NWA is not opening in PI 7.1 from Configuration & Monitoring tab

Hi All,
When i try opening NWA from Configuration & Monitoring tab, it is not giving me proper results as i do from /nwa in generic scenario. I'm getting message as "No data available to the system selector".
I'm using PI 7.1.
Do i need to configure anything?

Prateek,
As per your information, i have started applying note # 1160261 & while it's application, stuck up for 2nd step-"Note 1226536 - WSIL service gives wrong endpointURL", basically here i would like to know, should i be first doing Template installation step -" Configure NWA for Double Stack System"?
Please any one of you have applied all the steps in Configuration wizard with respect to NWA & NWAPI, then please help me with any of it's documents.

Similar Messages

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

When I click on the new tab button, a new tab does not open or when I go to file new tab a new tab will not open either.

Un-install the '''''Ask Toolbar''''' until Ask fixes the problem caused by their toolbar.
*http://support.mozilla.com/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.com/en-US/kb/Cannot%20uninstall%20an%20add-on

I can not open yahoo mail's link from ipad

I can not open Yahoo Mail's link from iPad.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

Safari will not open or download pdf files from web?

Safari will not open or downlaod pdf files from web? IS there a setting, or something else to do this?

Open browser preferences
ex Safari>Preferences>Extentions and un-enable any ext that mabe interferring , ex divX
or open Help> installed Plug-ins and remove Adobe Acrobat.
if still a problem
Quit Safari.
In the Finder, select Go ▹ Go to Folder from the menu bar, copy the text on the line below into the box that opens, and press return:
~/Library/Preferences/com.apple.Safari.plist
A Finder window will open with an item selected. Move the selected item to the Desktop, leaving the window open.
Launch Safari and test. Its settings will have reverted to what they were they first time you launched it. If it works as expected, recreate the settings and delete the item you moved to the Desktop. Otherwise, quit Safari again and put the file you moved back where it was, overwriting the newer one created in its place.

I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro

Help...
I can not open the mac app store in any way from my mac book pro
please help

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Can not open pdf after saving scan from desk jet 3050

I can open pdf file sent to me but I can not open scanned pdf files I scanned with my desk jet 3050 J610

Hi Marymae07,
Welcome to the HP Support Forums! I see you are not able to open up a saved pdf file once you save the scan with your HP Deskjet 3050. To better assist you, can you please leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. What program are you using to scan, are you using the HP software or another program?
3. Do you get any error messages when you attempt to save as pdf file?
4. Are you able to save the scan in another format like jpeg?
I will watch for your reply, so we can begin troubleshooting.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Can not open a password protected file from OSX2.8 in OSX4.x

I have a few files that I password protected in OSX2.8 that will not open now in OSX 4.6. The are not part of the vault type protection. It seems that the feature of individually password protecting files in the earlier OSX system do not open, nor give the option to even give the password. In the get info window there is no option to change or type in the password. The password is not related to the administrator password and it seems that it was a feature that did not follow through to the later OSX version. The only alternative I can think of is to install OSX 2 on an external and hope it gives me the option.
Does anyone know how to deal with this type of individually protected file in OSX 4.6? I have tried the vault, and the get info, but nothing seems to work to even give me the option to enter a password for an individual file. They are jpeg, and QuickTime, and Photoshop .psd files.
Any ideas?
Thanks

Then it's probably not 100%-compatible with the PDF security standard. You
should post this question on an iText forum.

Photo does not open in Photoshop as before from Iphoto

I have a large library with approx 9700 pics. In the past, I was able to double click on a photo in Iphoto and it would open Photoshop CS (PS). PS opens but the chosen photo does not open. I have also noticed that all of the albums in Iphoto are not seen in the PS file browser and that the photos are in numbered folders that I did not create.
thanks for any help.
joel wilman

