NWBC 3.0 Does not open beyond the splash screen

I have uninstalled/re-installed and rebooted many times. Deleted all nwbc.ini files plus anything else I could find.
This NWBC version 3.0 used to work on my PC in Nov and early Dec.
Now all I get is the initial splash screen saying that the program is going to run (and it shows up in my task list for a moment or two) and then nothing. There's no task running, nothing.
I've tried NWBC 3.5 - same problem. I've tried from Run Advertised programs. I've tried uninstalling and reinstalling at least 6 times. Nothing.
Anyone see this ever and can help?
I really need quick response on this!
Edited by: Shelley Schwartz on Jan 23, 2012 5:08 PM
Edited by: Shelley Schwartz on Jan 23, 2012 5:09 PM

Uninstall NWBC , go to REGEDIT --> Navigate to HKEY_LOCAL_MACHINE --> Expand SOFTWARE node --> Locate SAP -- Delete the Folder NWBC.
And
2). Expand HKEY_LOCAL_USER --> SOFTWARE -> SAP --> NWBC - Delete.
Restart the system and try to install NWBC again and check.
Thanks,
Arjun

Similar Messages

My iMac does not move beyond the white screen with apple logo?

When the iMac turns on it does not advance it's start up beyond the 'White Screen' with the apple logo at the center.

the following article addresses the mac booting to gray screen issue you described:
http://support.apple.com/kb/TS2570
you should get resolution from this, good luck!

Win 7 Bootcamp does not boot beyond windows splash screen.

I am Running a Windows 7 bootcamp partition which has been running fine for months, untill today when it now just goes to a non responsive blank screen after the Windows splash screen. I am able to boot the win7 os into safe mode successfully, and also have the bootcamp partition set up as a VM, which i am able to boot into successfully in normal mode. Very odd.
I am running an 2.6GHz i7 Retina MBP with 8GB ram and a 512 SSD
Any help/ideas would be appreciated
Cheers
O.

Quote
Originally posted by Syruel
Thank you to everyone who helped me w/my prob. I got an Antec True Power 430--they didn\\\\\\\'t have any of the 550\\\\\\\'s in stock--and now my system is up and running.
Sadly, I still could NOT boot up the existing OS--I still had the same problems mentioned above--can anyone explain that?
But, I was able to install the OS on a blank HD, which worked just fine for some reason--I just have to reinstall everything now--any ideas as to that?
As for the manual and RAM...screw that...Quote
also do you mean 3 gigs of ram total when you say 3x1gig if so your board only supports 2 gig of ram when it is pc2700...
Yes, I mean 3 Gigs total. I read on Soyo\\\\\\\'s website that it\\\\\\\'s MoBo\\\\\\\'s do that and will only support 3 Gigs at 2100, hence me underclocking my RAM at 266 Mhz. It would have been really useful if MSI\\\\\\\'s documentation would have said the same thing. 3 Gigs at 2700 is the reason my system would NOT even POST. Where did you see that it only supports 2 Gigs at 2700?[/COLOR]
That's not unusual that you would have to do a fresh install of your OS to get it running properly. As far as RAM these boards are very sensitive to types of RAM so You may have trouble with your sticks. As far as 3 1 Gig sticks, unless you are doing some very heavy graphics it is probably overkill and you will find better performance with two sticks running in dual mode. Try it and see which way it runs better for you!
Rob

My MacBook Pro does not boot beyond the login screen. I have a full hard drive. Help!

I Have a 15" MacBook Pro with Retina display. I tried to move files off the hard drive when I got a message warning me that the drive was almost full. I shut down, connected an external hard drive to move some files, but on reboot, the screen went blank (white) after typing in my login details. what else can I try to correct this problem?

Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Empty Trash.
    http://support.apple.com/kb/PH10677
   http://support.apple.com/kb/PH13806
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Repair Disk and Permissions
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
6. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
7. Re-index Macintosh HD.
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

hello suffaman46, please refer to the documentation provided by yahoo for this issue: http://help.yahoo.com/kb/index?locale=en_US&y=PROD_ACCT&page=content&id=SLN2896

How can i setup pages to automatically open when double clicked. Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Currently when I double click it creates cpgz file and does not open. The only way to open pages doc is to manually ask to open with pages.

