NWBC 4.0 is unstable on IE11

Hi,
I am using Windows 7 and Internet Explorer 11. I have already installed Netweaver Business Client 4.0 for desktop.
Initially, I have accessed to CRM Ides system. But when I logout from NWBC and retry to access, I am getting this error; 'You are calling this web site with a browser that is not supported'.
I only have Internet Explorer 11 for browser and when I try to access the nwbc url from web I can access the system.
Any help would be appreciated.
Merve

Hi Damean,
Thanks for your reply, but I am using NWBC 4.0.
You can find my screenshots attached. I know that NWBC 4.0 is working fine with IE11, but when I try it is not working.

Similar Messages

Very bad performance of NWBC in IE11

Hello colleagues!
I've faced with a bad performance of NWBC in IE11 after update to NW7.02 SP16 GRC10 SP18. According to the pam IE 11 is supported.
When I log in and try to create an access request I get a picture with slow circle
(the message at the bottom of the window indicates that I've switched off all security settings and plug-ins)
After 1-1,5 minute I get a normal screen
If I try select an entry from any drop list or perform any other actions the window hangs with information (Not responding)
Has anyone experienced the same problem in GRC or similar products?
My search results for this issue were not successful.
I suspect that the problem is in NWBC, because webgui works fine, and hope that someone can provide with the corrections.
I've tried to use httpwatch, but it hasn't shown any useful information. I only identified that big time consumption happens when load one page (see below)
Could any one advice how to resolve the issue ?
System parameters:
SAP_BASIS    702    0016    SAPKB70216    SAP - базисная система
SAP_ABA    702    0016    SAPKA70216    Компоненты, общие для всех приложений
PI_BASIS    702    0016    SAPK-70216INPIBASIS    Basis Plug-In
ST-PI    2008_1_700    0011    SAPKITLRDK    SAP Solution Tools Plug-In
SAP_BW    702    0016    SAPKW70216    SAP Business Warehouse
GRCFND_A    V1000    0018    SAPK-V1018INGRCFNDA    GRC Foundation ABAP
ST-A/PI    01Q_700    0002    SAPKITAB7L    Servicetools for other App./Netweaver 04
Regards,
Artem
P.S. notes that I have checked:
http://service.sap.com/sap/support/notes/1717650
http://service.sap.com/sap/support/notes/1674530
http://service.sap.com/sap/support/notes/1937379
http://service.sap.com/sap/support/notes/1926394
http://service.sap.com/sap/support/notes/2016738

Hello Samuli!
I've implemented all corrections up to Corrections for unified rendering 702/17 VII.
Program WDG_MAINTAIN_UR_MIMES shows the following output:
Status
ZIP Archive Path in MIME Repository:     /sap/public/bc/ur/ur_mimes_nw7.zip
ZIP File Prefix:                         mimes/
ZIP Archive Timestamp:                   11.03.2015 16:37:21
ZIP Archive LOIO:                        0019BBCA3D421DEDB6E50FEB0CAFEA8B
ZIP Archive Size [Bytes]:                12.879.368
Deployed ZIP Archive Timestamp:          11.03.2015 16:37:21
Deployment Timestamp:                    11.03.2015 17:09:09
Number of deployed files:                8.161
Deployed version.properties:
urversion:                             7.33.3.80.0
urrelease:                             UnifiedR_03_REL
urchangelist:                          222951
urtimestamp:                           201410291102
urimplementationversion:               03.000.20141028171614.0000
urspnumber:                            00
ursppatchlevel:                        0
urtarget:                              NewYork
codeline:                              $File: //tc1/uicore/UnifiedR_03_REL/src/_version/version/version.properties $
CLUR_NW7=>VERSION_PROPERTIES:
urversion:                             7.33.3.80.0
urrelease:                             UnifiedR_03_REL
urchangelist:                          222951
jschangelist:                          223208
urtimestamp:                           201410291102
urimplementationversion:               03.000.20141028171614.0000
urspnumber:                            00
ursppatchlevel:                        0
urtarget:                              NewYork
codeline:                              $File: //tc1/uicore/UnifiedR_03_REL/src/_version/version/version.properties $
Previously I had 7.33.3.68.0.
So, I don't know what else can do... If I roll back to Explorer 9, the problem disappears, however another user with IE9 experiences the same problem. FF works fine.
Could you give me please another idea to resolve the data?
Regards,
Artem

