NWBC for HTML: Warning with IE 10

Hi,
When I open NWBC for HTML in IE 10, I get a warning saying "The standards mode is not supported for document modes less than 8 (Note 1970689)".
If I hit 'Ignore', everything is fine. How can I get rid of this error?
Thanks
Krishna

Simon,
IE is trying to use "IE8 Standards". If I change it to "Standards" I do not have any problem. But obviously I do not want user to change it every time they use the NWBC.
I added parameter sap-ie EDGE for NWBC_LAUNCH node. Still no luck.
Compatibility settings are empty and no checkbox checked.
I am on 740 SP5 and already applied
SAP Note 1970427 - SAP GUI for HTML: Rendering problems
SAP Note 1926394 - SAP GUI for HTML: Rendering mode update
Any clues?
Thanks in advance
Krishna

Similar Messages

Tab - 'Activities' in Create Notification missing in NWBC for HTML.

Dear Members,
Greetings for the day!
I am working with NWBC for HTML as a part of EAM implementation in my project.
When I am trying to create a notification in SAP GUI via the transaction - IW21, I am able to see a tab namely - "Activities".
But this same tab is not available when I am trying to create a notification using NWBC for HTML in the same SAP system.
Please refer the enclosed screen document in which I have highlighted the issue.
Could anyone please suggest me if any business function needs to be activated for making this tab available in NWBC HTML also?
Else do I need to raise an OSS message to SAP for any note implementations or is there a need to develop / configure this tab in Webdynpro ABAP / Floor Plan Manager framework?
I humbly request your response.
Warm regards,
Ram Nyayapati.
[email protected]

Thanks for your reply!
I'm create a theme in the UI Theme Designer.
1.
2.
3.
4.
5.
6.
Where I can see, what my theme is created well?

NWBC for HTML troubleshooting - stuck at splashscreen

Hi all gurus,
I'm quite new to NWBC for HTML and I'm trying accessing to an SRM system via transaction NWBC.
Notice I'm just a guest on that system so I cannot go for note applications directly; I could eventually direct tech staff in order to approach any problem but I'm trying anyway to figure out what could be the issue.
Shortly; launching the NWBC transaction, the usual IE window with role selection pops up. I can then select a "node" (say, the root one, /nwbc). Then the splash screen appears but when the progress bar reaches more or less half of the lenght, it freezes and remain stuck'd.
I can see from ST22 that after a while, a dump for TIME_OUT appears due to (I guess) an infinite loop in method GET_BREAD_CRUMB_HTML:
 23 if user_info-accessibility is not initial.
 24 concatenate text delimiter canvas_control_name delimiter skip_message delimiter_dot ente
 25 CONCATENATE `<a id='content-area' href='#masthead' title='` text `'>` html `</a>` INTO h
 26 else.
 27 READ TABLE nodes ASSIGNING <node> WITH KEY object_id = id.
 28 if sy-subrc is initial.
>>>>> WHILE <node>-is_top_level <> abap_true.
 30 READ TABLE nodes ASSIGNING <node> WITH KEY object_id = <node>-parent_id.
 31 if sy-subrc is initial.
 32 CONCATENATE `<a href='?sap-nwbc-node=js_req' onclick='pro54_submit("` <node>-objec
 33 INTO html. "#EC NOTEXT
 34 endif.
 35 ENDWHILE.
 36 endif.
 37 endif.
I guess there's something that should be fixed in terms of configuration; I checked in SICF transaction and /sap/bc/nwbc node is active (and all the subnodes); however, testing nwbc_test, an empty IE page pops up.
Could someone help me addressing what could be the problem, so that I can provide extra info to the techies?
Thanks,

Highly possibly the Runtime Environment and/or the Unified Rendering is too old. But in case the test page is empty, first is more possible. You can check the Runtime Environment with KBA 1864151 - please use section 2. Most current is PL37.

How to read the configuration for SAP GUI elements in Plant Maintenance module from SPRO and leverage the same in NWBC for HTML.

