NWBC 4.0 : pinning tabs language dependent

Dear experts,
I had some strange reaction when pinning tabs, being logged into SAP with different languages.
Whatever the language I log with in with to NWBC 4.0 PL13, the tabs I pinned stay in the language I was logged in when creating them.
I pinned a tab when being logged in English, another when in French.
When afterwards connected to SAP in Dutch, the pinned tabs showed all screens and additional tabs opened via OBN links in French or English.
Only the newly opened sessions are in Dutch (the login language).
Any solutions ?
Thanks,
Dirk

Dear Dirk,
please open an OSS incident with a detailed description and with open R/3 and HTTP connection
Thank you and best regards
Melinda

Similar Messages

How to display the 'language code' for language dependent 'Short text' ?

Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS   [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
Sekhar

Dinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID                TXTSH                 TXTMD
P01                                   umbrella                 rainyday
P02                                  tent                         waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar

Language Dependent Master Data

Hi,
I Have a Info object which has data for more than 1 language, How do I control the text of the info object by language.
Thanks in advance.

Hi Kiran,
I agree with suman...
From the below tab check mark the option " Language dependent texts" in your IO.
Master data texts are language dependent (flag)
If this indicator is set, then the texts of the text table are language dependent and the text table has the language as a key field. This is also the default setting.
If the indicator is not set then the text table does not have a language field and the texts are not language dependent.
Regards
KP

LANGUAGE DEPENDANT TEXT

WHAT IS THE USE OF MARKING TEXTS AS LANGUAGE DEPENDANT UNDER THE MASTER/DATA TEXTS TAB WHILE CREATING CHARACTERISTIC INFOOBJECTS? AND HOW DOES IT AFFECT THE TRANSFORMATION?

This option is there to help load different language text for same master data. Say there is one material and this has it's description maintained in 3 languages. And based on users login language we want the language to be selected in report as description for this master.
So, in this case language dependent text can be used.
Now say the data to load from source is coming with master value and the description and the language key (EN for English, DE for German, RU for Russia and so on and so forth).
Scenario for 3.5
=============
To load the Text for this material you can use this data. Add 0Langu, Master Object and 0Txtsh (is you are using short text or accordingly Business Object for long and medium text) in communication structure.
In transfer rule map master object with master data field, 0Txtsh with description data field and 0langu with language key data.
If only one data key say EN is there and so language key is not part of incoming data then you can just set that language key, EN in our example, as constant value.
Scenario for 7.0
=============
For this also the mapping will be same. Only that the mapping will have to be done in Transformation.
Hope this helps!!!

Language Dependent Text datasource

I have a language dependent generic text datasource mapped to my language dependent infoobject in BW. In my source system, I have 68 records; 34 English and 34 French. I am only pulling 34 English records to BW but not the 34 French records. In my extractor checker (RSA3), I pull all the 68 records. Any reason why I am not pulling all the records from the text table. To reiterate, I have the flag "Texts language dependent" checked in my text infoobject. What is the reason why I am only pulling 34 English records and NOT all the 68 records?

1. Check the selections at the Infopackage level whether you are pulling only EN or there is no selection at the language field... in the data selection tab.
2. Check whether your system is unicode or not? Use RSCPINST program to check the same and also check French language is already installed in your system.. Execute the program, you can see the installed languages in left side and and uniode (*or non unicode at right side).
3. Also check the program in R/3 system and based on that we can conclude the next step...
Hope this helps..
Murali

Pinned tabs stay highlighted

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1029649 /questions/1029649]''
I use pinned tabs for Facebook, Twitter, and emails. The blue highlight feature for new notifications is staying on continuously even though I've addressed the notifications. This is a recent development in the last week or so.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I resize pinned tabs/deal with tab group problems in Firefox 22?

With the automatic update to Firefox 22, my pinned tabs have ballooned in size; not only does this look horrible, but it reduces the real estate available for other tabs. While NoSquint has sorted the issue with websites randomly resizing themselves, everything else (add-on menu, toolbar icons) has also increased in size, which affects what can be displayed.
Another problem with 22 is that my tab groups are no longer behaving normally: I click on one group and another group moves around the screen, typically jumping behind the original group I clicked on. Any suggestions for how to improve these problems are much appreciated.

hello, firefox 22 is now respecting the pixel density you've set on a system level in the windows control panel > appearance > display. more information about that is availbale at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller
if you want to set the text size/pixel density in firefox different from that of your system's settings like it was handled in prior versions, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''. double-click it and change its value to '''1.0''' (or any other zoom factor that fits your purpose; 0.8 equals 80%, 1.15 is 115% and so on..., -1.0 is the default value and will adhere to the system settings).

Why does my first pinned tab always load as the google play store when I don't have that saved as a pinned tab? This happens to every site pinned in first tab.