Web help is not working in ie11

Hi,
I have asp.net application and a adobe robo help 7.I have the WebHelp folder after generate ouput. if run the help help in ie11.. am geeting error at xmldoc.load(). But the
same is working in other browser, such as ie 8 and firefox.
Thanks & Regards,
DIleep

Hi DIleep,
RoboHelp 7 is not supported with IE 11. It only works till IE 8 or less.
Regards,
Mayank

IE11/Win 8.1 error 'Your client does not support opening this list in windows explorer'

I hoping someone might be able to help with this frustrating issue.
I work on a project where we are using various versions of on-line SharePoint (2007/O365). In order to quickly drag and drop folders we need to often open the document libraries by using the 'open in windows explorer view'.
Using the same device, on occassion this works. But often it gives a rather unhelpful message 'Your client does not support opening this list in Windows Explorer'.
I've searched for this issue over the net and confirm that the sites are added to the 'trusted' sites area and that the 'remember you credientials' is checked on logging in.However, the searches do not seem to apply to IE11/Win8.1 or on-line version of sharepoint
(the suggested hot fix is not suitable)
Only this morning, using the same device I was able, for a short while to open in explorer view, and then for no apparent reason, it began to display the error message. I had changed nothing regarding settings or even closed the browser.
Do you have any support/ideas/fixes on how to resolve this.
Many thanks
val

Hi Val,
sometimes an answer can be found on the internet by typing the error message from your computer into your favourite search engine.
eg.
http://www.bing.com/search?q=your+client+does+not+support+opening+this+list+in+windows+explorer&form=IE10TR&src=IE10TR&pc=HPNTDFJS
see
http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
follow the directions given above.... you need to add the domains to your Intranet sites list, not the Trusted sites list.
Perhaps you already have it mapped to your intranet zone....in which case make sure that you have unchecked "Enable Enhance Protected Mode" on the Intranet zone dialog in Internet Options.
If this is happening 'randomly' on client machines, then users are probably changing their internet security settings in Internet Options. Ensure they are accepting the default.... Internet Options>Security tab, click "Reset all zones to default".
Consult with your system administrators to find out if they are applying a custom security template for the Intranet zone... It may be removing the sharepoint domains from the client Intranet zone's domains lists.
HTH.
Rob^_^

Unstable software; Adobe Photoshop CS2; I need to upgrade to CS3; is it available for MAC OS 10.9.4?

How do I upgrade an unstable Adobe Photoshop CS2 to CS3?

CS3 has not been sold for several years... you may now buy a perpetual license for Creative Suite 6 or you may buy a Cloud subscription
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

MSI GTX 560 TI Hawk Unstable?