Hi Karen,
Sounds like OS X has lost the association between Pages and its files.
Start by quitting Pages, then going to Finder.
In Finder, locate a .pages file. Click on it (once), then press command-I (eye, not one) to Get Info.
In the Info window that opens, expand the Open With section.
In this section, click on the pop-up menu and choose Pages (even if Pages is already shown).
Click the Change All button to associate all files with the .pages extension with Pages.
Close the info window.
Double click any .pages file to check that Pages will now launch and open the file.
Regards,
Barry

Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may no

Installed FF 16, 17, 18. Will not open in normal administrator login, nor with "Run as administrator" but will in W7 safe mode. Changed permissions (had to do it in W7 Safe Mode, normal login would not allow (logged in as an administrator) could not delete the Mozilla files in normal login. On rare occasions, with a new install, I could get it to open once, then not again. Searched the reg for any mention of Mozilla or FF and cleaned it. Tried FF safe mode, no luck. Checked permissions after taking ownership and propagating full ownership rights to all FF files, many reboots, no luck. Chrome, IE and SeaMonkey work fine. Using a fairly new install of W7 Professional 64 bit, on a Dell Optiplex 990 i7, 16GB ram. Had the same problem with another user on an identical box. No problem on other computers No other program problems.

I should have been a bit more definitive.
I have uninstalled FF, with the windows uninstaller, by manually cleaning the files and the registry of any mention of FF or Mozilla, and by running Revo uninstaller - always rebooting and checking to see if the files are indeed gone. (I have set windows file preferences to see all files, including system files.) I have run 4 AV/malware scanners and found nothing but a few tracking cookies. I download, from Mozilla.org, (http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/18.0/win32/en-US/Firefox%20Setup%2018.0.exe) a fresh copy of the Firefox Setup 18.0.exe each time and install when logged in as an administrator and choose "Run as Administrator". I get the same result each time I try to open Firefox. Consistently does not open, gives the error: "C:\Program Files (x86)\Mozilla\firefox.exe Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." This happens even when I run the .exe file from the x86 program directory. I have also attempted to run in XPsp3 compatibility mode to no avail,
I make the following assumptions:
The system is not infected
I am doing clean installs
There is no existing trace of FF on the system
I get identical results on one other W7 64 bit Optiplex 990 system with an i7 processor and 16 GB or ram.
I CAN run in windows safe mode with networking.
I have no other software or hardware issues.

After the publication on the hosting page does not open, and the empty html. What's the problem?

After the publication on the hosting page does not open, and the empty html. What's the problem?

NO - not correct. Even if you are still using iWeb 08, you can still publish to another host and not MobileMe. You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
MobileMe will not be here after the end of June, so you will have to find alternative hosting. They are not taking any new subscriptions.
On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11. Both contains iWeb 09, which is what you would want.

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it. Help Please o,

Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.

I cannot get my Acrobat Pro to open. I already uninstalled it and re installed it. But still does not open. The program pops to ask for permission to open the program, but it never actually opens. I trouble shoot it and it says incompatible application.

It sounds like an issue of trying to run XI on VISTA. That combination does not work. Info on both the Acrobat full version (including sub-version) and OS would help. It might also be an issue of running 11.0.0 on a system that needs the updates to work.

TS3276 Mail shows in the doc, but when clicked or doubled clicked does not open on the desktop, HELP !

Mail shows in the doc, but when clicked or doubled clicked does not open on the desktop, HELP !

Try restarting your Mac.
Open Termimal (Applications/Utilities/Terminal)Try entering this command: killall Dock, and then hit enter
Try dragging the Mail icon out of the dock, then let it disappear in a puff of smoke. Then from Applications/Mail try dragging the Mail icon back into the dock, and see if it works.
Does Mail open otherwise? Like if you try opening it from your Applications folder?if it doesn't:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't work: reinstall Mavericks over your current installation.
Message was edited by: arthur

Why Netflix does not open after the new 7.0 update?

WHY Netflix does not open after the new update 7.9?

Vincent149 wrote:
I went to At&t yesterday, they said you have to call Apple support! Which im gong to try today since no one on here has posted anything back! Im frustrated! Maybe its there way of selling new phone!!!!
These are user to user forums. You are not addressing Apple by posting here. If some other person has a solutoin for you, then they will post it.

Firefox does not open all the tabs kirloskar brothers limited portal

firefox does not open all the tabs kirloskar brothers limited portal

Hello,
To find the correct solution to your problem, we need some more non-personal information from you. Please do the following:
# Use ONE of these methods to open the Firefox Troubleshooting Information page:
#* Click the menu button [[Image:New Fx Menu]], click on help [[Image:Help-29]] and select ''Troubleshooting Information''.
#* Type '''about:support''' into the Firefox address bar and press the enter key.
# At the top of the Troubleshooting Information page that comes up, you should see a button that says "Copy text to clipboard". Click it.
#Now, go back to your forum post, right-click in the reply box and select '''Paste''' from the context menu (or else click inside the reply box and press the Ctrl+V keys) to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

My back button does not work because the prior screen does not appear in the history. I therefore must go back to the blue screen and reload safari. Apple tech support could not help. Can anyone else help?

After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

NWBC 3.0 Does not open beyond the splash screen

Similar Messages

Maybe you are looking for