,
    Abid Ali

    Hi Ali,
    We are also facing exactly the same issue with a custom IDoc while converting on the receiver side.
    It is actually interesting that the module "SAP_XI_IDOC/IDOCFlatToXmlConvertor" works fine for the very same idoc and fails to recongize the metadata information while converting from Xml to Flat.
    Did you have any luck in getting this resolved?If so,can you please provide the details.
    Thanks
    Narendra

  • EASY COST PLANNING at Network Activity Level

    Hi All
    I am using EHP4 system. I want to do easy cost planning at NWA level for this I already activate ECP for NWA in configuration setting and other necessary settings but still when I create ECP from CJ20N or CJ9ECP I can not able to do ECP on NWA activity level. Please give your inputs on same.
    Regards

    Hi Gokul
    All basic settings for ECP have been maintain. It allow me for ECP on WBS level but it not show me any activity or Network in ECP as I activate Planning for Network Activities with Easy Cost Plan in configuration.
    Regards

  • New BW 7.0 System (ABAP+Java) as two single-stack Systems? How?

    Hello,
    as of the current recommendation not to install a dual-stack system anymore, we are planning to setting up our new BW 7.0 sandbox-system as two single-stacks.
    In my understanding, I have two install two separate systems (1. AS ABAP, 2. AS JAVA) and connect them each other. So each system should have it's own SID?
    Procedure: I first have to setup the AS ABAP with SID=NWA and then afterwards setup the AS JAVA with SID=NWJ - and connect each other afterwards (e.g. RSPOR_SETUP and so on...).
    Or am I allowed to use the same SID(=NWA) also for the AS JAVA (as it is in a dual-stack installation)? If so, am I allowed to use the same system (OS will be windows 2008) for them? In the Installation Guide I found for NW 7.0 EhP2, they still mention the dual-stack installation...
    So, if you have a dual-stack installation, it looks like this:
    Host: nw.sap.company.local / SID: NWA, Instance: 00 (AS ABAP) + NWA, Instance: 00 (AS JAVA)
    How should it look now? Like this:
    1. Host: nw.sap.company.local / SID: NWA, Instance: 00 (AS ABAP) + NWJ, Instance: 00 (AS JAVA)
    2. Host: nw.sap.company.local / SID: NWA, Instance: 00 (AS ABAP) + NWJ, Instance: 01 (AS JAVA)
    3. Host: nwa.sap.company.local / SID: NWA, Instance: 00 (AS ABAP)
       + Host: nwj.sap.company.local / SID: NWJ, Instance: 00 (AS JAVA with EP_CORE, BI_JAVA, ...)
    In case of option 3, do they have to use their own DBMS?
    Thanks in advance!
    BR,
    Markus

    Hi Oliver,
    thanks for you reply!
    >
    Olivier CHRETIEN wrote:
    > Yes, each system (abap and java) will have its own SID.
    > If you have sufficient hardware ressources, it is possible to install these 2 systems on the same physical host.
    It's virtualized using XenServer, so I can decide to use a "large" system/virtual machine containing both ABAP and Java or to have two separate systems/virtual machines... I prefer the second solution (each with it's own DBMS/MSSQL2008) even if it's a "waste" of resources in comparison to a dual-stack system (2x OS/Windows, 2x DB/MSSQL-Server).
    > You could also use MCOD to use only one database instance with 2 schema but I personally don't like this solution.
    > The key to not install anymore as a dual stack system is to have independency between java ans abap.
    I had a look at this also... I think there are no advantages (beside resources), because when you have to do some maintainable at the DBMS (e.g. OS updates), more than one system is affected.
    > The installation will be more complicated than a dual stack but it will be easier to manage, be more reliable, easier to patch and upgrade.
    Maybe, but you need an additional (hardware-)resources - as seen above. But anyway, thanks. We will try with separate hosts.
    Regards,
    Markus

  • Want to download SAP GUI

    Hi,
    I  have isntalled NWDS CE 7.1 in my system. Now i want to install SAP GUI to practice webdynpro for java. Can anyone tell me where i can download sap gui?
    which version is suitable for NWDS 7.1 (Compatible)
    Regards,
    Padmalatha.K

    Hi Matthias,
    it is not possible to connect to a CE system via SAP GUI. For administration and configuration use the NetWeaver Administrator http://host:port/nwa. For web application development use the NetWeaver Developer Studio which you need to install on your client machine, for Visual Composer application development you can use the web front end http://host:port/VC.
    Regards,
    Kevin

  • Error while import SC LM-Tools

    Hi All,
    Im trying to create a track in NW04's system in order to customize the NWA view,for that i have tried importing the track with SC "LM-TOOLS" in that im getting an error in log saying, Repository-import ended with result 'not needed',what is this mean,how can i import it successfully??Any sugestions are welcome.
    Thanks,
    Vinoth.M

    Usually in a 3 system Landscape if you donot import the transport into Quality system till then the respective data/cofiles will not be transfered into Production system,
    So if you donot want to import the TR into Quality system and want to moved into Prd system then you have to forward the TR from Qa system to PRD system queue.
    GO to STMS on Qa system
    Select the queue- Request- Forward- System
    then enter the request number and then forward in the queue of Production system then you will be able to import the TR into Prd system
    Hope this helps
    Regards,
    Subhash

Maybe you are looking for

  • Help Required for Denormalization

    Hi Guys , Need help in denormalising table: SQL > DESC SAMPLE Name Null? Type CNO VARCHAR2(10) CTYPE VARCHAR2(1) CED DATE EED DATE STATUS VARCHAR2(2) REASON VARCHAR2(3) CFROM DATE CTO DATE My data looks like this CNO C CED EED ST REA CFROM CTO 123456

  • Iphoto '11 cannot find photo library

    when I open iPhoto '11 on Mountain Lion it cannot fid the photo libraries it was used to create.  they are in the Pictures Directory but it does seem to recognize that they are there.  This causes problems when I go to syn in itunes and tell it to us

  • Changing my iCloud/appleID on my iPhone

    I have a 5c. It is setup with my old appleid. It asks me to put in the password to log out so I can login with my new account. I don't have a password anymore. That email address is deleted. Can someone help me bypass or delete the old so I can use m

  • Why can't I still get Roboform with the new version?

    You keep strongly advising me to go to the new version of Firefox, but it says it does not allow Roboform. I can't live without roboform, What do I do?

  • [req] mysql administrator & query browser

    anyone thinking about adding it to the repos?