I have a brand new custom built PC with two MSI 560 TI Hawk cards in SLI and I have a problem with playing games on this system. I've tried Portal 2, Far Cry 2, Two Worlds 2 and The Witcher 2. All games seem unstable with comparable problems:
Random lock-ups for 10-20 seconds with audio looping
Random small jitters, frame drops and stutters, including audio stutters
Sometimes my whole system freezes so I have to push the reset button
Artifacts
Flickering parts of the horizon, sky or ground in the game
Sometimes the game runs fine for a few minutes and then the problems start happening, sometimes they are there from the beginning.
I tried to eliminate possible causes one by one to narrow out the actual problem. Even disabling SLI and running on a single card doesn't help.
Here are the things I tried:
Monitor GPU temperatures with GPU-Z: didn't show anything unusual, around 35 degrees idle to 65-70 degrees stressed
Disable SLI: didn't fix the problem
Download MSI drivers v266.44 (older version than current NVidia drivers): didn't fix it and I couldn't find the SLI option in these drivers so i switched back to v280.26
Check driver and firmware version with MSI Live Update 5: everything seemed to be up to date
Remove graphics cards: cleaning the connections and re-installing, didn't fix it
Stress the cards with FurMark: no issues detected and temperatures seemed normal (70 degrees stressed)
Lower the stock clock speed (950 Mhz) to the standard non-overclocked speed (822 Mhz): this seemed to help at first and the problems didn't occur for a while. But while i'm testing right now Portal 2 froze and stuttered a few times again. Although it seems like it happens less often. So this might be a clue to my problem. Anyway I didn't pay extra money for these overclocked cards to underclock them back to standard so I would like to make the cards run on stock settings (950 Mhz).
Here are my system specifications:
Processor: Intel Core i7 2600K 3.4 Ghz (stock speed)
Mainboard: Asus P8Z68 V-Pro
Memory: 2x Corsair Vengeance 4GB DDR3 CL9 12800 Mhz
SSD: Crucial M4 256GB SSD
HDD: 2x WD Caviar Blue - Raid 0
Graphics: NVidia Geforce GTX 560 TI Hawk 1GB SLI
PSU: Corsair TX750 V2 (750 watt)
I hope you can help me to fix this issue because I'm out of ideas right now....
Thanks in advance
Tandpastatester

Well I've tried some more things but it's all still very weird and not helping at all I will explain my findings in the order i tested the cards this time, after every card-switch i did a clean re-install of the VGA drivers:
Card-2
I've ran the OCCT test for one hour on card-2, i got zero errors and temperature never went above 76 degrees with a fan speed around 68%. After this i tried testing some games again and I found out there were still problems regardless of me saying that card-2 did fine before. In Portal 2 I was leaving the game on for a while and after a few minutes it froze with audio looping. I found out that when I use ctrl+alt+del to go to the task manager and then go back to the game it recovered and I could continue playing (weird??!). The same thing happened with The Witcher 2, freezing with audio loop and going to task manager and back let me continue playing. This happened every few minutes.
Card-1
Now it was time to try card-1 again. This time this card didn't seem to have the frequency problems I mentioned before but the problems didn't go away. Portal 2 let the game freeze within a minute, and I could use the same strategy (task manager) to continue, but this time after a few seconds it would freeze again and again. The same happened with The Witcher 2. Then I tried Far Cry 2 and this game had the same flickering problems as with card-2 but a lot worse... it was almost everywhere. Even sometimes the flickering had a checkerboard kind of shape. Now I ran the OCCT test with this card and there were no problems. Another strange thing was that when I was looking at the graph after the test, the temperature was much lower (65 degrees) and the graph line of the framerate was very straight (stable) along the test. This was different than with card 2 where the framerate and temp were higher and not so stable.
After all it appears i have comparable problems with both cards, only with card-1 they are much worse.

The html select box option is not getting displayed properly in IE11

The html select box option is not getting displayed properly in IE11
I have developed a website that has a select box drop down. The select box drop down is getting displayed properly in IE9. But in IE11, if I am selecting any option apart from the first one, the whole select box option is getting moved up in the page.
In IE11, if option 2 is selected, then the select options is getting moved up. But in IE9, if option 2 is selected, then the select options is getting displayed properly.
Please let me know the fix so that the select options are displayed in the same manner as in IE9.
Sorry but I am unable to upload images as this site is throwing some error

Hi Kevin Shen,
Thanks for post.
I tried above code in ie 11(version 11.0.9600.17633).
But it is not working. If you select option 2, and open select box then it open on the select box.
It should open below the select box.
Code for above:-
<select>
<option>1</option>
<option>2</option>
<option>3</option>
</select>
Sorry I could not attach screen shot. We have normal select box with three options. If we select option 2, it is showing option list on the select box. It is coming below the select box in ie 10 and other browse like chrome.
So what we should do, so that all options will come below the select box?
Thanks,
Yogesh Toke

