Nwa template configurator stuck

Hi, all.
I am running the PI upgrade template from NWA after the PI 7.3 upgrade. The configuration wizard was prompting me for something and I got to go to a meeting. So I left the screen there. When I came back, my http session was timed out. Now when I logon to NWA to try to pick where I am, all the 3 buttons: start, re-execute, cancel were greyed out. The status of the template is "executing".
Is there anyway to pick up my session from last time?
Thanks,
Jonathan.

HI,
Did you solve this issue? If yes can you please share
Thanks

Similar Messages

NWA : template deployer failed exchange certificate step 47/58

Hi,
I have tried to regenerate certificate expired , but running nwa template deployer failed
setp 47/58& 48/58
import of the BI System Certificate from file system to the J2EE engine
In the NWA, I have java error exception :
Certificates array must have only one element in the TicketIssuerCertificate[1]
I have checked many notes, tried different things but but still the pb.
Did someone have already this error
Best
regards,
thomas

HI,
Did you solve this issue? If yes can you please share
Thanks

NWA template installer required for remote systems

We've installed a NW 7.0 SP13 Java System that will be used for MDM Enrichment. During the installation we specified the Central SLD (a different NW7.0) system when prompted. I can see this new system in our Central SLD under the "technical systems" area. Following the installation, is there any reason to run any or part of the NWA template installers on either this new Java system or on our SLD system? Our SLD system is not being used as the CEN system, so the system will just be administered locally.
I'm trying to understand if any sort of connection data from the new system to the central sld is missing if any of the template installers is not run after the installation.
Thanks.

Hi
Try this link
/message/2333784#2333784 [original link is broken]
Regards

Query - JDI Template Configuration Tool...Please guide

Hello All,
Am working on 04 version and have finished installing & configuration of basic NWDI components.
There is an additional configuration of 'Template Configuration Tool'
And as far as I read...its use is into administration and not development.
Questions:
1. Can I skip this configuration? The installation doc does not mention it as optional or mandatory though.
2. What could be the implications if I skip this step?
3. The description says this tool provides a framework to NetWeaver components to create their own configuration templates.
Please give me some examples to understand this better.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

5.1 Template Configuration Tool
Purpose
This component is a tool for configuring the J2EE Engine and the SAP NetWeaver
components running on top of it. To configure the system properly, the Template
Configuration Tool uses specially designed templates for each component.
You can find the latest information about the Template Configuration Tool and
the related configuration templates in SAP Note 739788.
Implementation Considerations
The installation procedure of the J2EE Engine and the SAP NetWeaver components provides the system with a default configuration. You can run the system using the initial configuration;however, this does not guarantee that the available resources are utilized optimally or that the system will function properly. Using the Template Configuration Tool and the templates provided by each component, you can easily adjust the infrastructure to the particular needs of the scenario that you are running. Therefore, we recommend that you run the Template Configuration Tool after installing the J2EE Engine.
The Template Configuration Tool is run only once for each server instance. If
you expand the cluster vertically later on by adding new instances to it, you
should run the tool on each new instance, so that all instances in the cluster
are configured in the same way.
Integration
While the Template Configuration Tool provides the framework for processing the templates, each SAP NetWeaver component provides its specific template.
Features
The Template Configuration Tool is the framework that enables other SAP NetWeaver
components to create their own configuration templates. You can use the tool to apply and restore a particular system configuration.
You can choose to apply the appropriate configuration templates depending on your
particular scenario. For example, you may choose to apply a template for an Enterprise Portal scenario where you have a portal running on top of the J2EE Engine. Note that this may influence not just the configuration of the component itself, but also the settings of the J2EE Engine.
The tool is instance-based that is, it configures the J2EE Engine based on the available hardware resources on a particular host, as well as some additional settings such as allocated memory. This means that you must run the tool separately for each Java instance that you have installed.
The Template Configuration Tool is designed to automatically detect most of the parameters that are used to define the configuration of the system. The tool provides wizards that guide you through the process of choosing which function you want to use, selecting the appropriate templates, and filling in the required parameters.

Workflow Mail Template Configure

Hello,
In the Workflow Mail Template Configure, we are attempting to discover if we can insert text between the single quotes.
I have a requirement where I need to edit the Approve/Reject/Request More Information in a mail template. The customer wants to have some texts populated in between the quotes in the "Rejection Reason" for the email Template.
e.g-: when click on Reject link form email, my requirement is to add a text mentioned below in italics. This will give the user instructions on what to do....many tiumers they see the single quotes and do not enter in the Rejection Reason.
Approval Action: 'Reject'
Rejection Reason: ' insert rejection reason text here '
Thanks in advance.

You can define a message attribute of type 'respond', then you can see a text field to enter your response comments.

NWA template installer

Hi all,
I am getting the following error while i tried to do NWA configuration through template installer
1 Configuring and starting SLD Data Supplier Bridge Import not successful Element 'SAPConfigLib.DP1.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!java.lang.ArrayIndexOutOfBoundsException: 6:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!153-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
thanks
regards

http://help.sap.com/saphelp_nw04/helpdata/en/43/783dc1eabd1ad0e10000000a114cbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/783dc1eabd1ad0e10000000a114cbd/frameset.htm
Configuration problems with NWA (NW04, SPS17)
reward points if helpful

NWA Template Installer failed

NWA -->deploy and change, Template Installer
scenario: BI-Java
1,create RFC destinations IN ABAP
error msg:
Create Destination in ABAP Import not successful Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW2.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERROR

Hi Shen,
Could you please share the solution. I tried all SAP notes I found with one listed in this thread, but to no avail.
I also faced error in step 12 in addition to 1.
Create Destination in ABAP
Import not successful
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.createRfcDestination':Error during executing Java Reflection:RFC_DESTINATION_ERROR
Import ABAP Certificate to Engine
Import not successful
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.BID.Unclassified.uploadAbapCertificate':Error during executing Java Reflection:Remote call errored
regards, Sean.