This happens no matter how many tabs I have pinned and no matter what site is supposed to be in that first pinned tab. If I close that tab and close and reopen firefox, the next tab in line that became first now loads as the google play store. I can see that for a couple seconds it starts to load the correct site. Then it loads the google play store instead.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Is there a way to close a pinned tab without unpinning it or closing the browser completely?

when i have one of my pinned tabs opened and i open a new tab, i cant find a way to close the pinned tab without closing the browser completly.
is there a way to close a pinned tab?
thanks.

You can also middle-click a tab to close that tab and that also works for pinned tabs.

WHy do my pinned tabs not come up when I reopen Firefox?

I have pinned my email and internet radio in the tab bar. After I exit Firefox 4 and then return - the pinned tabs are no longer there. Also the "ghost" tab with the + sign (to open a new tab) is missing at the right side of the tabs in the tab bar...where did it go? I have to hit the button in the Navigation bar...dont like that.

Another issue that manually creates this problem:
Open browser with the App Tabs
Open a second browser window (no App Tabs here)
Close the first browser window using the top-right 'X' and then close the second browser window the same way (all browser windows are closed now)
Reopen the browser & the App Tabs are gone.
Although I rarely do this, sometimes I'll be working on multi-windows & forget the order of closing. I solved this my getting the "Toolbar Buttons" add-on [ https://addons.mozilla.org/en-US/firefox/addon/toolbar-buttons/ ] and putting the "Exit" icon in my navigation toolbar & had to train myself to use that to exit Firefox. Now I don't lose my App tabs.

It's possible to put tittle in the header of pinned tabs?

I have son pinned tabs, but his headers are only favicons. If I need to have some pinned tabs from the same site all of the looks the same.
It's possible to have a tittle on the tab's header like a normal tab?

Pinned App tabs only show the favicon and not the title text to make them take as less space as possible (they won't scroll if you've opened a lot of tabs).
You can consider to create your own favicon or modify the current favicon and use that instead. 
That probably only works if you bookmark the link.
*Bookmark Favicon Changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/

Problems with language dependent master data

Hi,
I created a InfoObject with language dependent master data and I am trying to upload data from a flat file.
My flat file has a 2 digit language code (EN,DE,FR,JP,ES) and when uploading the data it seems that SAP BW is only using the first digit which leads to the situation that EN and ES get treated as duplicate records.
Any help would be appreciated
thanks
Ingo Hilgefort

Hi,
ES is the Language for spanish..But the Flat file should have to represent 'S' for Spanish.
Check in Table T002 for the symbols which represent Languages and that to be used in flat file.

Text in abode form as language dependent

Hi all,
I have a text field Statement for detailed analyisis report of the Account. It's static text value.
The title in the text field needs in 2 lines for language "DE". Currently it is in EN.
How can I make the text field as language dependent.
Regards,
AVSP..

Hi ,
First two static text and place in the same place.and make two subforms for each.as u cant write script on the static text.
get the languange on the form.do visible and hidden based on the language.
Thanks,
Madhukar..

My pinned tabs are not saved. Changed the settings still does not work?

This changed before upgrading to the new version of FRFX. I cannot save my pinned tabs, nor does Firefox open to the last tabs open. Tried to change Settings...still does not work.
I have a new iMac 3.4, i7, 16g for video editing. Its running LION 10.7.2

Well that was odd, decided to check addons and started firefox in safe mode and my pinned tabs were there so restarted it to disable addons one by one but before I could do anything my pinned tabs were back in place. Lets hope it lasts.

How to disable the Language dependent option for 0PROJECT and 0WBS_ELEMT

Hi Friends,
            Some Info Objects are re installed in latest version that's why DBW and QBW is not sinked. that's why giving transports errors.
           In DBW both Info Objects(0PROJECT and 0WBS_ELEMT) having the option text language dependent is checked. I go for disable that option it is not accepting to disable.
          when i am going to delete the data from both the info objects it's not deleting the data from both the objects. it is giving message some master data is not deleting.
       Please give me solution for this how to disable text language dependent option for both the objects.
   I am waiting for your valuable replies.
Thanks,
Guna.

Hi Rajesh,
          i did that changes in RSD1 but not accepting that change.
It is showing the error message for The Text Table /BI0/TPROJECT must be converted incompatibly with an activation of characteristic 0PROJECT (changes to the key in the table). Table /BI0/TPROJECT contains data. Parts of this data were lost in the conversion.
Please give me help for solving this issue.
Thnaks,
Guna.
Edited by: gunasekhar raya on Mar 24, 2009 11:58 AM
Edited by: gunasekhar raya on Mar 24, 2009 5:42 PM
Edited by: gunasekhar raya on Mar 24, 2009 5:43 PM

NWBC 4.0 : pinning tabs language dependent

Similar Messages

Maybe you are looking for