NWBC Desktop running GUI for HTML

My NWBC Desktop installation is running all SAP transactions using the SAP GUI for HTML. How can I fix my NWBC installation to use the desktop SAP GUI instead of the GUI for HTML?

First of all a supported SAP GUI for Windows version needs to be installed, it is best to go with the latest one which is 7.30 PL 9. That said at least 7.20 PL 8 is required. Secondly you have to maintain connection entries both in SAP Logon as well as NWBC connections. Thirdly make sure that in NWBC connections the SAP GUI Logon Description field matches the description of the same system in SAP Logon. If it still isn't working, activate trace in NWBC and share the result as an attachment, not embedded in the body of the message.

Similar Messages

GUI for HTML on MC9090 WM5

Hi everybody,
I'm playing with a MC9090 Handheld and would like to know if it's possible to access SAP (ECC6) through the GUI for HTML interface from a Netweaver Portal environment or else directly to ECC if this is the only way it can work.
Currently when I enter the ECC address on the Handheld, I get the Netweaver Portal screen, enter my credentials and get a blank screen (if I do the same on my laptop, I directly get a SAP session). On the Handheld, I'm running Windows Mobile 5 and attempting to access ECC through Pocket IE. I tried with another browser (Opera) but then I get a message when attempting to display ECC that the page is incompatible with the browser.
Any information around software setup, handheld config (or Portal or ECC) I would need to perform ot make this work would be greatly appreciated.
Thanks in advance
Michel

Dear Michel,
Full desktop browsing is expected to come to PIE before second half next year for Windows Mobile 6.1 and Windows Mobile 6.5 (yet to be released). Till that time we cannot use GUI for HTML on PIE of Windows Mobile devices.
In Opera Mobile 9.5 - use opera:config to change / spoof the user agent to Desktop IE6 (agent id 3 if I am not wrong). This should allow you to use GUI for HTML, but some fuctionalities willbe broken - thanks to browser specific coding!
Regards,
Veera

Connect to SAP R/3 using SAP GUI for HTML through saprouter

Hello,
I have my system running on my intranet, but I need to connect some support enginners through an Internet connection. Nowadays some users can connect to QAS and PRO systems using SAP GUI for windows and java with the saprouter string, but the support enginners are using SAP GUI for HTML, do I need a special string or configuration so html users can connect to my system from the Internet?
Thanks in advance.

thanks, I can get the data from SAP R/3 to crystal report.
but still dont know how to do the second question mentioned in previous message:
once the table I want to get the data from is a cluster, and have found the mapping data dictionary of this data cluster, which displayed in crystal report connection as well, however, the data is not what I wanted.

ALV GRID and Integrated ITS 7 (SAP GUI for HTML) - dissapears on reload

Hi All,
We have a custom report that uses an ALV grid to display information to the user. Within this grid, there are fields that are display only and fields that are editable. Also, the grid is wider than the screen's width. It works fine in ECC. It also worked fine when we were using ITS 6.4.
We have recently upgraded to ITS 7. Now when we run the report using a Transaction iView (in EP 7) or the Webgui service (SAP GUI for HTML), if a field that is editable has focus when an event is triggered that reloads the grid, the screen becomes blank. So, you can click the Save button and the screen goes blank, also, there are date fields in the grid and if you choose a new date, the grid reloads and the screen becomes blank.
We have found that when the screen is blank, you can use the "Page Up" button on your keyboard and the last few columns of the grid will appear. As if the entire grid has moved off-screen to the left.
If you click onto a non-editable field and refresh or save, the grid returns to its normal state.
We are on Basis Patch level 15.
Does anyone have any ideas on how to fix this?
Also, does anyone know of a standard SAP transaction we can call from the Webgui that would have a similar setup...with an ALV grid containing editable and non-editable fields? We would like to rule out any errors in the report itself. Since it worked before we upgraded and it works fine in ECC. This would be a really big help too.
Thank you so much!
-Kevin

Hi,
Thanks Raymond, I have seen Note 314568. I could not get the second link to work but I have looked at just about every Note in reference to Integrated ITS 7 and Tables or ALV Grids and there are very many, so it would appear that SAP has had a hard time with implementing this control, but I have not seen any instance that matches the problem we are having.
Unfortunately, SAP will not investigate this unless we can provide a standard Transaction that exhibits the same behavior.
If anyone knows of a standard SAP Transaction that displays an ALV Grid that is wider than the screen (requiring a horizontal scroll bar) and with editable and non-editable fields, that would be fantastic. If we can test against that, then we would know for sure if this is a problem with ITS / SAP GUI for HTML, or if there is an issue with this specific report.
Thanks!
-Kevin

Transaction iView - SAP GUI for HTML-blank on some systems

Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
Reena

Hi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick.

The page cannot be displayed: ITS error: SAP GUI for HTML

Hello,
I have created an iView that connects with a ECC system. When I clic on System Administration --> Support --> SAP Application --> SAP Transaction :
System: ECC
Transaction: su01
SAP GUI Type: SAP GUI for HTML
It shows: The page cannot be displayed.
It's manadory to use SAP GUI for HTML. Please, Do you have any idea??
Thank you
Best,

Hello Virginia Rodríguez,
1)Kindly check that System ECC in Portal is Up and Running under System Administration.
2) if u r done with first step then can try SAP GUI for Window in creation of Iview
it will Work.
Regards.
Soni Vinit

Required input on GUI for HTML vs Windows

Hi,
We are now on 7.02 and have seen that a required input field in SAP GUI for HTML is shown as an *, but on SAP GUI for Windows is shown as a checked box icon. Is there a way to make them the same? Our clients run reports in ECC and via the Portal and have complained of the inconsistency.
Thanks,
-Kevin