Excel format difference in GUI and NWBC

Hi Experts,
We have implemented Launchpad with different SAP T-codes. For IW38 tcode.
1. If we execute in GUI and tried to save record in excel. Format is perfect with coloring of columns, without any empty rows or columns.
2. But when we use the same T-code in NWBC, the excel being downloaded doesnt contain cloring and it shows 1 empty colomn and 1 empty row.
End user needs same excel sheet as in GUI. Please help to solve this. Version is NWBC HTML 3.5.
Regards,
Dhanu.

Hi Shrishti,
I am sorry. I should have explained you the steps. Actually, after executing CJE2. You need to double click on report group 12KST1A for S_ALR_87013558 and 12KST1B for S_ALR_87013557.
Now, for both the report groups. Just click on the Output type tab. I am sure that for S_ALR_87013558 report, middle one radio button must have been selected in your case. Just change it to Graphical Report Output OR it would be much better if you just make it available on selection screen by clicking on check button at the bottom.
have a look at the screen shot.
Just do the changes and revert back.
Regards,
Amit Rajoria

New OSX not does not work with RED Rocket Card and old OSX Randomly Logs Out - UNSTABLE

It looks like my MBPR 16GB (MacBook Pro) randomly logs out and causes my programs to quit unsaved. I can not update to the new OSX mountain Lion because the new Apple release is no longer compatible with the RED Rocket card needed for debaying RED Scarlet footage. Mountain Lion causes the RED Rocket to not run correctly with Adobe Premiere.
At the same time, I am on Lion and my computer randomly logs me out and I lose all my work. It seems as though the Retina is unstable.
Any help would be greatly appreciated. Can someone tell me how I can return this. It seems as though I may have to switch the entire company over to PC if this is not figured out soon.

You probably have not received responses for two reasons.
1. There are not many here that know what this is "RED Rocket card needed for debaying RED Scarlet footage"
2. Your post appears to contain some sort of threat to Apple about moving to PCs. You are not addressing Apple here. We are users just like you. We don't care if you change over to PCs.
MBPs and Lion are very stable. Maybe your unsupported third party Red card is causing issues. Their answer seems to be that Mountain Lion is not supported. I wonder why?
My suggestion if this is a business environment is to not mess with this. If you know for a fact that your Red card works with PCs, change over to PCs. I know that if some tool was not working for my business I would not hesitate to get something that worked.

Sharepoint Foundation 2010 / IE11 Error when loading aspx page

Sharepoint 2010 throws an error anytime a user tries to access a specific page (instead of the main URL share.domain.com) through IE11. Chrome appears to be uneffected. It's driving me crazy trying to figure it out. It's also effecting One Note as we're
no longer able to sync with Sharepoint hosted OneNote documents.
Does not work:
http://share.domain.com/Lists/Digital%20Marketing%20%20Tasks/AllItems.aspx
http://share.domain.com/IT%20Wiki/Home.aspx
Does work:
http://share.domain.com/Lists/Digital%20Marketing%20%20Tasks/
http://share.domain.com/IT%20Wiki/
Here's the error from the logs:
Timestamp
Process
TID
Area
Category
EventID
Level
Message
Correlation
10/22/2014 11:50:15.63
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Name=Request (GET:http://share.domain.com:80/IT%20Wiki/Contacts.aspx)
a5c139bd-0232-4164-871e-c5687343b897
10/22/2014 11:50:15.63
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Runtime
tkau
Unexpected
System.InvalidOperationException: Operation is not valid due to the current state of the object. at Microsoft.SharePoint.WebControls.SPControl.EnsureSPWebRequest(SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
a5c139bd-0232-4164-871e-c5687343b897
10/22/2014 11:50:15.65
w3wp.exe (SERVER_NAME:0x0714)
0x1BD8
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://share.domain.com:80/IT%20Wiki/Contacts.aspx)). Execution Time=13.1097
a5c139bd-0232-4164-871e-c5687343b897

HI Shaun,IE11 is having some know issues with the share point.Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit.
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

P7N SLI Platinum Unstable with over 2GB ram and/or dual channel memory on.