Ipad's in Apple Configurator stuck at downloading iOS

Trying update 21 Ipads through Apple Configurator. However they are now all stuck on the downloading iOS. Have tried disconnecting and reconnecting, but it does not let my do anything to them and starts downloading as soon as they connect.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

OBIEE 11.1.1.6 Configuration stuck at 0%

Hi,
Am trying to install and configure OBIEE 11.1.1.6.0
Installation went fine but configuration is stuck on 0% and gives away "Server Timed Out" message. Nothing mentioned in Log file.
Kindly Suggest.
Regards,
Jitendra

Is your MWHOME clean; i mean, is this a fresh install or are you installing on an already existing MWHOME?

Communication error, DI Template Configuration

Hi All,
I am trying to execute DI - All in one template through the Configuration Wizard.
I am facing error Error: Communication error [cause: Unable to open connection to host "xyz:50100". The IP address of the host could not be resolved. Maybe the URL is misspelled or the host does no longer exist..]
Step: Upload Default ACL Settings
The host xyz should be abc and port should be 50000, instead of 50100. First both the systems xyz and abc was there in sld. Seeing this error i deleted xyz from sld, but the error persists. Can anyone suggest where to modify so that it picks proper ACL settings to update, or how can this be resolved. Any immediate answers willl be really helpfull.
Thanks and Regards,
Nuzhat

Hi Nuzhat,
can you please doublecheck your hosts file?
if you have unix, you find it in /etc/hosts
if you have windows, it is in %WINDIR%\system32\drivers\etc\hosts
Enter here:
<IP of the host> <FQDN> <only hostname>
Save the hosts file and restart the install wizard from scratch.
Best Regards,
Ervin

Setting IP Address in VMM Service Template/Configuration

I’m attempting to deploy a VM via a Service Template (Service Configuration) where I would like to set the IP Address (as opposed to it just picking the next available IP address from the IP Pool).
Obviously, I can not do this using “Service Settings”, as there is nowhere in the template for me to declare the Service Setting variable.
Therefore, I presume this should be done by updating the “Service Configuration” just before the New-SCService is executed.
After trying various things such as Granting an IP to the VM Configuration’s NIC - The result of this is that I can see the IP Address being allocated within VMM (Get-SCIPAddress), however when the VM gets created it still pulls an IP from the IP Pool (instead
of using the IP i specified) and Get-SCIPAddress shows that the IP was assigned to a Virtual Adapter that has a different ID to the one I see/set in the VM Configuration.
Any suggestions appreciated!

The ONLY way that you could declare an IP manually (not from an IP pool) is if the NIC properties are set to DHCP and you write a script that manually applies the IP that you pass as a variable.
If the NIC is set to manual SCVMM will (no matter what) take an IP from an IP pool. As that is what 'manual' means in the SCVMM world - an IP is applied not using DHCP, but SCVMM must be in charge of the IP pool to prevent IP collisions.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Task template configuration

Hello,
On my dev IDM environment, I did configure the Update User task template (disabling some approvals) and assigned this template to the Update User task.
Where in the repository can I find the objects with these modifications? My goal is to export that configuration to another environment without having to go in the GUI clicking anywhere and possibly missing one click...
Thanks.

oh right. I re-initialized my repository recently and did not reconfigure that part. That's why I didn't see that. Sorry. And Thanks!
last question: what object holds the information that the Update user template is "assigned" to the update user task?

Can't edit path to template " Configure MS office report"

I am trying to change the path to my template in " Configure MS Office Report" (see attached screen shot)
I can place my cursor into the "Path to Template" field, my keystrokes don't appear.
How can I change the path name? I am setting up another VI on this computer but it needs a separate template.
Thanks,
Bill
Attachments:
Screen shot 4-11-07.jpg ‏968 KB

You need to change the ring selection from "Basic Report for Excel" to "Custom Report for Excel". This allows you to specify your own template.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

P.O iem over view template configuration setting

Hi
I would like to hide the Batch coulm in item overview template (in ME21N .).... this can be applicable for document type NB only........ is it possible .?.......could any one help in this issue..
regards
sesidhar

HI
I know this path..but it is for ...field in value ... mandatory or .. optional ... or display ...
but .. here i want .. hide this field...is it possible or not ....
i think this settings are availabele in me21n iten over view template ..top right side corner ..small configuration button is there ... but how can use this one i dont know
pls... help me on this issue ...
regards
sesidhar

Installation Time Capsule. Airport configuration stuck in a loop due to resetting - quid ?

Recently re-joined apple community with MBA and time capsule for back-up and additional disk space.
My Time capsule never was properly installed, although I did manage to put some documents on the hard disk of my time capsule (so I think). It never gave me the green light, though. Keeps on flashing amber (for 3 weeks now). 4 days ago I pushed the button "reset" in the airport configuration program. Now this program is stuck in somekind of loop, preventing me from closing down the program and shutting down my MBA.
Can anyone help me out? Is there somekind of ctrl+alt+delete fast key that I can use to force shut down of the airport configuration program?
thx

Right Click on the icon down the bottom of the screen.. and hold down option key.. force quit will appear.. it is your crtl+alt+del key combo.
Disconnect the TC from whatever you have it plugged into.. power it down.. hold in reset.. power on again.. and keep holding reset until front led flashes rapidly.. then open airport utility again and reconfigure it.. This time in bridge.. and create a wireless network. update and plug it into the main router by ethernet. Using wireless joining is not really good enough or reliable enough to bother with.

Nwa template configurator stuck

Similar Messages

Maybe you are looking for