Hi jwilman,
To answer your first question:
You must have done an Archive and Install and the Scripting folder for PS did not get put back where it belonged. You must find that folder and put it back in the root library. or reinstall PS to get the folder.
Try this suggestion I copied and pasted from MacFixIt first
"Photoshop CS: Fix for file opening problem Yesterday we reported that since installing Mac OS X 10.4, Photoshop CS refuses to open any new files or create any new documents, reporting a "program error" when one tries to do so. Our previously reported workaround involved re-installing Photoshop CS, but MacFixIt reader Bryan Schappel now offers a faster solution:
"This happens because the Archive and Install option does not copy over a necessary folder for Photoshop. The critical folder is called 'ScriptingAdditions' and is stored in the main Library folder. This folder contains one file 'Adobe Unit Types' that makes Photoshop open files that have been double-clicked or dragged to the PS icon in the Dock.
"Simply move this folder (and file) from the 'Previous System' backup to the Library folder, relaunch Photoshop and all is well again. No need to completely re-install.""
I copied an pasted instead of putting the link in because it is not on the front page and you would have to search around to find it. Hope it is ok to do that here.
To answer your second question:
iPhoto 5 now stores the Album information in a data xml file. The Albums folder within the iPhoto Library folder is no longer used. At some point, usually after a rebuild, you will no longer have that folder in the Finder.
If you need to access photos from an album it is very difficult for a third party application to navigate the iPhoto Library in order to find the photo you need. You will have to know the date of import in order to find the photo.
There are some third party applications that can read the xml file and can navigate the iPhoto library and show you the Albums. Hopefully more applications will be revised to read this file.
Until then you will have to Share/Export the photos to the desktop. You can then navigate to the desktop to use the photos (example: web uploading from online photo site)
If your application supports drag and drop, you can drag the photo from an open iPhoto Library window into your application.
For email you can also use the email icon within iPhoto to open a message with the highlighted photo attached.
You can also use spotlight to find images in an Album...
This is what I have done using Spotlight to find my images that are in iPhoto albums without opening iPhoto..
In iPhoto, select the album, then select all, go to Photos/batch change.
Change the comments to text. In the text field I put the name of the Album.
Do this for each album.
Close iPhoto.
Open Spotlight and put in the name of the Album ( you have to remember the names of the albums or have then written down)
In the spotlight search results. click on "show all"
Under "Images" click on the "xx more" to show all the images in the album.
Make sure you have it in icon view, the icon view box is the last one on the blue images line.
Now you can control click on the image to "reveal in finder", open in iPhoto or Mail, etc.
I am not sure if this is going to make you happy and it is a little more work, but you can find images in albums and even view them in a slideshow (by clicking the play arrow at the end of the Images highlighted blue line) using Spotlight, all without opening iPhoto.
One important thing to know is you can set up a graphic program to be an external editor (when you double click an image in the library} such as PhotoShop or PS Elements. You set up that within iPhoto Preferences. Just make sure you save the image flattened and with the same name. The edits will then be relected in iPhoto when you hit "save".
Two Apple kbs for you to read
Don't tamper with files in the iPhoto library folder
About the iPhoto Library folder
This is a view of how the iPhoto Library looks in the Finder.
It is organized by Year folders. Inside the Year folders are Month folders. Inside the Month folders are the days of the Month. Inside the day folders are the photos you took on that day. If you imported video clips and RAW files on that day they will be in an Originals folder. If you have edited any photo imported on that day, the original will be in that folder also.
Lori

HT4236 Ever since I got the iTunes upgrade, iPhoto does not open and take the photos from my iPhone. I have the older version of iPhoto, so Photo Stream does not work. Can you please help?

Ever since I got the iTunes upgrade, iPhoto does not open and get pictures from my iPhone. How do I fix this? Thanks.

You can stop new photos being automatically added to Photostream in iPhoto from iPhoto preferences > Photostream.

RAW not opening in PS when triggered from within LR

When I select a RAW image in Lightroom, right click and select "edit in" –> "Edit in Photoshop CC 2014", Photoshop launches but does not open my image.
I would expect that it takes me to the Camera RAW module or at least throws me a comprehensive error message but – nothing.
Any Ideas?