Hello need some help or to report something to MSI regarding blue screens, freezes when booting Vista 64 (SP1 + all fixes installed) with more then 2GB ram. Single channel mode works (either 1 stick of 2 GB or 3 sticks of 2GB) and is rock stable. Booting with 2 x 2 or 4 x 2 yields instability and blue screens.
I read over Microsoft's hotfix KB929777 however it appears this patch was applied during SP1. http://support.microsoft.com/kb/929777 - when I attempted to apply this hotfix I got the message this update does not apply to your system.
Memory tested in other gaming system using 4 sticks of G.Skill 1066 DDR2 ram and still have the same issues. Other forums like Evga.com, Tom's hardware and 411overkill.com tend to suggest some problem with this new bios version 2.0, written by Nvidia. Some others mention possibly an Nvidia nforce driver issue.
Therefore, under duress during testing - with 1 stick or 3 sticks of ram, all tests perfect and passes all stability tests, good marks in Sandra, plays any game. With 2 or 4 sticks of ram, very unstable won't stay up but for seconds.
Any ideas? (Tested 7 ways until Sunday!)
My other rig, rocks solid and stable with Vista 64.... It's the Evga new mainboard 780i with triple SLI (132-CK-NF78-A1), 8gb of Gskill 1066ddr2, MSI 8800GT (x2 sli mode) Q6600 @ 3.2 ghz - Raid 0 on dual WD caviar 640 gb/sata 3.0gb/sec. Seasonic 700w p/s. 8gb of memory and not a hiccup. Ram 2.0 volts, cpu @ 1.36v. Will handle the memory from both systems with out fault.
Considering I can swap memory back and forth and confirm it's not the sticks, swap graphics boards (own 3 of them!) and rule out that....
Fyi. Any help is appreciated!

Dump question, but have you pickup the correct update e.g. for 64bit? ==> http://www.microsoft.com/downloads/details.aspx?FamilyId=91672C7C-614B-404C-850C-377541E93C18&displaylang=en
"This comes inside SP1 for vista 64, as noted with my other system during the build. "
Better double check it.
Install all four memory sticks and do a memory check with >>Memtest86<< 1st, ensure that no error(s) will comes during testing.
Also how about that?:
Quote from: BOSSKILLER on 07-April-08, 23:55:36
Remove your OC then see how its goes.
"When the system boots in single channel mode (only 2 or 6gb of ram meaning 1 or 3 sticks installed into the 4 slots) its' rock stable. When it boots into dual channel mode (2 x 2 sticks or 2 x 4 sticks) extemely unstable. "
That means, timings are too tight, or they need a bit more vcore help, or some of the memory stick has failure.
"MSI P7N SLI Platinum - MS-7380 - Bios 2.0 on Vista Ultimate 64-bit - all updated."
That BIOS is not for your board, you should use 1.xx

Internet connection is Unstable...???