Dear Members,
Greetings for the day!
I am working on NWBC for HTML in Plant Maintenance module.
We have configured some changes in SPRO for customizing the UI elements( like visibility, mandatory ) like tabs and fields in transactions like IW21( Create Notification).
As of now separate parallel configuration needs to be carried out in NWBC for HTML in PM module to achieve the same UI features for creating notifications and this is time consuming.
Is there any way to read the configuration done in SPRO for the SAP GUI's and leverage the same in NWBC for HTML.
Appreciate your time in responding to this.
Thanks & Regards,
Ram.

>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7003,127.0.0.1:7103,127.0.0.1:7104
MatchExpression /app1
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
PathTrim /weblogic
</Location>
<IfModule mod_weblogic.c>
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
MatchExpression /app2
</IfModule>
<Location /weblogic>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
PathTrim /weblogic
</Location>
>
This configuration is weird little bit. There is MatchExpression /app1 and MatchExpression /app2 and at the same time two <Location /weblogic> sections. Are you sure you understand what that configuration stands for?
Try something like this ...
<Location /app1>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007,127.0.0.1:7103,127.0.0.1:7104
DebugConfigInfo ON
</Location>
<Location /app2>
SetHandler weblogic-handler
WebLogicCluster 127.0.0.1:7003,127.0.0.1:7005,127.0.0.1:7007
DebugConfigInfo ON
</Location>
where /app1 and /app2 are contexts of your weblogic applications.
http://download.oracle.com/docs/cd/E11035_01/wls100/plugins/apache.html
http://httpd.apache.org/docs/2.0/mod/core.html#location

NWBC for HTML Layout

My nwbc for HTML, for one system, looks like this: The icons don't appear; I couldn't close the launchpad navigation, and appears masthead, end of masthead ammong other things in the shell.
When it should look like this:
Can anyone explain me why this happens in one system and not in the others. I have the same software versions in all systems.

Hi Melinda Ludanyi ,
I just finished implementing the necessary notes to update the Unified Rendering and nothing changed.
Is there a place in the system where you can customize the shell?
Thank you for your time.

RH8 for HTML: Problem with Multilevel List in published topic(s)

I have discovered that working with the multilevel list and reapplying it (changing a level 2 to a level 1, for example) inserts numerous tags that don't show up in RH design view nor in an IE view of the published content, but the published help renders badly in Firefox (like a "justified" paragraph style that inserts broad spacing between words).
The bad thing is that broad spacing is added to a command where no spaces should be, which looks fine in IE, but renders like this in Firefox:
sqlplus XBRLDB/[email protected]:1521/ubmatrix
@C:\xbrl_database\database\Oracle\ verify_registration _v1_0 _1 .sql
The "source" for published content looks like this:
sqlplus XBRLDB/[email protected]:1521/ubmatrix
@C:\xbrl_database\database\Oracle\verify_registration
_v1_0_1
.sql
How do I prevent the tags from getting added to the RH project files? How do I remove them using the RH interface?
Why are they getting added in such wierd places?
PS: I have kept the paragraph style Numlist (which is how I define numbered procedures). I just apply the multilevel list to paragraphs tagged with this style. It's been working OK, except for the newly discovered problem above.
I'm using Verdana family and the numbers look good. I've only looked at the published HTML which looks like this: I
1 Do this
looks like this in a broser view:
1 Do this
Is this the 'expected' HTML code for numbered procedures (all this to precede a paragraph with a number), or is there a more efficient way to render numbered/mutilevel lists?

Hi there
I just created a small video that may be helpful for this.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Adding a custom css in sap_corby theme in NWBC for HTML 3.6.

Hi,Dear experts!
(I hope, I post a topic in the right section.. now)
I use the theme sap_corby in NWBC.
I'd like add a few changes in the design of the portal.
For example, I'd like add the custom.css style, user name and etc.
I've added in the table /UI2/NWBC_CFGCV parameters:
COCKPIT_TITLE = my title,
WELCOME_MESSAGE = my message,
CSS_URL = my css address (For example, /sap/bc/ui5_ui5/sap/zhcmi384_ui5/custom.css)
Next I open in browser (ie 10) link:
<server>:<port>/sap/bc/ui2/nwbc/?sap-client=<>&sap-language=RU&sap-nwbc-node=root
and I've see that COCKPIT_TITLE and WELCOME_MESSAGE is load well, but CSS_URL does not work.
How to load my custom.css file into NWBC?
If I want to try to edit the theme in UI Theme Designer.
When I want to create a topic in the designer. I only see active "open" button. Other buttons are disable.
I open the theme (the Copy). I make changes.
I choose to unlock. all is well. but where can I find my topic?
I do not see her anywhere.