Hallo Skandal1986gr,
erst einmal herzlichen Dank für die Antwort und für den Hinweis, dass ich hier auch deutsch schreiben kann. Das macht vieles einfacher.
Neuinstallation ist so ein Thema. Ich würde ja gerne, habe aber fast immer ein Zeitproblem. Muß schließlich arbeiten mit der Software.
Wenn ich jetzt ps cc 2014 dainstalliere, was passiert mit meinen Plugins?
Muss ich die auch alle neu installieren oder erkennt die Installationsroutine den verbleibenden Photoshop-Ordner und "füllt ihn auf"?
OS ist übrigens Mac OS X 10.9.4

Pages will not open a downloaded .pages document from iCloud because index.xml file not found?

New to using iCloud. I created a large pages document on Mac Air and saved it to my iCloud account. Found it at home on desktop Mac and downloaded it. No problem. However, it will not open due to the index.xml file not being found. What should I do to open this document? I've tried several things and no luck yet. Thanks for any tips! :-)

Options posted here: The required index.xml file is missing.
William Farrar posted:
Try this. It worked for me:
1. Single click on the document. This will "highlight" the document icon, but not invoke the error message.
2. Click on "File" in the menu.
3. Scroll down to "Open With".
4. One of my choices in the "Open With" selection is Pages (default) (5.0.1)
5. Click on that choice and the document should open.
In my "Open WIth" selection there is also a Pages (4.0.4), but that didn't work for me.
Now, here is a caveat. If before you open your document you instead first click on an open Internet window, then the "Open With" selection disappears from the File menu. In that case just single click again on the document icon again and the "Open With" selection returns.
fruhulda posted:
Try this:
1. Make a duplicate of the file (cmd D), just to be safe
2. Select .pages on the copy and change to .zip
3. When the System asks if you really want to do this, click Use .zip
4. Double click the new .zip file
5. It will now appear as a folder with no extension
6. Append .pages to the end of the folder name
7. Again click on Use .pages
8. Double click on this file to open it in Pages.
What you have done is extracted all the Pages resources from the .pages "package" and reconstructed it.
or
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=308

Why I can not open jpg and pdf attachments from my mails on my ipad2?

Everytime I receive an email with attachements jpg, pdf I can not open it.
And all pps has no sound.
Can you help me?

Which application do you use for PDF and also how to you import your file to the ipad

Appleworks 6.2.7 will not open and can't boot from Systemworks CD

Received message "need to restart your computer". Now Appleworks 6.2.7 will not open and I can't boot using SystemWorks CD -- keep getting the above "need to restart your computer" message when trying to start with SW CD. I've gone through the troubleshooting steps i.e. safe boot, throw away the prefs file, and have just reinstalled Appleworks from my software restore CD. When I try to open AW I now get message "Appleworks has unexpectedly quit". What do I do now? Suggestions and advice would be appreciated.
Lorne

Unless you absolutely have to open files created in ClarisWorks 4 or earlier or drag & drop in tables, I recommend the first thing you do is update to AppleWorks 6.2.9. AppleWorks 6.2.7 update came out around January 2003 & was the worst update ever. Fortunately, the 6.2.9 updater came out in January 2004 & fixed the issues 6.2.7 was supposed to fix and the ones it caused. You can find the links to the updater on this page where you can choose the appropriate updater for your AppleWorks 6 installation.
Then after updating, delete the AppleWorks preferences as in my user tip Barbara gave the link to.
Peggy

DNG files will not open in photoshop when launched from lightroom

This just started, I can't open DNG files in photoshop when launching from within lightroom. Not sure how to fix this. the dng files launch fine from bridge.

As for your issue with DNGs in CS, did you bother to update ACR to version 2.4?
See the detailed instructions on the download page.
>What I need to know is whether or not my PS CS will work with files converted by Adobe DNG.
Of course ACR will, if you correctly install Adobe Camera Raw 2.4.
No version of Photoshop opens raw or DNG files, only ACR does, hosted by Photoshop. But you do need at least version 2.4 of ACR, which was the first to support DNGs.

NWA is not opening in PI 7.1 from Configuration & Monitoring tab

Similar Messages

Maybe you are looking for