Today makes the third day I have had My new Samsung Galaxy S4. I upgraded from An S3, and I absolutely love these devices - but whatever you do, DO NOT UPGRADE TO THE GALAXY S4. Sadly, I will be returning this one and going with something, ANYTHING that doesn't use Android 4.3, 4.4, whatever. You will absolutely regret getting this device - unless you never use Wifi. The OS parameters that determine a Wifi internet connection is unstable is entirely too sensitive. It keeps giving me the message "Your internet connection is unstable", and I have no data unless I use the mobile network. It connects to the Wifi no problem - it just refuses to use it. Never had this problem with my S3, and no one else here has any problems with their devices. A quick Google search under 'internet connection is unstable" reveals a torrent of unsatisfied consumers, and no one - manufacterer, programmer, or carrier service provider - will even admit that the problem exists. ALL OF THEM reported not having received any complaints about this issue - despite finding it specified in forums on their own websites!! I have been in contact with Samsung customer support, and despite the torrent of discontent readily apparent on the internet, they would not even acknowledge the issue! The attempted "fixes" I was encouraged to try were the exact same unsuccessful efforts described by other unsatisfied customers. Everyone is playing dumb, like a sad shell game where the consumer is going to be left holding the bag. And by bag, I mean a service contract you're trapped in for two years and a device that will not operate. Will there be an update to resolve the issue? A "fix" in the immediate future? Will Android ever admit that the software needs to be revamped? I would love to think so, because I think these are the most incredible devices - but nothing in my dealings with the industry thus far inspires any confidence in such a resolution, and I personally am not willing to gamble on a "maybe they will resolve it, maybe they won't". I will be exchanging this device before my grace period for a new one expires. If anyone knows something that I don't, I would love to be wrong about this, because, as I said - these are truly great devices.

Nomadicus,
The solution that ClarkKent62 provided worked fine for me also. That particular "feature" was added to supposedly make sure that users always had a good internet connection. As stated above also, it appears as though to be more suited to make sure you expend a maximum quantity of data on the Carrier's Network. That being said, since I turned off the "Auto Network Switch" setting, I haven't had the "Unstable Network" issue. The WiFi that I use during the day is spotty at best and I was always having it switch back to data, but after changing that setting I haven't had the first issue. Remember the target audience for the S4 was business. That is why some of the bloatware installed isn't something that an individual would ever use and in a business situation, the auto switch would be more desirable than a poor connection.
BigRedGonzo

Problem with flash on IE11 after using adobe cleaner

Problem with flash on IE11 after using adobe cleaner to remove a trial version of photoshop because there was not any entry on add/remove applications in windows 8.1
Its to frustrating to reinstall everything. I tried everything from your support page with no luck…

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

System unstable - MSI 785GM-E51 and OCZ3G1600LV2G

I had random freezes since I built the system(20 days ago). But, intially freezing up once a day or so. Recently in the last 10 days, the freezes are more often (sometimes within 5 to 10 mins). Basically system freezes at stock settings.
Running Prime95 to test
Blend test stops mostly within the first few seconds reporting hardware error. The other two types work well. Did not let them go past few mins.
Also, changed the CPU to FSB ratio to 1:4. So, BIOS indicates 1600Mhz. Changed DRAM Voltage to 1.65V and system still unstable. Changed back.
Also, when I enable the MSI board features to Unlock CPU and ACC, the sytem does not boot under and stock settings.
MSI 785GM-E51 BIOS 2.4 (had 2.3 before)
AMD Athalon X3 435
4GB RAM (2x2) OCZ 1600Mhz DDR3 OCZ3G1600LV2G (recommended voltage 1.65V)
1TB Hitachi SATA
Samsung 22x DVD/RW
Enerma 05W power supply ETK405AST
ETK405AST

Run a test @DDR3-1066 first.
Quote
OCZ3G1600LV2G
The model number is incomplete (not possible to find any match on the OCZ Product Pages).
Can you write down the model number as it appears on the modules themselves?
Quote
Voltage 1.5V (Mfg specs.. say 1.65V)
Those 1.5V do not indicate the voltage set in BIOS but the JEDEC Compliant default voltage for DDR3 modules (1.5V +/- 0.075V). 1.65V is an overvoltaged rating that is needed to compensate the overclocked/undertimed ratings OCZ adverises for those modules.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it.

I am trying to finish a book in InDesign CS2 with another person. My old XP computer became unstable and I had to get a Windows 7 computer. I was able to install CS2 on the Virtual XP Machine on my Windows 7 computer, but I cannot register or activate it. Adobe no longer supports activation. Is there a way I can keep using CS2? I need to get files back and forth to my coauthor. I also have CS6. I understand that files can go form 2 to 6, but not backwards. Thanks Robert

you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads

NWBC 4.0 is unstable on IE11

Similar Messages

Maybe you are looking for