Hello Kevin,
you might want to ask this in , which is the forum which is about SAP GUI for Html. That forum is monitored by the resp. developers.
Best regards
Rolf-Martin

BBS BEX Query to R3 Transaction - Connect to SAP GUI for HTML not to R3 Backend-TA

Hi Experts,
I try to customize a report-report-interface from a bex query to R3 transaktion fs10n.
I configurated everything in TA RSBBS within BI.
When I start the BBS from the BEX Query a browser session opends, I have to enter the login data for the R3 system an SAP GUI for HTML is started.
Several years ago I tried the same and was connected directly to the Backend-Transaction within R3.
Was there a change within the last year?
Is it possible to configure somewhere in R3 or BW that I want to be tranferred to the Backend-TA and not to open a SAP GUI for HTML?
Can someone help?
Best regards
Mirjam
(SAP Netweaver 7.31 -> SAP ECC 6.0)

Hi Stephen,
You should try running one of these transaction iViews using Firefox and have Firebug installed (or use HTTP watch in IE). This might show you why the styles are not being loaded, it could be that since the upgrade something has changed in the SICF configuration settings that is blocking the download of the CSS... that is just a guess, but if you use a tool that will show you the HTTP traffic (like Firebug) then you might get a better idea of what is going on.
Hope this helps,
Simon

Writing files in your local hard disk with SAP GUI for HTML

Hello SAP Experts
We have a problem with the SAP GUI for HTML, we create a program in ABAP that writes a file into your local machine, and it works just fine when we test it directly in the SAP GUI for Windows, but if we use the SAP GUI for HTML implementend in a SAP Portal 7.0 the same program doesn't run, it just freeze in the moment that the program must create the file, so my question is if it's possible to use that functionality in the GUI HTML, or do you have another suggestion???
Thanks a lot,
Ricardo Pineda

Thank you experts,
Your answers have been really helpfull, we have to try another method, by Studio Program or ABAP code, unfortunely we have to implement this in so many computers, so is impossible to configure one by one.
Thanks to both, and have a nice 2009!
Ricardo Pineda
Edited by: Ricardo Pineda on Jan 13, 2009 2:09 AM

SAP GUI For HTML - Keyboard Navigation

Hello,
I have a transaction iview (tcode - FB50) and it runs on SAP GUI for HTML. I have 2 queries.
1) In the table i can use tab key to jump to other columns. But i am not able to select dropdown values through keyboard. Is that a limitation ?
2) After selecting a dropdown through mouse, i am not able to go to the next column by pressing tab.
Is their any solution to this ?
Any help will be much appreciated.
Thanks,
Abhishek

Dear Abhishek,
Using SAP GUI for HTML has some limitations.
One cannot expect to have the same behaviour 100% exactly like you have on SAP GUI.
So I'm afraid the issues you mention belong to those limitations.
But please do make further research on OSS to see if you can find any alternative or recent improvement by SAP.
I for myself don't know any.
Kind Regard
/Ricardo Quintas

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Report painter report in portal - Excel output in SAP GUI for HTML

Dear sirs,
I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
thank you for your time and effort,
regards Otto

Hi Otto,
You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
Regards,
Eli

Problem while printing from SAP GUI for HTML

Hello,
We are trying to print a delivery confirmation from the portal using SAP GUI for HTML. We have followed note 771683 to do this. However we are facing the following problems:
1) The print action(PDF creation) is not triggered until the user performs some action
2) the PDF that is created is corrupted(does not open)
In order to correct this we tried to implement note 957292. However, the changes to the object FRONTEND_PRINTPOLL_FRONT_REQUEST.HTM mentioned in this note created problems. So we decided to do the changes to this object manually. But we see that the SAP note doesn't contain any information on changes that should be implemented for this object.
Question:
Is the note 957292 only way to solve the printing(PDF) problem? If not, how can we trigger the automatic creation of the PDF and remove the error from the PDF file?
If yes, any idea what is causing the problem during the note implementation?
We are on NW2004s - EP7.0 SP10
ITS 7.0
Thanks in advance.
Regards,
Reena

Hi,
configure printer in SPAD , no setting for JAVA GUI
check note
605467:SAPscript/Smart Forms: Print preview in SAP GUI for Java
634158 SAPscript/Smart Forms: Print preview in SAP GUI for Java (2)
1024624 SAPscript/Smart Forms: Print preview in SAP GUI for Java (3)
regards,
kaushal
regards,
kaushal

Change standard SAP GUI for HTML theme to portal theme

Dear Experts,
I have created transaction code for SAP GUI HTML for a custom report program developed in SE38.
We have created a URL iView in Websphere enterprise portal. The Transaction executing well and there are no issues.
But the SAP GUI HTML uses SAP Standard theme. I wanted to change the input field background color which is similar to our portal theme.
Please let me know , how to change the theme of the standard SAP GUI for HTML.
Thanks in advance.
any solution will be greatly appreciated.
Best regards,
Prabhu

Hi Sushil,
Could you please elaborate in detail with steps.
Thanks for your help .. Greatly appreciated...
Best regards,
Prabhu

Store Business Document via SAP GUI for HTML

We are trying to use SAP GUI for HTML via UWL in Portal to deliver Workflow. When we try to attach files for the "Store Business Document" step, it gives an informational message "Store business document Access via 'NULL' object reference not possible" but the documents themselves never get attached. We are on ECC 6.0 and Portal 7.0. Any help is greatly appreciated.
Thanks!
- Rao

I've found a working solution a minute ago: See SAP Note: 510007
Best regards
Danny

NWBC Desktop running GUI for HTML

Similar Messages

Maybe you are looking for