Thanks for your reply!
I'm create a theme in the UI Theme Designer.
1.
2.
3.
4.
5.
6.
Where I can see, what my theme is created well?

SRM 7.02 NWBC for HTML

Hello All,
When we are using nwbc_launch url in SRM 7.02, always pointing to the role selection page (Just like below). We don't want this page to be displayed.
We want to logon to SRM directly. How to disable this below page. The look and feel logon page in this screen is good, compare to srm service.
Also when we use srm service the proper logon page is not displayed(see below), like nwbc_launch service.
Regards,
L

Hello Pedro,
exactly. I paste two screenshots from the shopping cart.
SRM700
SRM703

DOM tree for HTML

Hello,
How can I create DOM tree for HTML pages with java.
Can anybody tell me about good examples or relevant material for this.
Thanks
Tabbasum

JTidy. Rhino.

Screen personas for HTML in NWBC for Desktop

Hi,
Is it possible to use the webgui and therefore screen personas for HTML in NWBC for desktop. We are using a theme in webgui which we would like to use in NWBC in combination with a theme for WDA using theme designer.

Both SAP Screen Personas stacks are heavily based on the internal ITS of AS ABAP. SAP GUI for HTML aka webgui is one service, granted a major one, within the internal ITS. SAP Screen Personas seems to have separate theming options which would suggest incompatibility with UI Theme Designer. Maybe the UI Theme Designer and Screen Personas experts from SAP can comment, pinging Uwe Klinger and Tobias Queck. That said I think you should be able to use UI Theme Designer for webgui, as long as you use Unified Rendering Lightspeed controls. See SAP note 1852400 for details. You may have to use the sap-theme parameter and make sure you have the latest Unified Rendering corrections.

NWBC Desktop running GUI for HTML

My NWBC Desktop installation is running all SAP transactions using the SAP GUI for HTML. How can I fix my NWBC installation to use the desktop SAP GUI instead of the GUI for HTML?

First of all a supported SAP GUI for Windows version needs to be installed, it is best to go with the latest one which is 7.30 PL 9. That said at least 7.20 PL 8 is required. Secondly you have to maintain connection entries both in SAP Logon as well as NWBC connections. Thirdly make sure that in NWBC connections the SAP GUI Logon Description field matches the description of the same system in SAP Logon. If it still isn't working, activate trace in NWBC and share the result as an attachment, not embedded in the body of the message.

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

WebDynpro proxy page with Webdynpro iView and SAP Gui for html iView

Hello,
I have a requirement to have a page that has at the top of it a webdynpro for java iView screen with several links that when pressed pop-up various data pulled from the back-end. This part is fine and presents no problem. Beneath this the requirement calls for a SAP Gui for HTML iView to be displayed. Which is no problem either. The problem occurs when one of the links in the java webdynpro application at the top of the screen is pressed it causes the SAP Gui for HTML portion to refresh and come back to the beginning. So for example you first navigate to this screen and you go into the sap gui for html portion and drill into 2 or 3 screens in the sap gui for html transaction. If you then press one of the webdynpro links the sap gui for html (which is a separate iView) refreshes and you are taken back to the initial screen. This only occurs when using a web dynpro proxy page. If I use a standard page the SAP Gi for html does not refresh. Unfortunately there are other things not mentioned here that require us to use the webdynpro proxy page.
Any help is greatly appreciated,
Bert

Use System admin -> System Config and find your system in the PCD (under portal content). Right click and open -> permissions. Find a user or group or role and give it the end user permission. I'd suggest the group Everyone.
Cheers

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.

NWBC for HTML: Warning with IE 10

Similar Messages

Maybe you are looking for